4255 modeli
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale I wanted the Lego Bicorne for my skeleton. Did not have the skills to make it myself. So after a long time trying to make it,…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
Wydruk około 1,71 €–2,10 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Wydruk około 7,00 €–8,56 € nettoWstępna wycena jednego wariantu
Replacement part for an old playmobil castle draw bridge winch. Playmobil part number is 3060354. Prints fast and easy, I used PETG for a litte flexibility. Other filament should work as well, though. --- Ersatzteil für die Zugbrücke der…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Martin is the king of Stargate models. Since Martin's model was uploaded, the PrusaSlicer added the ability to paint MMU colors directly onto models. As such, I went ahead and remixed his excellent model and painted a few of the model…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.). An optional cable guide for the pi-cam cable. No screws needed. Everything snaps together.. There are holes to attach the Raspberry to the bottom part using…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed an almost identical spare wheel for the rear of my Makita cordless lawn mower - more stable than the original because the soft struts are no longer needed! The original hubcap can still be used. A further improvement in driving…
Wydruk około 10,81 €–13,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Wydruk około 5,90 €–7,21 € nettoWstępna wycena jednego wariantu
These parts enable mounting the Articulating Raspberry Pi Camera Mount on the base extrusions of the i3 MK3. Just print with default settings without any supports. I like to use a 0.15mm or lower layer height for better definition of the…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
I designed a servo saver for Tamiya Neo Fighter DT 03 Buggy. The design is different from the original Tamiya piece. I incorporated the 3 pieces of the steering servo into one piece to make changing them easier. The servo saver will break…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Feeling nostalgic about Microsoft Office from early 2000s? Download and print this keychains for you or give to your coworker, friends and family! Info: Microsoft Office 2000 (version 9.0) is a release of Microsoft Office, an office suite…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
I remixed the battery cover from another remote control to fit on the model BN59-01303A. It is a little bit too thick and it fits a bit tightly, but then you will not loose it easily ;) It prints best standing with brim.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
I recommend you print left and right part, even if you need only one replacement. Reason is that these parts are not 100% same size as originals. If you leave one original part, keyboard might not be levelled. Print settings: 0,1 or 0,12…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the tail or feet.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
The third tree model that I have created for this holiday season! This year I wanted to decorate the house with winter themed 3D prints! I will be doing multiple different tree designs throughout the winter. Happy Holidays!
Wydruk około 4,39 €–5,36 € nettoWstępna wycena jednego wariantu
Lithium-ion Safety Concerns: If you do not know what your are doing or you do not have any experience about these batteries, do not play with them. They can store lot of energy, which can hurt you seriously and you can burn down your…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple adapter ring to fit CR2032 batteries inside of CR2430 battery devices. Simply push the battery inside the ring (snug fit) and place it inside whatever device you want to use it in. Both batteries are 3V so there should be no…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Robert Sugar Bowl 01 mit zwei unterschiedlichen Wandstärken. Sugar Bowl 01 with two different wall thicknesses. Auf den Bildern ist die Variante mit den dünneren Wänden. The pictures show the version with the thinner walls. Support (Tree)…
Wydruk około 11,85 €–14,48 € nettoWstępna wycena jednego wariantu
I designed some shock absorber spacers for tamiya dt-03 chassis Neo Fighter They are used to use the maximum spring compression with the original shock absorbers. I noticed that the springs had little compression even with the stock…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updated version of CV cage after it broke by my kids. Stiffer model / more material / higher tolerances / works fine I recommend add some grease anyhow… Have fun
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Repairs Elko L3033 light button by adding additional structure inside of existing button. It will look exactly the same as original part, but will function much better and last longer. Print part from ABS or ASA because it needs to handle…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
CR2025 and CR2032 box
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
I designed additional protection for the chassis of my Tamiya Neo Fighter buggy. While doing some jumping around I noticed that the rear part was ruining and with it the screws too. With this additional protection the rear frame and…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is USB charger for a Panasonic Screw Driver EY503 (or similar) battery, when it is converted from Ni-CD or Ni-MH 2.4V to lithium-ion 3.7V. Do not use to charge original 2.4V battery! Here is how to convert a battery for this tool. I…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Hammerkopfmutter T-Nut Mutter mit M4 Gewinde für 30x30 Aluminumprofile Nut / Slot / Series / U 6
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This is an additional test of "crush ribs" which I learned about from this video from this video : See also : https://www.prusaprinters.org/prints/43586-test-print-crush-ribs-version-01 and…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
The storage box with an openable sliding lid is for the Makita LD030P laser distance meter; it has a lower compartment for the batteries.
