Counting matching models…
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a…
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
A very simple test of your first layer
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Simple single layer cube to help you tweak your z offset. Print at .2mm Layer height Scale X,Y, if you want it to cover more of the build plate
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
Hindus believe that over 15,000 years ago, predating all religion, Adiyogi, the first Yogi, transmitted the science of Yoga to his seven disciples, the Saptarishis. He expounded 112 ways through which human beings can transcend their…
This is a simple 70mm x 70mm first layer test & adjust print.* .3mf files included for PLA, PETG & ABS BEFORE PRINTING THIS: Please consider - -Your build plate and print nozzle are clean -Follow your printer manufacturer's methods bed…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . After a lot…
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
I needed a better way to configure my first layer. I use this print to do live z adjustments. Print instructions I find this to be a good test. it handles allot of the shapes that will ruin a print of the first layer does not have a good…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Stop it! Yes, I'm back with more bad puns and a useful print. This practical, easy-to-print design was something I threw together in Fusion 360. I didn't want a Hodor (sorry) or a solid doorstop. Instead, I wanted something that would…
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
TARS- Interstellar: Print-in-place -------------------------------------------------- UPDATE: Now including KIPP and CASE versions! Both of these versions have their text extruded for multi-color compatibility v1.1 now has stronger…
10/9/22: Permissions on the Google sheet have changed to view only so once you open up the link, please make a copy for yourself! Also i would advise you to take a screen shot of your original settings if they are currently working for…
Update 9-11-2022: Added a version for 0.8mm nozzles. Tick marks of the old version didn't print correctly with a 0.8mm nozzle. Update 1-20-2022: Added a PDF file with a template, to write down the Live Z values used in the calibration.…
This is a Calibration Matrix for the Prusa Mini to calibrate the first layer. It consists of 15x15mm squares that are 0.2mm tall. The Squares are layed out into a 4x4 Matrix and are printed sequentially starting form the front on the…
DISCLAIMER: Use at your own risk! Not responsible for damage to your printer or accessories! Important: Always restart your printer after using this file! This file uses the G92 command, which changes your printer offsets. These offsets…
Easy To Print Doorstop !!
This is a simple project containing 6 models of different sizes for testing how level your bed is. The models are 1 layer thick and in some common print bed sizes. You can always resize as needed, too. Enjoy!
Print and live adjust Z on the markers, you can start with larger increments (100, or 50) and then fine tune with smaller ones (10) when you are closer to your target.
TL;DR Single layer whole print bed, see how good or bad it comes out, no change to hide anything. Collection tools, 3D printing update 2026.1001 - Sovol ZERO added Sovol ZERO -> the tiny blue square ES_Sovol_Zero_152x152x0.2.3mf…
-Prints with no supports or brims -Tension fits on your door -No tools or assembly -Fits door gaps of 12.5mm or larger You can scale the model in you slicer to fit different door depths. Currently sized to fit standard American interior…
Stormtrooper First Order helmet wearable Link to the newer and more accurate Model https://www.printables.com/de/model/39467-stormtooper-tfa-helm
I created a first layer test for myself after the prusa got a new heater block. It has the shape of an octagon, and so I can now calibrate the first layer nicely. Always only benchys or cubes print after a repair I did not want. The print…
This is a first layer calibration test for any printer. It consists of 5 identical tiles. Recommended print settings layer height: 0.2 mm fill angle: 0° perimeters: 2 skirt: 0 first layer speed: 25 mm/s It should be centered on the bed…
Simple print for calibrating the first layer and bed leveling. Designed for 0.2 mm first layer but can easily be adapted
first layer calibration 21x21cm if your printer is corecly calibrated this should look like foil. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: fiberlogy PETG blue…
This is a 4 x 4 inch square used to help calibrate that important first layer.
Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…
Centauri Carbon First Layer Test to make sure your first layer is up to standard. The 3MF file is already set in the print bed, so you don't need to adjust it.
Elegoo Neptune 3 Max First Layer Calibration Test Just slice and print as aligned!
