Counting matching models…
I redesigned from scratch my favourite silica container by Malolo. I loved absolutely everything about it, except that it prints a little slow. I used horizontal slots so that it prints much faster with less retractions and hops. In 0,3mm…
REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
The ULTIMATE filament spool holder. THANK YOU FOR DOWNLOADING IT! IMPORTANT, PLEASE READ: 1. If you have problems with tolerances, please print this model by Asraff Amzani (thanks for) and carefully read the descriptions. THIS IS…
Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools. Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of…
Print approx. €5.40–€6.60 excl. taxPreliminary estimate for PETGSource material: PET
A volumetric calculation was used to determine the precise placement of the lines, as the spool diameter decreases more rapidly when it’s nearly empty than when it’s full. Three versions have been uploaded: Version Description Percentage…
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for PETGSource material: PET
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for PETGSource material: PET
This is a spool for 50-100g 1.75mm filament samples such as the ones included in MakerBox subscriptions (version A also fits the original zipper bags) ;) I have also included a spool for 150-200g 1.75mm filaments such as cleaning and high…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Printable 2kg spool holder for Original Prusa MK4. The spool holder was specially designed for Orignal Prusa MK4 and Prusament 2kg, but it can be used for any spools. Perimeters: 2 and more, Infill: 30% rectilinear.
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for PETGSource material: PET
About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…
Update: "wheel_holder_noHex.3mf" is uploaded if the hexagonal cutouts is not for you. Made a simple cad model to hold a heavy Solder wheel for people to use at my workplace. Solder roll supported: 64mm - high max 80mm - diameter max 14mm…
This MINI+ spool holder was specially designed for Prusament PLA Recycled with a 2 kg spool. It ideally fits for use Prusament 2 kg spools, but it can be used for any spools thanks to adjustable spacing. You will need: 4x screw M3 x 8 mm…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Attention: we are switching to 1 kg refills, so this 800 g version is unfortunately no longer compatible. The new 1 kg Masterspool can be found here: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill…
This is my own design for a filament spool holder to be put on a roof or wall. UPDATE 07-26-2019: Added version 2, beefier build UPDATE 04-15-2021: Added version 3, more beefier build and extended the base to reach the mount screws more…
Print approx. €4.62–€5.65 excl. taxPreliminary estimate for one variant
Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
I recommend printing the Solder Scroll tool and the modified spool from PETG. Press the larger area onto the backing, then snap the two parts together. After winding the soldering wire, clip it with the wire cutters flush with the coil.…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
Print approx. €22.26–€27.21 excl. taxPreliminary estimate for PETGSource material: PET
you need : 4x bearings (the same as the ones in the last picture) 4x M4 nuts 4x M4x16 allen screws print 2x the rail print 4x the spool holder
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
The PERFECT filament spool holder This spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps…
This enchanting 3D Printed Ghost Decoration with a captivating twist - it illuminates with a mesmerizing glow when you place a tea light inside! This spooky and whimsical ghost is the perfect addition to your Halloween decor, adding an…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. In case you have the injection moulded part delivered with your Original Prusa MK3S+ printer, check the alternate version:…
Print approx. €6.94–€8.48 excl. taxPreliminary estimate for PETGSource material: PET
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! 2 sided spool and spacer. Must print all 3 with most spools. Must adjust spacer to your spool size (15mm height seems to…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
Overview A simple spoon rest to have beside the stove to hold dirty spoons/utensils while in use to keep your bench clear. Note: Print with PETG for added heat resistance, wash by hand in warm soapy water and leave to dry on the window…
Print approx. €1.26–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
This model is based on the stock spool holder mount that snaps on the top bar of the Creality Ender 3 S1 (Pro). Use it as a drop-in replacement part or in addition to the original one. With a second mount you can fit a total of three 1kg…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
Simply print with the Bambulab default settings 0.2 in PLA. For coils 55 mm x 64 mm and 50 mm x 64 mm Printing time approx. 1h49m Use 6 x used AA batteries The screwing revised . Added empty containers to fill with e.g. plaster.
