Counting matching models…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…
This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for…
Spool Winder Spool winder for filament and other spools with a maximum dimension of 210mm in diameter and 76mm wide. If the spool axle is inset then wider spools may be accommodated. Spools should be a minimum of 30mm wide with an axle…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
This is a remix of my PrintDry Pro spool adapter (which in turn was a remix of a Thingiverse design by Skrutt84: Ender 3 - Filament holder DELUXE). This winder will fit spools with center holes up to about 80mm diameter. Use with a…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “STAND” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY…
Based on the experience with my previous remixed Advanced Stackable Print-in-Place USB Cable Winder , I found out central winding not to be optimal when it comes to thicker cables, especially modern high-quality USB-C cables. Thus, here…
Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…
This is a redesign of the famous Print-in-place Stackable Cable Winder . The original design has a weak spot: The walls of the core are rather thin and tend to break easily. This redesign has a different core with thicker walls, better…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “Motor Drive for Stand - Auto-Stop Function” for an amazing project " Filament Spool Switcher & Winder" Design…
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…
This is a Remix “Winder Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 BEFORE STARTING THE PROJECT, YOU SHOULD CALIBRATE THE PRINTER AND FILAMENT AND PRINT THE…
Hi guys, this is a remix of squinn's well designed Portable Cable Organizer / Winder, I thought there's a room to improve, specifically I improved the retraction of the cable where there is a foldable handle with which you can retract the…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…
This is a Remix “Spool Brake” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING ITEMS FROM THE LINK BELOW…
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024:] Added versions without the 2…
Stackable Cable/Cord Winder Organizer These stackable cable organizers let you wind up your phone and device cables easily for storage or portability. Coming in at multiple sizes depending on the cable thickness and length you have. Keep…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…
The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice: Bigger clearances The hinge won't stick or break as easily Different latching mechanism More…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Wanting to use different sources for filament, often with cardboard spools (or refills) I decided early on that I needed a filament rewinder. Not fully satisfied with existing offerings, I made my own. I didn’t want to power it by hand or…
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Update 2023-01-13: Addition of Hexa, Triangles, Circles, Plain patterns in addition to the original Voronoi Slight redesign of the overall assembly to limit the friction Other versions Regular charging cable : Same patterns, but for…
A RepBox compatible or standalone rewinder system for Prusa MMU2 & REPLACE THE BUFFER BOX! ;) >> Non-Printable Hardware Kits Available Here >> Assembly Video Here UPDATED 2/5/22 RackStands for RepBox v2.3.1+ and RepRack are now AVAILABLE…
CAD file . The supplied models are separated based on meter width, in this case 19mm and 21mm, close to the most common widths, at least from what i could find, i had a 19mm. These values are the maximum meter width that will fit. If you…
This is a remix of @IvoSlanina's great Rope Winder model. I took some material out of the centre so it prints faster, using 40% less filament. It's still very strong. I also increased the hole diameters from 4mm to 5.5mm because I…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Introducing a newly designed filament rewinder with virtually endless expansion possibilities . Main Features: Modular design for easy customization Sturdy and compact construction Minimal extra parts required: 7 × 608 bearings, 2 × 3 mm…
I created this remix because I have a lot of old spools that are relatively narrow (Wanhao maybe?) . Some are 48mm and some are 50mmm wide and I wanted to use the winder for them as well. While I was editing the parts I also modified the…
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
https://www.printables.com/model/1453503-wool-winder-upgraded-parts ^Checkout this remix, it's an upgrade over this model. This design is a work in progress. SO: "I want to buy this wool winder and yarn swift, it'll help me kit better"…
Back in Black! For no other reason than because I have more bulk black than white this time. This is the second revision of my canter lever filament spool winder. You can find my first version here , along with the original description,…
I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
Simple and ergonomic fishing line winder in five versions. Since I am an avid angler, I could not help but make this device. You can choose one of the five winder options. Or print all options, as I did. Some winders are best suited for…
Spool winder with a hexagon spigot to fit a power drill
The Yarn Winder is a manually operated tool for creating center-pull yarn cakes from yarn hanks. It works best together with a yarn swift (not part of this model). The goal was to design a model that requires only a few additional,…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
EDIT: the shape of the outer prongs has been modified so that they dont bind when winding. Use 6 walls + 8 bottom/top layers. A simple drill-powered tool that quickly rolls up ratchet straps, making storage much faster and keeping your…
I couldn't find a nice bed template for the sidewinder x1. I hope you like it.
