163 models
So, after many iterations and some bad behavior from my printers, I'm finally releasing this mod, or should i say costume? Basically, this is a custom front plate for my direct drive mod. As a Voron owner and a big fan of Voron printers…
Whenever you want to have your Twotrees laser engraver higher...
-PT-BR Esse mod tem como objetivo trazer o Afterburner para a Bluer. O Afterburner "stock" é ideal para ABS porém deixa a desejar com PLA. Como a Bluer é muito usada para imprimir PLA, uma opção melhor seria utilizar um MOD chamado AB-BN…
12.02.2023. sapphire new version v3 finally go time to print all parts, not just virtually check in fusion 360. Now one of last version 3 is out and belts finally are parallel. p.s. Some printers can be different sizes, gen1, gen3, and…
This mount keeps the nozzle in the same place as the stock nozzle, so no loss of print volume on any axis. Uses original mounting system, no extra hardware required. Base model with optional: Dual 5015 ducts Single 5015 duct (remix of…
The original design has a large flat bottom, which for some reason would always sag downwards for me, sometimes colliding into prints. This remix minimizes that bottom surface such that the sag points are eliminated. The bottom is also…
The fixed length column for TwoTreess' TTS-55 to adjust the laser focus with an installed Air Assist that the manufacturer forgot! If you have installed the original Air Assist, the distance to the workpiece changes. With this model, you…
I 3D modeled the legs that came on my Two Trees TTS-55 Pro and added a 3/8-16 thread to the bottom to add extension risers of various lengths. The extensions are 10mm, 20mm, and 40mm columns with the same 3/8-16 thread. I also made a…
I printed in PLA, any material is ok. Please note than I had to print a new board support in order to move usb cable on the right allowing to put the board on the left. This is needed to shorten the path as much as possible otherwise new…
Work in Progress 24.01.2024 - I am waiting on my plexiglas panels 27.01.2024 - The first prototype is put together. I've discovered multiple promblems/fixes/improvements I wanna do. 27.02.2024 - Added a Model…
I've only had my TwoTrees SK1 for a week now, and have had to remove the front toolhead cover to disassemble the extruder & hotend twice already. Since my hands don't work especially well these days, dealing with the poorly designed cover…
Case for MKS DLC32 board and TS35 screen for TwoTrees engraver TTS55 or TT5.5S. You need : - 2 screws M3x10 for frame 20x20 mount - 2 Tnuts M3 for frame 20x20 mount - 7 screws M3x10 countersunk head - 8 screws M3x5 for the board and…
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
I needed a STL of the TwoTrees SK1 base plate for Orca Slicer profile so I created one. This is 100% accurate to the original plate. You can use it for what you want ! Don't forget to drop a comment if you decide to use it somewhere, it's…
I wanted a rigid and light weight mount for the BL touch to reduce the variation in z-offset between prints so I designed this one. Y Offset : -40 X Offset : 0 Print Settings Printer: Twotrees Sapphire Plus Rafts: No Supports: No…
This new design utilizes the existing Sapphire Plus frame components, and it allows better and more accurate printing quality at much faster printing speeds. This design also allows using VZBot or RatRig EVA printing heads at expense of…
V4 of the printhead is out! https://www.printables.com/model/418000-poison-printhead-v4-twotrees-sapphire-pluspro update log: 06-12-2022: small change to the cooling duct because it was a little too close to the hotend. This is the…
This is a small variation, just 35mm tall, of my big toplid for the SK1, this one is just laid on top of the printer. Its registered via the buttonheadscrews in the top. I did NOT print this Lid , but since it's a variant of my big lid it…
Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine. Designed for holders that use 80x25 mm mounting hole distances. This plate is thick for a reason! You need a specific distance from the router to the machine so…
Manual Z-axis for focusing Two Trees TTS-10 laser engraver, replacing original height adjustment mechanism. Laser mounting plate with multiple offsets, for different laser builds. Mounts to laser module with 4 M3x12 screws.…
Printed the original model. I am using air assist and the model requires modification for that because of a valve stem that sticks on the side, and because it changes the dimension of what is at the bottom of the diode. I made this remix.…
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Prologue This is a WORKING remix of the SP-5 H2 mount by Lee82UK. The original design had several flaws, including by not limited to: Impossible to mount 2 5015 fans on this extruder and not hit the SP-5 frame. The BLTouch probe when…
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Print with at least pteg but I personally like PC-CF filament, 4 layers, 4 perimeters and 25% infill will be ok. chain what I got - https://www.amazon.co.uk/gp/product/B09NKSPKS2/ plus you need x6 m4 screws extra plastic inserts, 2x for…
All but main body part 1 can be printet without support.
