P
PrintablesArtieH
Pumpkin
Just a plain pumpkin. Category: Food & Drink
- Pobrania
- 3294
- Polubienia
- 148
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesArtieH
CoreXY Calibration
Update: New Calibration Octagon. (Calibration OctagonV2) Prints faster Updated extruded instruction text Updated V notches This procedure makes use of three calibration objects. An Extrusion Cylinder, a Calibration Octagon and a 100mm…
- Pobrania
- 1083
- Polubienia
- 105
- Ocena
- 5
P
PrintablesArtieH
Cat Exercise Wheel
Only a few small test pieces have been printed to test the fits; otherwise this is still non-printed and under development. Files, instructions, and other stuff might change! UPDATE: Added “Side Race 2.stl” I saw a Facebook post showing a…
- Pobrania
- 1031
- Polubienia
- 288
- Ocena
- 5
P
PrintablesArtieH
Cat Food Lid with Stacker
11/7/2021 Update: Added 5.5 Oz Lid with tighter fit (Catfood Can Lid 5.5oz v6.stl) 11/6/2021 Updates: Added 3.0 Oz Lid with a better snap action. (Catfood Can Lid 3oz v11.stl) Added 5.5 Oz Lid (Catfood Can Lid 5.5oz v4.stl) Added Stacker…
- Pobrania
- 852
- Polubienia
- 95
- Ocena
- 4,8
P
PrintablesArtieH
Fluffy Unicorn Bank
This is a remix that utilizes the source idea but it is designed from scratch. This remix includes: Larger coin slot Larger access hole Print in place quarter-turn access plug I found this to be a great little project to make as a gift…
- Pobrania
- 684
- Polubienia
- 73
- Ocena
- 4,73
P
PrintablesArtieH
Feline Phone Stand
Update: Added a holder with charge cord slot. A cat to hold my phone while I watch cat videos. It can't get any better. Print Settings Printer: HyperCube Evolution Rafts: No Supports: Yes Resolution: .3 Infill: 15% Filament: 3D Solutech…
- Pobrania
- 601
- Polubienia
- 65
- Ocena
- 4,5
P
PrintablesArtieH
Raspberry Pi 3B+ Octoprint Case with Fan
Note: This case is designed for the Raspi 3b+ if you need a case for the 4b it is linked here . This case is designed arround the Raspberry Pi 3b+ and provides for mounting a 30x30x7 mm 5V fan. Features * Case cover with OctoPrint Logo…
- Pobrania
- 548
- Polubienia
- 77
- Ocena
- 4,78
P
PrintablesArtieH
Display Hanger/Banana Hook & First Layer Torture Test
This is a display hanger that has more uses than for what it was designed. I designed this hanger to display another of my designs, the Monster Hunters Scoutflies Lantern . But, my wife immediately thought it also was a beautiful hook to…
- Pobrania
- 548
- Polubienia
- 79
- Ocena
- 4,7
P
PrintablesArtieH
50 x 10 mm Fan Mockup
Update: Corrected spacing of mounting holes. Had a need for this and couldn't find it. So her you go.... Mockup of a 50mm x 10mm fan. Category: Other
- Pobrania
- 335
- Polubienia
- 6
- Ocena
- 5
P
PrintablesArtieH
Raspberry Pi 4B Octoprint Case with Fan
*This version is designed for a Raspi 4b with fan. If you need the 3b+ version it is linked here .* Update: Per a user request I've added a case version that uses 3mm case screws. Warning: I have two Pi4B's and neither of them have…
- Pobrania
- 320
- Polubienia
- 33
- Ocena
- 5
P
PrintablesArtieH
Refrigerator Deodorizer
Update: Added a version with a threaded lid. This is an item that I designed and printed out of necessity, when one of those refrigerator experiments went terribly wrong. After hours of cleaning the leaky mess the remaining aroma was…
- Pobrania
- 309
- Polubienia
- 42
- Ocena
- 4,83
P
PrintablesArtieH
Angel Cat - Remix for FDM printing
Update: As requested, I've added an Angel Cat solid with Ring to the files. Update: My skills with Meshmixer are getting better. Decided to revisit this remix and post a version with the hollow filled in. Added the file…
- Pobrania
- 306
- Polubienia
- 49
- Ocena
- 5
P
PrintablesArtieH
Horse Racing Game
This is the first project I started after assembling my first 3D printer. It may have been a little too ambitious at the time and is why it ended up on the proverbial shelf. Well, I've retrieved it from the shelf, dusted it off,…
- Pobrania
- 258
- Polubienia
- 36
- Ocena
- 5
P
PrintablesArtieH
Credit Card Case
This case utilizes a slide lock that secures the credit cards within the case. The slide is pushed upward to unlock and then the case is pivoted to the side to open. The cards will then be splayed for selection. Print Settings: The model…
