Liczymy pasujące modele…
This is similar to the Skyliner toy from Disney World. Made it from scratch using Fustion360. Need to make some stickers for it next. Not too good at art but will be giving it a try. Will need to file the door parts to fit. Print Settings…
A larger version. Category: Organization
Replacement knob for LG gas range. Stock ones have issues with the chrome platting pealing off. Print in ABS or above to hold up to the heat from the oven. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No…
Logitech camera mount for 2020 tubing. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: No Supports: No Resolution: .25 Infill: 70% Notes: Printed in ABS Print with 4 shells and 4 layers top and bottom for added…
Was just playing with Fusion360 and came up with this. Printed it pretty fast (100mm/s) and it came out looking like yarn. Category: Decor
Single Bowden Extruder mount for 2020 bosch tubbing. Category: 3D Printer Parts
Needed one a little smaller than TJBLACKFORD's Dry Erase Marker & Eraser Holder ( https://www.thingiverse.com/thing:3097782 ). Also added magnet holes (…
This is a remix of my other designs. I hated having to put 4 screws in the back of the case to hold the face on. Pain in the b***. I was going through Fusion 360 tutorials and found one on how to make a snap together case. I made some…
Wanted a vertical mini arcade so I modded "Mini Arcade Machine" by iClint. I did change it to use all M3 bolt's except the M2.5's for the SD extender. Also cleaned up some spacing so thing fit better. Check the "Needed parts" for a list…
This is a simple replacement foot for a suitcase. It has 3.6mm diameter holes that are 26.4mm apart. Print Settings Printer: Folger Tech FT-5 Rafts: No Supports: No Resolution: 3.0 Infill: N/A Filament: ZYLtech PETG Black Category: Parts
I built and tested my XL 5 head on the kitchen table and needed to move it to my shop. Lifting the printer told me that it's very back heavy with all the components on the back side. I wanted to make the handles so it could be lifted by 2…
This is for those of you that are wanting a Raspberry Pi with a screen and the Prusa Screen with a Built in, OEM look. I've made the same type of setup for my other printers (https://www.printables.com/model/476852-btt5-12864-casev2).…
This is a mesh between Desk Organizer 2.Wide and my iPhone 7 Plus w/SwitchEasy Glass case. Hope it works for everyone. Need to use the stock Apple Lighting cable. Print Settings Printer: Folger Tech FT-5 Rafts: No Supports: No Resolution:…
I was tired of trying to thread the timing belt on the FT-5 carriage so I made a fix. This was remixed from my other designs. It should work with the other stock carriage parts but I would just download the other parts from my other…
RJ45 Breakout Mount for rewiring with CAT6 network cable. https://www.amazon.com/gp/product/B06XZ3BMTL/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: No Supports: No…
Had some bad luck gluing together this model so I remodeled it to one with a back with no glue used. Did some tweaking to the push rod also. Only needs supports in the countersunk bolt holes in the back cover. The main box has been modded…
Needed a way to charge my PowerBeats Pro and Apple Watch without having it take up room on the nightstand or on top of the laptop. So, with a few clicks on Fusion 360 I came up with this. A dock to do both and mount on the side of my…
Just an add-on to the iPhone 7 Plus for a Apple Watch like all the other cradles out there. https://www.amazon.com/gp/product/B07PXKBTQV/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Print Settings Printer Brand: SeeMeCNC Printer:…
NEW VERSION https://www.thingiverse.com/thing:3076209 This is my remix for the Folger Tech FT-5 and the Reprap Discount Full Graphics Control. Also, I made the base to fit the 2020 tubing. 3-4-17 Update:I added the firmware to activate…
Dual X 2 USB ports for the power supply cover.
