Wyniki wyszukiwania: 31

Sortowanie

2299 modeli

P
Printablesgeektoybox

Logitech C270, C310 and C505 Focus Wheel (Complete)

I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…

Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2789
Polubienia
423
Ocena
4,94
P
Printablesyossarianmtu

Stihl FS91 and FS31 Trimmer Wallmount

A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…

Wydruk około 9,25 €–11,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1735
Polubienia
190
Ocena
5
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
891
Polubienia
203
Ocena
4,76
P
Printablesinfinitevalence

m720q/m920p Baffle for CX312B-PRO Connect X-3 Card

Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…

Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu

Pobrania
408
Polubienia
38
Ocena
5
P
PrintablesDaniel Vitanza

C270 / C310 Focus Ring + cover with leds and microphone holes

1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…

Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
301
Polubienia
28
Ocena
4,88
P
PrintablesAku N

RC Tank T-34 PS. 231-1 ABS Bearings

Sliding bearing for tank tracs wheels. Material ABS.

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
270
Polubienia
36
Ocena
5
P
PrintablesMehTechArt

BMW 850 CSi E31 Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 The Bavarian V12 masterpiece – now on your wall. This 3D printable model of the iconic BMW 850 CSi (E31) offers a sleek, minimalist tribute to one of the most elegant and powerful grand…

Wydruk około 11,64 €–14,22 € nettoWstępna wycena jednego wariantu

Pobrania
221
Polubienia
62
Ocena
5
P
PrintablesYetti

ESP32 Wroom Case with Sensor SHT31

Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…

Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
204
Polubienia
17
Ocena
0
P
PrintablesBP3D PRINTS

311 Band Logo

I created a 311 band logo. This was made to fit an Ender 3 v3 bed, but feel free to scale to your liking.

Wydruk około 2,03 €–2,49 € nettoWstępna wycena jednego wariantu

Pobrania
113
Polubienia
4
Ocena
0
P
Printables_KaszpiR_

Drybox Clip for Round Multibox 3.4L EAN 8694064003156

About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…

Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
100
Polubienia
14
Ocena
5
P
Printablesgskollnau

Bonsai pot 11 rectangular rounded (mame) 131x91x39mm

A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
92
Polubienia
21
Ocena
5
P
PrintablesDimbulb

Hearing aid battery holder type 312 with Keychain hole

I really liked the simplicity of this model but I need it to be on my keychain or I will for get to take it with me when I go places. Thanks to @Bbrinck_1460947 for the initial design if you just want the box and not the additions for a…

Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
82
Polubienia
7
Ocena
5
P
PrintablesUko

CC2531 Zigbee Dongle Case Repaired & Split

Exactly like the original model ( https://www.thingiverse.com/thing:2803664 ), but I've repaired it and split into 2 parts (otherwise slicer splitting could fail, etc…)

Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
77
Polubienia
2
Ocena
5
P
PrintablesR.R.

Mercedes-Benz SSKL Mille Miglia #87 (1931)

Mercedes-Benz SSKL / Mille Miglia #87 (1931) Actively engaged in all major racing events worldwide between 1927 and 1933, including Grand Prix contests, endurance races, and hill-climbing championships, the Mercedes-Benz supercharged…

Wydruk około 6,98 €–8,53 € nettoWstępna wycena jednego wariantu

Pobrania
61
Polubienia
3
Ocena
0
P
PrintablescoffeeFueledDiy

Samsung Washer/Dryer Knob Mount DC64-03186A

NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…

Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesMaxGyver

ODRIVE S1 D5312s 330KV flange mount

The mount is designed to use the Odrive S1 heat spreader. It aligns the motor shaft with the magnetic encoder and leaves a 1mm gap between the magnet and the encoder. A 6mm diameter an 5mm thick magnet sold in the Odrive shop is used. The…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
49
Polubienia
2
Ocena
0
P
Printables3D Shuttle

AstroNots Starship MMU Version (S30/S31)

Farben 1 Galaxy Silber https://www.prusa3d.com/de/produkt/prusament-pla-galaxy-silver-1kg/ 2 Anthrazit https://www.dasfilament.de/filament-spulen/pla-1-75-mm/444/pla-filament-1-75-mm-anthrazit-v2?c=11 3 Schwarz…

Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesR.R.