Overview This design lets you attach the Smart Orbiter v3.0 to the TwoTrees Sapphire Pro. My goal was to have a compact design that looks tidy and gives you a good view on the printhead. Also I designed with minimal support in mind.…
1. Komponentenübersicht: Leisten: 4 Stück à 250 mm 2 Stück à 70 mm (links) 2 Stück à 70 mm (rechts) 2 Stück Türscharniere Eckverbinder: Verbinden sie die Eckleisten an den Originalbohrungen mit jeweils 3 Schrauben. Filamentdurchführung:…
For TwoTrees SK1 a modified extruder cover to avoid TPU jamming. Also the spring is too long, cut 2mm or change with a new one 6 mm outher diameter, 10 mm long and 0.7 mm wire diameter or 0.6 for softer feedback (needs to be screewed more…
- ugly remix of the corner mounted stabilizers to be compatible with inward facing enclosures - remix of the X rail idler stabilizers to give the belts even more room and be better compatible with F695 bearings (now actually) First…
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
I tried to find an existing mount to install the TZ hotend on my printer, but I couldn't find one, so I made it myself. You will also need to print the belt tensioner made by ‘jaaanik’ ( Link ). An M3 x 4mm bolt is additionally required…
Hey fellow printer enthusiasts! I’ve got a quick and easy print to replace the P-clip holding the PTFE tube on the Two Trees SK1. The original way the PTFE is held isn’t the best, so I came up with a solution to keep the PTFE in place…
Adapters to fit a Bigtreetech Octopus Pro, Octopus v1.x or other mcu with 150x90mm mounting hole pitch. The Octopus board is too large to fit in the orientation of the original MKS Robin board, so these adapters also change the…
Filament guide for direct drive sapphire pro SP3 Best results printed with 100% infill Hole for PC4-01 Connection but will work without If you like this design please post a make or leave a comment Thanks for looking
Although the TTS-55 Pro doesn't come with endstops, its controller supports adding them. These mounts are designed for a common 40mm length endstop that almost always comes with cables and a red circuit board. They can be found easily on…
When upgrading a TwoTrees printer to Klipper the original MKS TFT35 display is not compatible (at least I found no way of using it). However, common 3.5" Raspberry Pi touch screens are exactly the same size and work fairly well with…
Mount to replace the internal 40mm with a 120mm fan for much quieter operation. Uses the existing screw mounts; a strip of double-sided tape may be required to support the far end if you have a heavy fan. Important: this is for the 2022…
Spool holders for Twotrees Sapphire Plus... Among other things wrong with the Twotrees Sapphire Plus, the bolts protrude from the stock spool holder, leading to some filament spools becoming caught/jammed against them... I decided to…
Its a simple replacement for the original SK1 bowdentube guide, since the original one hat a much sharper turn than desired.