- Pobrania
- 242
- Polubienia
- 51
- Ocena
- 4,67
P
PrintablesArtieH
Monster Hunter World Scoutflies Lantern
Created for a cosplay at Katsucon 2019. To light the lamp I used: CR2032 round button cell battery holder 3mm LED Light Emitting Diodes Energizer CR2032 Lithium 3v Battery (1 Pack of 5) Print Settings Printer: HyperCube Evolution Rafts:…
- Pobrania
- 222
- Polubienia
- 94
- Ocena
- 4
P
PrintablesArtieH
Glass Bed Clamp
Feedback: This clamp worked great for many PLA prints; but, as of late I've been doing prints which required 100c bed temps. The clamps held for at least a dozen hour+ prints but then failed. 100c is the glass temp of both PETG and ABS so…
- Pobrania
- 172
- Polubienia
- 41
- Ocena
- 5
P
PrintablesArtieH
Settlers of Catan - Chits for 5-6 player expansion
I used Numbered Tokens designed by tvputten as my source to create this set. This is the full 28 tokens for Settlers of Catan 5-6 player expansion. The token letters are on the bottom of the token. A chit tube for storage is available.…
- Pobrania
- 146
- Polubienia
- 34
- Ocena
- 0
P
PrintablesArtieH
Retro Spin Top
This is my design of the tops I spun as a kid. They were wood with nothing more than a shouldered nail used as a tip. My brother and I would spin the tops in a hallway with a checkerboard tile floor. We competed for accuracy of the throw…
- Pobrania
- 140
- Polubienia
- 14
- Ocena
- 4
P
PrintablesArtieH
E3D-V6 / Titan extruder / BL Touch mount for HyperCube Evolution
8/1/2025 Added updated part cooling duct. (Part Cooling Duct V2.stl) Easier print and better air flow. 9/28/2019 I've installed this on my Hypercube Evolution and it is working well. I ordered my first spool of flexible filament and can't…
- Pobrania
- 132
- Polubienia
- 6
- Ocena
- 0
P
PrintablesArtieH
Raspberry Pi 3 B/B+ & 4B case with OctoPrint Logo
8/17 Update: Received my Raspi 4B and mounted it in the RASPI_4B OctoPrint Case. With the design changes, the case fits the Rasberry PI 4B well. Removed the WIP status. 8/14 Update: Fixed assembly screw hole supports. 8/13 Update: Due to…
- Pobrania
- 131
- Polubienia
- 9
- Ocena
- 5
P
PrintablesArtieH
Filament Lock
Note: I've used this Filament Lock and my Filament Retainer for more than a year. I have found the Filament Retainer design to be better suited to my requirements. I have recently updated the Filament Retainer by adding a nose to prevent…
- Pobrania
- 105
- Polubienia
- 8
- Ocena
- 5
P
PrintablesArtieH
Clip in LED Strip Holder for Hypercube 3030 Extrusion
This is a combination "Remix" and "Remix of a remix." The idea comes from Jfearnside 's remix of NedalLive 's LED STRIP HOLDER HYPERCUBE and SCOTT_3D 's Slot covers. I have remixed the two using the full size of NedalLive's design and…
- Pobrania
- 99
- Polubienia
- 13
- Ocena
- 5
P
PrintablesArtieH
Kossel Linear Delta Plus Corner Support
This design is based on kubik256's Anycubic Kossel Linear Plus Hardened Bed Corner . After printing I found that it was difficult to install on an assembled printer. So based on the design idea I struck out to design my own. Features of…
- Pobrania
- 98
- Polubienia
- 17
- Ocena
- 5
P
PrintablesArtieH
Safety Latch
This is a safety latch to secure a cabinet or drawer. Note: A safety latch is only a deterrent. Young children need to be watched at all times. Use of these latches is at your own risk. They work for me, but the files and instructions are…
- Pobrania
- 96
- Polubienia
- 23
- Ocena
- 0
P
PrintablesArtieH
Tineco Extended Crevice Tool
The original concept was a crevice tool long enough to reach the bottom of the clothes dryer's lint filter slot. I found, I'm now using this more than Tineco's crevice tool for general cleaning around the house. Printing Printed in PLA…
- Pobrania
- 90
- Polubienia
- 8
- Ocena
- 5
P
PrintablesArtieH
DIY Filament Dehydrator
This is based on the multitude of DIY videos and articles about adapting a food dehydrator for 3D filament use. This extension collar is designed for the Rosewill Countertop Dehydrator which looks mysteriously like the PrintDry Drying…
- Pobrania
- 89
- Polubienia
- 15
- Ocena
- 5
P
PrintablesArtieH
Reprap Full Graphic LCD housing for Hypercube
This is a remix of d3delta3d 's " Reprap Full Graphic LCD housing ." Changes made: Moved the cable access to the bottom of the housing Moved the fastening holes to allow it to be attached to 3030 extrusion Modified the emergency stop…