You downloaded it? Please like :) It doesn't cost anything and it encourages me to implement more projects :) FIRST LAYER (layer 0,2mm and squares 20x20 mm) size: 100x100 150x150 180x180 200x200 210x210 235x235 256x256 300x300 320x320…
First Layer test for Creality K1 220x220x0.2mm
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
Doorstop Pocket Version – The Perfect Travel Companion Product Description The Doorstop Pocket Version is a compact, travel-friendly solution to keep any door securely in place. Designed for maximum portability, it fits easily in your…
This model prints a whole layer on the Mk4 build plate, to test if it is as perfect as it should be It fits the whole build plate exactly and has the hight of 0.2mm Print with 0.2 layer height, to have exactly one layer can of course be…
Another first layer test print. This print makes use of as much of the bed area as possible, without having to disable the filament cutter standoff. X1C users should print without the flow calibration pattern enabled. Useage 1: A simple…
A small and minimalistic bracket for mounting one of my powerstrips. Same bracket will work for both sides. Update: 22.04.2023 - Added drawing with some dimentions. The powerstrip I'm using is a little bit ‘fat around the belly’ 🤭The…
MORE MODELS BY WMONTOZA DOOR CLAMP CAT DOOR STOP SHELF TABLET SUPPORT DESCRIPTION Door clamp/door catch/door holder/doorstop/door stop dog Trava de porta / Calço de porta cachorro Abrazadera de puerta perro Türklemme Hund Arrêt de porte…
Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. A few of the parts, are sadly missing. If anyone…
Author: Prusa Research (Dominik Sauer)
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Perfect collection to print metallic or cartoonish. These are the characters included: - DENDE - DODORIA - FREZZA - VEGETTA - ZARBON Thank CREATIONSISHI for this spectacular pack
First Layer test for Creality K1 MAX with 0.1 mm layer high and 0.2 mm layer high.
Print resolution: 0,20 Material: PLA
Used for testing bed level. After noticing defects in the first layer using PETG, this is a helpful guide to achieve smoother results. I suggest sizing down by 50% or even 35% to speed things up. Level bed with the knobs Re-Calibrate Z-…
A practical doorstop available in two printing variants so you can choose the ideal setup for your printer and materials. Both versions are designed for reliable grip on the floor and easy printing. 🌀 Variant 1: Full TPU This version is…
This is a simple zig-zag to allow a visual calibration of first layer. This has the same purpose of the V2_Calibration.gcode that comes with Prusa's. Check Prusa's Video . This have more zig-zags to allow you to keep tuning until you are…
Hello again! I know that I had already published the top caps before but I have made small changes to them looking for easier printing and now I am adding the STL and 3MF files to make the 3 remaining balls of the first generation:…
I made these three "Custom First Layer Calibration Squares" to help you dial in your perfect first layer. When printed properly they will come out as a solid single sheet of plastic. Its a fast easy print! .20mm Layer Height Single Layer…
First layer calibration GCODE for Prusa printers, as implemented in Prusa MK3/MK3S firmware ( https://github.com/prusa3d/Prusa-Firmware ), originally created by Marek Bel. Enclosed GCODE files are generated directly by the firmware source…
It's HUGE! It stands about 6 inches tall. It's semi coiled and if it could be stretched out it would be over a foot long. This makes it life-size! You'll need supports and you'll need them dialed in well!
Pferde Unterstand - Horse shelter for Schleich horses easy to print, easy to assemble Print instructions Rafts:No Resolution:0.3 Filament: any PLA or PETG
I like to start each day with a fresh cup of coffee and my personal Bed Level Test. That ensures a great morning and perfect prints every time! The test printed with red filament is ideal. The extrusion lines are connected and cohesive.…
Thank you to GKMAKEIT for the original. I found this so helpful at getting the perfect first layer setup that I found myself using for all different types of materials - I have now remixed it for use on my Ender 3. In Summary, you adjust…
Eine kleine Hilfe um Fenster bei durchzug offen zu halten. Zur Aufbewahrung einfach am Henkel befestigen oder an einem Nagel aufhängen. Gedruckt habe ich den Fensterstopper in TPU damit er elastisch ist. A little help to keep windows open…
Replacement ripcord, the other ones on thingiverse did not fit 100% for the burst or broke easily. Kept the length about the same as the original cord. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Elegoo Neptune 3 Pro First Layer Calibration Test Just slice and print as aligned!
A 25mm square single layer test print for checking your 1st layer calibration. For minimum clean up there is no brim, and a small handle to pull the print off the bed without removing the sheet. g-code for both PLA and PETG Two versions…
Just a quick make for you to start your season while waiting for kits!
