5,198 models
Scarbo SVF1 Model has functioning doors, suspension, steering, shifting and moving engine pistons. Based on a modern replica of 1967 Ferrari 312 Formula One. No supports, except for the exhaust pipes. Everything is designed to be simply…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for one variant
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Christmas and Holiday themed tealight lantern lithophane ball. Lantern fits LED tea candle IKEA GODAFTON 4 versions: simple image with NO TEXT: "svicka_panorama.stl" simple image WITH PF2022 TEXT: "svicka_panorama_PF_opr.stl" detailed…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
This is a single extruder variant of my second articulating dragon design, the dual colour version is also pictured above. It includes a few improvements over My original dragon ( Rupee the Articulated Dragon ) including improved…
Print approx. €7.42–€9.07 excl. taxPreliminary estimate for one variant
tisk PLA, využil vynucené organické podpěry,
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
After a having a problem with my guiding due to dew, I decided I need a solution fast. I could save the night with an empty toilet paper roll 😅, but a more permanent solution was needed. This is a custom dew shield for the SV165 Mini…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Eine Verbindungsdose zum Verschrauben für 3 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Kabel Durchmesser ca. 9mm Das Gehäuse ist anschraubbar und der Deckel kann mit M3er Schrauben oder 3mm…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
Eine Verbindungsdose zum Verschrauben für 2 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Eine Seite für Kabel Durchmesser 9mm , die andere für Kabel 4x6mm.
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
Test bed level for Sovol SV01. Adjust in real time by acting on the wheels. G-code created with Prusaslicer 2.2 Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.20 Infill: 100% Filament: Eryone PLA rainbow Category:…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Lamborghini Aventador SVJ Wall Art silhouette. size can be changed. i accept suggestions of cars to make like this one.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
sněhulák se tiskne na více částí, vše se vejde na jeden výtisk. Ruce doporučuji tisknout s límcem
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for one variant
I only found models with a lower resolution than what I deemed acceptable and I wanted to train 3D modelling a little. Printed with .2 mm PLA. Bottom green, top white.
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
plastový držák - IKEA LOCK 16418 STROPNÍ SVÍTIDLO
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Designed this print to help me dial in each location in a 25 point manual mesh bed leveling grid (individual offsets can be edited). It is an improvement on my previous test pattern as it now searches for the correct Z height when…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is my first print share, so I'm new to 3D print. I wanted to print some useful holders for my pegboard from the Czech company Mars Svratka https://mars-svratka.cz/produkt/nastenny-panel-30 I was searching for the Internet, but almost…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This is a heating booster for Vogel & Noot Type 21 two-layer compact radiators in widths 132cm and 62cm at 80mm depth. The system works with standard 8cm PC fans (3 pin) which connect the printed segments together. In addition, the…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Neuer Fräsanschlag, neuer Anschluss Für meinen neuen Fräsanschlag habe ich einen neuen Anschluss konstruiert. Der Flansch hat eine Kantenlänge von 70mm. Der Anschlag wurde aus 12mm Material gefertigt.
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix for Aprilia RSV motorcycle fans Phone stand: v1-1 is suitable for devices with a total thickness up to 10mm v2-1 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for:…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Overview A top mount adapter to move the side spool holder on Ender-5/SV05 style printers to an easier to access location. This helps support direct drive Cartesian cube printers without excessive straight lengths or long reverse bowden…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
These are the hairpins that gym leader Iono wears in Pokemon Scarlet. Unfortunately these do not float, but they're cool to have around. Also, as a dude with short hair, I can't really use these. Also, this means I can't really test them…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
The original magnetic probe holder for Sovol SV07 and SV07+ printers does not allow the height of the probe to be changed. I've therefore designed a replacement part that allows this height to be adjusted, so that longer hotend assemblies…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
This filament holder extension, for the SV05, uses the original screws from the side-mounted holder. This moves the filament holder from the side to the top corner to reduce friction for the filament travel and produce better-quality…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
Take an SVG and create an optimized stencil for both spraying or pencils! Creation is fully automated. Customize To get a proper stencil, install OpenSCAD and on your own computer and follow these in depth instructions . Put the SVG in…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Der Reißverschluss ist ein unentbehrliches Zubehör für Bekleidung, Taschen und andere Gegenstände. Diese Zughilfe aus PLA bewegt den Öffnungs- und Schließmechanismus des Reißverschlusses. Ein qualitativ hochwertiger Zipper zeichnet sich…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Printed on Prusa Mini with following settings PLA 0,6 mm nozzle 0,25 mm layer hight 40% Gyroid infill supports everywhere.
