Wyniki wyszukiwania: 10g

Sortowanie

Liczymy pasujące modele…

P
PrintablesMartinRowan

Dell QLogic 57810S Dual Port 10Gbps SFP+ Card Low Profile Bracket

A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…

Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu

Pobrania
231
Polubienia
10
Ocena
0
P
PrintablesThijs

Bracket Lenovo M720q 10G PCI-E NIC X710-DA2 Dual SFP+

Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q. The bracket has: Small slots for the LEDs are included. Holes for M3-inserts. Aditional holes for ventilation. Recess for USB cable. It is printed with the outside facing side…

Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
0
Ocena
0

Lightweight Boomerang V2 (6-Winged) – Under 10g, 30+ Min Flight and center hole

3 winged boomerang 4 winged boomerang 5 winged boomerang

Pobrania
1347
Polubienia
243
Ocena
3,5

Lightweight Boomerang V1 (3-Winged) – Under 10g, 30+ Min Flight

2 winged version 4 winged version this is 5 winged version 6 winged version

Pobrania
1303
Polubienia
229
Ocena
5
P
PrintablesBrit3r Makes

K-Pop Demon Hunters “Huntrix” Keychain <10g

Carry a little piece of your fandom with you everywhere! This Huntrix keychain is inspired by the K-Pop Demon Hunters universe and designed with fans in mind. Compact and durable, it’s perfect for clipping onto bags, keys, or lanyards.…

Pobrania
675
Polubienia
90
Ocena
5
P
PrintablesDouglas Hale

HORACO 8 Port 2.5GbE and 10GbE Ethernet Switch rack mount bracket -Mokerlink Sodola Nicgiga

Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…

Pobrania
346
Polubienia
32
Ocena
0
P
PrintablesRackron

Universal/Dishwasher Detergent Scoop - 10g

Problem: Recently our dishes coming out of the dishwasher started tasting like our dishwasher detergent. First we were using pods, even after switching to a different solid detergent in powder form after a couple of rinses we had the same…

Pobrania
290
Polubienia
20
Ocena
4,5
P
Printablesejpman

Shotgun Chamber Safety Flags (10ga, 12ga, 16ga, 20ga, 28ga, .410)

These are 3D-printable shotgun chamber flags that fit directly into the chamber and stick a big bright plate out the side so it’s obvious the gun is clear and unloaded. I’ve included models for: 10 gauge 12 gauge 16 gauge 20 gauge 28…

Pobrania
277
Polubienia
23
Ocena
5
P
Printablesad3m3r5

Ubiquiti Unifi PoE++ 10G Injector 1U Rack Mount (U-PoE++) - 19-inch and 10-inch

1U rack mount for for the Unifi PoE++ 10G injector. The 19-inch version comes in two halves, which allows 1-6 injectors per rack unit. The 10-inch version is a singular piece, which allows for 1-3 injectors per rack unit. There are also…

Pobrania
267
Polubienia
32
Ocena
4,5
P
PrintablesMeyui

10G Coffee Scoop

The scoop is easy to print and amazing to hold, which is a great helper for every coffee lover. It holds approximately 10 grams of coffee beans (when full). A hanging hole has been added to the scoop for hook storage. Files are available…

Pobrania
211
Polubienia
52
Ocena
0
P
PrintablesBill Ruehl

Wago 221-61x 10GA 30A surface mount clip wide version

A wider version of my previous remix. Looking for a bit more stability for the wider WAGO 221-61x units. All credit to the creator! These work great on the 10GA 30A WAGO units. I did mine in PLA with 3 perimeter walls and 20% fill (which…

Pobrania
209
Polubienia
29
Ocena
5
P
Printablessdbarker

Intel X-520 10Gbe PCI-E Card Full Height Bracket

2026-06-22 Edit: Added an offset relief hexagon version with a 21 mm offset to account for a PCI-E riser. Thanks @ichigio for the request! 2026-01-14 Edit: Added a middle ground, with relief hexagons. 2025-09-19 Edit: Added a solid…

Pobrania
199
Polubienia
17
Ocena
5
P
PrintablesPileOPaul

MokerLink 2G080110GSM 10 Inch Rack Mount

— — — Edit 11.06.25 Added CAD files — — — I couldn’t find a 10-inch rackmount that fit my MokerLink 2G080110GSM switch—so I designed one myself! The switch slides in from the back and is held securely in place by built-in hooks,…

Pobrania
198
Polubienia
19
Ocena
5
P
Printablesgexgecko

Woodworking Metric 'T' Scriber for easy drilling and cutting offset lines (only 10g filament!)

