Counting matching models…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Desiged this tower in freecad after the model of already existing examples
No supports I wanted to add a few more things to test on a temp tower and also use minimal filament. I came up with this fever dream abomination. Enjoy! Instagram https://www.instagram.com/spitzspot/ Print instructions Category: 3D…
Update: v1.9.6 10-10-25: Test cutouts on the backside are back! Somewhere around v1.8 I left a “*” character in the code while debugging that made them disappear. My “Improved All-In-One Temperature and Bridging Tower” is very popular but…
Upload of my project from thingiverse since thingiverse has become trash! Unfortunately I can't upload .exe files here so you'll need to download it from the thingiverse page or directly through this line Introduction Project Goals I…
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
This is a Temperature project for PETG with temperatures starting at 220 to 265. Just open the project, insert the filament, and print. The temperatures will change automatically.
Modified model and g-code to work with PLA Silk 195c to 235c
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
Temperature tower for ABS/ASA filaments going from 230 - 270 degrees celsius. The machine code is added to the printer profile with a suffix of TempChange. If you'd like to modify the text, you can add a new text shape with a font of…
¡Saludos, comunidad de amantes de la impresión 3D en prntables! Me complace compartir con ustedes mi último proyecto: una torre de temperatura diseñada para probar diferentes materiales de impresión 3D. Si alguna vez te has preguntado…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
This is a Temperature project for PLA with temperatures starting at 235 to 195. Just open the project, insert the filament, and print. The temperatures will change automatically.
Temperature test for PLA, TPU, ABS and PETG
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Update: Added a Version 2 in order to strengthen the fine detail extended tower as it might fail depending on the filament type This is a Remix of the Ultimaker tower which i modified slightly to also include bridging, stringing and also…
En este post encontraras varias torres de temperatura que me a tocado utilizar a lo largo de casi dos años
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
En este post encontraras dos torres para petg una de 245 a 220 y otra de 250-230
This is a completely parametric temperature tower remake from Tronnic's work (rather than a remix). I liked its basic design, but I missed the ability to tweak on parameters, and hence it is! You can: Set the temperature range and the…
Temperature tower calibration Print instructions 0.20mm layer How-to customize the temperature range:…
**Update** I recommend using the built-in calibration tests in OrcaSlicer these days instead of this model. Of course if you want to use this one, feel free :) I really liked the number of features present in Tronnic's model but wanted…
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Test your filaments to find the best printing temperature. 3mf files for any other printer, just import as project, slice and you should be ready to go!!^^ Ready-to-print G-CODE for Creality CR-10 Smart Pro printers included. Remixed from…
Note: The feature to generate your own temp towers has been built into the SoftFever fork of Bambu Slicer. Update 28/1: Updated slicer version and added PLA Plus Temperature Towers for PLA / PLA Plus / PETG / ABS / ASA on the Bambu Labs…
This temperature probe organizer is designed for the Rubicson wireless BBQ thermometer with 4 mm probes that can be found at kjell.com in Sweden. There is also a step-file attached for easy modification. The parts are intended to be glued…
You can use only the blocks you need, arranging them before to send them to your slicer, just to print everyone at the right temperature , you need to include in personalized G code section, inside before layer change section, this code…
Added letters A to I to this nice temp tower. That way you can use whatever range you prefer. I also added a small break-off tab so you can get a feeling of layer adhesion. Not sure how well that will work, though. Print instructions…
Open the corresponding 3mf file with "Open project...", select your filament and nozzle, use 0.2mm layer height, slice it and switch to the temperature tab. Check that there are multiple temperatures. --> Print and have a look at the…
Customized version of https://www.thingiverse.com/thing:3438677 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3438677 Instructions Using the following options: Base_Temperature = 200 Number_of_Steps =…
[2018-03-28] User i_has_it found out that the only thing to make it work with S3D is to adapt the layer change script like that: ;LAYER:[current_layer] [2018-01-25] Thanks to user groenewaldd's hints in the comments i have adapted the…
Con este modelo de torre de temperatura podrás realizar los cambios de temperatura de una manera fácil e intuitiva, ya que está diseñada para realizarlos cada 50 capas de impresión. Utilizando el comando M104 S…. ¡Y la temperatura a la…
About the Part This is a remix of the very popular Smart Compact Temperature tower. We would like to thank gaaZolee for the inspiration for this model. This is also a modified version of the Popular OrcaSlicer temperature tower . Side…
Simple Mod to mount a temperature sensor to the gantry
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
UPDATES! Feb 4, 2025 Changed “before layer change” macros to accommodate nonstandard layer heights (now checks “is between 1.45 to 1.75” instead of “is exactly 1.6”). Still can't guarantee successful temp changes on layer heights above…
Just download the G code and print!