NOTE:2/1/23 Sorry took so long to get back to this. After a lot of testing I have come to the conclusion that a NEMA 23 stepper with an external driver is the way to go to get the torque needed to wind a full spool reliably. So, I am…
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
UPDATE 02/08/2023: Uploaded a V3 repaired frame file as there was an issue with the V2. The Spool Winder by Les Kaye is a great model, but there were a few things I wanted to do differently, so here we go. First, I redesigned the frame to…
When I was looking for mods for my artillery sidewinder x2 I had to look for them one by one, that's why I have made this compilation of all the mods that my artillery sidewinder x2 has. The vast majority of these designs are not mine, so…
I designed this paracord winder with added holes in the handle to attach to your backpack when hiking or camping, so you always have spare paracord when needed. If you like this model, check out my Rope Tensioner, Rope Hook and Webbing…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one. Dimensions are approximately 140 mm x 55 mm x 5 mm. It provides room for up to…
Eine kleine, runde Dose mit einem Gewinde. Die kleine Dose kann auch als Zahndose verwendet werden. A small, round box with a thread. The small box can also be used as a tooth box.
Author : TinkrMakr I changed the angle to 45° because I read in the comments that some people had problems to properly print the lower part of the model. I had the same problem, but I don’t think it came from the angle of the model but…
Fusion360 custom thread profile for soft drinks bottles (PCO-28 spec). Unzip to \Users\ {USERNAME} \AppData\Local\Autodesk\webdeploy\production\ {NEWEST FOLDER} \Fusion\Server\Fusion\Configuration\ThreadData Note: You'll need to change…
UPDATE: Thank you for taking a look at this project. I still use mine - but there is now a more active implementation of this modular idea that you would probably be better off printing. Please see:…
Hi guys, if you wonder what to do with empty spools here's my 3rd iteration of Spool winder (see previous version here: https://www.prusaprinters.org/prints/5114-spool-extension-cord-winder ). This winder works with empty 1kg spools from…
PET Gewinde für Cola Flaschen und alle anderen. Kann zum Modelieren in Fusion 360 oder anderen Programmen verwendet werden, wenn man zum Beispiel etwas designen will, was ein PET Gewinde benötigt und man sich keine Gedanken machen will,…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
Quick remix of this brace to fit the new screw hole position of the sidewinder X2. To be clear this will not fit with the second part of the brace from the original (threaded rod.) There are now braces that fit correctly for the X2 if…
Includes Hexa, Circles, Triangles and Plain patterns for extra fun. Other versions: Apple Watch charger : Same pattern but for the Apple Watch charging cables Introduction Charging Cable Winder Organizer – the perfect solution for…
Apple Watch Charger Case With Cord Winder. This is a Print in Place cord winding case for Apple Watch chargers. Two separate models to work with variations in Apple Watch Chargers. I have also added the gcode and 3mf files for the color…
BEFORE IMPORT CONFIGS YOU NEED TO HAVE KLIPER 0.4 PRINTER ON ORCA , IF YOU DONT HAVE THIS AN ERROR WILL POP UP THAT SAY 0 CONFIG IMPORT (SEE PHOTO) I have used this profile for big and small prints so its safe and tested you can see the…
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
Guitar string winder tool. fit with bearing 608 without any tools. Manivelle pour mécanique de guitare se monte avec un roulement 608 sans aucun outil.
Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…
These are various parts for the EEW Cone Winder . There are some Fusion 360 files which allow you to generate cones or tubes of different sizes. Below is a video that goes into depth about how those works.