This Metric T-scriber allows you to draw a parallel line to a workpiece for drilling or cutting distances from an edge. cm on long axis, mm on short axis Usage: 1. Align the edge with the workpiece, text up 2. Insert a pencil into the…

Pobrania
193
Polubienia
47
Ocena
5
P
PrintablesGBdesigner

Test soportes (solo 10g)

Test para configurar y testear los soportes. Relleno:5%

Pobrania
185
Polubienia
6
Ocena
5
P
Printablesrmblr

Lenovo M720q baffle for Melanox CX312A and Melanox CX322A 10GbE SFP+ NIC

This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…

Pobrania
184
Polubienia
26
Ocena
5
P
Printableswhitespring

10GE NICGIGA 10 Inch Rack Mount

Matching rack ears for 10 inch racks 20% infill, 5 perimeters

Pobrania
166
Polubienia
13
Ocena
5
P
PrintablesRaid Owl

Beelink ME Mini w/ 10G and Sata

Adding 10G and Sata functionality to the Beelink ME Mini

Pobrania
164
Polubienia
19
Ocena
0
P
PrintablesBoA

Intel x520-T2 10gig NIC 4010 fan shroud

Shroud for mounting 4010 cooling fan. Use M3 heat inserts.

Pobrania
154
Polubienia
16
Ocena
5
P
PrintablesSpera

10g protein scoop

10g scoop for protein (volume of 25cm^2)

Pobrania
144
Polubienia
6
Ocena
5
P
PrintablesBill Ruehl

Wago 221-61x 10GA 30A surface mount clip

I was really happy someone created a solution for the larger 221-61x version of the Wago. I did a remix that allows it to be surface mounted. Hats off to the originator, his geometry is right on. I just chopped off the DIN clips and added…

Pobrania
141
Polubienia
17
Ocena
0
P
Printablessneaky909

Asus 10G PCI-E Network Card (xg-c100c) Low Profile Bracket

This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket. Feel free to reach out if this model…

Pobrania
140
Polubienia
3
Ocena
0
P
PrintablesEmil

110g gas canister stand

This is a gas canister stand for your canister stove. It doubles as a cap for the canister to protect it from dirt and grime. It's very low profile and will likely fit in anything that will fit the canister itself. I can put the canister…

Pobrania
133
Polubienia
25
Ocena
4,5

Lightweight Boomerang V3 – Under 10g, 30+ Min Flight

if no model is here yet then i didn't make it

Pobrania
124
Polubienia
11
Ocena
4
P
PrintablesTan Wei

SFP+ 10G DAC Connector Cover

Sharing a simple custom-designed SFP+ DAC Connector Cover for all the fellow network/home-lab-savvy forumers here. This cover is perfect for lazy individuals (like me) who do not want to unplug their cables but keep them protected and…

Pobrania
123
Polubienia
13
Ocena
5
P
PrintablesStelzenbach

Ultralight Glue Mixing Pad/Tray with Spatula, from 3g to 10g

Ideal for filament scraps 55x45 mm; 3.6g 75x 60 mm; 6.6g 95x75 mm; 10g Have fun printing and thanks in advance for your makes, likes, and feedback.

Pobrania
121
Polubienia
26
Ocena
4
P
PrintablesMateusz Tokarz

Ultralight Funnel (10g) | Fast Print + Ribbed

BOM: Printed with ROSA3D High Speed PLA Gray Need a funnel right now? This model is designed to be as efficient as possible. Weighing in at only ~10 grams of filament, it prints incredibly fast while remaining sturdy enough for everyday…

Pobrania
118
Polubienia
22
Ocena
5
P
Printablesoomaxoo7

Creatine Travel Organizer – Storage Container for 8-10g - Pill/Supplement Container

No excuses—always get your creatine in! This heavy-duty container keeps your supps locked in. A compact creatine travel organizer that holds exactly 8-10 grams when filled completely (tested)—so you can skip the scale on the go! Designed…

Pobrania
109
Polubienia
18
Ocena
0

Intel 10GbE X540 NIC Cooler Fan Shroud - Single Slot Low Profile - WIP

This model allows for the active cooling of most varieties of X540 10GbE NICs, including a modified model that works better on some of the actively cooled units that are more prone to fan failure. It positively engages with the metal rail…

