1,023 models
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
Print approx. €9.32–€11.39 excl. taxPreliminary estimate for one variant
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Silueta de cada uno de los integrantes de este grupo musical y un soporte en forma de cruz que ayuda a colocarlos. NOTA: Se imprimen por separado para colocarlos como se quiera. No se requieren soportes. Cada cuadro tiene un tamaño de…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
With the release of the PP powder print sheet the XL now has a repertoire of 5 different sheets. For comfort, it's very convenient to have a dedicated storage for each type, especially during calibrations. This remix of the ArISSH can…
Print approx. €14.71–€17.98 excl. taxPreliminary estimate for PETGSource material: PET
The XL enclosure marked the arrival of the 4th steel sheet. It felt quite cumbersome to have the 3 slot version full with the remaining 3 and when having to run a calibration, toss the 4th one somewhere in the meantime. Now with this 4…
Print approx. €13.89–€16.97 excl. taxPreliminary estimate for PETGSource material: PET
parts for : Ultegra shimano 10000 - line safety guard Part Number : RD15149
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I used the parts from this kit https://www.printables.com/model/3267-led-light-bar-prusa-i3-mk2mk3 to mount the LED lights on the lid of my Original Encloure. Then I mounted the on/off switch inside the Prusa Basic Board Cover. Board…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
supplemented filament output
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Cable cover with integrated rail and magnets of course. Now you can mount whatever you want and you can change the vertical position in a blink of an eye. Instructions Print with supports ( Important! Take a look at .gcode ). I recommend…
Print approx. €6.89–€8.42 excl. taxPreliminary estimate for PETGSource material: PET
This part functions to 2 purposes. Store 1 SD card Store 1 USB based SD card reader The extra SD card holder allows you to slice/queue the next print job via another SD card I recommend using Prusament PETG Orange; it's the same filament…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
An all in one nose cone mounted AV bay to house an apogee deployment altimeter for high or mid power model rocketry. I have used a Bear Atimeters AltiUno I have paired it with 2s 200mah Lipo battery The sled features 2mm guide holes for…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
This collection of 3D models is designed as an example for teaching mathematics, helping to make the concept of integrals easier to understand. The models show the area under a curve, Riemann sums with different rectangle widths, and…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
The flower pot for a tall plant with self centering tray and integral pole. The hole for pole has 13.3 mm diameter for wooden pole ~13 mm diameter. Print settings (pot / tray): Layer height: 0.2 mm Perimeters: 5 Extrusion Multiplier: 1.03…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
I recycled an old closet door into a low profile cart. I used the 2 existing hinges holes (35mm) ans drilled 2 more. This spacer is made to make the interface between the 35mm holes and the 26mm wheel housing (Dörner + Helmer GmbH…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
Custom Chessboard with Extra Features This chessboard is a bit special with its optional built-in defunct Prusa Steel Sheet (MK3.x/MK4.x), allowing you to use magnetic pieces that stay put and don’t slide around during the game. Plus, you…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…
As soon as my Core One arrived, it was clear that the easiest way to perform many maintenance tasks is to remove the top panel, but removing and replacing the plastic pop rivets is cumbersome. The solution used for this model is to create…
Updates 2023/04: Improved tolerances on the housing and made the fit a little more forgiving, as some users reported difficulties getting the housing in place (v2.1). This version also includes improved cable clips. Drawer version v2 fits…
Here you got is the first Deltaprints desk organizer designed with an integrated smartphone holder, compatible with all common phone sizes. It features multiple compartments for pens, office supplies, keys, or any little clutter that…
Summary This is a model of a Honda Integra Type R DC2 (JDM) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate spoiler and big exhaust :) After printing, the model can be assembled with the…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
Added additional versions; now includes battery holders for AA, AAA, C and 18650 cells (all printed and tested but the 18650 up to now) There is a perfect design out there like this for 18650 - couldn't find this for AA batteries.…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
I can't find any high current 18650 holders on the market... So, this is it. Just need some M3x6+6(20A) or M4x6+6(30A) brass standoffs. ~~copper standoffs~~ Update: V2 Many small improvements. Print Settings Resolution: 0.2mm Infill: 20%…
Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…
Tired of managing messy filament tubes and bulky buffers? Here’s a sleek, all-in-one solution built for your MMU3 A compact filament management solution for multi-material printing. I needed a space-saving alternative to the stock Prusa…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the rack, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray opening, so…
This is a replacement for the air stripper and baffle assembly on the Umarex Gauntlet pellet rifle. Prints in one piece, muzzle-end-down with no supports needed. I saw a noticeable decrease in firing noise after replacing the factory…
A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
Tunnel for wooden trains (BRIO, Ikea LILLABO, Eichhorn etc) with an overpass crossing the mountain. This is really just a merge of the 2 source STLs, so all creative credit goes to those creators: https://www.thingiverse.com/thing:4971864…
Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…
Pls leave a like for the model - its a simple contribution for the work - THX Print with durable material (PETG, ASA etc.) if you want to use the GoPro connector, consider using 20%-25% infill for printing. 2 Versions available one will…