Wydruk około 5,09 €–6,22 € nettoWstępna wycena jednego wariantu
This model is a replacement part for the Arrma Vorteks Body posts, includes Fusion 360 models and sliced gcode for CoreOne and Mk3S. AR320357
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple bookmarks inspired by my favorite anime, Cowboy Bebop. The print is quite simple, with a combination of top and bottom layer in a transparent filament and a colorful filament in the middle. The top hole for any kind of attachments…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Simple Two-part Filament Holder for 3D printer frames made of aluminium 3030 profile Needed : 2x M6 screw 2x M6 T-block sauate nut for 3030 profile M8 Threaded rod 2x M8 nut
Wydruk około 5,84 €–7,13 € nettoWstępna wycena jednego wariantu
Antivibration feet for MK3x printers and other printers using 3030 profiles. Needed for assembly: 1x M3x18 1x 3030 M3 T slot sliding nut 1x Sqash ball
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Simple Lipo / Lihv spacer for Tamiya DT-03 Neo fighter. It was designed for for a 20mm thickness battery.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
BMW 503 1956-1959 Coupe
Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu
material PETG
Wydruk około 48,50 €–59,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ IMPORTANT in order for this part to fit, you have to scale it from 100% to 10 % ] This is a spare part for upper basket rear stop, which you can use instead original part, it's cheaper and faster to print, PLA under a dishwasher…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was quite surprised how few of this 120 degrees connectors is available to download, for 3030 it was none, so here one is :) I printed it from pla (as i think it is not that bendable as petg), 0,25 structural, 5 perimeters 5 top and…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Motivation [ clip system 16mm aluminium tubes ] In the Ally folding canoes, 16mm aluminium tubes are held in place by clips. These clips somehow seem to be difficult to buy at the moment, so I decided to design a 3D-printable model for…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with PLA and PETG - 50% infill, both work perfect. Best use organic supports only on table.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kleine und große Schale am besten aus PLA drucken, da das gut aufeinander gleitet. Etwas Silikonspray (Blattglanz) hilft auch gewaltig. Um die Innenschale dann etwas Nachrüst- Fensterdichtung kleben und in die Außenschale quetschen.…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
EN: To indicate temperature or function associated with temperature (for example, temperature indication, temperature monitoring points). DE: Zur Angabe der Temperatur oder Funktion im Zusammenhang mit der Temperatur (z. B.…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Drawer for AB6H-030x090LZZ1-LZZ2. .f3d file provided for text change and dimension adjustment. Revision - Q03
Wydruk około 4,10 €–5,02 € nettoWstępna wycena jednego wariantu
A simple mount for the Husky brand air compressor filter HDA70403AV. Attach to the filter with an M4x8 bolt and then to your surface with whatever length M4 hardware you need. I printed mine with 4 perimeters, 50% infill, 0.25 structural…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
J'ai donc souhaité avoir des connecteurs magnétiques sur le modèle train de Noël icône 10361 qui en était malheureusement dépourvu. J'ai fait un modèle simple, efficace, et rapide à imprimer. L'impression s'effectue avec un remplissage de…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: To identify a water pump. DE: Zur Kennzeichnung einer Wasserpumpe.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
VW Sharan I front seats railing replacement spacers / sliders. Modeled them as close to the original as possible, however I found that they are a tad too loose. They work great, there is just a little more play, you may consider printing…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My large Samsonite luggage has hinges made out of some kind of rubber, that both failed (see pictures) The replacement used elasticity of PETG to replace it. Print 1 hinge, 2 feet per hinge you need to replace. Printing The feet should be…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not necessarily to be printed, but used when designing projects in CAD. STL, OBJ, F3D and STEP files included. New 2020-R Extrusion! Please don't forget to like the model if you find it useful. Thanks!