Print approx. €4.59–€5.60 excl. taxPreliminary estimate for one variant
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
Modified the original “Last Meters Mini-Spool” of AlexStinson to be even more small and improved some features. You have only a little bit left on the big 1kg spool and want to save space? This is for you! You have some 50g filaments…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…
Print approx. €3.28–€4.00 excl. taxPreliminary estimate for one variant
The standard Prusa i3 MK3 spool holder is almost totally vertical which makes it take up the most possible space in the height direction. I had a height restriction due to the shelf my printer was going to sit on, so I designed this as a…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
This is an adjustable print-in-place spool for filament samples. No assembly needed, just remove from build plate, snap off the built-in supports and you're good to go. How to use: Adjust the arms inwards until you can fit the sample roll…
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
A remix of a great spoon rest! Due to the orientation of the print (flat), the rest 'nibs' are a weakness. One of them broke for me on the original during a wash. Remix Changes Thicker rest wall (+1mm) Support ribs Links & Reference…
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Remix of Squash ball feet for Prusa Mini. All brackets bolt into aluminum extrusions and support the electronic's box. Highlights: Massive Noise Reduction Improved Stability (Lifting the magnetic sheet won't tilt the printer) 6 Support…
Wanted to move the spool holder off my printer to reduce vibration so I designed this simple wall mount bracket. Installation is simple, drill holes and slide the inner piece onto the outer piece ("bottom" text should face down on inner…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
I wanted to improve the plastic input to my extruder, because just with the original spool holder from prusa the spool wobbles a little bit due to the friction between spool and holder. After a quick search found thousands of ideas, most…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Printable spool holder for Original Prusa MK4.
A brief video deomonstration: https://youtube.com/shorts/kiZKUkexKrg?si=kBOF8F9uXhrnBcDT Inspired by the struggles of some printers to use cardboard spools, this device will ensure level winding of filament onto a new plastic spool. Run…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for PETGSource material: PET
A compact and reliable filament rewinder based on a linear counterweight mechanism that can be produced in a single 11 hour print. Provides a complete filament management solution eliminating the need for the space wasting and difficult…
Print approx. €10.88–€13.30 excl. taxPreliminary estimate for one variant
Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…
This is a snap fit container for dessicant that fits in a spool when bagging it to keep it dry. Print instructions Printed with PLA with a 0.40 nozzle Added scad file for anyone that wants to change the size
This is an adapter that allows you to convert an empty Prusament plastic spool to a master spool. Motivation I love the concept of the master spool, but it's quite a heavy print (6+ hours for part B, 12+ hours for Part A). I saw that the…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
I needed an easy and fast printed spool for all the filament samples I've recently acquired (I am still quite new to all this and I want to test all the filaments I can get my hands on to). I didn't want to spend days printing, nor big…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
A holder for silica desiccant pearls to keep with spools in dry bags or boxes. It uses only 2.1g of filament and fits into the inner opening of most filament spools. The 3MF holds 6 instances, which print in 36 minutes. You can delete…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Works with original spool. I always have trouble printing hex designs. So i did a spoke design. This has much less retractions. During design I saw that it reduces print time if you only have one center hole so its done this way. original…
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant
Joe3020 fitted an adapter for 10MM bearings for Overture cardboard spool, I remixed it to work on most spool holders. This adapter to insert into certain cardboard spools to reduce the amount of cardboard dust from spinning against the…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Simply, this is a filament sample spool for 1.75 filament. Is another one needed? Probably not. But I had a specific need that other spools did not have. UPDATE: I was talking to someone that was having difficulties screwing the two…
This holder has been specially designed for Prusament filament samples. However, it can be used for any samples or remnants of filaments from the spool. Up to three samples can be placed on the holder, so it is also suitable for small…