- Pobrania
- 89
- Polubienia
- 5
- Ocena
- 0
P
PrintablesArtieH
58mm Portafilter holder for Baratza Encore ESP Grinder
The portafilter holder is designed around the dimensions of the bucket supplied with the Encore grinder. The holder rails are sized for the Breville Dual Boiler 58mm Portafilter. Installation is as simple as sliding the holder assembly…
- Pobrania
- 88
- Polubienia
- 7
- Ocena
- 0
P
PrintablesArtieH
CURA Pause at Height plugin for Marlin Advanced Pause
Updated install procedure for Cura 5.0 and up. I got so tired of slicing and then editing GCode before printing, that I decided to dust off my very rusty Python coding skills and tackle modifying the "Pause at Height" plugin of Cura. So,…
- Pobrania
- 78
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArtieH
Bazelgeuse Spikes
Uniform spikes designed for Katsucon 2019. Print Settings Printer: HyperCube Evolution Rafts: No Supports: Yes Resolution: .2 Category: Costume
- Pobrania
- 72
- Polubienia
- 12
- Ocena
- 0
P
PrintablesArtieH
Ribbon Cable Clip for 3030 Extrusion
Update: This clip design is originally for the .1 mm thin ribbon cable that is supplied with the RPI Camera. I have added a new version that increases the clips gap by .5 mm. This is a clip to hold a ribbon cable. It that snaps into the…
- Pobrania
- 66
- Polubienia
- 11
- Ocena
- 4,5
P
PrintablesArtieH
Filament Retainer Clip
The nosed design is featured on David Wilson's YouTube Channel give him a Thumbs Up and Subscribe. You can also follow him as woodwaker here on Thingiverse. Update 4/26/2021: Added a nosed retainer for 3mm (2.85mm) filament. Update: Using…
- Pobrania
- 65
- Polubienia
- 3
- Ocena
- 0
P
PrintablesArtieH
Replacement impeller for Tetra Whisper Power Filter 40
The original impeller plastic breaks down over time and becomes brittle. The fins on the impeller fall off and the pump stops working. This is a replacement part for the impeller. Post-Printing Assembly The impeller assembly consists of a…
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesArtieH
Anycubic Kossel Delta Panel Enclosure
From day one of owning the Anycubic Kossel Linear Plus Delta printer, I was annoyed by the design of the open control panel. It not only makes the printer look unfinished, it puts the electronics at risk from impact, strain or short…
- Pobrania
- 60
- Polubienia
- 3
- Ocena
- 5
P
PrintablesArtieH
My Build Log of Scott_3D's Hypercube Evolution
Update 4/12/202 Ordered new .9 degree motors for X/Y axis and new belts and idlers. Will update when I receive the parts and start the work. See Update # 15 I'm sorry that Thingiverse has turned this build log into a difficult read.…
- Pobrania
- 53
- Polubienia
- 17
- Ocena
- 0
P
PrintablesArtieH
Canted Cooling Fan Shroud for 40mm Fan
Update: I recently upgraded my hotend to a genuine E3D-V6 Full Metal Hot End. I found that using the 40mm Noctua fan was insufficient to prevent heat creep. There were three symptoms that cleared once I installed the 30mm fan which was…
- Pobrania
- 52
- Polubienia
- 7
- Ocena
- 0
P
PrintablesArtieH
Thomasville Drawer Stop
After two of the drawer stops broke on my 30 year old Thomasville dining room drawers I searched for a replacement part. After days of searching I found the part is no longer manufactured and is unavailable. Using the broken pieces as a…
- Pobrania
- 49
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArtieH
Kossel Delta Plus Bed Clamp with Glass Clamps
Designed for the Kossel Delta Plus with 240mm heated bed. The clamp holds a 3mm thick heated bed and optionally a 3mm glass build plate. I have been using this on my delta for the last three weeks and I'm very satisfied with this design.…
- Pobrania
- 47
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArtieH
Cabinet Door Safety Latch
Update: Added a second version of the body and clip stl's which tighten up the clearance dimensions. Depending on the printer's abilities it will yield a smoother operating slide. Clip2.stl Clip_Body2.stl This is a safety latch to secure…
- Pobrania
- 45
- Polubienia
- 22
- Ocena
- 5
P
PrintablesArtieH
Clip on Diffuser for LED Strip Holder for 3030 Extrusion