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
A 20mm riser for the base to accomodate a bigger fan. For the installation you need to follow the procedure shown in picture 2&3. Both parts are needed 4 times. Parts needed: 8-12x M3x5x4 Voron Style heatsetinsert for the Backplates. Ive…
I add the WS2812B LED HW-335 circle 3 bit module
An adapter for 120x15mm fan for the TwoTrees SK1. MCU Temp. dropped around 25°C BASE RISER NECESSARY One of the Parts can be used with magnets. If this is not desired you can either use tape to glue it to the frame or use the part to…
Laser modul mount for Twotrees TT-50 I used 4x M3x6mm for the laser module and 2x M4 Bolts for the slider. Thumbscrews would have been a better choice if I had some. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
TwoTrees SP-5 SP-3 (Sapphire Pro, Sapphire Plus) MGN12 X axis centering protractor for easier centering of rail on X axis while mounting of it. Made for tight fit (if you printer prints with right dimensions of course :) )
WIP, print in asa/abs for better heat tolerance. When using EBB42 board there's two caveats: The switch does not fit comfortably, I'm using sensorless homing for the x axis You need to turn the plastic for the canbus wire by 90 degrees so…
I recently purchased a TwoTrees TTS-20 Pro laser engraver/cutter. It was a deal from the manufacturer, one of the final sale “return” sales. Sadly, it was missing many pieces, including the focus tool to help focus the laser against your…
The Sapphire Plus came with a filament sensor but without a mount, I remixed a cable clip to make this mount. Cable clip by matt448: https://www.thingiverse.com/thing:2731180 Print Settings Rafts: No Supports: No Resolution: 200 Infill:…
1x https://www.amazon.de/dp/B09QM4DLKK?ref=ppx_yo2ov_dt_b_product_details&th=1 Schrauben/Screws 1x M8x20 + 2xM3x12 Selbstsichernde Mutter/Self-locking hexagon nut 1xM8 Beilagscheibe/Washer 4x M8 8,4x16 Kabelbinder/Cable strap 2x T-Nut 3m…
Almost 200g lighter model, all parts printed, use couple of m3x40mm and m3x30mm screws and nuts for stronger, but can use also brass inserts, easy edit if need. First i try print out EVA2, and EVA3 hotends, but than i need some how move…
avaiable on cults3d: https://cults3d.com/en/3d-model/tool/poison-printhead-v4-twotrees-sapphire-plus-pro This is my own design, inspired by the vzbot printhead. I made this for the Twotrees Sapphire Plus (SP), but I think it will also fit…
Hey fellow printer enthusiasts! I’ve got a quick and easy print to replace the P-clip holding the PTFE tube on the Two Trees SK1. The original way the PTFE is held isn’t the best, so I came up with a solution to keep the PTFE in place…
Erstmal vielen Dank für die Idee. Ich musste allerdings den rechten Absaugstutzen ändern da sich meine Absaugung links befindet. So konnte ich den Schlauch über die Traverse führen und mit selbst erstellten Klammern fixieren. So…
Description I designed very rigid and simplistic direct drive mount for my TwoTrees Bluer V2. I haven't found a solution that fits V6 hotend and have proper 5015 part-cooling fan. My main goal was to use a minimal number of external parts…
Bigtreetech PITFT50 display base for TwoTrees Sapphire Plus V2. Place 4 M3 metal inserts to fix the cover with the screen to the base. To fix it to the printer, it can be done by drilling 3 holes to use M4 screws or use double-sided tape.
This system is designed to work with the afterburner mod for the twotrees sapphire, I never tested it with the original hotend. A modular system composed of 2 pieces to align the extruder to the hotend trough the original metallic mount.…
Mjolnir is a hotend assembly for the TwoTrees SP5 / Sapphire Plus, that utilizes Phaetus Rapido, Orbiter 1.5, and a Pinda Probe. It uses the original fans, so no need to buy new ones. Some M3 bolts and heat inserts are needed.
Twotrees laser CNC are by default raw. no clean cabling etc… I decided to start having clean power supply holder. Slot is for Y axis cable…
Replaces the rather useless metal plate that is covering the control board of the printer with a chamber heater. Uses the readily available PTC heater modules; “220V AC 300W” in my case (more like 450W btw). The housing of the module…
Direct-Extruder mount to attach an Annex Engineering Sherpa Mini or Sherpa Micro on a Sapphire PRO SP3 and SP5 Printer. It's compatible to the original and custom hotend solutions of the Sapphire SP3 and SP5.