Print approx. €1.75–€2.13 excl. taxPreliminary estimate for one variant
Printed on Prusa Mini with following settings PLA 0,6 mm nozzle 0,25 mm layer hight 40% Gyroid infill supports everywhere.
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Description osVAC Adapter for the Makita SP6000 plunge saw. However, it is rather a replacement for the original vacuum port of the saw to make the saw compatible with the osVAC standard. There are some adapters already available, but I…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
Simple holder for pegboard. Fits into the bigger “keyhole” like the hole of some pegboards. I was searching for the Internet, but almost all holders for pegboards are designed for the small holes and not for the “keyhole” like which I…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
Use SVG to create custom Crocs Charms! Some earper inspired charms included. Use OpenSCAD or the online customizer feature here . Just print the names with a filament color change, clip them onto your crocs (they stay without glue) and…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Request by an amatorial astronomic photographer “Andrea Anghileri” This is a dew shield for a guide telescope by Svbony model SV165 3omm f4 The project is composed by 4 pieces: dew shield with rapid joint lens cover with rapid joint part…
Print approx. €7.47–€9.13 excl. taxPreliminary estimate for one variant
Adapter für den "Bosch PSM 18Li" zum osVAC System. Innendurchmesser: 29,80mm also für 30mm Anschlüsse vom Gerät. (Passt mit etwas Kraft perfekt auf den Schleifer) Allgemeine Infos zum osVAC System: https://ossso.de/osvac/…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Requires an O-ring measuring 34.52 × 3.53 mm.
Print approx. €10.11–€12.35 excl. taxPreliminary estimate for one variant
On my first version I created a remix of this model but then quickly realised after making a few iterations of it that it would actually just be better to keep it simple and more like the stock one supplied by Sovol SV06 Plus . So I've…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
Just an osVAC M32 Parkside PWD 30 B1 Adapter :-) based on osVACneo Fusion360 files. Printet with suppport on bed only.
Print approx. €10.85–€13.26 excl. taxPreliminary estimate for PETGSource material: PET
There are two options—one with supports that are easy to cut out and one without. I did the supports because I thought it would be stronger if it was printed lying down. The holes for the BLT are small on purpose so that the screws can be…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Old but good. Ministry of silly walks from Monty Pythons Flying Circus (1970). Thanks to https://www.printables.com/cs/model/238523-monty-python-ministry-of-silly-walks-silhouettes-f/files now as earrings. Stare ale dobre. Ministerstvo…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
My daughter wanted to hang a mirror in her room above the door and angled. Perfect opportunity to sit down with Onshape and sculpt a bracket. The mirror is Ikea SVARTBJÖRK…
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant
My dog had dropped my handheld vacuum cleaner, breaking the clip on the bin. This one could not close anymore and it made the vacuum unusable. I modeled in 3D a simple part in order to make a quick, solid, efficient and much cheaper…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This model is based on the entry 6cgr from the protein data bank (PDB), presented in this publication: Dai, X., & Zhou, Z. H. (2018). Structure of the herpes simplex virus 1 capsid with associated tegument protein complexes. Science , 360…
Print approx. €6.79–€8.30 excl. taxPreliminary estimate for one variant
I remixed the osvac F32-H32 thing to adapt to my Starmix SG8 vaccum cleaner. Settings are for PETG from manufacturer Material for Print. The attached gcode is for a 0.6mm nozzle. The model will be printable with a 0.4mm nozzle too but…
Print approx. €4.13–€5.04 excl. taxPreliminary estimate for PETGSource material: PET
Držák zadního světla na koloběžku kostka.