This is a clip on diffuser that fits the LED Strip Holder Print Settings Printer: HyperCube Evolution Rafts: No Supports: Yes Resolution: .3 Infill: 20% Filament: 3D Solutech PLA Natural Clear Notes: This is printed on end with supports…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 0
P
PrintablesArtieH
Intake Duct for Controller Cooling Fan
I installed a controller cooling fan duct by lexaiden but found that the air pulled in under the heated bed caused problems when printing ABS and PETG. The bed would take too long to recover and the thermal protection would shutdown the…
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
PrintablesArtieH
Coffee Filter Separator
This is a printable version of a coffee filter separator. There are two versions, one that uses rubber bands and one that uses pencil erasers as the filter grabbers. I originally printed both of them in PLA. I found that the pencil eraser…
- Pobrania
- 39
- Polubienia
- 6
- Ocena
- 0
P
PrintablesArtieH
Anycubic Kossel Linear Plus Bottom Corner with Extruder Cable Pass Through
Thanks to peaberry for the original design and Johnnyboyye for his remix. All I did is fix an aberration that appeared in TinkerCad, and added a cut to allow the extruder cable to be dressed down the beam, under the cover and through the…
- Pobrania
- 37
- Polubienia
- 3
- Ocena
- 0
P
PrintablesArtieH
Ribbon Cable Management Clip
Update: Added a 5mm deep clip to use for small cables and also to hide excess ribbon cable. (The length can be scaled to your needs) These clips are to manage and hide a ribbon cable such as used by the Raspberry Pi Camera. These clips…
- Pobrania
- 32
- Polubienia
- 6
- Ocena
- 0
P
PrintablesArtieH
Catnip Enhanced Mouse
My cat Maya enjoys her catnip; and will meticulously spread it from one end of a room to the other. She also likes to kick around bottle caps, but they're too small to be safe. My first design of this toy was basically just a puck with…
- Pobrania
- 31
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArtieH
Happy First Birthday Cake Topper
The first birthday of my granddaughter is approaching... So I just had to make a cake topper. Print Settings Printer: HyperCube Evolution Rafts: No Supports: No Resolution: .2 Infill: 100% Filament: 3D Solutech PLA Clear and Red Notes:…
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesArtieH
Filament Lock with Cleaner
1.75 mm Filament Lock with Integrated Cleaner A comment on my original Filament Lock design asked whether it would be possible to integrate a filament cleaner. This filament lock with integrated cleaner is based on the previous filament…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArtieH
Christmas Countdown Calendar
This is a remix of Dsk001 's Perpetual Flip Calendar (W/ Customizable Font) . It has been remixed to be a countdown calendar to Christmas. See Dsk001's published design for more detailed information and instruction. The calendar countdown…
- Pobrania
- 25
- Polubienia
- 9
- Ocena
- 0
P
PrintablesArtieH
Replacement Animals for Fridge Farm Toy
I purchased a collection of children's toys on Let-Go. The "Fridge Farm Toy" had only one animal, a cow. I knew there must be more. I researched and found that there are 4 more animals. These are the replacement animals I needed to design…
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
PrintablesArtieH
Modified Air Guides for StealthMax V2
The original design did not prevent the exhaust flap from swinging down out of alignment with the exhaust slot in the main chamber. When out of alignment the servo jambs when the exhaust port is opened. The screw which holds the air guide…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArtieH
First Christmas in Texas
A First Christmas in Texas tree ornament. For all that have escaped the blue states and relocated to Texas. Updates: Added a 2023 version per request. Added a 2026 version Print Settings Printer: HyperCube Evolution Rafts: No Supports: No…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesArtieH
Toto Trip Handle Reinforcement
This part is made to fit the Toto trip handle for the model CST853 toilet. The handle wears over time and the metal that presses against the flush arm begins to break. The symptom is a sticking trip handle that keeps the flush flapper…
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 5
P
PrintablesArtieH