Mercedes-Benz SSKL, Mille Miglia, 1931

Mercedes-Benz SSKL / Mille Miglia #87 (1931) Actively engaged in all major racing events worldwide between 1927 and 1933, including Grand Prix contests, endurance races, and hill-climbing championships, the Mercedes-Benz supercharged…

Wydruk około 5,90 €–7,21 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
5
Ocena
0
P
PrintablesBruce

27.2 to 31.8 Seatpost Shim by Bruce

A shim for your bike allowing you to fit a 27.2 seat post in your 30.9 seat tube. Suitable for all kinds of bikes, seat posts and materials. Please contact me if you want different sizes. Made on a PRUSA MINI+ using PETG filament.

Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
43
Polubienia
4
Ocena
5

HSW Emos MD-310 Multimeter mount

Remix of @forsaken_candy 's multimeter mount for Emos MD-310, or any multimeter that fits dimensions up to 74x32mm(length x width)

Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesPincoyo

Astronomy : Counterweight Adapter Diameter from 31.75mm to 25 mm (1" 1/4 to 1")

This astronomical adapter allows the use of 1" 1/4 (31.75 mm) internal diameter astronomical mount counterweights on 1" (25.4 mm) diameter rods. The adapter is drilled to allow passage for the counterweight locking screw on the rod. The…

Wydruk około 0,81 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesSean Kane

Frigidaire 318242275 (Electrolux ICON ) Stovetop knob base & post strengthener

This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesVivero

Mounting bracket HP AC adapter PA-1231-66HJ

The status light is still visible through the hole. Printed in PLA 0.2mm layer height 50% infill No supports needed

Wydruk około 3,59 €–4,38 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 31

PAL-Übungsaufgabe 31

Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
Printableszoltanf

Case for BM31 Moisture Measurer

This a simple case for the BM31 moisture measure instrument. I wanted to have one without buying any of the expensive ones. It fits the device perfectly. It's possible to add some small rubber pads to the inside so that it lays on a…

Wydruk około 11,84 €–14,47 € nettoWstępna wycena jednego wariantu

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesREMLURELMI

Clock Arbor Cover - fits 31 day Waltham and others (5 mm arbor with 10mm hole).

Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default

Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesPavel Míka

Avia Truck Window Latch / Lock Replacement (Avia A21 / A30 / A31)

Overview A functional replacement window latch / clip designed for vintage Avia trucks (frequently used in classic European fire trucks and utility vehicles). This part attaches to the side window mechanism to keep the window securely in…

Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesSanket Singla

TVS Apache RTR 310 Multicolor Poster – 3-Color PLA Print

TVS Apache RTR 310 – 3-Color Multicolor Poster 🏍 A flat, multicolor 3D-printed poster inspired by the TVS Apache RTR 310 , featuring a black base with red and white details. Made for Apache enthusiasts, this slim decorative print is…

Wydruk około 1,75 €–2,13 € nettoWstępna wycena jednego wariantu

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesEon3D

Snappy – 31 min – The Swamp’s Cutest Snapper!

Snappy is a chubby little gator with a big smile and even bigger charm! Whether you keep him on your desk, gift him to a friend, or turn him into a keychain buddy, he’s ready to snap into action. This one-piece monocolor 3MF prints smooth…

Pobrania
4609
Polubienia
619
Ocena
4,85
P
PrintablesEon3D

Elko – 31 min – The Tiny Elephant

Say hi to Elko, the mini elephant on a mission to melt hearts! With his sweet face, big ears, and stubby little trunk, Elko is the ultimate cute collectible. Quick to print and easy to love—your jungle desk buddy has arrived!

Pobrania
2700
Polubienia
420
Ocena
4,88
P
PrintablesQuadView

Made for Glock 17, 19, 23, 31, 32, 34, 35, 37, 38 Gen 1-3 and Polymer80s Grip Frame Insert Plug

"As a 3d printing nerd, one doesn't buy plastic things one can design and make" The only plastic I buy now comes on spools. So I hit up Fusion 360 and made this little guy. THE NEED++++ Was getting hangups on my magazine changes on the…

Pobrania
2601
Polubienia
252
Ocena
5
P
PrintablesMaxT

Christmas Door Trim Corner 31 (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Pobrania
1724
Polubienia
356
Ocena
4,89
P
PrintablesTeirale

(31) Warlock Elf - Gender neutral - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…

Pobrania
1699
Polubienia
171
Ocena
5
P
PrintablesElvin

25/31/33/36 mm Paint bottle holder for HSW

Update 20230314: Working on another variant that sits better. Will leave this up for those that want. New variant at https://www.printables.com/model/423896-honeycomb-paint-holder Since i find…

Pobrania
1686
Polubienia
319
Ocena
4,36
P
PrintablesKahnindustries

Lapras - Pokemon 131

In honour of Pokemon Go's Lapras Raid day (May 25th) I have knocked up a Lapras one piece and multi-material model Need supports for its floppy head Print instructions Category: Creatures

Pobrania
1597
Polubienia
397
Ocena
4,6
P
Printablesthall72

Lego Compatible (54200.dat) Slope Brick 31 1 x 1 x 0.667

This model is compatible with the lego system.

