Liczymy pasujące modele…
Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…
Flexi Articulating 4 Leaf Clover or Shamrock Keychain for St. Patrick's Day I wasn't a huge fan of the other flexi/articulating clover keychains I found on here, so I decided I would try to make my own. This is one of my first experiments…
I needed a way to hang my hats in my closet. Because of the way my closet is laid out, it needed to be vertical and not a long horizontal rack. I made these hat holders to go on the wall by the door (and one behind the door). Each section…
This fits around a 38mm or 1.5in roll cage or roll bar tube and holds a standard GoPro mount. It is designed .25mm small to allow for clamping force and has space for M4 hardware to fasten it. The standard GoPro mounting hardware will…
Just combined a few models into a little sign you could print to put by your keys or something. I added some small connectors to the pieces that would be detached from the rest once printed. After printing this once, it is Very delicate.…
I remixed the simple coffee cup, shelled it out, and added threads so that you could store things in it. My original idea was for my wife to put her makeup sponge in there to travel, but really anything would work. Interior dimensions are…
The adapter to put this LED bulb in my motorcycle broke, so I designed a replacement. It fits a 15mm LED bulb and has an area for a set screw. It adapts to an H9 or H11 headlight. You will also probably need an O-ring or to print a TPU…
Organizer / holder for 5 Piece 3/8 Drive Socket Extension Set Harbor Freight 67926 In my quest for Toolbox organization, my socket extensions were next. I designed this tray to hold the Harbor Freight 67926 3/8 drive impact extension set…
Designed to hold a stack of business cards to carry in your pocket or bag. I think this will print best upside down. Should be printed with a brim so it doesn't fall over.
I needed to clean the lint trap in my dryer so I made this vacuum attachment for my Shark brand lift-away vacuum to reach. It fits the Shark Lift-Away vacuums, or any vacuum that takes accessories with a 39.5mm OD. This attachment is…
Holder for Harbor Freight PITTSBURGH Universal Joint Socket Adapter 3-Piece Set After printing an organizer for my Harbor Freight socket adapter set, I decided to design this one next. Piece by piece I will be designing organizers for my…
Multiple people (including me) stated that they needed more clearance for the shaft bearing, or that they had added washers as spacers to get it to fit. This fixes that issue. I also removed the need for supports. Without my modification,…
Screwdriver Holder Rack for Toolbox Drawers Just a simple way to organize your screwdrivers. This is the next model in my quest for toolbox organization! This model is inspired a little bit by the Harbor Freight Screwdriver Rack (56655)…
I just thought I'd design a simple keychain with the MG brand octagon logo. You could also hang it on your tree as a Christmas ornament. Printed at 100% size it's 54mm. Edit 1/28/25: I added a version that you can print flat using my two…
Barbell Collar or Clamp for 50mm Olympic Barbell This is my take on a one piece print for a barbell collar/clamp. I have yet to print it, so it may need some tweaking. Should probably be made with PETG or ASA. If you are handy and have a…
Just a simple Tinkercad remix. I wanted a bevel on the end of the glue spreader, so I added one and made the handle rounded at the same time.
Spearfishing Speargun Reel The original model was super vague on assembly instructions and the mount didn’t fit my gun. You can’t resize it because then it wouldn’t mount to the rest of the reel. My mount uses just two zip ties and mounts…
Heart Shaped ChapCap Chapstick Keychain for Valentines Day As another entry into my ChapCap line (full line available here ), here we have a simple heart shaped keychain for holding your Chapstick. This would be great to attach to your…
Band-aid shaped Bandage Storage Box with Sliding Lid This is just a simple box shaped like a band-aid with a sliding lid to store your bandages in. It fits bandages 35mm x 105mm or so. There is a little extra length on the ends due to the…
Most race sanctioning bodies require clamps on the roll bar to keep the harness from sliding around. This fits around a 38mm or 1.5in roll cage tube to keep the belts in place. It is designed .25mm small to allow for clamping force and…
Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief I recently installed the Sherpa “Extra” Heavy extruder on my CoreXY Converted RigidBot Printer, but I needed a way to keep the cables nice and tidy and reduce strain on…
Mickey Mouse Ears ChapCap Chapstick Keychain This is another entry into my ChapCap Chapstick keychain series. This one looks like Mikey Ears for the Disney fans out there. This fits on a standard Chapstick, Blistex, or generic lip balm…
Cascade Wallet V2 With Lanyard or Keychain Loop My sister needed a holder for her children's Yoto cards. This is the same great Cascade Wallet V2 by @Hugo with the simple twist of adding a small hole to hang it on a lanyard without…
Pretty straight forward. I liked the CR Touch mount, but I had a BL Touch, so I flip flopped the holes to support the wire on the other side. Using it on my Aquila X2 and it works great.