Pobrania
108
Polubienia
20
Ocena
4
P
PrintablesLukass
Pobrania
108
Polubienia
20
Ocena
5
P
Printableskukulin

HORACO 8 port 2.5G +1 10GSFP managed switch rack mount for Modular 1U Relay Rack Mount

I made this remix to add 2.5g switch to rack together with my old TPlink switch. the switch model i have: https://www.aliexpress.com/item/1005005943823096.html left side is printed from original model here:…

Pobrania
108
Polubienia
12
Ocena
0
P
PrintablesThomas

Nokia ONT G-010G-R 19" Mount

The Nokia ONT G-010G-R supplied with my fibre optic connection should be screwed into the 19’ rack. I designed a corresponding housing for this, which fulfils its purpose.

Pobrania
104
Polubienia
10
Ocena
4
P
PrintablesWanschi

Sunlu New Spool Weight - 210g

Hier ein Spoolen Gewicht für die neuen Sunlu-Filament Rollen. Kann man mit 5x AA und 1x AAA Battarien bestücken. Gedruckt aus PETG mit 2 Wand und je 5 Ober- und Unterschichten. Gewicht mit Battarien ca. 210g

Pobrania
104
Polubienia
8
Ocena
0
P

invisible Apple Magic Keyboard & Trackpad clip-on Ergonomic Riser (only 10g!)

Summary Here you will find a slim, elegant, and ergonomic stand / riser for your Apple Magic Keyboard & Trackpad. The slight elevation at the back ensures fatigue-free typing during use. Optimized for fast print, less material consumption…

Pobrania
101
Polubienia
7
Ocena
0
P
PrintablesParksPrinter

Fender Frontman 10G Guitar Amplifier

Modeled after the Fender Frontman guitar speaker

Pobrania
99
Polubienia
12
Ocena
0
P
Printablespldemon

Intel/Inspur X540-T2 10G Dual RJ45 Fan Holder

Holder for a fan that can be used together with an Intel X540-T2 10G network card. These cards are also sold under the brand "Inspur" and heat up quite quickly during normal operation. The temperature reaches values that can even damage…

Pobrania
95
Polubienia
7
Ocena
1
P
PrintablesWasamolle

Bracket Lenovo M720Q 10Gtek PCI-E NIC X520-A2 Dual SFP+

I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.

Pobrania
89
Polubienia
7
Ocena
5

Lightweight Boomerang V2 (5-Winged) – Under 10g, 30+ Min Flight and center hole

3 winged boomerang 4 winged boomerang 6 winged boomerang

Pobrania
87
Polubienia
9
Ocena
5
P
Printablesgeektoybox

Minimalist Wire Spool Clips (10g-12g-14g-16g-18g)

Took the idea from @alignboytw on Thingiverse ( https://www.thingiverse.com/thing:4684057 ) and created the same basic clips for wire spools in 5 sizes. Hope somebody find this useful! Print instructions Category: Organization Summary…

Pobrania
86
Polubienia
13
Ocena
4,5
P
Printablesmaxelman

QNAP LAN-10G2SF-MLX Full Height PCIe Bracket

Replacement full height / long PCIe bracket mount for QNAP Dual Port 10GbE SFP NEC

Pobrania
83
Polubienia
11
Ocena
0
P
PrintablesNexox Enigma

120mm Fan Duct for Mikrotik CRS305 10G Switch

This is a fan duct to fit a 120mm fan to the underside of a Mikrotik CRS305 10G switch, for extra, quiet cooling of the processor and SFP modules. It attaches to the switch by sliding a pair of lugs into the switch's wall mount screw…

Pobrania
82
Polubienia
6
Ocena
5
P
Printablesidcrook

10-inch 1U rack mount shelf for YuanLey YS25-0802 - 8 Port 2.5 GbE plus 2 Port 10G SFP+ ethernet switch

Switch Dimensions Exterior 197.1 x 73 x 29 mm ( 7.76 X 2.87 x 1.14 inch ) distance between mounting holes: 129.5 mm ( 5.1 inch ) measured 43.5 mm from front measured 29.5 mm from rear Created YS25-0802 parameter set in my fork:…

Pobrania
81
Polubienia
12
Ocena
5
P
Printablesoosharkyoo

Super Micro Intel Dual Port 10GB Nic PCIE Slot

Mine came with only a half height slot so I made a full height PCIE slot holder for them. Exact model is from super micro - Intel 82599 10 GB Dual Port Network Card

Pobrania
79
Polubienia
3
Ocena
0
P
Printablesevd

Dell Broadcom 57711 10gb Network Card Low Profile bracket

A low profile bracket to suite the Dell Broadcom 57711 10gb network card. Part numbers KJYD8 / 0KJYD8 Print with tree supports.

