8,383 models
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Sometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
LED strip clip. Simple and works very well. Screws on one side only, so very compact. fits 10mm strips. Do not attempt to print on its side, screw will split the layers and crack the print….. I printed 24 of these all at once with no…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
UPDATED → 20.02. 2022 Removed bottom text due to customer comment UPDATED → 13.04. 2021 Changes: Updated STL, 3MF and G-codes Thicker bottom Reduced overhang at the handle at the bottom Thicker walls due to waterproofness. Added version…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET
Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET
Be sure to upload makes!
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Industrial Wargames Wall - Section 1 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €8.41–€10.27 excl. taxPreliminary estimate for one variant
Hello ! Wellcome to my little office with Prusa MINI +. I made industrial lamp with concrete base, retro bulb and soft pad made of recycled rubber. O.10 DETAIL Prusament PLA No supports 15% We will need: Concrete (fine concrete with small…
Print approx. €5.04–€6.15 excl. taxPreliminary estimate for one variant
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for one variant
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
Print approx. €3.64–€4.44 excl. taxPreliminary estimate for PETGSource material: PET
Version 2.2 now available Minor errors fixed (see version release notes below). Assembly Guide finished! The assembly guide has now been been completed, containing 38 pages with over 60 diagrams to assist in creating the banjo from start…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
I couldn't find an inconspicuous Apple Watch holder, so I decided to make one. The first one I made was mounted with a small Command Strip to my bedside table, with the cord held closely to the surface of the table to prevent accidentally…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
The model can test your stringing and oozing behavior quite efficient up to 5 colors. The 3mf file has already sliced the 5 colors for you. It's sliced in the Alpha 2.7 Slicer version with Inputshaper, be aware about that. It's at the…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Roll up your string of tree lights on this reel. It will reduce the anxiety next year when unraveling the lights. During the unroll this year, the tangled lights brought me anxiety. So, I am going to try this in January and December 2023.…
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
This decorative lamp is meant to represent a pedestrian traffic light. Inside the housing there is space for LED Strips. I powered my version with an ATTINY 13a, which runs a little script for the light sequence. The code can be found…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €21.78–€26.62 excl. taxPreliminary estimate for one variant
The Philips Hue outdoor LED strip comes with clips with which the strip can only be mounted on a surface with 90° degrees angle to the LED strip, but not one with 180° (e.g. a vertical surface or wall, strip pointing up or down). These…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
Practical magnetic separator for paramagnetic beads fitting 8 x tube 0.2mL PCR tubes. We use them for routine DNA/RNA purifications and general NGS library preparations. Easy to personalize with your lab name or logo. It nicely fits 2 x…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
This ostrich sculpture captures the tall and elegant stance of the world’s largest bird. Ideal for collectors, nature-themed displays, and classrooms studying exotic wildlife. Printing : Suitable for FDM and resin printers Supports :…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have an Ostrich Family for you for a diorama, or just for play. A very nice figure. It is suitable for coloring. My children absolutely love it :-). Important: If by chance…
Print approx. €5.83–€7.13 excl. taxPreliminary estimate for one variant
I needed an under desk mount for my surge power strip and designed the clip to fit along the grooves with tension. The clips have holes for using small wood screws or you can use double-sided thin tape as needed for your own mounting…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Industrial Hercules DJ Knob Set Set of 3 Knobs for the Hercules DJ Board.
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
Change strings on your ukulele faster and easier. Internal dimensions for the tuning peg are 9x19 mm - will fit most ukulele brands. Only 10 grams of filament. Designed as print in place, prints as 1 piece, no assembly needed. Just…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Needed holder for power strip on my Lack enclosure. Built in OpenSCAD, so you can adjust to your own size of power strip. Printed in PLA, works fine.
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Winkelhalterungen für 90 ° + 135 ° für IKEA-LED-Streifen 24 Volt (403,596,95), 13 mm
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
As much as I like string lights, I think they don’t really fit the vibe of the spooky season. I was thinking about how I could add a little halloween flair to my battery-operated LED string lights and this is the result. I’ve used…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Use one side as dispenser, the other is used as weight to ease the use. When one side is empty, simply turn the dispenser around to get wipes from the other bag! Printed it in PLA, though every material could fit.