Print approx. €16.56–€20.24 excl. taxPreliminary estimate for one variant
*Note The first file uploaded was missing one set of bearing holders, so the corrected file was re-uploaded. In consideration of cases where M3 cap bolts are difficult to obtain, we have prepared a derivative version that does not require…
Print approx. €7.64–€9.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of Michael Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Note It is important to print the base with supports and in the position that is shown in the file, so that the small hook is stable enough. Best is to use my ready gcode. If you want to change the infill it is of course no problem, just…
Print approx. €5.35–€6.54 excl. taxPreliminary estimate for one variant
Origin I reworked original idea from alecs.form because i need to fit the holder on printebed of Prusa MINI. Size is 180mm x 114mm (modeled from scratch using Fusion 360) How to fit them Ikea SKADIS use alternating pattern of pegholes -…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for PETGSource material: PET
Big filament spool holder for 2,6 kg or 1 kg spools You can simply place the spool holder or screw it on the IKEA Lack printer enclosure. To change the filament, simply remove the screws on the top and slide the spoolholder out to the…
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET
Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…
This 3D model is designed for a robust and functional filament spool holder, optimized for 3D printing in PETG to ensure high durability and heat resistance, particularly suited for environments with higher temperatures. The design…
Print approx. €7.90–€9.66 excl. taxPreliminary estimate for PETGSource material: PET
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the community. Thank you!…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for PETGSource material: PET
Spool holder designed with sliding sections to allow different size spools to be used. Uses (4) standard skateboard bearings to allow spool to rotate smoothly and quietly.
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
I made this mount to store spools on my Honeycomb wall while keeping the overall ascetic of the wall design. It is not intended to be used to feed the printer, this is just for storage. I designed the holder to be multicolored on the end,…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
I need to move my Elegoo Neptune 3 Pro printer to a smaller table, which is around 40 cm in depth. However, the original filament spool holder stuck out too much at the rear that I have to pull the table away from the wall to accomodate…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant
Cardboard filament spools do not unwind easily on a spool holder. Two of these rings reduce the friction. On user request, I added 2 larger versions: Standard is 54mm diameter. This one should fit Larger version with 54.4mm diameter for…
This is what I call a Storing Maching, it's a robotic spool tower, which has a mecanism in it that open and closes the drawers via the rotation of a nema 17 Explanation Video : Download Files: Assembly Guide PDF…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A parabolic filament spool holder/roller. Just set it and forget it. The parabolic design of the roller keeps the filament reel centered. Requires 4 skateboard bearings (i.e., 608zz Double Shielded, 8x22x7), and snaps together. I grew…
Overview A simple retractable and locking spool for holding 20m of 3mm paracord with built-in storage on the back for hanging hooks/clips to use on the line. I would love to see any makes so please post some pics, you get prusameters too!…
Easy screwing assembly! Print settings Material: PETG, PLA Layer height: 0.3mm Supports: no Perimeters: 2 Reference size: White wire 16AWG 20m - Spool scale factors: 140% Red wire 16AWG 10m - Spool scale factors: 100%
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…
Print approx. €4.06–€4.97 excl. taxPreliminary estimate for one variant
I used to operate auto rewinder spool holders like https://www.printables.com/model/199248-narrow-double-stand-for-75mm-integrated-auto-rewin inside my dry-box. The challenge with those was that it always was kind of some fiddling with…
Print approx. €8.49–€10.37 excl. taxPreliminary estimate for PETGSource material: PET
Spool Box - "Das Filament" spool - Use M2x6 Screws with holes direct beside the outer ring.
Modular desiccant/silica filament spool size container. Optional top to hold Hygrometer. I like to store one to five roles of filament in a ziplock vacuum seal bag. I wanted a desiccant holder that could grow or reduce depending on how…
Ceiling or under shelf hanging mount for the Universal auto rewind spool holder. with dust filter. A huge thank you to Vincent Groenhuis for his brilliant spool holder.…
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
spool holder form Original Prusa MK3 with filament guide. this one have low angle to fit printer in lower shelves.