Pobrania
1455
Polubienia
50
Ocena
5
P
Printablesdandos23

DeWalt Jigsaw DCS331

This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…

Pobrania
1295
Polubienia
218
Ocena
5
P
Printablesthall72

Lego Compatible (85984.dat) Slope Brick 31 1 x 2 x 0.667

This model is compatible with the lego system.

Pobrania
1280
Polubienia
48
Ocena
5
P
PrintablesAlex Huysegoms

Base plate for the Honeywell DCP311 / DCP511 / DCP911 doorbell button.

The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…

Pobrania
1187
Polubienia
31
Ocena
5
P
PrintablesPRIma

Chevrolet Truck Model 3100

3D printed model shown in the image was done with 0.15 layer height /30 percent infill/PLA only Body part needs support Dimension: 128x51x43mm simple assembly therefore does not require further explanation just glue the parts together

Pobrania
1165
Polubienia
194
Ocena
4,8
P
PrintablesAl Mon

Ranger RF-31D from Interstellar

This is a remix of the Ranger from Mark Toth on Grabcad. Added thruster details, solar panels and landing gear. Model is 260mm in length. Will be adding a decal sheet soon. Enjoy. If you haven't seen the movie, it's a great sci-fi film.…

Pobrania
1139
Polubienia
108
Ocena
4,88
P
Printableskennille

AN/PVS31 Binocular Night Vision Model

The L3Harris Binocular Night Vision Device, also known by the military nomenclature AN/PVS-31A, is a compact, lightweight, Generation III high-performance white phosphor dual-tube goggle……But this thing is only a model, if you want to…

Pobrania
1108
Polubienia
94
Ocena
4
P
Printablesthall72

Lego Compatible (3031.dat) Plate 4 x 4

This model is compatible with the lego system.

Pobrania
953
Polubienia
36
Ocena
5
P
Printablesthall72

Lego Compatible (2431.dat) Tile 1 x 4 with Groove

This model is compatible with the lego system.

Pobrania
947
Polubienia
36
Ocena
5
P
Printablesthall72

Lego Compatible (23186.dat) Minifig Hair Swept Left Tousled

This model is compatible with the lego system.

Pobrania
889
Polubienia
70
Ocena
3

310mm Toroidal fan blade

Don't forget to post a make and give this model a rating, I love seeing those!

Pobrania
884
Polubienia
73
Ocena
4,83
P
PrintablesLoboCNC

31 Day Spiral Pill Box

This compact pill box will store 31 days worth of pills. Just twist the cover open until you find your next pill. Day-of-the-week markers on the end let you know if you've missed a day. The cover can be locked closed to prevent accidental…

Pobrania
854
Polubienia
198
Ocena
5
P
PrintablesWerner xxx

tube caps (oil can, silicone tube (310ml cartridge), ...

OpenSCAD model to simply create a cap with a few measurements. 2025-12-24 update: I've added a replacement nozzle that can be screwed to the tube and a screwable cap to just close the tube without the nozzle. Of course you can buy…

Pobrania
842
Polubienia
392
Ocena
5
P
PrintablesxSteve

Vase 318v1

Beautiful flower vase with a twist. It is for decorative purposes. It is 165mm tall and 119mm wide. Print time approximately 2 hours 20 min. Print instructions Nozzle size: 0.4 mm 0.2mm layer height 0.8mm wall line width / extrusion width…

Pobrania
836
Polubienia
146
Ocena
5
P
Printablesthall72

Lego Compatible (3176.dat) Plate 3 x 2 with Hole

This model is compatible with the lego system.

Pobrania
797
Polubienia
36
Ocena
0
P
Printablesbu574

iphone magsafe stand anker 313

This is a magsafe stand for iphone 13/13 mini - other models may fit also. Fits for Anker313 magsafe pad. No supports required, printed in ABS on a Voron Trident with 0.2 resolution.