Print approx. €11.21–€13.70 excl. taxPreliminary estimate for one variant
This zebra sculpture captures the unique beauty of its striped coat and elegant posture. Perfect for collectors, educators, or nature lovers looking to add a safari touch to their shelves. Printing : Suitable for both FDM and resin…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
My girlfriend always complains that cigarette packs are everywhere, which is why I designed a holder with Fusion 360. Elegoo Neptune 4 Plus 0.2 mm infill: 15-25% support: No Elegoo Pla pro 150mm/s
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
The winding Möbius strip is a very good example of a shape that does not have a single flat surface. As such it is the nightmare of any 3D maker as it requires support along the entire model. But what makes the Möbius strip annoying also…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for PETGSource material: PET
25mm industrial bases, that fit my Miniature Painting Handle and Base Set Miniature Painting Handle and Base Set https://www.thingiverse.com/thing:6247736 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Tidy desk, happy brain 🧠✨ This U-shaped holder lets you mount a power strip or similar rectangular item under a desk, on a wall, or inside a cabinet using two countersunk screws. The open top lips keep the strip securely in place while…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
In order to use my Philips Hue Outdoor Lightstrip as a boundary between a flower bed and the gras I needed some stakes that hold the strip. I modeled it in a Twitch livestream. I you want to follow me on Twitch for more 3D modeling and…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
I made a holder for my LED strips from BFT Lightning. In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67. The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
With this sturdy and versatile mount, you can easily hang string lights for a warm, inviting atmosphere. Perfect for restaurants, patios, or home decor, these mounts keep your string lights securely in place while allowing for…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
My wife needed a hook, that was easily removeable again, for our Christmas decoration and since I couldn't find any useful design I just quickly made my own. Nothing special, quick and easy print, designed to be used with Tesa…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
The original model use light bulb for light source This base able to use Ikea strimsav led as light source Support required for printing
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Use this model as a gauge block, radius gauge and bolt sorter. Makes and Comments Appreciated! Happy Printing!
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
printing with prusa slicer (Profil: 0.20mm QUALITY | Infill 100%)
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.28x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.69–€5.74 excl. taxPreliminary estimate for one variant
Printed in three parts that need to be glued together. Optionally, you can insert two 3x30mm steel dowel pins to increase the strength of the glued part. Material 10mm wide 12V LED strip 4pin XLR male connector 80cm cable 2x 3x30mm steel…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Every time I vacuumed my bedroom, I was annoyed by the power strips lying on the floor, so I made this holder to attach them to the bottom of the nightstands. The bracket can be screwed onto any flat surface and mounts the power strip at…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for PETGSource material: PET
Another niche art item. While creating art I often need strips of tape that are exactly 1/16" or 1/8" or ¼" (etc.) wide. While I could pull out a cutting mat and a ruler to do it, I wanted a quicker, easier option. This simple jig has…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
This is an other version of the RC3. The forehead part is thinner and more flexible. This help the face shield to fit much more comfortably on every shape of skull. This is important when you have to wear it all day long. Print…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
Can be printed with no support. Print at 195C to avoid stringing. Rotate the model so the base is vertical. Made for tealights with a diameter of 39.5mm
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
If you want to chop and distribute your coffee grounds before tamping so that no channeling occurs when the coffee is drawn, then this tool is the right one for you. You don't need expensive needles, you can simply use a standard 0.9mm…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Fluid Distribution Cap for Hydroponic Agriculture applications or a Microgreen Machine. Distributes water to up to 8 ways. It is designed to work with 1.5" (1 ½") PVC pipe threads, and 0.25" (¼") standard rubber irrigation hoses.
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
54mm width 41 mm height To get enough strength use a perimeter of 4 Please leave a like to be mounted with screws or doublesided tape (which does not work always - depending on surface of the table and weight of the plugs)
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for PETGSource material: PET
We needed a convenient way to store reusable shopping bags in the kitchen. I found a great model by Rixon Redd on Printables and modified it to be mounted with a 3M Command Indoor Picture Hanging Strips (Large) Pairs.
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
Do not hesitate to ask for different lengths if the ones already uploaded do not suit your project! I was looking for a rail to mount a led light strip on, so it would light up the wall, but not blind me. I could not find exactly what I…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET
Mount a reel of badminton strings to an Ikea Skadis board. Printing Instructions A complete set of this model requires: 1 print of the reel holder 2 prints of the lock clip No supports needed for printing. I used PETG for my prints but…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Soportes para sujetar una regleta de enchufes cuadrada La tengo en una estantería pequeña de ikea Los Gcodes están preparados para MK4 y para MINI+
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET
Mounting for an RGB LED strip profile to the ceiling or a wall. Dimensional specifications for the profile are provided in the attachment. Below, you will also find a link to my OnShape and I also attach a STEP file in case you wish to…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Banskobystrický kraj - je jedným z ôsmych krajov Slovenska. Poskladajte si celé Slovensko zo všetkých krajov. Vhodné ako učebná pomôcka. Jednotlivé modely (kraje) neobsahujú nápisy (môže to slúžiť ako slepá mapa). Poznámka: Na verzii s…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I've searched for quite a while and can't really seem to find any good, modern, 12mm humbucker bobbins for 7 string. So I took the time to learn Fusion and made some myself. Hope these work for everyone, it WAS my first experience…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Tool holder for post processing of 3D prints. Attached with a Tesa Powerstrip. printed on the head, 60% cubic Infill, no support The caliper has been given more space and is no longer as close to the other tools as shown in the picture…
Print approx. €6.31–€7.71 excl. taxPreliminary estimate for one variant
I recommend printing from PLA. Turn on the ironing function for a better look.
