136 modeli
Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…
Wydruk około 8,13 €–9,94 € nettoWstępna wycena jednego wariantu
A stand to raise the Teenage Engineering KO II sampler to a more comfortable 10°-20° incline. Slotted pegs insert into pre-existing holes in the KO II for a snug, removable press-fit (depending on your printer tolerance). There are three…
A simple cover for your KO II. I wanted a small cover that doubled as an angled stand so I could throw my KO II into by bag's laptop sleeve. Protects the screen, fader and knobs. Prints very easily with no supports required. There are…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
Ikea 101339 dowel mainly used in KALLAX Use 6 perimeters. No supports needed Printed on Ender 3 V2 Neo
Originally published here: Motorola Moto G60 & G60s xt2133 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models' materials are not interchangeable , so pay attention…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
Replacement for the original clip that can be lost or broken. Expensive (costs around USD1 per piece) and frequent not in stock. Can be damaged when removing during front brake maintenance. Takes 7 minutes to print one part. Use 100%…
Print took almost 38hrs at .2mm layer height %15 infill using 297g of filament on my E5+, although it may take less depending how fast your machine is. I've uploaded 2 versions of this model, the model v2 doesn't have the part protruding…
EN: This is my Hex Peg Board (#0133). The mounting screws are countersunk. All holes are useable. Minimal support is required (Tree Support). This Board is NOT seamless. You can only place a holder on one tile. From one to another tile it…
Hard case designed to fit the EP-133. No supports needed. You can use an AMS or tool changer to print the multi colour version or perhaps just print each half in different colours :) Happy Printing :)
ko II 2 ep 133 teenage engineering Battery Cover in prusa slicer its easy to add text. embossing etc this is a first pass. tolerances could be better. size is slightly off. It fits though. Ill circle back and update slightly at some…
Opel Astra J and K and maybe more read compartment side trim panel/ Trunk Side Trim Retainer GM (13310144)
Replacement fader knob that fits the full length of the stem and rests on the EP-133. You might have to adjust the X and Y scale a little to get it to fit perfect. I was at 102% in prusaslicer for a perfect fit.
This model is compatible with the lego system.
I wanted a cover/protector for the EP-133 so I can throw it in a bag for travel. I grabbed the official bag from TE, but it's a soft bag, so I made a cover to go along with it to protect the fader and knobs from crush damage. My design…
Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
Stand is 2 models, 5 prints. It utilizes m4 hardware. So you will need M4x6mm flat head screws and I used M4 heat inserts 6mm diameter and 4mm long. You can add rubber bumpers as needed but it has been working fine for me without any.
Immer wieder mal druckt man Lithohane Bilder und weiß nicht genau wie man diese präsentieren soll. Aus diesen Grund habe ich mir für die große die ich am meisten drucke einmal einen Rahmen erstellt. Maße vom Bild sollten sein 200x133mm.…
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
Battery Pack for Recycled - 13300 from disposable E-Cigarettes. https://www.printables.com/de/model/1008015-battery-pack-for-recycled-801640-fake-akkus
This model is compatible with the lego system.
This model is compatible with the lego system.
This can be used as a spare part for Zanussi refrigerator with holes in the distance 133mm.
Remixed these knobs to fit KOII because the originals on the KOII lack some grip. Added pointer to the design. Pointer can be easily painted and printed in alternative color. I used this fader knob from the start and never tried on the…
This stand increases the angle of the Teenage Engineering EP–133 K.O.II during use. It uses official technic pins so you don't need to worry about 3d printed ones breaking off inside the device.
General The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands. But you can use the blank plate to remix your own version if you have different needs for your car 😄 The gasket…
No supports needed, Nice snug fit when printed with my A1 Mini.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Sizing and Fitment: For small to medium dogs. Fits…
Requires 2 of the M2.5x4 screws included in the RAK kit. Bolted version requires 2x M2.5x8mm screws and nuts.
reupload from https://www.thingiverse.com/thing:4464329
This is a replacment part for the "Halter Siebträger" component of the "AEG Electrolux EA 150" espresso machine. https://www.massinger-ulm.de/epages/61366570.sf/de_DE/?ObjectPath=/Shops/61366570/Products/4071330916 The genuine spare part…
Make shure the material the final part is made of can withstand at least some heat ( i would guess it should be around 100-150°C. I used B07H5S9VP5 (ASIN, use search funktion on amazon) although the material could have been a bit stiffer…
Print a back piece and then the frame itself, then sandwich the picture between them. You can use superglue to adhere the pieces together. The frames look especially nice if you use one of those carbon fiber smooth plates. Textured plates…
ko II 2 ep 133 teenage engineering technic Stand Simple stand for the 133. these are 240mm long. this is very large for a 3d printer. my printer tops out at 180mm so dimensional accuracy is hard to verify. Technic pins are difficult to…
VW T3 air vent cover left and right. Printed with PETG and supports. Part Nr. 251259133A Leave a tip for a Coffee if you like :) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%…
Its a box to catch plastic waste. Insert 2 magnets into the slots. put 2 more on the outside of the box and attach foam tape to those magnets. Gently push against the side of the printer to align the mounting magnets. Includes design file.