Print approx. €4.65–€5.68 excl. taxPreliminary estimate for PETGSource material: PET
This is an auto-rewind spool holder that automatically rewinds the spool on filament changes. It replaces the filament buffer completely! When the filament is dragged into the printer, a weight is lifted. When MMU unloads the filament,…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…
Print Settings Material: Prusament - PLA Opal Green / Gembird - PLA Plus Black Matt / Gembird - PLA Milky White Nozzle: 0.4mm Layerheight: 0.15mm Brim: If you feel the need Post Process Not necessary
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
In order to save some space I reduced the original Anycubic Kobra 2 Pro spool holder to a width of 70mm. The original is 90mm. Compatible with my Anycubic Kobra 2 Pro Spool Mount: https://www.printables.com/model/855122 That combination…
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for PETGSource material: PET
Diameter 7.7 mm Length: 120 mm I made these so i could use the Prusa Printer Enclosure V2 (MMU2 compatible) but I didn't have the MMU or MMU2 so I didn't have the metal spool rods that I could re-use but I did want to use the 5 spool…
I created this adapter to still use the original prusa spool holder with my enclosure.
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
Replacement holder if the creality spoolholder needs to be used elsewhere Layer 0.2mm Perimeter 4 Fill 15% Gyroid Supports yes The model is designed in the absence of a digital spool rack…
A TUSH style top mounted roller filament holder. Two sides for double 1kg spools or extra large 2kg+ rolls if you put it in the middle, across all 4 rollers. I've seen it used with 5kg spools. Having a sturdy base for the heavy spool to…
Modification of 5-reel spool holder on Prusa Printer Enclosure v2 to just one reel, for users who want the V2 enclosure but don't have the MMU system installed. This is a modification of the spool holder in the V2 enclosure files…
From my experience, only Prusament rolls fit properly in the grooves under the Mini. And even then, it doesn't turn super smoothly. I made this lazy Suzanne so that I can use it with any filament brand, no matter how wide the center hole…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
Spool holder compatible with MMU3 layout thanks to the filament guide included into a side part. only one specific side to print if you want to adapt your Ultimate Spool Holder for MMU3 layout For assembly, I advice to position cylinder…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Kitchen spoon rest, designed from scratch inspired by the shape of my porcelain previous one (RIP). Printed in food-safe PETG
Print approx. €18.59–€22.72 excl. taxPreliminary estimate for PETGSource material: PET
A filament box based on the familiar hexagon style but redesigned for the integrated auto-rewind spool holder v5.6. by Vincent Groenhuis. This box fits the 75mm version. I designed this for my MMU2S to remove the buffer and keep all…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Why should I use this desiccant container? It's sized to fit into any spool from .5kg and up. It uses much less desiccant while also maximizing the water absorbing surface area. The desiccant can be rapidly dried in a microwave,…
Print approx. €10.13–€12.38 excl. taxPreliminary estimate for one variant
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
I was looking for an adapter that rotates the spool holder 90 degrees for DD extruder but I could not find any. All others models were for Ender 3 V2 which has a V-slot in front of the top extrusion which Neo does not have. This one uses…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
![Best Spoon Rest Ever - Reinforced [remix]](https://media.printables.com/media/prints/a3e31f33-ec0e-4d2e-992c-517e7d5a8a9e/images/12127586_9e05b6a9-0dae-4f2d-8207-1ffd6c22a79d_73eeeebd-3e64-4a36-ab87-c28d882c365f/20260222_132201-photoroom.png)
![[Screwless] Spool holder for Prusa MINI](https://media.printables.com/media/prints/145176/images/1372044_b3311120-21ed-43c6-acb3-b6fc0a978df6/cg.jpg)