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
This model and associated optional configurations are the result of months of trial and error work to improve the chamber heater behaviour of the Qidi Plus 4. The stock chamber thermal probe is located under the frame rail to the…
Fast Bridge and Retract test part If you like it --> press like it :-) Have searched for a model with which i can fast check good settings for temperature, the fan or retract. Found a lot of Temp towers but they took nearly 3 hours for…
I bought a new spool of FilaCube PLA 2 , but it jammed the extruder as soon as the second print layer started. FilaCube recommended raising the temperature, determined by printing a temperature tower. Most temperature towers use way too…
Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests
This is my model of the SSV Tempest from the Mass Effect Andromeda. The model is some 60cm long and is a kit. The pieces are divided per their color. It is unfortunately not in scale with my other Mass Effect ships as it would have to be…
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Mount for a temperature or humidity sensor on top of the Prusa MK3S printer. Sensor:…
Compact tuning tower with essential minimum features. Bridge: 25.0mm Overhang: 25° and 35° Hole DIA: 3.0mm Height of each tier: 8.0mm (including 1st tier) [ Available in 1 - 12 Tiers ] Using a tower with the required minimum number of…
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
I have many Aqara Zigbee thermometers around my house and it's a pain to change the batteries once a year. Two AAA batteries should have much more capacity than CR2032 cell. This case houses the sensor and two AAA batteries inside. It…
I printed this with no supports on my Prusa Mk3s+ using some cheap black PETG. Screw holes are sized for #8 flat head screws. I'd love to hear your feedback and see pictures. Thanks!
I needed a bit more range than some other temperature towers, so I made a configurable Temperature tower based on: https://www.printables.com/model/38895-temp-tower-prusaslicer-02mm-layer-petg https://www.thingiverse.com/thing:2493504…
With this design I have combined my tiny benchmark (link below) with a little temperature tower, which is just big enough to give me all the test results that I need to chose the printing temperature for a particular material. Features…
To adjust the temp tower you can use the py-script. https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment Or use the example gcode for PETG or PLA with 0.4 nozzle at 0.2mm layer height. If you use Prusaslicer, you can insert the…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 36mm x 29mm 6mm Keyring hole
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
A basic case for for an STC-1000 (or ITC-1000) temperature controller. Prints without supports, and needs no fasteners. After printing, run the sensor wire out through the back hole of the case and run your power and device wires in…
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
Sensor holder for Xiaomi Aqara Temperature sensor. You can get it easy out for battery change.You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case…
Model, script, and description by kickahaota Script version here includes modification by Iatrodectus needed to make it work with recent Cura versions. ---- (See "Change History" near the bottom of the page for information on recent…
Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.
I decide to design an indepedant holder for rectangular sensor, to allow use on different position : works on desk works inside an enclosure works on to of an enclosure I defined wich angle allow this several usage I propose 2 design :…
G-code is available with related modifications. A 0.4mm noozle printed on an Ender 3 is used.
I hate to glue these sensors to the wall using attached double sided tapes. I'm using this minimalist mount to fix them.
