Counting matching models…
This is a digital 3D printable model of Mockingjay Pin from Hunger Games . The download contains 3D models ready to be 3D printed on a 200 mm print bed in STL and OBJ formats. It’s placed on the print bed as we would print it to save you…
Scroungers call in reinforcements to take down careless hunters. Two poses are available, one stalking its prey and the other sending out an alert. These machines are to scale with the official board game and stand on 40mm bases. It is…
Hi! This is a 'experiment' with Print-In-Place models. a Lounger. Printing tips: Separations are 0.3-0.5 mms. That should work with most of printers. Included 123D file for easy remixing of this model Have fun! Category: Model Furniture
A set of fully printable plunger tubes! These plunger tubes are a fully printed design that fits in standard TCs, Caliburns, Lynxes, etc, without modification to the blaster ! So far, there are plunger tubes in these sizes: 1.5" OD…
Simple 3D printable tube to replace a cracked plunger tube on an X-Shot Longshot. I recommend printing this with Orca slicer and scarf seams enabled to get the best inside surface finish. Attached .stl file and a .3mf file for use in Orca…
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
A bookmark I made for the hunger games books.
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
In Case Of Hunger Lockable Storage Box Customize Me in Fusion 360! Video: Link HowToPrint : - Layer Height: 0,2mm or smaller. - Support: only for Lever - Infill: 20-25 % Font: Bernard MT Condensed
Add more top/bottom layers to cover the infill better. Also suggested to print it in bigger scale (print is detailed and i admit, not the best). As l am fairly new to this, ill be glad if there are any tips you guys can share about…
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
Here is 22. cal pellet I designed for my Pellet gun, Warning! very loud and fast moving, Print on Face
A plunger for Dummy 13, to unclog the shit he causes
Plunger for the RS Pro epoxy gun, to work with 3M scotch-weld 2-part glues like DP8005. I printed this standing up in Sunlu White PLA+ with a 10mm brim and supports for additional stability. I've included the bgcode for a Mk4.
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
Plunger for the RS Pro epoxy gun, to work with 3M epoxies like DP2216. Can be printed standing up without supports!
A Christmas Ornament for those in your life who are obsessed with the Hunger Games!
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Bunger, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
I designed this dice holder to highlight how many hunger dice are currently in play for a particular player after several people at my table kept forgetting to add their hunger dice into their dice pool. Since it's such a core mechanic, I…
This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports
This package contains an applicator tip and plunger for the cheap Chinese made Amtech 10cc syringes, which are sold in bulk and come with neither. I'd been hot gluing plunger base from an old Global 10ml syringe with the rubber end…
Update May 10 2022: So it's been a year or so now since I made these. And I have to say, clearly no one printed it. I was reprinting in .10 layer height as well as printing thread into the pull instead of tapping it, just to refresh the…
Use the high power plunger for normal length K25 springs. The low power plunger should be used for the 788 spring, or 20 coils of K25 for a big power boost.
This is a key for tightening the beiter plunger on your riser. Sometimes the space between the nut and the spring case isn't enough to fit the original key, so I decided to make my own! Cool adition to the original key it has a hole so…
Created a simple tool to help realign the piston on a Flair 58 manual lever espresso machine. I tested it on my Flair58 while fully heated and the tool seems to hold up fine printed with PETG, but use at your own discretion. Also works…
Este Plunger de 12 cm / 5 pulgadas, fue diseñado para ser utilizado en caso de emergencia o imposibilidad de salir a comprar uno a la ferretería. este dispositivo sirve para desobstruir inodoros o tuberías. Se puede usar con la mano o se…
This is a tray for a 6" flange style toilet plunger with 3" to 4" flange. The main part of the plunger sits on the fins with the flange held slightly off the bottom. I printed mine in PETG with a 0.6m nozzle at 0.3mm layer height with 10%…
A painting handle with a rotating platform that spins on bearings and is restricted by a ball plunger. The rotating platform is assembled with two bearings and a long M4 screw. I used an M6 ball plunger although it can be used without…
Nice wall design of simons hungry cat
Haymitch Hunger Games Token - Sunrise on the Reaping
Update May 3rd: Improved Freewheel and Pawls leading to better plunger action & longer coasting. Update May 2nd: Added new STL for Detonator box without text (Not pictured) Amp up your tabletop gameplay with this themed interactive dice…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The stock plunger did not press evenly on the cartridge plunger leading to enormous leakage at the back of the cartridge. I almost exclusively use the polymere cartridges from Würth (German professional hardware store) I used a metal…
A toilet plunger holder!! The g-code for the plunger holder base and lid both have Octogram Spiral selected for top and bottom layers which leaves a nice little design on those layers as an option to just smooth. Also, the base holder has…
Print & acrylic draw!