Pobrania
768
Polubienia
49
Ocena
4,57
P
PrintablesKevinsHope

E-11 Blaster by mh319 Remixed with instructions, articulation, and bolt

I really enjoyed assembling the blaster from mh319, but there were some things I wished it had that it didn't. So here is an overview of what has been changed or added. I created instructions to assemble it. I added screw holes, an…

Pobrania
737
Polubienia
165
Ocena
5
P
Printablesthall72

Lego Compatible (6131.dat) Minifig Wizards Hat

This model is compatible with the lego system.

Pobrania
737
Polubienia
69
Ocena
4,33
P
PrintablesHonza_Zik

Steam Locomotive 310.0134 KAFEMLEJNEK [1:25]

Besides the printable parts, you'll also need: 2x M4 x 16 self-tapping screws with countersunk heads 4x M4 x 35 self-tapping screws with countersunk heads Glue ✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮✰✮ If you see a four-digit…

Pobrania
731
Polubienia
116
Ocena
4,67
P
Printablesthall72

Lego Compatible (24316.dat) Technic Axle 3 with Stop

This model is compatible with the lego system.

Pobrania
724
Polubienia
50
Ocena
0
P
PrintablesDxmisfn

Chevrolet Truck Model 3100 kit card

This model is a detailed 3D printable replica of the classic Chevrolet Truck 3100 on a kit card! The design captures the vintage appeal of the truck, complete with iconic features like rounded fenders, a distinct front grille, and smooth…

Pobrania
716
Polubienia
93
Ocena
5
P
PrintablesSop_3d

Canyon H31 garmin mount

Soporte de Garmin para el manillar de canyon h31. El soporte original vale 30€, entonces pensé y si lo hago con la impresora. Después de muchos modelos y diseños diferentes he conseguido este, está en proceso y aceptó propuesta de mejora.…

Pobrania
704
Polubienia
33
Ocena
4,33
P
Printablesbtadeus

19" Server Rack Blank Plates (1U, 2U, 4U) (EIA-310)

Here are some 19" server rack blank plates sized at 1U, 2U, and 4U that should save you a few dollars over purchasing from Amazon or Monoprice. I printed these in PETG at 0.2 with 20% infill, but do whatever works best for you. You'll…

Pobrania
676
Polubienia
130
Ocena
5

Stamp Wheels for Clay – Egyptian Patterns Vol.06 (31-32)

2 stamp wheels from the Egyptian Collection (31-32) These digital 3D printable models are meant to create textures in clay and polymer clay, EVA foam, dough, cake fondants, and other materials. These wheels work best for pottery and other…

Pobrania
672
Polubienia
133
Ocena
5
P
PrintablesxAxBxCx

VH31 to NH35 Movement Spacer

This movement spacer allows a VH31 movement to fit within the most common NH35 cases. The files are upside-down, so please flip them over in the slicer before printing :) The movement spacer also has holes for NH35 dial feet, so you do…

Pobrania
656
Polubienia
31
Ocena
0
P
PrintablesThimira

USS Discovery - NCC-1031 - Crossfield-class Science Vessel

This is a remix from the excellent and highly detailed model by Burning_Bridges : https://www.thingiverse.com/thing:3067279 The original obj file was not printable as-is. So, I did extensive repair to it to make it printable. I have also…

Pobrania
634
Polubienia
30
Ocena
4
P
PrintablesHogger

Star Trek Section 31 Stealth Ship

This is the Star Trek Section 31 Stealth Ship seen in Star Trek Discovery show. The model was designed by me in a way that the single parts can easily be printed and that you don't need to paint the model. Some of the parts can also be…

Pobrania
634
Polubienia
144
Ocena
5
P
PrintablesRANPETEL

A320 / A330 131VU panel

A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…

Pobrania
633
Polubienia
35
Ocena
0
P
PrintablesAku N

RC Tank T-34 PS. 231-1 Part 1 Tracks

I have always been interested in technology and as a child I dreamed of different types of tracked vehicles. During my studies in recent years, I had to study 3d modeling and the school also had a 3d printer at my disposal. I decided to…

Pobrania
631
Polubienia
79
Ocena
0
P
PrintablesGadmek

gopro bike mount 31.8mm with 3 tong

mount for gopro for handlebar

Pobrania
591
Polubienia
64
Ocena
5
P
Printablesthall72
Pobrania
589
Polubienia
67
Ocena
0
P
PrintablesZelloss

Odysseus from Ulysse 31

Based on https://www.thingiverse.com/Kenseiden print https://www.thingiverse.com/thing:1814987 I've added more detail to this iconic starship and sliced it in two parts to ease suporting frames

Pobrania
586
Polubienia
18
Ocena
0
P
Printablesthall72
Pobrania
579
Polubienia
55
Ocena
4
P
Printablesthall72

Lego Compatible (18031.dat) Minifig Sword Longsword with Thick Guard

This model is compatible with the lego system.