Hair Clip Rack / Holder for Bathroom Cabinet My wife asked for a way to organize her hair clips in the bathroom. This simple model hangs easily on the inside of a cabinet door. I use command strips, but I put holes to mount with screws if…
I wanted to mount a 1" thick filter on the fan instead of a 2", so I remixed the design. I also cleaned up the F3D file a bit so that it resizes a little more cleanly. Within reason, you can enter your fan thickness and filter thickness…
Volkswagen VW Skoda Etc. Window Regulator Mounting Clip This replaces the little two piece plug that holds the window into the part that rides on the track. Yes, they're cheap, but I didn't want to wait to have one shipped. I already had…
Clamp on Windshield Phone Holder for MGB or MG Midget NOTE: PRINT THE GoPro VERSION. It's just better. Also, I completely re-invented this mount from the ground up and that version is available here . I needed a special mount to secure my…
I just wanted a pick shaped tray to hold all the guitar picks on my desk. Instead of starting from scratch, I created a slight mix of the picks I have been printing for playing bass.
Mickey and Minnie Ears and Bow (Large) I designed these for a friend to turn her daughter's Little Tikes Cozy Coupe car into a Minnie Mouse car. Some of the files are designed with screw holes to be mounted to a surface. You could also…
Ibanez Guitar Amp Knob All the knobs were breaking on my Ibanez acoustic amp so I designed this simple replacement. Although it was designed for an Ibanez amp, it would fit any amp with a 6mm shaft that is 4.5mm to the flat of the “D”.…
Simple peace hand ring holder with dish. Thanks to Prusa's organic supports printing this is completely possible! I took a peace sign off of Thingiverse and added a dish below it. I was working through how to add some support material…
Replacement Center Cap for VTO Wheels (Minilite, Watanabe) I didn't like how shiny the stock center caps were on my black VTO wheels, so I decided to model one up in Fusion 360 to replace them. This cap is modeled off of the VTO center…
CoreXY Conversion for RigidBot 3D Printer If you still have a RigidBot 3D Printer (first of all… WHY??) here is a great way to modernize it a bit by converting it to CoreXY. Many of Luke's parts have been converted to use M3 heat inserts…
Parametric M6 and M8 Cymbal Nuts for Drum Set This is just a simple cymbal nut for a drum set. I have included versions for a captive M6 and M8 nut, but I have also included the parametric fusion file in case you need a taller or shorter…
This is reminiscent of some old molecule building set that my mom had when I was growing up. I am including the Fusion 360 files in case you wanted to scale them up or down (currently pegs are 5mm). I have added parameters for the peg and…
Drum Microphone Clip for Snare or Tom Mic This is a 3D printed version of a pretty common clip design to attach a mic to a snare or tom. Uses a screw mount (not included) to mount the mic and has a clip to hold the cable. Printing:…
Weight Keeper for Scuba or Freediving Weight Belt I recreated this weight keeper to closely match the ones from Hog or Edge. I know they only cost around a dollar a piece, but for a few cents worth of plastic, you can also save a trip to…
Nightstand Tray for Wallet and EDC Knife A simple model to solve a simple problem. My knife was leaving scuffs on my white nightstand so I designed and printed this simple tray to hold it and my wallet. It could obviously be used for…
In this remix, I removed the divot for the magnet and added a 10x10x2mm slot in the middle for a magnet to be dropped in during printing. Please use the attached step file if you need to change the size of the slot for the magnet. The…
Philips Norelco Trimmer Organizer for MG7900 MG7910 I just needed a place to store and organize my Philips trimmer and all the accessories. This print holds the trimmer itself and all of the guards and extra pieces. I'm also including the…
Marker Holder to Color Filament for Petamentor2 or other PET Bottle Pulltrusion Recycler This is for all you PET bottle recyclers out there! I wanted to have a simple way to color the PET strip without having to scribble all over the…
DJ Reference Camelot Wheel for Mixing Keys "This is the Camelot Wheel. Each musical key is represented by a number and letter combination. The outer ring has Major Chords, while the inner ring shows Minor Chords. The Camelot Wheel system…
This is simply a rounded or domed center cap with the VW logo. Measure your existing center cap and scale accordingly, or add as a logo to your full center cap 3D design.