Woven style speaker cover for the K.O. II
I had the shelf at home, but was missing the mounting elements. The originals can be ordered from IKEA, but I wanted them faster. Thus I drew them in FreeCAD and printed 4 pieces in 22 minutes. Print settings: 0.4mm nozzle 0.2mm layer Put…
A complete copy of Heghead's excellent design but using less filament where I didn't think I'd worry about the KO II getting knocked when it's put into a bag.
Will provide extra security when applying your fader knob reducing unwanted downward force. Printed on three different printers, I would say the tolerances are good for most machines although my A1 Mini is such a good boy I could perhaps…
small and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
Náhrada 9V baterie za baterie 13350 z jednorázové elektronické cigarety bez další elektroniky. POZOR na polaritu článků! Články nabíjím v externí nabíječce. Při plném nabití je napětí 8,4V. 9V battery replacement for 13350 batteries from…
KO II Shelf - Teenage Engineering EP-133 Show off your beautiful KO II on this secure, wall mounted shelf. Prints without support in the provided orientation. Slot locks the KO II in position so it wont slip out. Attach to any surface…
A replacement keycap for the teenage engineering EP-133 and EP-1320 sampler.
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Simple cheeks for the 133. Nice to add a splash of color to this sampler. these are 240mm long. this is very large for a 3d printer. my printer tops out at 180mm so dimensional accuracy is hard to verify. Technic pins are difficult to…
I’m creating low-poly versions of the original Pokémon Pokédex. I hope you like them, and let’s catch 'em all!
Support Do you like this design? If so, consider buying me a coffee – it would truly make my day! PX21 / TR133R / V21PX / PX-21 / UG-523 Battery Adapter (for Praktica) This is a battery adapter designed to replace the discontinued PX21 /…
https://cad.onshape.com/documents/d371584d7160c723bbf761f6/w/2f5678efad21dca11f6d6ea2/e/23b2ec25e7ee325d5a9e6f6f?renderMode=0&uiState=6613006142973974d60d759e
The SV133 is a low cost manual filter wheel that suffers from some unfortunate light leaks through the control wheel. Other brands (eg. Astromania) also offer nearly identical models that would probably fit as well. This cover goes over…
got a LP133WF2-SPA1 controller board with HDMI and VGA for a Lenovo Yoga 2 13" LCD screen as a small/portable 2nd laptop screen. Didn't find any fitting case, so created this one, that fits my needs. Print Settings Supports: Yes…
Key for Yakima SKS lock with code A133 Based on Yakima control key design
2x 3D-printed stand legs (left and right) for the Teenage Engineering K.O. II sampler. They're a compact minimalist stand solution for displaying and playing the device at a 20 degree angle. I did lots of testing and The legs connect to…
My first ever design, made for stacking multiple plastic shelf bins sold by Uline. I have been printing these 12 at a time by stacking them vertically in the slicer, using these great tips.
Introducing the Gridfinity 1x1 LR1133 Storage Bin, designed to hold 10 LR1133 batteries. As storage options for LR1133 batteries are limited, with most focusing on LR44 or LR1130, this compact 1x1 bin provides a tailored solution. Given…
This model is compatible with the lego system.
remix of a remix, of the original by alley cat. I extended the back by 5mm to make room for 2 13350 li-po batteries. These batteries are commonly found in disposable vapes.
After I bought the EP-40 "Riddim", I now had three Teenage Engineering EP units, and had a new problem on my hands, storing them in such a way that I can access them quickly. Hence this design, inspired from banquet or conference…
A minimalist WC door hanger , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices, gyms, and wellness…
this is my dna133/75 3d printed mod . it will fit 2x 18650 batteries one dna200/75 board . id suggest to print in abs or petg. you may, or may not need supports for the board standoffs. id recommend printing 200 microns or less. typical…
We were given this palace, but part of a tower was missing so I modeled a new one ;)
The part name embedded in the original is 4B0861337B RBU and it comes from an Audi A6 C5. This part broke in my father-in-law's car, and since it's either unavailable or quite expensive, I was tasked with printing one. However, I couldn't…
Volkswagen AG Spacer sleeve 357864133A for multiple cars. List for the cars can be found from: https://www.oemvwshop.com/357864133a-spacer-sleeve-p380651/ Print ABS, PETG or PA66 One side has chamfer to make model printable without…
Remix of the great case by heghead.