This is my first model and it worked out quite nicely. The candle will have 76mm diameter. You will need 4 bolts, atleast 100mm long. I am using 10mm bolds 100mm long. UPDATE: Apparently just strong rubber bands are enough. I printed it…
If you read this, please leave a ❤! Even if you don't have the enclosure, consider printing my other version instead :) It makes the plates much easier to access Slide your extra steel sheets into the rack. Sits nice and cozy under the…
Flashforge AD5X LED Lighting Mod – Cable Track Integration While optimizing LED placement on the Flashforge AD5X, I identified the side-mounted cable management channels as an ideal mounting solution. These tracks offer direct routing…
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
Raspberry Pi 4 Model B case with fan integrated. Needed M2,5 screws etc.. see photo for sizes. A Noctua NF-A4x10 5V fan You can connect the fan to the 5Volt circuit on the Raspberry Pi or .. as I did to the 3.3V circuit on the Raspberry…
Case for dji Integra with iflight "DJI Goggles 2 Sponge Foam Padding" https://de.aliexpress.com/item/1005005140640921.html https://iflight-rc.eu/products/dji-goggles-2-sponge-foam-padding I dont know if Goggles 2 fit as well, comment if…
Bring light into your prints! ✨ The Elegoo Centauri Carbon is a fantastic machine – but let’s be honest, it’s pretty dark inside . Inspired by the amazing original design from JesusFreak (huge thanks for the great model! 🙌), I created…
There are three versions, 60mm, 75mm and 90mm widths. The struts came from the Integrated Auto-Rewinder Spool Holder for Repbox. I've removed the logo and added magnets to the feet to keep them stationary. A big thank you goes to…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
💧🍴 About ⚠ The cover photo features version 1. 📸 The rack's design is based on a contoured base tray with a sloped interior. A fixed drainage spout is mounted at the lowest point of the tray, extending beyond the base's edge. When placed…
Pocket Screwdriver is a compact, portable screwdriver with built-in storage for three bits. It uses a standard drill bit extender (required) and is designed for everyday carry. Two versions are included: a single-color solid model and a…
Combined the hook into one design to allow for less scaling, and more places to attach studs
update 2026/10/05: a version for the BTT HDMI5 can be found here update 2023/07/09: moved the mounting tabs a bit outwards to make the “sturdy handles” fit between them (surely not on the 250 xD) added versions for the 250/350 (not…
These boxes are a perfect complement to NTX9's Organic Chess 2021 chess pieces. The trays that he designed are changed into boxes with lids that can be assembled into a full 8x8 chess board, so you can have everything that you need to…
OFFICIAL INDX SV08 OG & SV08 MAX INTEGRATION By appointment from Bondtech! Bondtech supplied an INDX unit for testing & systems implementation. Welcome! Im glad you found us here! So you want to add INDX to your Sovol printer. This is…
This beautiful curvy pot prints-in-place with the drain tray attached and ready for planting. The model includes a series of hidden channels beneath the plant that allow the water to drain out to the outer portion of the tray, where you…
My version of integrated circuit lcd cover for prusa mk3s+ Print instructions 0.2 - 20% infill prusament petg orange and galaxy black
Case with snap on lid for OpenDTU with 0.96 OLED Display. https://github.com/tbnobody/OpenDTU This case is based on Case for OpenDTU Breakout Board by bjoerns1983 Hardware i used for this: ESP32 NodeMCU with CP2102 NRF24L01+ with…
Case for DJI goggles 3/ integra with dji logo and m3x20 screws for the hinges
UPDATE 24.11.2023 Thanks to the feedback from “chochi3D” i was able to optimize the overall stability of this spoolholder. The following changes helped improving the stability: using 2 bearings for the one-sided mounting option (can also…
A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…
Printed with PETG 0.2mm layer height, 30% infill. In the folder knob by size : all knob from each size is on the plate and the print stop to insert the nut is preseted. In the folder Individual knob : Every file is sort by size for the…
This is a 3-piece cable reel that has a print-in-place handle. It was designed for some LED Christmas lights but will work with other cables as well. If you're cable doesn't fit the holes at the inner part of the reel to hold it in place,…
3D Printed Silicone Caulking Nozzle with Integrated Smoother This nozzle streamlines silicone application, combining dispensing and smoothing into one efficient tool. Designed to fit standard caulking guns. Key Features: 2-in-1…
I wanted to have a more narrow version to install 5 spools beside each other in the available space. Since the printer had enough printing space to produce two stands at once I decided to handle pairs with a double stand, causing the…
This is a remix of the Original Bondtech BMG Upgrade extruder to integrate the new MK3S filament sensor. Work only for Bear X axis. I did also some modifications to be friendly printable with FDM printer. I added a version of the extruder…
Just two simple wall mounts for the VELUX Integra remote series KLI. I added also the dummy-model of the remote itself (STEP-file) in case you want to create your own holder. I would love to see some makes! Thank You
This is my take on the idea of a bag clip with a screw lid. The main benefit is that you don't need to take it off to get something out of the bag. Why do you want my version? You don't need a third hand to put this on since the middle…
A quick design for a lens cover for the new Dji Integra Goggles as I could not find any. V2 is a bit wider which allows to have wide open lenses as v1 was a bit short Print in TPU. Category: R/C Vehicles
Remix of the fantastic design by matman_m: https://www.thingiverse.com/thing:3505890 -> created various versions from 2 to 6 brushes -> starting with the 3-brush-version, there are also dual-charge versions Available as .STL and .3MF…
This is an insert designed to hold everything you need to play The White Castle with the Matcha Expansion . It supports premium sleeves (up to 46.2mm x 71.2mm), and has a few design elements intended to make setup slightly easier. It…
Square Pot with Integrated Tray - all you need to do is plant your flower inside. 8 different sizes. Smallest 40x40 to 180x180. Rectangular versions (80x100, 100x140, etc.. ) available here:…
This model is compatible with the lego system.