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
When creating a timelapse using Octolapse in OctoPrint you will probably end up with stringing ( see wiki ) at the side where you move your extruder while taking the snapshot. You can use this tower and place it in the near of the…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Present strips of sandpaper of different grits in a compact fashion. Can be used either horizontal or vertical. For use with https://www.printables.com/model/22236-customized-sanding-sticks-with-labels or…
Print approx. €6.34–€7.75 excl. taxPreliminary estimate for one variant
Just Austria Flag :D
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Print Settings: Material: PET-G Layer height: 0.25mm Infill: 20-30% (recommended) Supports: Not required Assembly & Mounting: Parts joined with: M3x24mm screws Wall mounting: Countersunk screws 3.5x20mm Features: Custom-designed for…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the new, compact measuring tool that will solve all your issues. This ingenious design allows you to successfully measure absolutely everything! (as long is it is the length of a piece of string!) Simply add a piece of string…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Made this to get some clearance from the cell ends and nickel tabs on cordless tool battery packs. Adds some expansion/contraction give also. Made it so it will take 8-10mm wide copper or nickel strip and no longer than 27mm's long. Will…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
2 in 1 big string and overhang test challenge for your 3d printer.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Tesa Powerstrip holder for shower basket
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
So my wide got this cheap LED strip to light up the stairs to the attic, but they game with double sided tape ( cheap of course). After reattaching the tape for the third time I had enough and spend a few lost moments on tinkercad to make…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
I wanted to make giant numbers using the lighting string cable. There were however no clips to fasten the light sockets to a board. These clips fit perfectly on the lamps, and secure the lamp on the board. Two clips are needed for each…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by Vision Zero Vancouver's campaign Grab a Brick! Now you can print your own personal brick to protect yourself while crossing streets! Pictures at 100% and 25% scaled. Print instructions: Printable in PLA; For best results use…
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
Just a quick design, for a BambuLab A1 Mini LED Light Bar Mod. Other mods mount the strip in the front or directly on the vertical rail, but I wanted to mount the LEDstrip on the back of the vertical rail with a slight forward angle. The…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Remix for smaller printers. I also modified something to have faster prints.
Print approx. €5.52–€6.75 excl. taxPreliminary estimate for one variant
They keep the people “safe”, but they’ve got ulterior motives. This Security District insignia is meant to be printed in white on black, with a single change of filament color. Note the use of the “Octogram Spiral” pattern for top infill…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Klagenfurt (Austria) - coat of arms 3d model multi-colour for single filament printers. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating pins are NOT printed.…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
Economical and fast to print string test for quick iteration over different parameters that might influence stringing on your printer. Printing Parameters Print this in the layer heigth you want to use or a medium setting, something like…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
Print at 0.3mm layer height. Print without supports. You should be able to see the strings in your slicer preview If using Bambu Studio make sure your wall generator is set to Arachne. See a video of the artwork here:…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
Cute skull drawstring beads for your clothes.No glue needed, just slide them up the drawstring. Easy to print! Only 2g filament per set! Three sizes available (diameter of the hole): 4mm 6mm 8mm 4mm and 6mm are properly the most common…
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
Author: Cipis https://www.prusaprinters.org/social/18/prints 3-color remix Remix for multi-material printers. Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 –…
LED Strip Holder designed for VORON 2.4 LED Strip Holder (200mm).stl It's 210mm long and for a 20cm long LED strip. LED Strip Holder (250mm).stl It's 260mm long and for a 25cm long LED strip. LED Strip Holder (300mm).stl It's 310mm long…
Everyone's favorite low poly skull beads! Properly test-printed and optimized for the best results. Hole size is 3, 5, 7, and 9mm. Print settings: Filament: PLA Nozzle: 0.25, 0.4mm Layer height: 0.10 - 0.20mm Support Type: Organic (Tree)…
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
This is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently. I wanted to create something that anyone can use, whether you’re a maker, hobbyist, or handling…
If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
You can use the PET Strip Spooler to easily store strips from PET bottles in compact form and nicely winded. Up to 7 spools will fit into the spool holder. The strip can be leaded from the holder to the machine for conversion to…