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
hey hey hey it's professor turo's favorite drink! It's actually just a storage contianer based on moomoo milk. Everything assembles with either press fit or is held together with filament pieces. Printing You will need the colors Red,…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
If you want use the IKEA SVALLET lamp on your night table and you do not need so much light. This "cover" should help you.
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Druckt das Ding im Bereich des Blasrohres maximal mit 0,1mm Schichthöhe. - Da es da lediglich 5° Steigung hat. PET oder besser… Zur Not hilft etwas Alufolie gegen die Hitze. Pumpt bei heißer Nozzle immer etwas Luft (15..20%) durch die…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Clips on to the railing rather tightly. I've printed it both with and without supports (build plate only), on it's side. Turned out good enough, bit rougher without supports, as shown in the photo (before cleaning up rest of the…
Print approx. €9.10–€11.12 excl. taxPreliminary estimate for one variant
materiál PLA tryska 0,4 mm vrstvy 0,2 mm soubor Shift_stick_cap.stl a Shift_stick.stl jsem nahradil soubory s kruhovým otvorem, do otvoru je třeba vsunout kousek struny filamentu, čímž se výrazně zpevnila sestava páky , otvor možno…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I missed having the CR touch when I “upgraded” to the SV02 from the Ender 3 V2 NEO. So I purchased the kit and was surprised to find not only was a mount bracket not included for the device purchased directly from Sovol the STL file they…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
materiál PLA tryska 0,4 mm vrstvy 0,2 mm
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path when using an external fillament holder this is much smaller than the original filament spool holder and can be useful if you need to fit the printer…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
The Fysetc usb c input shaper devices work amazingly and are super cheap; just plug and play with no fussy wiring. I wanted a way to mount these solidly to the SV06 for measurements without using too much plastic. Came up with these…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Führung für obere Glasplatte des Sovol SV08 Enclousers. Mit diesen Keilen kann die obere Glasplatte des Enclousers, wie eine Schublade vor und zurück bewegt werden. Mich hat das Einkeilen der Türen immer ziemlich genervt. Guide for the…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Clona (kšilt) na svítilnu Fenix BC26R pomáha snížit oslnění účastníků provozu v protisměru. Doplnil jsem i logo firmy Fenix, které lze v projektu odstranit. Model je prototyp, který bude teprve testován v terénu. Doplňující clonu…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
🖨Catch All Trays🖨 The desk holder is a great idea to organize the desks and bedside tables of your office or home. The large back hole is for wallet use. Il porta oggetti per scrivania è un'ottima idea per organizzare le scrivanie e i…
Print approx. €4.31–€5.27 excl. taxPreliminary estimate for one variant
Eine Zeichenvorlage, um Waffen auf dem Papier zu erstellen.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
V kolečku je nutné vyříznout 3x závit M3 (popř. závitová vložka Helicoil M3 - nebylo nutné). Spojovací materiál: 3x šroub stavěcí s vtniřním šestihranem a s hrotem M3x8, ISO 4027 (DIN 914) Tisknul jsem na PRUSA XL: Filament: Prusament…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
Einhell Hoover Wall mount A wall mount for an Einhell Power X-Change 18V cordless hoover TE-SV 18 Li-Solo. The original wall mount was too big for me, so I designed a smaller one. Fittings 2 wood screws 4x40mm 2 wall plugs d=8mm…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for PETGSource material: PET
This adapter allows a hose with a specific diameter and pitch to be used with the osVAC system. The image shows the rotatable version designed for a hose with a 28 mm inner diameter, 34 mm outer diameter, and 4 mm pitch . Rotatable Design…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Desk clock with ePaper display with discreet lighting and automatic time synchronization over WIFI. You need to print at least the front part and the…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Ceiling light cable cap. Cable diameter 6mm, diameter 70mm height 96mm. Fixing bolt included. Krytka kabelů stropního světla, průměr otvoru pro vodič 6mm, celkové rozměry 70x96mm. Šroub pro zajištění je součástí modelu.