Hey fellow printer enthusiasts! I’ve got a quick and easy print to upgrade the spool holder on your Two Trees SK1. The original holder only accommodates spools up to 68mm wide, so I designed a new one that can hold spools up to 80mm wide.…
Just Shroud for your Mainboard and Steppers. I change the Stepper power to 1,8 amp, so I need better cooling. Use some Double side Tape and that is I printed in PLA for Tests. I recommend PETG or ABS/ASA Enjoy
These service rockers attach to the TwoTrees Sapphire Plus to allow you tilt your SP5 back and up off the table without crunching stuff along the back of your printer. This was designed to be used with the panels that TwoTrees sells with…
Used to mount a SKR Pico and a Raspberry Pi inside a Sapphire Plus. You will need eight M2.5 screws and nuts to hold the boards in place and four M3 screws to mount it in place of the old mainboard. You will also need to replace or…
In my never ending search for things to print to add to my printer I needed a case/mount for my Pi Cam. This was quite difficult as I could not find anything pre-made (like how there are millions of things for the Ender3). I had to…
This is the ducting adapter I used in my TwoTress TS3 Enclosed Laser Engraver video, it allows you to connect the stock 6mm ducting to another 120mm fan and 4" ducting to exhaust the smoke. Category: Parts
I decided to reduce the load on the stepper motors in my SK1 printer by using F8-16M thrust bearings (8x16x5 mm). To ensure proper installation, I added centering rings, allowing the bearings to stay perfectly aligned with the lead…
50mm x 40mm x 20mm - 3 mm countersunk hole for a screw. You can tighten just one screw, and it will still hold perfectly because of the flat metal legs of the TTS-10 Pro. If the inner part of the mount bothers someone, it can be removed…
Adapter to replace a Makerbase Robin TFT35 V1.0 as found in TwoTrees Sapphire Pro SP3 and other printers with a FySetc, BigTreeTech or Makerbase Mini 12864 Display. Also compatible with the Voron STM32-Mini USB-Adapter (…
Model based on what's mounted on my SP-3. Will be probably further used to model whole printer. Included both mesh and F360 project file.
A Simple holder for an auxiliary 12032 fan. Parts needed: 2x M4x8mm 8x M3x10mm 7x M3 Heatsetinsert 4x for the “crossbeam” 2x for the fan 1x for the duct 1x M3x15mm Duct I've used:…
i made a few small upgrades for my TT Sapphire printer. There is an endstop mount for the X endstop switch. you might need some shorter than stock m2 screws to mount the endstop to the part. There is a modified stepper motor mount for the…
Since the printer already comes equipped with 2 4010mm fan, we can use them in a smarter way. This model is a very fast, print-and-install upgrade for the Sapphire Plus I also included a print modifier you can use to get the same effect…
Twotrees Releases Introduced the case. The original holder was too small for my purposes, so I drew a more stable holder and am I making it available to you. 3x M4x14 Screws 2x PETF Tube with a diameter of 4mm I used ABS to Print Petg and…
A conversion from 2x 4020 cooling fan to 1x 8010 fan over the mainboard to cool stepper drivers and host CPU heatsink. To do this mod you have to change the stock heatsinks of the TMC2209 drivers with low profile type, better use copper…
This is a remix of https://www.printables.com/model/684996-laser-engraver-riser The only difference is the height as these models are reduced by 25mm.