This is a version of the Reprap Discount Full Graphics Mount for my Rostock Max V2. I had to use Marlin firmware over Repetier because if USB disconnect issues. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: No…
I have been trying to set up auto leveling on my Rostock V2 for about a year or so using an inductive sensor. Having no luck to date, I resided to give FSR's a go. Found DodgeDerek version and found after 4 or 5 sets that failed do to my…
Total redesign from scratch. Better layer cooling than ever. You'll need to find the right percentage RPM for your fan. At 100% of my high velocity 40mm fan, the hotend can't keep up. 50% to 70% is plenty of cooling! Print Settings…
I've been working on this for about 8 months. Finally got around to printing all the parts and putting it all together. Lots of tweaking and reprinting. Now I have it almost the best I can do. Still have a few things I would like to…
My FT-6 was having a Z axis skipping issue when Zhop was on so I switched to dual Z axis motors, updated the firmware to use E1 driver for the second Z motor. All is well now. Here are the tools I used. The clamp is for the bed so you…
This is a remix of my other mount to fit the Prometheus V2. https://www.distechautomation.com/ Print in ABS or better. NOTE: You'll need to calibrate the horizontal radius a bit. Had to move the mount for the ball ends out 5MM I think to…
This is a well needed fix for the Folger Tech FT-5 "Z" axis home switch. I was tired of trying to hold the little nyloc nuts so I modeled the switch clamp with nut holders. The "Z axis screw clamp" is sized to fit a 6-32 bolt tight so no…
This is a end stop mod for TK Ward's Core XY Kit. With it you can use Y axis stock switch and home in the same way it did with the stock FT5 setup. You will need to run the X axis switch wire with the other hotend wires. Small price to…
Yet another Dampener. The others seem to slide off center too much for me. So I made this one to keep that from happening. I made two versions because I didn't have enough T-nut's of one size or the other to get the job done. M3 and M4…
Layer fan for my Prometheus V2 mount on the FT-5. https://www.thingiverse.com/thing:2543862 Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: No Supports: No Resolution: .25 Infill: 25% Notes: Printed in ABS to hold up…
This is a bracket to hold the Universal Spool Holder by jjpowelly http://www.thingiverse.com/thing:943563 . It's designed for the 80MM rod size I'm using for Hatchbox filament and My NEW Folger Tech FT-5 on the top 2020 Bosch tubing. It…
Keeping track of all the remotes in the bedroom is a pain. Raise your hand if you've lost one. This is the first revision. I'm sure the wife will want a pocket for her glasses, phone and other things. The round holes I made for the 16 oz…
I found that the ProStruder gets very hot so I designed this cooler for my Rostock ProStruder Dual Mount ( https://www.thingiverse.com/thing:2626395 ). Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Supports: No…
This is an updated version of the FT-5 E3D Stock Bowden Mount V4. I've add a mount for an inductive senor. https://www.amazon.com/gp/product/B008FZC8F2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 Print Settings Printer Brand: SeeMeCNC…
This is a handle and frame for the opening on my Rostock Max V2 that I have built an enclosure for ( http://repables.com/r/447/ ) . I made some mods to the opening parts. No glue needed. Used small sheet metal screws .375 long to hold the…
This is a remix of my other design ProStruder Dual Cooler ( https://www.thingiverse.com/thing:2636707 ) for the FT-5 version of the ProStruder Dual Mount ( https://www.thingiverse.com/thing:2498096 ). Print Settings Printer Brand:…
The is for Dual ProStruder's on my Rostock Max V2. Just another design for my Prometheus System setup. It fits in the stock cutout on the top piece. You'll have to install the ProStruders after putting the top piece in place (wire to the…
This is a remix of my Prometheus mount ( https://www.thingiverse.com/thing:2543862 ) to also mount a inductive sensor. https://www.amazon.com/gp/product/B008FZC8F2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 Also see my other designs and…
This is a remix of my FT-5 E3D Bowden Mount V4 https://www.thingiverse.com/thing:2482082 for the Prometheus V2. Also Bowden. https://www.distechautomation.com/products/prometheus-v2 Print Settings Printer Brand: SeeMeCNC Printer: Rostock…
I'm using a Raspberry Pi to run KODI. I thought it would be fitting to have the logo on the case. Same instructions as the MY FAV PI ( raspberry pi 2/3 case ) by Tripnutz. You'll need to adjust the size a bit on the bottom print for a…
This is an RJ5 mount for my Rostock Max Prometheus V2 Effector ( https://www.thingiverse.com/thing:2294232 ). It's made for the duel RJ5 breakout board (…
Remix of my filament runout sensor mount to align with my ProStruder Dual mount ( https://www.thingiverse.com/thing:2498096 ). Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: No Supports: Yes Resolution: .25 Infill:…
This is an updated version of the FT-5 E3D Stock Bowden Mount V4. I've add a mount for an inductive senor. This is for a smaller inductive sensor. https://www.amazon.com/gp/product/B00979RA1M/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1…
Having some trouble with strong enough extruders on my FT-5 Chimera setup so I tried my ProStruder's from my Prometheus System that I received from there Kickstarter I was in on. I had to make a mount for them so I designed this. Here's…
This is a remix of paulhut's "Rostock Max V2 E3d Cyclops LED Light Effector Platform" http://www.thingiverse.com/thing:1614074 . I had to remix it to clear the duel head version by removing the mount for the IR height sensing board and…
Remix of the Rostock Max V2 Temp Plate with holes for M16 switches. http://www.thingiverse.com/thing:1547255 Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: .25 Infill: 30 Notes: Print with…
Made a change from my single RJ45 breakout ( https://www.thingiverse.com/thing:2351400 ) to a duel RJ45 breakout. Can be used with the other stock carriage parts but I recommend using my other design parts(…
Just had to have one for my Rostock running OctoPrint ! Special thanks to Clay for the vector graphic of the SeeMeCNC logo. If you break an eye off removing the print, just super glue it back on. I had to do one eye. Print Settings…
This is a replacement part for the top of a Rostock Max V2 to hold a Temperature Display I ordered from Amazon ( https://www.amazon.com/dp/B005VR0TK8/ref=cm_sw_r_sms_api_X7MlxbHENVPDJ ). The next version will include 2 holes for M16…
Used 6 x 6 magnets. You will need to glue them in place!! Mine fit tight. The 80mm light ring ( https://www.amazon.com/gp/product/B00K81B974/ref=oh_aui_detailpage_o04_s02?ie=UTF8&psc=1 ) also fit tight. may need to file the edges of…
To wszystkie aktualnie dostępne wyniki.