ORGANIZZATORE GT133 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
The model provided by @Poty_1688301 already worked great for mounting 3.5" HDDs in my Fujitsu RX1330 M5, yet I wanted to be able to switch between 3.5" and 2.5" drives without printing separate caddies. Thus my remix adds screw holes for…
Replacement pull tab (clip/hook) for the rear door manual sunshade on the Audi Q7 (4L) . This model was created to replace the fragile factory part using precise measurements and 3D data. The design is based on a high-resolution 3D scan…
Grille de sol siphon Nicoll 133mm Diamètre intèrieur 109mm Diamètre exterieur 132mm PETG, ASA ou ABS conseillé
A holder for the Bondhus T-handles sets where the tool can be retrieved from the top or front, allowing room for other tools around the holder. The holder can be assembled by through a sliding mechanism, it also features a French cleat on…
SLIM and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
I created this remix to split my batteries into smaller packs, for more versatility. This allows me to power a variety of electronic projects I’m working on. I hope it can help you too!
CZ - pro montáž dávkovače saponátu nebo otoč. sítkového ventilu EN - for mounting a detergent dispenser or a rotary strainer
I added an opening on the side for the EXT_5V wiring to come out. Is it on the "wrong" side because I'm dumb or because that's where i needed it? The world may never know (it's because I'm dumb). It works for me, so I'm not inclined to…
Remixed top cover for https://www.thingiverse.com/thing:3673207 . Original had holes in wrong places. Also replaced ventilation holes with stripes. Print instructions Category: Computer Summary Remixed top cover for…
Basic beer box design for li-ion 13300 disposable vape batteries inspired by 18650 beer box designs, added a little lip so it could be stackable, 2 walls 15% infill This design was made from the dimensions of 13300 battery Fits 6 x 13300…
Useful way to reuse li-po cells from disposable vapes. the powerbank board used was 22.5w usb-c powerbank board from aliexpress. EDIT: (Once updated will delete the EDIT or mark updated) I didn't yet balance the cells so it isn't yet…
Depending on the battery shape, some length scaling might be needed (or you can use aluminum foil); be sure to leave some space for the spring. I have made some presets, but for most, the 40mm version is best. Before inserting the…
Prototype of the replacement Electrolux part 1330184465 - the buttons for Electrolux Rangehood. Likely it will need to be printed in TPU to last. The PLA prototype snapped on first press. This uses ‘wedges’ to hold itself in place so that…
Lost mine for my vaccume, designed 3d printed this up and it was a tight fit, but fit well. Designed to slide over hose.
The original crank arm on my spreader became damaged, This is a printable replacement as Scotts does not offer a replacement. Printed in PETG for improved strength, durability, and outdoor use. The crank was designed with a reinforced…
cant wait for the lms with slasher
the bushings should fit the intake manifold of a vr5 20v engine circa 2003, this engine came in the bora, golf and jetta mk4, they were printed in ABS at 100% infill and scaled up to the shrinkage of my current spool (100.37 in…
A more ergonomic and better fitting replacement for the original fader knob I printed in white PLA on the Ender 5 S1 enjoy!
This is a modified version of @AlastairGreen_326352 's KO II Shelf to take magnets. I wanted to be able to mount it on the side of my server rack which is metal. It works great and has more than enough magnets to hold it. I also put some…
Even less filament. took away some excess material and made a customizable grill (trough the infill). Print in TPU!
Passat B6 B7 3C9861337 I recommend printing on ABS plastic
My favorite version of rush hour is from @InsertNameHer_211338 https://www.printables.com/model/217734-rush-hour but there is no case for it. So I redesigned it to have a notch and be able to use case from @Jamehz Rush Hour Storage Case…
i needed a longer to mount my Ender 5 Max bed in a 520 Redux i gonna use 133mm in the rear...
Holder for battery size 13300. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Creality PLA Category: Accessories
This is the companion part to my replacement crank arm and is intended to replace the original rotating handle knob found at the end of the crank. The knob is designed to rotate freely on the crank arm, providing a comfortable grip while…
woodworking stands stanley STST81337-1 wall mount