This is a fully functional 5ml syringe with tpu plunger. shells printed in vase mode for speed and plunger only 7 mins. 0 leaks and 100% holds liquids without droplets, pretty amazing… enjoy
Hunger Games Silhouette art Very easy to print, no supports needed, the back slots into place securely. Print more than one back so that you can change the mood by changing the background.
Simons Cat Hunger Cookie Cutter
Referenced SillyButts Plunger tube design to create a variant for the Ontos. 150mm long and OD of 35mm ID (with the plastic insert) is 32mm. Works great! I have tested it and barely noticed a drop in FPS compared to the aluminum tube. I…
A bookmark in form of the mockingjay from Suzanne Collins' Hunger Games series. You can attach it to the page using the clip I added at the top. Printing should be pretty straightforward. If you printer can't handler the edges directly on…
A plumbing plunger in three sizes with a compact screw-in handle. Useful for cleaning blockages and clogs in all sorts of sinks and drains. Approximate base diameter: S - 100mm M - 125mm L - 150mm Every part is optimized to be easily…
Fits 30mm Sanwa buttons without any modification to the button
The DZP MK2 foam dart blaster has a design problem the screw posts that connect the plunger tube to the slide grip are not supported by any webbing, over time they can crack or show signs of plastic stress. This part is meant to provide…
Parts to make a pinball plunger for a virtual Pinball. Video of it: It makes a satisfying clank when assembled and installed. Requires the purchase of 2-3 springs, a switch, and a 1/2inch rod. In my build I used Qty 2 of 3" length springs…
Blue and black keyboard plungers for the Commodore 128. Blue is used for the function keys, black is used for the main keyboard. These are really only suitable for resin printing. Might work or be able to be adapted for other Mitsumi…
Print & acrylic draw!
A plunger to get the flux or solder paste out of the syringe. Handy if your other one broke, or if you can't find it anymore :). Print Settings Infill: 25-100% (Depending on the nozzle and viscosity of the flux or solder paste) Brim: only…
Follow the print instructions and orientation for Ontos. Except for the back, center, ram and plunger head, everything else is the same as Ontos. Two obvious hardware changes: Plunger tube is 15cm 35 ID 38OD tube Use 30-35 orings or 123…
Hunger dice for vampire the masquerade 5th edition, including clan dice designs which replace the critical success face with the clan symbol. I have not yet attempted to print these files yet and as such I cannot vouch for the quality of…
The Hunger Games Characters - Katniss Everdeen 3D printable model.
Frylock: Aqua Teen Hunger Force
Tube with plunger for Star/Heart-shaped Play-Doh Tube where you can insert the children's play-doh and using the plunger, push it and create a large Heart-shaped spaghetti ------- Tubetto con stantuffo per pongo a forma di Stella/Cuore…
2 piece model for easy printing. pieces fit snug, some de burring may be required. Designed for a 8mm x 2mm magnet. .2 layer height, no supports, infill 20% Assembled it measures about: 24mm wide at the base. 48.5mm tall with magnet…
This alternate catch and plunger rod system allows you to not need the metal plunger core that is standard with the zinc. I did this so I could more easily source my own zinc hardware as that plunger core is some non standard piece of…
Test video: https://youtu.be/dxtW75af_pY WARNING, RESULTS ARE WILDLY VARYING BETWEEN TESTERS. THERE IS NO GUARENTEE OF AN IMPROVEMENT FOR YOUR SPECIFIC BLASTER. Caliburn and TC plungers that have a sloped o-ring channel, similar to a CEDA…
Sink Mini Plunger, a handle to print w/ rigid material (PLA, etc) and two different cups (square, round) to print w/ TPU. I've printed both styles of cup, used several times, works well. Biggest variable is the size/shape of the sink…
These are the plungers and spring holders used for cheap Gel Blaster gear boxes on amazon and other sites. I remodelled them with exact dimensions and tested them to ensure they work. These do not come with the rubber bits. Use a…
A jig for gluing magnets to #gridfinity weighted baseplates. This is roughly the opposite of the Magnet Glue-Up Jig that assists in attaching magnets to Gridfinity storage blocks. Uses the standard 6x2mm magnets. Remix of kmeisthax's…
This model is compatible with the lego system.