Belt Rack Holder for Wire Closet Shelf My belts were taking up an entire drawer and I needed a better way to organize them, so I designed this belt hanger rack. This hanger hooks onto a standard wire closet rack (with 1"/25mm spacing).…
Cute Pumpkin ChapCap Chapstick Holder Keychain for Halloween or Trick-or-treat Just in time for spooky season, I created this cute little pumpkin cap for regular Chapstick tubes and Carmex tubes! The ChapCap version should fit Blistex,…
I needed a box to store the 5 piece router bit set that I bought from Harbor Freight so I remixed a model and made this box. Should fit all the bits nicely, although I was a bit generous with the clearance for the shanks I think (8mm for…
My fiancé Loves shells, so I designed this ring holder and dish for her to use to keep her rings when she is not wearing them. I tried to design it without the need for much support material, but any that your slicer adds under the shell…
MG Logo Center Cap for VTO Wheels Simple center cap for VTO wheels with the MG logo on it (for multi-color printing). I got a fresh set of VTO wheels for my MGB and they came with bright chrome center caps. Since the wheels I got were…
Creality or SKR Mini E3 With Raspberry Pi Electronics Case Houses a Creality or SKR Mini E3 mainboard with a Raspberry Pi (3B) with a buck connector and also has a slot for a stepper splitter for dual Z if you need it. The case also holds…
Refrigerator Drawer Divider for LG Fridge Beverage Drawer Since the LG fridge only ships with one divider for the beverage drawer, the draw fits four, and they won't sell you any more, Davoxt saved the day with his model! (go show him…
I needed a little more width in the nose area so I added it in F360. If you have a nose that is wider than 12mm at the bridge, you're going to want this remix. I added just a little bit of a chamfer as well both for effect and for coming…
12V Motor Speed Controller Mount for Petamentor2 I wasn’t using the bottle cutter, so I needed a different way to mount the speed controller part. Since I was already using the original model to mount my on/off toggle switch, I remixed it…
TV or Monitor Web Cam Mount with Ball and Socket Links The angle of the web cam in the conference room where I work was too low, so I remixed a ball and socket mount and designed this mount for hanging a webcam off the bottom of the TV.…
This lid is designed to go on a mason jar and allows for a spinning disk to close the opening. It wouldn't be water tight, but should keep anything the size of rice or bigger inside. If you line it up on the build plate, it can be printed…
Taylor Swift Red Bedazzled Version Twist-and-Lock Microphone Toy Mic Prop I really like the original microphone model from FlyAttack , but I wanted something Taylor Swift themed for a friend's daughter's birthday party. I printed in…
Triumph Logo Center Cap for VTO Wheels Simple center cap for VTO wheels with the Triumph logo on it (for multi-color printing). I got a fresh set of VTO wheels for my MGB and they came with bright chrome center caps. Since the wheels I…
Super Spooky Dripping Blood Business Card Holder for Desk I was thinking about what spooky thing I could contribute to this year's Halloween contest and I thought “What's spookier than blood?” This bloody business card holder is designed…
The original model was the best pair of glasses that I had downloaded and printed. All other versions were flimsy and the attachment points broke as soon as I tried to assemble them. This one snaps together without any extra pieces, no…