I wasn’t happy with the battery life of the Xiaomi LYWSD03MC temperature sensor with Zigbee firmware, so I decided to make a AA battery “backpack” that replaces the standard CR2032 coin cell. Remove the back cover of the temperature…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
Wanted a temperature tower with some shapes built in so designed this one in Fusion 360. Has some simple shapes such as ellipse, circle, triangle, and squares along with a cone and pipe shape. The base is 2mm, so keep that in mind for…
Introduction: This is an ESP32 D1 mini case for temperature and an optional mmWave Radar presence sensor. Optimised for space efficiency and the placement of the temperature sensor has been optimised to minimise self heating from the…
This tempate guide will help you to put a protective screen for iPhone 12 13 14 Pro Max. For the 12 start at the top with the speaker hole. For 13 and 14 start at the bottom to perfectly fit the bottom edge. => REMOVE the template when…
I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor. Buy here Size is compatible with the original design…
This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.
Configuracion de bgcode con cambios de temperatura para prusa mini ya que estuve buscando para mi y no encontre
Needed a case for my temperature control switch (12V) W1209. W1209 are available in 5, 12, 24V (maybe more). In my case I used one common 12VDC source and connected the relay contacts to switch my (noisy) cooling fan on and off. Pretty…
I have bougtht several round Temperature and Humidity Meters to put them inside the filament spool holders. I have used one in my 3D printer chamber for temperature and humidity indication. These meeters are tiny and round. I could have…
Hello Everyone This is my second project for the Xiaomi temperature and humidity sensor. The first design is to change the color of the sensor housing for use in the Bambu Lab AMS System or the second version to change the color of the…
Needed a fast and easy to print mount for the Aqara temperature sensor. You can mount it with screws or dubble sided tape. Print Settings Printer: Flsun QQ Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10%…
A simple holder for Tuya tempeature / humidity sensors. It is designed to be hanged with one screw (see pictures). The sensor fits easily in the holder and is hold by gravity. Print in PLA or PETG.
Summary A case for a temperature and humidity sensor powered by an Arduino uno board. The case fits: an Arduino uno a small breadboard a 16x2 LCD display a DHT11 temperature and humidity sensor The parts are locked in place by melting the…
After the Garmin Tempe is inserted, attach the holder to the backpack or jacket with paracord through the eyelet. Through the paracord the sensor no longer falls out. Version 2: Accurate fit More air slots for better measurement values…
A simple model of Rimuru Tempest in slime form. Made in Tinker Cad. Print with 0.2 layer height using my Ender 5 +. Printed with a light blue PLA from overture, but you can use whatever if you paint it. I also printed this mask sized for…
tempest · container containers with minimal screw-lid design for optimal function and refined form, available in three different sizes for versatility and practicality, or as an elegant set dimensions in mm 125 mm height ~ x • 92 · y • 92…
Use with 4x M3x20 screws (DIN 912) 4x M3 (DIN 562) square nuts Mount on wall with double sided tape
Customized version of https://www.thingiverse.com/thing:3438677 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3438677 Instructions Using the following options: Base_Temperature = 200 Number_of_Steps = 7…
This is a magnetic holder for temperature sensors. You'll need a 8x4 or 8x3 mm magnet. There are three versions of the holder. The smallest one should work with sensors of ~4 mm in diameter, the middle one fits sensors of around 4.9 - 5…
Holder for temperature sensor from Aqara. The sensor just slide in the holder and can be placed on shelf or furniture. Print settings: PLA Layer height: 0.10mm
Fixing the gap between the two components; now they fit tight together; Taking out the screw hole and replaced with a pin; New Air vents pattern This remix is used in my project here: https://www.thingiverse.com/thing:4352377 Enjoy!…
I remixed the Flo4Print's model to fit non max iPhones. I added a version without the two protruding edges.
I really liked the concept of a relative temperature tower that supports any material, but I also wanted to be able to change the layer height/nozzle size easily, so I rewrote the layer change G-code to be layer-independent.…