Pobrania
76
Polubienia
2
Ocena
0
P
PrintablesKenny

HP NC552SFP Dual Port 10Gbps SFP+ Card Low Profile Bracket

Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+

Pobrania
76
Polubienia
6
Ocena
0
P
PrintablesNeil Ramsay

QNAP 10G Switch Mount Bracket

This is a wall or back of the desk mount for a QNAP 10G switch. I mount this on the back of the desk and slide the switch into it. It sticks out a bit, but there's plenty of airflow to keep things cool, and it gets things out of the way.…

Pobrania
73
Polubienia
6
Ocena
0
P
PrintablesSchlosser

Unifi UACC-PoE+++-10G PoE injector 10-inch rack mount

I want to minimize cableclutter as much as possible for my 10"-rack (by MandicReally). This 90W PoE+++ injector from Ubiquiti (UACC-PoE+++-10G) is a big honker so I decided to design a 2U mount instead of having it laying in a messy tray.…

Pobrania
72
Polubienia
7
Ocena
0
P
PrintablesAndreuha

Intel X540 10GbE Network Card Chipset 50mm Fan Adapter Bracket

Many forum posts about issues, where the AD3212KB-K71 fans on actively cooled Intel X540 cards are loud and/or unreliable. For my X540 cards, I designed this adapter to swap out the loud little fans with quieter 50mm fans. The bracket is…

Pobrania
69
Polubienia
5
Ocena
4,5
P
Printablesidcrook

10-inch 1U rackmount for YuanLey YS25-0801 8 Port 2.5G + 10G SFP switch rack mount

10-inch 1U rack mount version for YuanLey YS25-0801 ethernet switch. Printed the ears with long edge on build plate. Source: yuanley_YS25-0801

Pobrania
68
Polubienia
9
Ocena
5
P
Printablesidcrook

10-inch 1U rack mount shelf for YuanLey YS25-0402 (4 Port 2.5 GbE plus 2 Port 10G SFP+ ethernet switch)

Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…

Pobrania
63
Polubienia
3
Ocena
0
P
Printablesjackharvest

Thicc Skull - Intel NUC Skull Canyon 10Gbe Expansion Ring (M.2 NGFF to PCIE x4 Chassis)

Full instructions and description for creating this magnificent work of science located here: https://ganon.club/index.php/2019/04/04/getting-10gbps-on-a-skull-canyon-nuc-without-thunderbolt-3-ngff-to-pcie-x4-riser/ In summary: Print this…

Pobrania
63
Polubienia
6
Ocena
0
P
PrintablesMusaedQ8

Intel X540-T2 10Gb Fan Mount Screwless

INTEL X540-T2 10GB PCI network Card FAN MOUNT SCREWLESS Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: 0.3 Infill: 25% Filament: 3D Solutech PLA Red Category: Computer

Pobrania
62
Polubienia
3
Ocena
0
P
Printablesevd

10gb/2.5gb Mini Switch Left Rackmount

Simple rack mount (left side) for a mini 10gbit/2.gbit switch. I'm sure its rebranded under other names as well Brand: Motiedot Model: K0402WS Dimensions: 133mm x 67mm x 33mm

Pobrania
60
Polubienia
9
Ocena
5
P
PrintablesHector Romero

Intel X540/X520-T2 10GbE NIC Fan Shrouds 1U/2U

40mm Fan shroud designed for Intel X540-T2 10GbE NIC's, will also fit some X520 models, 1U and 2U variations, options for extended heatsink coverage and bottom/top fan mount. 2U card fans are friction fit or can be mounted with…

Pobrania
58
Polubienia
16
Ocena
5
P
PrintablesPeter Unlustig

Long Protein scoop 10g

I was tired of getting the last bit out of the protein bag

Pobrania
56
Polubienia
5
Ocena
5
P
PrintablesAche99

10grams mini M3K (GILMORE PCB)