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for PETGSource material: PET
LAMBORGHINI Miura SV
Print approx. €6.25–€7.64 excl. taxPreliminary estimate for one variant
If you want to fix a Emisar D4SV2 Flashlight to a Gopro mount this is your adapter. I use it with a handlebar Gopro mount. The Flashlight clips in very tight. even bikepark is no problem. Link to the Flashlight:…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Geruchsverschluss, Sifon für Blanke Diba-Line 2.0 in DN40 (Fusion360 Datei mit dabei, einfach zum anpassen) Für Linienentwässerung, Duschrinne, Duschablauf. Mit PETG oder ASA drucken. Stützen nur auf dem Druckbett 4 Perimeter, 100% Infill…
Print approx. €6.72–€8.22 excl. taxPreliminary estimate for PETGSource material: PET
Update - various angles now available! Description This is an adapter to connect any Bosch device with the Bosch-specific Click and Clean vacuum socket to the osVAC system. I made it for the Bosch miter saw GCM 8 SJL, but it should also…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Shelf brackets for the IKEA Svalnas shelving system. These brackets hold a plank of wood measuring 75mm x 20mm (3" x ¾") on end at a slight angle and mount to the Svalnas rails using the stock mounting bolts. I use this to hold all of my…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for one variant
Pour les imprimantes SV01 Pro Upgrade avec le heatbreak fullmetal https://www.amazon.fr/gp/product/B0BJTWZ5C5/ref=ox_sc_act_title_1?smid=ASUA3ZY196WTJ&psc=1 Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Model plamínků pro výrobu dekorativních svíček z větví.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
[EN] This "lamp" consists of a base which is printed in the usual way and into which an electric tea light candle is inserted. The tree itself is then placed on this base, which is printed in vase fashion, ideally from transparent…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Tisk tentokrát na zkoušku vcelku za pomocí podpěr. Filament PETG, výplň 15%, tryska 0,4.
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for PETGSource material: PET
Žáci si na základě mapového podkladu ve Fusionu 360 vymodelujií jednotlívé státy ve formě puzzle, k tomu se vymodeluje nosič vlajek s názvy hlavních měst. Následuje tisk a sestavení.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
EN: "Fairy tales from moss and ferns" inspired me to create a kit of a house where two elves (Křemílek and Vochomůrka) lived. I created the base of cottage in two versions - first version contains a slot for two AAA batteries including a…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
[EN] Replacement bracket for the Silver Crest SSVS 1000 B2 sous vide cooker from Lidl. The holder on my cooker broke, so I made a new one. I used the spring and lever from the original holder, which were undamaged. Print Material ABS /…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
This is a versy specific model as it was made to fit an SV705C astro camera that doesn't come with a fan by default. The mount provides special clamping points to mount a special fan onto it while also providing a cable comb for cable…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
Waste bag holder for cleaning trolley / Svorka na odpadní pytle pro úklidové vozíky
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A modified and simplified version of Cathedral SV. Bartoloměje (Pilsen). Sliced for all Prusa filament printers.