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at…
Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
HELLO I present to you the articulated snake 003 a snake with a scale style ideal for decorating your desk here you will find two files an STL and a 3mf for multicolour printing (For personal, non-commercial use only. See copyright.)…
This T-nut for 3030 extrusions doesn't require a hex nut or brass insert, as the bolt is screwed directly into the plastic. T-nuts for classic hex nuts often have the problem that they are weakened by the thinner plastic or one often…
Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
This is my model of the Prometheus from the Stargate SG1. Once again the model is done completely by me, it is a kit where you should not need any glue (except for repair maybe). The assembly is much simpler then the 304, but still, I…
Holder for a CR2032 coin cell batteries. Battery is securely held in place Single (3V), double (6V) and triple (9V) versions Designed for use with breadboard jumper/dupont wires or bare wire Total holder thickness is 7.3mm for the single…
This design of a M6 nut tries to follow the standards of ISO4032 and DIN934 as closely as possible. The thread is designed to fit to a M6 screw with exactly the same mechanical play as a metal M6 nut (when printed in PETG on a Prusa i3…
Models you can use to represent M4 nuts. Varying levels of detail, not intended to be used as 3d printed objects. These models follow the specifications of ISO 4032 Style 1, the standard for the most common type of metric nut. Max, Min,…
Pokemon - cookie cutter set 003 The file is about 60 mm tall and can cut up to 8 mm dough and can be printed with a 0,4 mm nozel and 0,2 layer height. Its a 2 piece item, one for cutting the cookie dough and one for modeling . Best to…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
A simple stand to display any of the 3 versions of the Lego Back to the Future DeLorean. I printed the stand with PETG to prevent sagging over time. PLA might do fine as well.
Für alle deutschen Nutzer habe ich hier noch ein Video gemacht, wie ich einen Unterbau für meinen neuen 3D Drucker erstellt und gebaut habe. Vielelicht inspiriert es ja den ein oder anderen. For all english users, the following youtube…
I recently did some cable management on a RatRig V-Core 3 and found myself in search for a minimalistic solution to keep cables within common 3030 profiles. There were no models to my liking so I designed one. Consider exporting your own…
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
Models you can use to represent M3 nuts. Varying levels of detail, not intended to be used as 3d printed objects. These models follow the specifications of ISO 4032 Style 1, the standard for the most common type of metric nut. Max, Min,…
Very simple alignment gauge for mounting an MGN12 on a 2020 or 3030 extrusion. Will work on any 20mm or 30mm T slot extrusion face. Put the linear rail on the extrusion with bolts fitted, place a few of these over the rail / extrusion and…
Drill guide that can be securely fastened to 2020/3030 aluminum profiles. Durability is enhanced by using metal pipes together. The STL files are designed for 5mm and 7mm drill holes , but the hole sizes can be customized by using the…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
I've designed this drybox for the Prusa XL, of course it can be attached anywhere on 3030 aluminum extrusions. The drybox is opened via the red wheel with a 90° turn. It also holds the container for the desiccant, which could not be…
M5 T-Nut 30x30mm Aluminium Extrusion Profiles. Apparently those are hard to find where I live. Not a single store in my town sells those things. I bet you are asking “But can't you just order them online?”. Well I could, but then I'll…
8mm Lead Screw Grease Applicator for Super Lube 21030 A practical grease applicator for lubricating 8mm lead screws directly from a Super Lube 21030 tube (85g / 3oz PTFE grease) . The adapter screws onto the grease tube and allows you to…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Fully printable T-nut for 3030 aluminum extrusions such as those found on the Prusa Mk3/Mk3S. Available in M3, M4, and M5 printed-in threads. Can handle light duty work as long as you're not hamfisted and over-tighten it. I've used these…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
2020 / 3030 / 4040 T-Slot Framing Structural Brackets Ideal for use in 3D printers, CNC machines, laser cutters, enclosures, and other DIY frame structures. Suitable for: 2020 3030 4040 All our designs are free to download and use—because…
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
Models you can use to represent M10 nuts. Varying levels of detail, not intended to be used as 3d printed objects. These models follow the specifications of ISO 4032 Style 1, the standard for the most common type of metric nut. Max, Min,…
This is my Mark II X-303 Prometheus from the show Stargate. The model is improved version of my original model and this time comes with several features. It has one hangar bay open and in it, there is an F-302. It has retractable landing…