This is a manual filament spool winder inspired by the bmsluite model, originally made for splicing and winding multiple spools of leftover filament onto a single roll. From there it has been modified to achieve a simple and effective…
Level Wind (Diamond Screw) Saw this the other day on a filament respooler model and HAD to model it up and try to print one; such a cool concept. The level wind (diamond screw) allows you to rotate a rod in a single direction, yet the…
Introducción Quería que el modelo fuera imprimible totalmente en PLA, para que todo aquel que tuviera una impresora de cualquier gama, pudiera hacerlo, no tiene rodamientos, no tiene tornillos, todo es en PLA. Funciona perfectamente, es…
RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…
Crossbar remix
Knife and fork sidewinder for camping and outdoor trips. You can also just use it as a fidget toy! Simply flip it out with a quick upward move of your hand, or slide the left side up! The blade and fork are easy to replace because…
Wind your yarn skeins to a cone for knitting. This winder comes in two main versions: manual and motorized, see description and STL folder structure for further details. (Due to continuous design upgrades, I will not replace every picture…
A 60-inch (150 cm) tape measure holder/spool/winder. Compact and very smol (42mm diameter). Easy to print and assemble. Support is required for the spool part. Tolerance: 0.2mm Category: Tool Holders & Boxes
This winder applies the design concepts used in @TinkrMakr 's model at https://www.printables.com/model/60527 to a smaller footprint. Compatibility This winder is designed for USB type C authentic Apple Watch chargers. The charging puck…
Edit: 09-May-2023: Part #3 added: Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally: The big base part was reported to be poorly fixed on your workbench, so I extended the base…
Update - 04/09/2024 Redesigned the complete model from scratch because some "friendly" user notified me of possible flaws in the design. Repositioned the holes (in sled as well as the filament guide) and made them a bit smaller (sled) to…
Geeignet für kleine Mengen zum umspulen. Es lassen sich alle gängigen Größen montieren auf der Antriebswelle. Das Testgewinde ist gedacht für die Richtige Scalierung vom Gewinde. Ich musse x und y auf 98% setzen im Slicer. Z darf…
J'ai eu besoin de changer toutes les cordes de ma guitare, et je me suis dit que c'était le moment de dessiner ma propre Manivelle pour tendre les cordes de guitare. Je me suis inspiré d'un modèle Dunlop adapté à mon besoin. Il ne…
The Open Source Watch Winder (OSWW) is an open source high quality, modular, watch winder. For $40*, you can build yourself a 3 watch, watch winder, with user-replaceable parts. Key Features Quiet belt drive Bi-directional winding; winds…
What's this? Wind up cables, string or ropes of all lengths and sizes with this simple print. 6 different sizes included from 60mm to 126mm (distance between tips of the prongs). How to print I used a 0.3mm layer height, 40% infill and no…
I created a new pipe for the 5015 fan. It is printed without supports. On the triangular surface where the fan is mounted. This one is with ball bearings. The flow is much better than with the original fan. The fan is at an angle. It…
Need a way to store your lightweight wire antenna for Summits on the Air or Parks on the Air activations? This winder fits 70 feet of 26 ga wire or smaller for a 40 m end fed halfwave or random wire antenna built from one of my kits from…
Sidewinder X1 Bed Side Cable Chain Relocation Preparing to put my Sidewinder inside an enclosure I was not happy with the space taken up at the back of the printer by the bed wiring and needed a solution to fix the kinking from the stock…
I remixed the design so a 150 cm (60 inches) could fit in, which was not the case with other versions. I also added a little handle to rewind it faster. Since I printed a couple of those (as gift), the ones that I put a tiny bit of grease…
UPDATE: I have published my Canterlever Filament Spool Winder (MK2) . This touches on every part. The overal dimensions and shapes are much the same, so some parts from the MK1, will work fine with the MK2. So for example, if you would…
The shortened source cradle positions the source spool at a similar distance from the lead screw as the target spool. It's suitable when both spools are of similar size, minimizing space requirements.
Dose mit Gewindedeckel. Durchmesser 80 mm
![#0164 Mini Paracord Winders for the Pack [4 Variants]](https://media.printables.com/media/prints/882186/images/7020696_f2dda904-3cb0-4d82-af08-0a6562f1fddf_366f2abf-6147-415f-ab10-7b27d3b84067/rl-20240621-017.jpg)