If you're not good at diy, I'd recommend enlarging the enclosure by 10-20% and reworking the internals for easy pcb moun Don't forget to download the pcb model 👇 Gilmouse 模块化鼠标 PCB Mod 套件 – 吉尔摩设计

Pobrania
54
Polubienia
3
Ocena
0
P
PrintablesMaksym

Narrow case for 10g soldering flux syringe

The narrow case is designed to hold Chipquick 10g flux syringe

Pobrania
53
Polubienia
8
Ocena
4
P
Printablesguidosenff

Tall backplate HPE Ethernet 10Gb 2-port 560SFP+ Adapter

My HPE Ethernet 10Gb 2-port 560SFP+ Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the…

Pobrania
53
Polubienia
4
Ocena
5
P
PrintablesCade Hardy

Wall Case 10Gtek Media Converter

Here is a simple case that you can put a 10Gtek media converter into and mount on the wall. Included is a lid if want (Should Fit Most Converters)

Pobrania
49
Polubienia
4
Ocena
0

SPOON HOLDER (light weight 10g)

Spoon holder (light weight) PETG, NEED SUPPORT Weight only 10g!

Pobrania
49
Polubienia
9
Ocena
0
P
PrintablesAlex

Ubiquity 10G PoE++ Adapter (60W) - Rack side mount

Rack side mount for Ubiquity 10G PoE++ Adapter (60W).

Pobrania
48
Polubienia
6
Ocena
0
P
Printables0rqa

Full hight PCIe bracket for Inspur YZCA-00431-102 | Dual 10gbe sfp+ network card

Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model

Pobrania
48
Polubienia
1
Ocena
0
P
PrintablesMilhooz

Potron Yunvo 10G SFP+ XGS PON Stick Fan Mount Cooler

Remix of the model by Exen to have less air gap for the smaller heatsink and make it compatible with PDC004 USB C board

Pobrania
48
Polubienia
5
Ocena
0
P
PrintablesPichon

Sodola 8x2.5G + 1x10G SFP Switch 10-in Rack Bracket

A 1U bracket to mount a Sodola 8x2.5G + 1x10G SFP Switch in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…

Pobrania
47
Polubienia
9
Ocena
5
P
PrintablesDouglas Hale
Pobrania
46
Polubienia
12
Ocena
0
P
PrintablesEziloe

HP NC523SFP 10Gb 2-port

Half Height, low profile PCI bracket for HP NC523SFP 10Gb 2-port network adapter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal Notes:…

Pobrania
44
Polubienia
3
Ocena
0
P
Printablesiplaynaked

57810S Low Profile Bracket - 10gb Base-T Version

Simple low profile bracket for 57810S 10gbe version which I am using with no issues. Print it screw hole side down, with support. I used ASA, but PLA would do. Not sure about PETG, might be too flexible. For reference, I used an enclosed…

Pobrania
43
Polubienia
3
Ocena
0
P
PrintablesPretenda

10Gtek Media Converter 10" Rack Mount

My model is a 10Gtek GT-G0101. Print both the body and the retaining clip and throw it in your rack!

Pobrania
42
Polubienia
8
Ocena
0
P
PrintablesAndrea87

Lenovo m720q bracket for Connectx-3 single 10G card

This is a very simple bracket to install single port Mellanox Connectx-3 card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins…

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesBlernsball

CAMLOCK Adaptor for Bosch CM10GD Miter Saw

This a CAMLOCK Adaptor for the Bosch CM10GD Miter Saw. 43mm ID. It may work on other bosch saws if they have similar dust ports. Let me know in the comments and I'll modify the description. Printed at 0.2 with 25% infill and 6 wall loops…

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesiKlaus

VIMIN 8-Port 2.5G/10G Switch Skådis Mount

Mount a generic Amazon/Aliexpress 2.5/10G switch to an IKEA Skådis pegboard

Pobrania
38
Polubienia
8
Ocena
0
P
Printablesmoloro

AOC-STGN-I2S 10g Network Adapter for the Lenovo ThinkCentre M910q / M910x

I needed a mounting plate for my AOC STGN-I2S network card to install it in my Lenovo M910. Since I couldn't find one that fit my network card, I decided to design one myself. It worked well enough for me to mount the card neatly in the…

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesJustPrinting

SODOLA 8 Port 10G Rackmount 19"

A 19" rack mount for the SODOLA 8-port 10g switch. The model is not 1000% perfect but holds the switch in the rack. Fan that fits: ARCTIC S4028-6KARCTIC S4028-6K. The fan must be controlled via another server. I would print with ABS or…

Pobrania
35
Polubienia
6
Ocena
5
P
PrintablesBG

RC10GT 2.2-3.0 Rear Wheel

I created this model to adapt a proline badlands MX tire to an old RC10GT that I converted to electric drive. I printed in PETG with the outer face down on the build plate. It has held up pretty well so far.