3010 to 4010 Blower Fan Adapter My V0.2 kit came with 3010 blower fans for the Mini Stealthburner toolhead, but I built mine with a Dragonburner so I had no need for the 3010 fans. This little box allows you to use those 3010 fans in…
Audi or Volkswagen Roof Rack Mount This model fits around the odd shape of the Audi (and possibly VW) roof rack bars. It uses two M5 heat inserts and screws to attach to the roof rack, and another insert on top to mount whatever you want.…
Silverware Holder for Dish Drying Rack This model was fun to design and print, so let's take a look! I needed to print a replacement silverware holder for a dish drying rack because the original was literally crumbling. The replacement…
This is a replacement for the plastic cap that protects the Mares MR12 Scuba Regulator 1st Stage. Mine broke due to age and I didn't want to leave it exposed. I printed it first in PLA, but hope to print it soon in something with a…
I needed some knobs for the cabinets in my garage and that's where my MG is, so I designed this simple handle in Fusion really quick. It's designed to accept an M5 screw since that what fits my doors, but feel free to resize the hole, or…
Flush Mount Panel Tab for Printer Enclosure or Back of Picture Frame I know this model is simple, and takes zero time to whip up in a CAD program, but not everyone on here has access to a CAD program, or the skills to use it yet. I…
Parametric TPU Hole Plug for Sheet Metal or Plastic This is just a simple plug that can be adjusted to fit any round hole in sheet metal or plastic. I needed to fill a few holes in the sheet metal of my classic car that I'm restoring, so…
Motorcycle Shift Lever Cover - Shifter Cover - Shoe Saver I ride motorcycle daily to work, weather permitting. I am sick of my shifter putting marks on my shoes! I purchased a shifter cover online, but when I got it, it didn't fit my…
Internal Pipe Sander for Sandpaper Strips I needed to clean the inside of a part for my MGB restoration so instead of purchasing the tool, I of course designed it and printed one out. It's pretty simple, but works well. Uses two strips of…
Cabinet Ziploc Bag Box Holder for Large Box of Sandwich Bags I needed something to mount a large box of ziploc bags out of the way under my cabinet since the box was too big to fit in a drawer. This model was originally designed for the…
Dragonburner Toolhead Shroud for MadMax Toolchanger (Left and Right) I wanted to use the standard Dragonburner toolhead on my attempt at a MadMax toolchanger, so I remixed Chirpy's V8 of the Dragonburner toolhead to include the holes for…
ChapCap Easter Egg Keychain for Chapstick A new entry in my ChapCap collection is this Easter Egg shaped Chapstick holder keychain. Print it in one color, print it with color changes, or do what I did and use up a bunch of little filament…
Losi NASCAR RC Car Alignment Jig I designed this simple model for a friend to align his Losi RC car's adjustable suspension. These jigs replace the wheels and allow for adjustments to the suspension while measuring for toe with a ruler…
MGB Rear License Plate Mount Frame Mounts a US license plate on the back of an MGB. I lost the license plate mount for my 1972 MGB so I designed this simple mounting solution. It only mounts the top of the plate; the bottom is in free…
Vase Mode Pickle Pot for Cucumbers I wanted pots to tell my cucumber plants from my red pepper plants so I made this pot and my Pepper Pot ! Print in vase mode with thick walls. That's pretty much it!