Dual 1219 Stylus Installation Gauge
I derived the dimensions for this replacement gauge from a Audio Technica AT-14Sa stylus installed using the original Dual gauge 50+ years ago, the Dual 1219 Owner's Manual, and hours of online research. My original gauge was lost many…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArtieH
BLTouch Mount for Hypercube Evolution
Update 8/7/2019: Modified the BLTouch Offset Mount to allow additional height adjustment. The BLTouch Smart V2 sensor requires an adjustment of 8mm +/- .5mm height difference between the bottom of the BLTouch housing and the nozzle tip.…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArtieH
3D Solutech Coaster
I've been using 3D Solutech Printer Filament for over a year now. It has become my main go to filament. There is one problem I have. Packaged with each spool is a round graphic sticker. I've been beside myself trying to come up with a use…
- Pobrania
- 17
- Polubienia
- 4
- Ocena
- 0
P
PrintablesArtieH
Filament ID Tokens
Since I print with multiple filaments, I wanted reminders of what filament was last used so that I can purge at the correct temp when loading new filament. After unloading filament from a printer I leave one of these on the print bed.…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArtieH
Stepper Motor Cooling Shroud for Hypercube Evolution
This shroud is designed for the Hypercube Evolution printer. Features: Can be installed without printer disassembly Mounts a 40 x 10mm Fan Material: 6 M3 x 16mm screws (4 for the fan and 2 for the shroud) 2 M5 x 8mm with Hammer Head nuts.…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesArtieH
Scariest or Greatest Halloween Pumpkin on Thingiverse
This is either the greatest or the scariest Halloween pumpkin on Thingiverse. Place a battery operated tea light inside and see which it is. Enjoy! Battery Tea Lights similar to these. I found them at the Dollar Store. Update: After…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesArtieH
Anycubic Kossel Probe Protector
When the probe crashes to the print bed, the original design works flawlessly protecting the probe switch from damage.The reason for the remix is that when probing the bed edges, the back end of the protector can come into contact with…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 5
P
PrintablesArtieH
3030 CoreXY Motor Shims
Depending on the motor mounts, the XY motors may be pulled out of alignment with the belts due to the torsional forces produced by belt tension. I had one motor that required a thin shim behind it to adjust the alignment. I decided to…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesArtieH
Heated Bed Cooling Fan
Print removal from glass is a breeze --- Particularly with this cooling fan. I don't know if this is something new or just new to me. I print PLA on glass with the bed temperature at 70° for maximum adhesion. The drawback is the bed temp…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArtieH
Vulcan Salute Device
To slow the spread of COVID-19, the CDC recommendations include social distancing. Social distancing includes restrictions on our cultural greetings. No longer can we shake hands, high five, fist bump, hug and kiss. Several other forms of…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArtieH
Spinner for a Clickity Clock
A spinner that is designed to mimic the spinner of Clickity Clock as seen in Netflix's Word Party program. The spinner is balanced so that it can spin freely in a horizontal or vertical orientation. It optionally can include a clicker for…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArtieH
Killjoy's - Hullen Cube?
Something to print in spiralize/vase mode and display next to all the Benchy's. After doing some firmware changes I needed something to print as a test. I didn't want to waste a lot of filament so I whipped this up. Have fun.... Print…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArtieH
Voron style BTT HDMI5 V1.2 Touchscreen mount for 3030 extrusion.
This remix fits the BTT HDMI5 V1.2 Touchscreen. The mount is designed for 3030 extrusion mounting to a Hypercube that I'm rebuilding to a Hypercube/Voron 2.4 hybrid. The accent strips from the original design will fit this remix. They…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.