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesFluFFy

Intel x561T 10gig NIC 4010 fan shroud

Verry snug fit, needs a bit of a hand and wiggle

Pobrania
33
Polubienia
6
Ocena
5
P
Printableslbatalha

Mokerlink 2G040210GSM 10" Rack Mount

This is a 1U, 10" Rack mount for the Mokerlink 2G040210GSM Managed Network Switch. You can find the Onshape document (along with all of my 10" rackmount designs) here . I have also included STEP files. To securely mount the switch, it…

Pobrania
33
Polubienia
1
Ocena
5
P
PrintablesSamux6146

Nokia ONT G-010G-R / T Rack Mount

a rack mount for the nokia G-010G-R / G-010G-T ONT -to make the ont so it doesn't slide out, i used some cable ties.

Pobrania
31
Polubienia
3
Ocena
0
P
Printableshoffma0901

40mm Fan Shroud for 10Gb NIC Inter-Tech ST-7211

This is a clip-on 40mm fan shroud for the Inter-Tech ST-7211 10Gb SFP+ Network Card. Print with supports -→ screw on fan -→ clip onto heatsink In order to connect the fan to the network card you may need so solder a JST-XH 2 Pin connector…

Pobrania
31
Polubienia
2
Ocena
0
P
Printablesczsmola

NICGIGA 10Gbps Network Switch Bracket

8 Port X 10Gb Base-T Ports, NICGIGA 10Gbps Network Switch Required a frame to mount the Ethernet switch to a wall. The Size has Been Adjusted from original to Fit different Device. 182mm x 45mm Very Tight Fit, Just Force it. I printed on…

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesInfrageeks

Skadis mount for QNAP TB3/10GbE adapter

A quick design to hold a QNAP QNA-T310G1S or QNA-T310G1T ( https://www.qnap.com/en/product/qna-t310g1s or https://www.qnap.com/en/product/qna-t310g1t ) on a Skadis panel. It uses the Universal Hook…

Pobrania
30
Polubienia
5
Ocena
0
P
Printables001

Unifi 10G PoE+++ Injector and Flex Mini 2.5G switch 10-inch Rack Mount

A 10-inch rack mount bracket for the Unifi PoE+++ 90w injector (UACC-PoE+++-10G) and the Flex Mini 2.5G (USW-Flex-2.5G-5) Be sure to print this in a more heat resistant material, the injector gets hot enough to warp PLA! I printed mine in…

Pobrania
29
Polubienia
2
Ocena
0
P
Printablesjackharvest

Intel NUC 5th Gen 10Gbe Networking Ring Adapter / Mount (i3, i5, i7)

[Printed in Silk Silver, 10% infill, .2 height] - Original Reddit threat on /r/NUCLABS: https://www.reddit.com/r/NUCLabs/comments/dnzeu1/intel_nuc_5i3i5i7_series_10gbe_connectivity_debut/ You want 10Gbe connectivity in a Gen 5 NUC, and…

Pobrania
28
Polubienia
8
Ocena
0
P
Printablesguidosenff

Tall backplate HPE Ethernet 10Gb 2-port 561T Adapter

My HPE Ethernet 10Gb 2-port 561T Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the model. I…

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesAli

IO Shield for 10G NAS Motherboard N100

This is the IO shield for Topton NAS motherboard N100, 2x2.5G and 1x10G from Aliexpress. The shield partially covers the HDMI/DisplayPort but does not block it.

Pobrania
27
Polubienia
3
Ocena
0
P
PrintablesCellcon

Rackmount for Nokia ONT G-010G-Q Glasfaser Fiber Modem

Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.