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
I made the model using OpenJSCAD. The outer diameter is 25 mm, the inner diameter is 23 mm, the internal slot is 20.2 mm by 15 mm, and the overhangs are 0.5 mm from all sides. The cap covers the top of the hinge. It should be compatible…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Díly jsou k sobě slepeny vteřinovým lepidlem The parts are glued together with instant glue
Print approx. €10.11–€12.35 excl. taxPreliminary estimate for one variant
New version of XANIES light holder for MIBO Master foot bike and other models. Adjusted for better printout. Print instructions Tested ASA material that has greater strength but is quite flexible and CarbonFil ™ (not yet tested on the…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
I wanted a mounted trash bin for my SV01 Pro, so I figured going the Gridfinity route for mounting would make it useful for a much wider user-base. You can find the original OnShape document here if you want to copy and do any…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
Jedná se o svítící kryt na tažné zařízení, které je osvětleno pomocí dvou kusů lighstick mini. Model je rozdělen na části, které jsou spojeny lepidlem. Vhodné je vnitřek krytu podlepit samolepící moosgummi pro lepší držení. Model by…
Print approx. €6.65–€8.12 excl. taxPreliminary estimate for one variant
Chtěl jsem navrhnout co nejmenší světlo pro MK4. Vycházel jsem z tisknutelných souborů přímo od Průši. Použil jsem LED pásek 12W/m 4000K 24V s vlastním zdrojem a ovládám ho chytrou zásuvkou TP-Link Tapo. Není tedy potřeba žádný vypínač.…
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for PETGSource material: PET
A bracket to mount a Bluetooth camera trigger to the X-gantry of an SV05/Ender-5 like frame. Uses leftover printer t-nuts and hardware to mount to the gantry well past the standard range of motion of the printer. Install it, adjust to hit…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
10mm distanční kroužek pro bodová světla. Pomůže když je mezi sádrokartonem a parozábranou málo místa a konektor žárovky se dotýká folie.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Na úchyt je použit magnet 10x10x5MM a na dotažení šrouby m4 a matky čtyřhranné M4
Print approx. €15.40–€18.82 excl. taxPreliminary estimate for PETGSource material: PET
Příčný držák ke stanu Camper. https://www.printables.com/cs/model/819878-rc-110-scale-roof-tent-stresni-stan-camper
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Para os amantes do fusca
Print approx. €2.07–€2.52 excl. taxPreliminary estimate for one variant
Ersatz Handgriff für Mars Svratka Schubladen. Wenn der Griff abbricht und in Einzelteile zerbricht oder in Verlust gerät, dann braucht man nicht die ganze Lade nachzudrucken. Den Griff schiebt man in die zwei Nuten ein welche für die…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I have a Stellarvue SV80S with a red dot finder mount. This is fine to mount the rdf of course, but I wanted to mount my PiFinder (pifinder.io) on the refractor. For refractors the flat version of the PiFinder is recommended, but with a…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Přiložené 3D modely vytiskněte. Středovou tyč (modely C, D, E) slepte sekundovým lepidlem, přilepte z každé strany LED pásek a spájejte s napájecím konektorem. Středovou tyč s led páskem složte do spodní části tak aby napájecí konektor…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
This coaster is designed to catch any stray grounds that fall from your coffee grinder, keeping your countertop neat and easy to clean. It includes seven holes for attaching standard furniture bumpers (9mm - example ) or slip-resistant…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
Quick release cable, IDC Connectors holder Post connector for 26 Pin. Schnellverschlussverbindung, IDC-Steckerhalter, Pfostenstecker für 26 Pin Die awh 24g-e202-idc 24 Pin steckerleiste sind schwer zu bekommen darum bau ich sie aus 26 Pin…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Krytka na hromosvodový drát nebo roxor o průměru 10mm
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
Print Setting PETG 0.3mm draft
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Rámeček je ze dvou stejných kusů spojených na každé straně, třemi kolíčky, které jsou z vnitřní strany zajištěné roztavením (pistolovou páječkou). Pro větší pevnost, lze díly k sobě ještě přilepit. Tisknuto na profil 0.2 Quality, PETG.
Print approx. €6.17–€7.54 excl. taxPreliminary estimate for PETGSource material: PET
Kleine und große Schale am besten aus PLA drucken, da das gut aufeinander gleitet. Etwas Silikonspray (Blattglanz) hilft auch gewaltig. Um die Innenschale dann etwas Nachrüst- Fensterdichtung kleben und in die Außenschale quetschen.…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
![OSVAC Female F32 -> Karcher WD series with rubber seal [xHain]](https://media.printables.com/media/prints/b71a27c1-9267-4670-9146-e964da248f9a/images/10373390_bae051a6-9257-43f9-a3b1-42b074d21a22_c061616a-6335-4414-8c31-27bf909e02c6/vacuum_hose_kaercher_f32.png)