With this model you can use the last dose (5th) of kwikpen of most brands. It's intended to use without break the pen in half, because this is difficult to do, only you need to remove the dial and insert the plunger. Due abuse in the past…
1 in mini cake pop cutter and popper Matching tray to hold cake pop disks for keeping shape while inserting cake pop sticks.
Multi-devices beiter key : This tool was designed as a replacement for the key supplied with the beiter plunger. With it, you can tighten the beiter's plunger shoe, but also the nut, and, that's new, the beiter clicker. Easy to print No…
Made a 3 color model to replace the cardboard tokens in Mr. Torgue's Arena of Badassery. They can be used with the corresponding numbers underneath for the various scenarios utilizing them.
Give your phone some time to rest and recharge. Story Ever since I saw ThePhonePillow by HpInvent, I wanted to remix it into a wireless charging pillow. Alas, HpInvent's is using a very restrictive closed license, so I would not have been…
This is a slider style whistle which uses a pill-shaped plunger/slider to change the tune as you blow into it. Here's a vid to see what it sounds like (with the older style plunger slider): Here's the one I originally designed for an ABS…
redesign of plunger and plunger rod in a style more akin to Sillybutts designs (rectangular instead of round); therefore much stronger and easier to print. Modified catch assembly to accept rectangular plunger rod. Plunger tube changed to…
This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist , the Wildstyle , the Foxbat and the Battle Axe . It uses the same hardware as the plunger head of the above mentioned designs…
Edit 3/26/2021 Added a v2 plunger. Made it a little bit taller to it doesn't rattle as much and modified the geometry of the stem. Left both versions so you can print out both and decide for yourself which one fits your needs. If printing…
Silicon gun Plunger replacement, with 8mm diameter that can be change with fusion configuration table.
Needed a fitting to attach my gutter cleaning brush to my Unger pole. Print as oriented in the file. No supports needed. I used 6 walls and 50% infill. Printed with ASA for strength. I'm sure PETG would work too.
Hey guys, I'm trying to eliminate as many non-printable parts from my designs as possible. On my journey to conquer this noble quest I tried a few approaches to get rid of the PVC tube, only to find out that Sillybutts had already solved…
This is a plunger intended for solder paste tubes like the one shown below that are normally sold without it. The plunger is printed in one part and you break the support structure of the moving part once it is printed using a small…
This is a set of replacement plungers for Baolian 30mm arcade buttons sold at Microcenter. The labels are embossed so they can be filled in with model paint. Acrylic also works well and is easier to clean mistakes, but is less durable. I…
Eignet sich hervorragend als erster Druck und für eine Mustersammlung! Man kann das Modell individuell anpassen, ich habe schon einige Vorlagen für Filamente, die ich besitze erstellt. (Prusament/ERYONE/Redline Filament/Filament…
This is a plunger for the 3M DMA 50 dispenser. This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge. With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges. I printed in PETG, 0.4mm nozzle,…
Iconic Movie Props - The Hunger Games - Mockingjay Pin - 2012
Print in PETG or PLA (better in petg) Infill 45% Layer 0.2mm
With this pin, you can become a Capitol Academy student! There are 2 models. One has a plain flat back. The other one has holes so that you can insert a safety pin in and glue it in so you can pin it to something. I would love any…
Fits 24mm Sanwa buttons without any modification to the button
Tired of the same old stash containers? Take the plunge and give this mini plunger a whirl! I know, I know... it's a little goofy and it won't actually unclog anything. But I had fun making it and I hope you have fun with it too. This…