Pobrania
576
Polubienia
79
Ocena
5
P

Nozzle for wet vacuum cleaner Ø31 mm

The nozzle is designed to be used to vacuum up liquid/dirt from car seats, matrasses etc. Designed for the model: Biltema Våt- och torrdammsugare WD 1000/15 but the nozzle will fit any vacuum cleaner with a pipe with diameter Ø31 mm. The…

Pobrania
558
Polubienia
47
Ocena
5
P
Printables3DPrintSOS

CR10, Ender Logitech c920, c270, c310, c910 20/20 camera mount system

After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…

Pobrania
551
Polubienia
85
Ocena
4,73
P
PrintablesJerryie

Nissan 300ZX (Z31) kit card

Nissan 300ZX (Z31) Assembly required. Can be printed separately Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of…

Pobrania
549
Polubienia
123
Ocena
5
P
PrintablesJaha

Radius Gauge 31-50mm

Radius gauge for measuring inner and outer radius from objects. Other radius gauges: 1-10mm - https://www.printables.com/model/378121-radius-gauge-1-10mm 11-30mm - https://www.printables.com/model/380852-radius-gauge-11-30mm Assembly: For…

Pobrania
518
Polubienia
92
Ocena
5
P
PrintablesBielo95

Gearbox adjustment tool (VW 3104) Golf 2 gti 16v

Plate needed to adjust the gearbox linkage on a Volkswagen Golf II GTI 16V. Tool VW 3104

Pobrania
511
Polubienia
17
Ocena
0
P
PrintablesRCNet

Tall Feet for Jonsbo D31/D41 Series of Computer Cases.

This is a taller version of the foot from the Jonsbo D31/D41 series of ATX computer cases. The purpose is to increase the gap under the case and improve airflow into the lower intake fans. The gap with the tall feet is now approximately…

Pobrania
509
Polubienia
40
Ocena
0
P
Printablesadcurtin

5.25" rear speaker adapter for BMW 318ti e36 compact e36c

The rear speakers were blown in my car. They're an odd size, and not easy to directly replace. I found there's a bracket, SAK-1203 to mount 5.25" speakers in the rear without modifying the car. Those adapters aren't easily available in…

Pobrania
497
Polubienia
26
Ocena
0
P
Printableshazardous89

Lego Razor Crest UCS 75331 Wall Mount

Secures the Razor Crest to the wall without requiring the set to be modified in any way. Because the top panels and canopy are not secured very well on this set, I would highly suggest hanging the set on the wall without these panels…

Pobrania
492
Polubienia
37
Ocena
0
P
PrintablesInfillTech

SAFILO Tommy Hilfiger TH1831 glasses frame

Hey! Someone stepped on my glasses and broke the frame, so I was forced to make my own temporary frame for the remainder of my waiting time for new glasses. Might help someone out if they have the same problem or they just want to wear 3D…

Pobrania
487
Polubienia
40
Ocena
5
P
Printablesthall72

Lego Compatible (32316.dat) Technic Beam 5

This model is compatible with the lego system.

Pobrania
484
Polubienia
27
Ocena
5
P
PrintablesTri-D

BME280 SHT31 SHT30 SHT3x housing with strain relief

Liked the original and modified it a little

Pobrania
473
Polubienia
39
Ocena
5
P
PrintablesAku N

RC Tank T-34 PS. 231-1 Part 2 wheels and support arms

Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks The Support_arm_S will break if you collide. So it's a good idea to print a spare…

Pobrania
460
Polubienia
54
Ocena
5
P
PrintablesGiwi

LEGO Concorde 10318 Wallmount

This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.

Pobrania
455
Polubienia
31
Ocena
5
P
PrintablesDape

Wing nuts - DIN-315

More free nuts and bolts here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape%2Fengineering_technology%2Fbolts&pk_campaign=PrusaPrinters&pk_kwd=prusaprinters

Pobrania
448
Polubienia
98
Ocena
5
P
PrintablesAku N

RC Tank T-34 PS. 231-1 Part 6 dual differential gearbox

https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks This section…

Pobrania
441
Polubienia
46
Ocena
0
P
Printablesfleaz

IKEA KALLAX Door Gauge 131351

Use this tool to measure the right distance from the front to mount your doors into an IKEA KALLAX.