Pobrania
27
Polubienia
1
Ocena
0
P
Printablesalexxxx

wire brush clip no hardware super light ~10g

i use klipper, and cure: paste this for in cura, in "START G-CODE" START_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0} here is my macro : [gcode_macro START_PRINT] gcode: {% set…

Pobrania
27
Polubienia
16
Ocena
0
P
PrintablesdeHaha

Formd T1 V2.1 10GBE NIC pcb bracket

Mounting adapter for the IOCrest 10GBE m.2 NIC PCB. Fits in one of the 19mm holes in the Formd T1. Infill - 40% Supports - Yes, block out mounting holes Adhesion - No Print with mounting hole side flat on printbed

Pobrania
25
Polubienia
9
Ocena
5
P

10" Rack Xiaomi 10g SFP+ SW-106T-A

I needed a 10" rack mount for my router. 👍 The router press fits straight into the print. I needed to remove front feet 💪 I suggest PETG, but i made one with PLA that held up fine until i printed one in PETG. No supports needed. I…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesBrewprint

HP Procurve 1810G-8 10 inch rack mount

Made a simple mount for the HP Procurve 1810G-8 so it will fit my 10 inch rack! Could work with other models not sure. You need 4 M3 screws!

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesCocacolas29

Locked Carabiner, one print, 10gr

I needed a carabiner for few things at home and wanted to create mine so there it is. Printed with PLA, 15% infill, 0,2 mm layer height. No support and only 10gr of material. Tested with 15 kg load and didn't break but of course never use…

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesGBMaryland

Skeet Sub-Gauge Knockout Tool for 410ga / 28ga / 20ga tubes

This is a recreation I did in CAD for a standard skeet 12ga shotgun sub-gauge tube knockout tool. Barrel inserts are full length tubes that convert a 12ga shotgun into either a 20ga, 28ga, or 410ga shotgun for the purposes of competition…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesNASA FAN

Mini Boeing 777-300ER – 1h Print | 10g PLA

Beschreibung Beschreibung: Es ist ein Modell der Boeing 777-300. Ich wollte ein filamentsparendes Modell mit kurzer Druckzeit. Dazu kann man auch die Fenster sehen. Dieses Modell ist (hoffentlich verständlich) nichts für die Leute, die…

Pobrania
23
Polubienia
2
Ocena
0
P
Printablesmichaelkr1

QNAP 10gbe rack mount

I run Intel NUC's in my server rack for my virtualization. I wanted a way to properly hold the QNAP thunderbolt to 10gbe SFP adapters rather than just resting them on top of the NUC. The print can hold the adapter in any direction…

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesKenLee

10g Super Glue Tube Holder

Holds 6 or 12 of the 10gram Super Glue tubes. Prints well in PLA, no supports needed.

Pobrania
20
Polubienia
8
Ocena
0
P
PrintablesJascnC

mini network rack for 2.5G/10G switch and unifi 6 lite

I made this mini rack will be mounted under my desk for easy access to my high-speed intranet. It is mounted under my desk with 3 wood screws. I have reserved a screw mount at the back, so it is possible to design a stand-alone version.…

Pobrania
20
Polubienia
3
Ocena
0
P
Printables001

Unifi 10G PoE+++ 90W Injector 10-inch Rack Mount

A 10-inch rack mount bracket for the Unifi PoE+++ 90w injector (UACC-PoE+++-10G). Be sure to print this in a more heat resistant material, the injector gets hot enough to warp PLA! I printed mine in ABS. Supports are needed for the…

Pobrania
19
Polubienia
1
Ocena
0
P
Printablesmaster 3D PT

Stackable Ammo Box Double Tall 10GA

📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…

Pobrania
19
Polubienia
17
Ocena
0
P
PrintablesObscure Fault

MokerLink 2G05110GSM Bracket

Quick screw down bracket for a MokerLink 2G05110GSM network switch Using two of these on each side of the switch For mounting the switch with the ports facing sideways. It is ~ 0.5mm in height less than the thickness of the switch so that…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesDuglum

Under-Desk mounting bracket for Mokerlink 2G040210GS with active cooling

I needed a mounting bracket for my cute little Mokerlink 2G040210GS Switch (4x 2.5Gbit and 2x SFP+) and this came out. Since i have to use 10Gbase-T SFP+ Transceivers i also wanted to add some active cooling for them. They get HOT. It…

Pobrania
16
Polubienia
0
Ocena
0
P
Printablesspengineer

Rack mount ears for 2.5g switch and 10g SODOLA SFP media converter

A set of rack mount ears for a NICGIGA 2.5g switch , and an additional option for also mounting a SODOLA 10g SFP to ethernet media converter . May work with other brands of switch or media converter, there are many seemingly identical…

Pobrania
16
Polubienia
2
Ocena
0