Dont put your plunger on the floor thats gross, use this tray its less gross. Just resize for your plunger if needed. This fits a plunger 152mm so resize as needed I will include the Gcode, Stl, Blender files. You should be able to resize…
Hello everyone! This is a Nerf Rayven that I converted from a flywheeler into a plunger tube and spring powered blaster. Back in 2011 when I saw a very grainy leaked picture of the Rayven on NerfModsandReviews, I got so excited by the…
Hunger Games ‘in a box’ ornament This is one of my ‘in a box’ series. Perfect as a gift for enthusiasts or a Christmas stocking filler. The pieces inside the box can be clicked together to create an ornament. No supports needed. Is there…
I have scaled this plunger down to 10cm (most Australian toilets bowls are smaller than U.S ones) and added a handle with a cap to either hang it up or just hide the screw hole. If you want a really long handle you can print 2 handles and…
The Hunger Games Characters - Primrose "Prim" Everdeen 3D printable model.
These syringes full of UV glues have no manual way to dispense the material inside. Instead they want you to buy a gun that costs more than the glue ($15 to $40). That's fine if you are using it to often like to make a living. So I…
Broke the little plastic holder pins for our window screens, so needed some replacements and the options on the internet didn't look quite right. These are the plastic pins that you push in to keep your window screen in place. The model…
Dog chewed your Jolts handle?Just looking for a new upgrade perhaps? Not a problem! This is a redesigned plunger assembely for the nerf Jolt, serving as a stock replacement aiming to meet and exceed original performance while making…
This is a mini plunger. You can just have it sit at your desk or you could glue it to your ceiling. I don't know why you would do that though. Thank you for reading!
The Hunger Games Characters - Coriolanus Snow 3D printable model.
This Print-In-Place plunger is designed for conventional flux and solder paste syringes, and it has a plug to seal off the syring and avoid having the plunger fall out of the syringe when put down on the table. I designed the plunger to…
This file is for the Xshot Hawkeye blaster. The file is to fill in the deadspace of the Xshot Hawkeye plunger.
Dieser Aufsatz passt perfekt auf den Topf vom Reishunger Reiskocher drauf. Mit dem Aufsatz kann man den Reis im Topf waschen und dann einfach Abgießen. Wenn euer Drucker maßhaltig druckt dann sollte das Teil absolut genau passen und auch…
Updated plunger head with a replaceable TPU face. This is probably only necessary for pre-compressed spring loads The low power plunger can accept up to 20 coils of K25 spring The long plunger can accept an entire K25 spring and is…
Druckeinstellungen PLA Füllung 10% Schichthöhe 0,3mm mit Stützen, ohne Rand (die Augen habe ich von Hand angemalt, da die bestellte MMU3 noch nicht eingetroffen ist)
A collection of 3d printed length gauges for common hobby plunger tubes, to help with cutting them to size or figuring out which ones you have on hand. Each gauge has two sizes on it. SLAB/Skewer, Talon Claw/Caliburn, and Lynx/Minx. The…
I made this a few months back but just now uploading it. IIRC I had scaled the plunger to 98%, but please let me know if this doesn't work! Note: Only use food-safe printing material or do what I do and cover the parts in plastic wrap…
Improved Caliburn plunger. Smaller diameter spring hole. Now 24mm instead of ≈ 28mm. This adds rigidity to where the spring sits when primed. NOT compatible with k14. Just get a machined plunger. No hexagon pattern. I know we all love…
![Gridfinity Magnet Baseplate Jig (with plunger) [Remix]](https://media.printables.com/media/prints/656253/images/5172236_beac793c-60d1-46b2-a0c7-0e44f2f88b1c_e619d996-d2d0-4292-b3fb-12b96c46a0ce/img_2222.jpg)