I started with the double stand by Robert Schiele, and after cutting down and testing I decided to build a stronger stand. Not as elegant as the original as it requires supports and is a slicer special, but is entirely functional. I…
Print it exactly the same as you would the original. Crosshair flat on the bed and no supports. PLA is fine.
A quick remix of the stock MMU2 Selector Plate and the tapered thread PTFE coupler from https://www.thingiverse.com/thing:1993384 I mashed these parts together as I was getting a bit tired of the stock festo coupling cutting into my PTFE…
Strong mount system for a Shark Cordless Stick Vacuum (IZ202UK), although should fit other Shark cordless vacuums too with similar handles. There are 3 integrated cable clips to manage the charging cable and position it at the top where…
Don't want to print? Buy from me directly! >>> Craftedcarving.com Tune your snowboard/skis at home with these clamps! 2" or 3" Clearance for all tables/workbenches Mostly 3D printed: PETG/ABS, TPU Non-Printed Items: ¼-20 Threaded Rod…
All the parts are sized to print on a 200mm-class printer like an Ender 3. All parts should print without support except the top level of the tower, as it requires an insane amount of tree supports. I've included my gcode file for that…
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly Axle clip is…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
This versatile 3D-printable wall vase is designed for both wall mounting and standalone use. Whether you choose to hang it on your wall or place it on a flat surface, this vase adds a touch of elegance to any room. Features:…
Corne Highpro Case With Integrated Plate Files included for both 5 and 6 column versions Required Hardware 18 x M2 heatset inserts (holes are 3.6mm diameter so most M2 inserts should work) I used…
Redesigned X-carriage for the Voron Legacy to use BLTouch probe instead of inductive probe. Also changed to use CW2 style extruder mounting. Both Stealthburner and Afterburner use the same mounting so either works. Adjusted cutouts in the…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…
The problem I had is that the supports didn't allow for a surface finish that I liked. This Model has integral supports, that need to be popped off when the print is done. Before assembly. I optimized the design for printing in a specific…
This a remix of VincentGroenhuis's Integrated Auto Rewinder, sized to fit jterranella's RepRewind stand so five of them can fit inside the RepBox 2. The scad is the work of VincentGroenhuis, I merely changed the dimensions to fit the…
Bondtech INDX system, files origin from https://github.com/BondtechAB/INDX I have painted this toolhead step file and separated each component to STL, so you don't have to I also share you a Blender file for rendering
I liked very much the model by @3Dservis for a pirate doll my wife is doing. The hinges did not convince me so that is why I modelled integrated ones.
OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…
This is a spin on Annex Engineering's Sherpa Mini extruder, just with integrated collet holder. Uses 4mm UM2 collet : UM2 Collet - Aliexpress **Note : The Step file if directly sliced may throw non-manifold edges warnings, just repair…
Layer Height - 0.1mm Infill - 20% Recommended Material - ASA or PETG
🆕 Update Available: A newer version of this Silica Gel Container with Integrated Hygrometer https://www.printables.com/model/1508555-silica-gel-spool-core-drying-container-4-lids-hygr Keep your materials perfectly dry and always informed.…
I made space for 4010 cooling fan. Also little bit improvement I murged to piceces in one model. The previous model improved this time because the cooling part touched the hot end. The fact that the 5015 blower does not engage exactly…
Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print This is a frame and stand for the wandering clock model:…
Wanted to design a fidget spinner that was low friction and completely print-in-place. The spinner is build around one of my 608 bearing designs (7 roller asymmetric cage), see https://www.thingiverse.com/thing:4876635 Clearance in the…
Hanger for dry suits with integrated boots. Hangs suit upside-down (by the boots). Useful for hosing down after a dive, or for those times when the “dry” suit didn't quite live up to its name. You can get similar ones for about a tenner…
This is my first version of the Criss Victor (Kriss Vector). The main difference between this and the real one is: The placement of the mag, the placement of shooting mechanism and the stock Print Settings Printer Brand: Creality Printer:…