Remix of the famous “Rugged Box (Parametric)” by @Withy. I made the box a bit smaller to fit some bandaids I had at home and added a First Aid symbol on the lid. I put mine in the kitchen, in case someone cuts himself :) INSTRUCTIONS: You…
This is my take on building the perfect gaming mouse. Just 27 grams, without sacrificing ergonomics. It’s based on the Logitech Superlight 2, and in my opinion, it carries the legacy that Logitech has built over the past two decades far…
Your very own articulated T.A.R.S. and friends. Separate files for the four Interstellar robots including T.A.R.S. C.A.S.E. K.I.P.P. and P.L.E.X. measuring at ~80mm x ~120mm x ~20mm Easy print in place with no supports needed. I recommend…
Das ist ein Ersatzteil für den IKEA Pax. Es ersetzt die Kleiderstangenhalterung die gern mal ausbricht ;) Druckt es in PETG oder einem anderen flexiblem Matierial - der Schnappmechanismus muss sich etwas bewegen können. Es handelt sich um…
I had an old print of a similar doorstop. When mine went missing, I searched the internet for the original design file. Not finding it, I recreated the doorstop from memory. Turns out the original was still hidden deep on Thingiverse.…
Model is 100mm x 100mm x 0.24mm high. Easy to slice and print then adjust z on the fly giving you an ideal visual of your first layer. Also good for running finger nail across for finer tuning of a smooth first layer. (Also a nice easy…
This model is compatible with the lego system.
Fensterstopper ohne Bohren, ohne Kleben
This is simply an egg with ears… Earster Egg. It is the first thing i sculpted and i thought i start with something easy. The Earster Egg in the Picture was printed at 0.2mm layer height and without infill.
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
This is a remix of the Ranger from Mark Toth on Grabcad. Added thruster details, solar panels and landing gear. Model is 260mm in length. Will be adding a decal sheet soon. Enjoy. If you haven't seen the movie, it's a great sci-fi film.…
Description This is a quick test to do to find out which settings are best suited to print the first layer. Print instructions Just use 0.2 mm of layer height PS: Like if you appreciate, it will help me a lot :)
Simply a test model of the first layer with dimensions of 10 cm x 10 cm x 2 mm.
Schitt fuer Schritt Anleitung (PDF) ein gerade verzahntes Zahnrad in FreeCAD V0.18 zu erstellen. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,1 mm Infill: 40%…
Sandworm based on Dune 2021. Roughly the same size as the first player marker in the board game Dune Imperium. ~43mm in diameter. Designed to fit into my Dune Imperium insert https://www.printables.com/model/272184-dune-imperium-insert
Loved this print on Thingiverse by @Mikencks but needed a thin profile for low door clearances. His doorstop is a remix of @Huanksta Yoda bookend https://www.thingiverse.com/thing:2950013 This is my first print project, learning a lot of…
Struggling with inconsistent first layers, wavy patterns, gaps between lines, nozzle digging into the build plate or leveling related error codes? Been told to adjust your z offset? Looked at your bed mesh and tried to adjust the bed? Not…
cool table decoration
This is a simple, minimalistic base to set Valve's Index controllers on for storage and charging. The base measures 3.625"W x 3.625"D x 2.5"H. The correct charging cables must be used to work with the base properly. A small capsule-shaped…
Bedarf keiner Anleitung ;-) Und da ich STL nicht ausstehen kann hier auch die Fusion Datei
Pour calibrer la première couche de la Flsun V400 de façon uniforme.
Halo-inspired wall-mounted first aid kit! Has room for a roll of medical tape, adhesive bandages, eye drops, tweezers, gauze pads, alcohol pads and more! Require two (2) 8x3mm magnets to form the closure. Cavities are modeled, magnets…
Replica of the Thirst Zapper from the video game Fallout 4. Photos show the printed pieces after they've been sanded, painted, and glued together. For more information on finishing this model, check out the video we filmed on the process…
After the bed calibration with sheet of paper I recommend you print a first layer calibration test for better ressults in your 3D prints. Printer Ender 3V2 Material: PLA
English version bellow. Buďte opatrní pro příliš nízké nastavení trysky, můžete si poškodit plát! Kontrolujte nastavení výšky pomocí očí v úrovni podložky! Model slouží pro kalibraci první vrstvy. Zvolte si počet “zoubků” podle toho jaké…
This model has been created to calibrate our first layer using the full printbed.
![First Layer Calibration Pattern [from Prusa MK3/MK3S firmware]](https://media.printables.com/media/prints/104767/images/1049067_18c18458-fa9e-4654-902c-b1e97a049d27/4c891d12cf05afc76616116d7b423361_display_large_10.jpg)
![IKEA Pax Kleiderstangenhalter [Clothes rod holder]](https://media.printables.com/media/prints/10395/images/86352_da05d17d-0974-48e4-ab49-c5e30a91a323/ikea_pax_10395.jpg)