Sheet Metal Press Die for Firewall AC or Heater Lines - Classic Auto Air This model was designed very specific for its purpose, but I have had a few people ask me for it, so here it is! I also did my best to make it parametric so you…
Parametric Keyboard Keys Desk Nametag with Business Card Holder This parametric model makes a nametag for your desk using keyboard letters as the letters. In order to make this work, you will need a way to accurately measure the base of…
Bell Pepper Pot - Vase Mode I wanted a pot that looked kind of like a bell pepper to put my bell pepper plants in so that I could tell them apart from my other plants. I made this to be a simple vase mode planter print, although that does…
Parametric Drum Throne Stool or Cymbal Stand TPU Foot If you're a drummer, you know that you are always losing or cracking the feet on the bottom of your drum throne and cymbal stands. This mildly parametric model (you'll have to mess…
Flush 2 Color, 1 Extruder Ornamental Sugar Skull Keychain I really love sugar skulls and this model from @themakerchemists was too good to pass up! I split the model in half and worked it into my 2 Colors 1 Extruder method. The files are…
2 Color Keychains with 1 Extruder Allows printing two (or more) color keychains with a single extruder. This model and method allows you to print a multi color, but still flat, keychain with a single extruder. The trick here is breaking…
Pepperoni Pizza Keychain (Multi Color, Single Extruder) Up next in my multi color, single extruder series is a pizza keychain. Print one as a keychain or two as earrings or make it bigger for a christmas ornament. Have fun with it! If you…
Flower Bouquet Sign or Tag Use this model to add a sentimental message to a bouquet of flowers! The tag is 75mm x 50mm and prints super fast, just add the text in the slicer and a color change at the right height. The post is printed…
Parametric Cord Winder Hooks for Floor Lamp I got sick of looking at the pile of cord next to the floor lamp in my office, so I designed this simple print to organize it. I designed this to be in two pieces to avoid the need for any…
Outside Glass Shower Suction Cup Phone Holder My wife likes to watch her TV shows while she's in the shower. After a long time of watching her prop her phone precariously outside the shower on a ledge, I designed this simple holder that…
Protective TPU caps for Gadmek's bike stand I printed Gadmek's bike stand, but thought it could use a little something to keep it from sliding on the floor so I designed these simple TPU caps to be printed and slid over the feet of the…
RigidBot Extruder to Orbiter V2.0 or GALILEO 2 adapter Allows mounting a RigidBot Neema 17 extruder to Orbiter V2 or Galileo 2 mounting holes. This may be something that only I have use for, but just in case someone else has one of these…
Nothing crazy, but I lost one of the plugs that covers the holes in the MGB’s body for filling the rear shock reservoirs. I have a parametric model that allows me to adjust the hole size and metal thickness, so this model is adjusted to…
8" Planter Pot With Built In Moss Tower for Climbing Plants A friend asked if I could make him a planter with a moss tower for his Monstera plant. I designed this based on an example he had seen. It is designed to print with no supports…
Dragon Burner Toolhead Parts for MadMax Toolchanger A collection of parts for dragon Burner toolheads being used in MadMax toolchangers. I've included the parts that I've been working on to help convert my RigidBot CoreXY to a MadMax…
RigidBot Filament Sensor Mount This model mounts a cheap Aliexpress filament sensor like this on the RigidBot frame. This is a part of my RigidBot CoreXY conversion as well, but I thought it could be useful by itself in case you want to…
Improved Anti-Warp Tabs Add these tabs to the sides and/or corners of your 3D prints to help avoid warping. These work better than mouse ears or a traditional brim to hold the edges of your print to the build plate. To use these tabs,…
Frigidaire Dishwasher Wheel for Upper Rack One of the wheels on our Frigidaire dishwasher wore down to the point that it fell out of the track. This simple model replaces that wheel. This was designed for model LFID2426TF2A, but may fit…
Snap On Toolbox Drawer Labels - Huskey, Signet, Etc. I loved Jonathan Levi 's ( The Next Layer ) snap on drawer label design, but I don't have a laser, and I know a lot of you don't either. This version allows for a printed label to be…
Shop Vac Beater Brush Bar Adapter for Cleaning Cars I needed a way to clean dog hair out of my car and the standard shop vac brush wasn't cutting it. This model enables mounting a mini beater bar or brush like this one from Amazon (the…
MGB Heater and Defrost Knob for 1971-1976 One of the knobs on my MGB stripped out and would no longer turn the control. I designed this knob based off of the original and it mounts and releases in exactly the same way. Printing: I don't…
To wszystkie aktualnie dostępne wyniki.