Pobrania
439
Polubienia
23
Ocena
5
P
Printablesthall72
Pobrania
438
Polubienia
50
Ocena
0
P
PrintablesFanBlox Company

(REMODEL) Articulated Geometry and Rochas313 (Forsaken Roblox Figure)

Both Rochas313 and Geometry John Doe Skins for the silly fans. :3 Print in PETG or get IMPLAED. Or tree'd idk. (MEGA-UPDATE 11/21/25: Added new joint design)

Pobrania
430
Polubienia
36
Ocena
5
P
PrintablesGDY

Logitech C 310 camera holder for flashforge adventurer 5m

The holder is suitable for all cameras like the Logitech C 310 and consists of three parts, an attachment to the printer itself, an extension cord and a camera mount. All this is connected by two bolts with M3 nuts 30 mm long. There are…

Pobrania
429
Polubienia
71
Ocena
5
P
PrintablesWelshShooting

Swiss K31 Charger

-- REMIX -- 6 round charger for Swiss K31 (7.5x55 Swiss)

Pobrania
428
Polubienia
23
Ocena
5
P
PrintablesModel Magic

Frankenstein - 1931 - Universal Monsters

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
428
Polubienia
66
Ocena
5
P
Printablespdx930

Garmin Varia Seatpost Mount for 31.6 post @ 72 deg

This is a mount for the Garmin Varia 715 light for mounting directly to the seatpost. Needs a separate insert from k-edge (K13-504 https://k-edge.com/shop/computer-mounts/garmin-mounts/replacement-garmin-insert-kit/), and a single M5x18mm…

Pobrania
424
Polubienia
38
Ocena
5
P
PrintablesAviation Design

Dell Chromebook Key (3100 2-in-1)

My friend uses a Chromebook and his quote key ( " ) fell off somewhere. This key can replace any of the main square keys. Feel free to remix and add letters to replace specific key or fix to your size. Also works with any computer that…

Pobrania
419
Polubienia
12
Ocena
2
P
Printablesthall72

Lego Compatible (62531.dat) Technic Panel Smooth 11 x 2 x 3

This model is compatible with the lego system.

Pobrania
419
Polubienia
55
Ocena
5

Rex 1:8 scale - Rollback Rear Section - 1:8 scale 6x6 (131pcs.)

Rex - Rollback Rear Section - 1:8 scale 6x6 Read Carefully! - Rex is a modular truck system - This post is for the rollback section. More option to come - All the STL files you need to build the rollback truck is here free on…

Pobrania
414
Polubienia
162
Ocena
5
P
PrintablesAdam

Extension nozzle for portable turbo jet fan X3 F31

This extension nozzle attaches to some common handheld turbo jet fans (tested with X3 and F31): https://www.aliexpress.com/item/1005007494745014.html https://www.aliexpress.com/item/1005007075159534.html You can see my model (orange) next…

Pobrania
413
Polubienia
49
Ocena
0
P
Printablestato_713

Samsung Galaxy A31 a315 case

Originally published here: Samsung Galaxy A31 a315 case by tato_713 - Thingiverse Thanks to Theo Schinca , who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models…

Pobrania
409
Polubienia
13
Ocena
5
P
Printablescyberbobcity

Magnetic Socket Organizer for the Tekton SKT15311 74-Piece Socket Set

I built this to use on my French cleat wall. There was not a magnetic organizer that exactly fit my Tekton socket set, so I made one. I combined it with some ½" plywood, some bar and cup magnets from Amazon and made a wall mounted socket…

Pobrania
405
Polubienia
91
Ocena
5
P
Printables3DPTR

Netgear GS316/EP Switch 19" Rack Mounting Brackets

This is rack mount tabs for a Netgear GS316 series switch. The rear bracket uses M3 screws to replace the existing screws in the back of the switch.

Pobrania
405
Polubienia
29
Ocena
5
P
Printablesthall72

Lego Compatible (73109.dat) Technic Brick 1 x 2 with Plate 1 x 2

This model is compatible with the lego system.

Pobrania
402
Polubienia
28
Ocena
0
P
Printableshorcicaa

Pallet for Siku 1311 Forklift truck

Siku 1311 Forklift truck (1:87 toy model) comes with one pallet. That is not enough for any kid 😉

Pobrania
401
Polubienia
53
Ocena
4,5