Simple stand to safely stand up the TTS-55 on it's side when not in use and help with storage
My spool handling system for all my FDM printers consists of a 30mm diameter tube that attaches to each of my printers, and a spool adapter kit that fits that tube. I've included the tube and nut so this can also function as a basic spool…
CYD ESP32-2432S028R 2.8" display for Klipper Here project's site: https://github.com/suchmememanyskill/CYD-Klipper Built a support for the TwoTrees SK1 display. Modified the box to use the JST 1.25 4way plug provided with the screen. It's…
Twotrees sapphire plus side spool holder Print on side with supports After moving to a direct drive setup I needed to move the spool holder and this is what I came up with, I printed with 100% infill using standard PLA and its still fine…
This is a reducer for 100mm to 70mm pipe that fits the TwoTrees Laser enclosure that is 780x720x460 as pictured here. You can use the original screws that came with it if you wish, but if you are deleting the ridiculously tiny fan (keep…
ABS material and 100% fill amount
MAD - Modular Air Duct for BIQU H2 base with mount for twotrees bluer
I have a TwoTrees TT25 Laser Engraver that I've just started working with. I was watching this video https://youtu.be/UeF0NW0m1Y8?si=MSqPCJgPEvX__Kvs that talked about adding a crosshair for improved precision. I decided that I wanted to…
This is my mount for the NFSunrise/NFSunrize hybrid direct driver extruder and cold end, for the Sapphire Plus CoreXY printer. This setup allows printing with flexible filaments, and doesn't compromise speed/acceleration with too much…
Designed to securely hold the bondtech lgx lite extruder. Category: 3D Printer Parts
This is a cosmetic upgrade for Two Tree's Sapphire Pro/Plus Hotend. This will hide those ugly wires and give support on top for those wires. Do NOT forget to install the spacer, this cover will prevent your Y axis from homing because the…
This is a heated bed dragchain kit for Two Trees' Sapphire Pro that is compatible with/without the enclosure, and you do NOT need to drill any holes. It took me 17 10x10mm drag chain links to connect the base with the heat bed. You will…
This is a small change to the original posted by G4Cab. I removed the Chain STL's, they are just not worth it. I lengthened the Cable Management for the 10x20 Chain setup and combined the cable management for the 7X7. You can purchase a…
BigTreeTech SKR Pico and Waveshare cm4-nano-b mount to fit into the TwoTrees Sapphire PRO SP3. Should fit in the SP5 as well. The alignment of the Waveshare cm4-nano-b carriercase may look unintuitive, but it is required for the air…
This is a simple system I put together to simply add a hood to your Sapphire printer. You will need to print 4. I suggest you create a modifier box on the bottom high enough to go over the screw base. I included pics. Material: ASA or ABS…
base para colocacion de tiras led
TwoTrees TT-5.5S laser - Silent cooling With this reduction, you can use a 60mm fan from Noctua instead of the stock 40mm fan. Higher air flow, minimum noise. I used this reduction model as a basis. You will have to extend the cables from…
Porte bobine pour Twotrees SP5 (V3) pour l'avant gauche (peut être imprimer en miroir pour les autres coin. Spool holder for Twotrees SP5 (V3) for the front left (can be mirrored for the other corners.
By aligning the auxiliary laser in a cross, you create a "home position" anywhere on the work surface.
This adds an ADXL345 mount to a Drag Chain adapter for the TwoTrees Sapphire Plus. I believe it will also work for the Sappire Pro.
Do you want to separate the mainboard from your 3d printer? You can try this! IMPORTANT: I personally designed it for the Robin Nano V1.2 from my Twotrees Sapphire Plus, but it seems that all the mainboards from the nano family have the…
Update 23/04/13: Pin for the different Z Systems Update 20/07/21: added more Z Pins with 38-42 mm high for thicker heating bed Update 20/04/18: added adjustable Pin for Y V2 Update 20/04/17: added adjustable Pin for Y Printing without…
Good day, Welcome to my profile, full of models and miniatures :-) I'm an Ainon3Dprint model maker and printer I have here for you a calibration cylinder for a twotrees or sculpfun S9/S6 laser, or others. It has a size of 20mm for setting…
![Idler stabilizers for TwoTrees Sapphire Plus SP-5 [REMIX]](https://media.printables.com/media/prints/533794/images/4307696_505d4727-863b-4afe-957e-dd1acbb8e110/screenshot-2023-07-23-090432.png)
