121 modeli
This is a remix to accommodate the larger size bottle (4 fl oz, 118 ml). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG White Category: Household
small 3x4 spice rack for cupboard organization. Uses 4oz square spice jars https://www.amazon.ca/gp/product/B077T2252Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Print instructions PLA works fine pirnt at .30mm for quicker print.…
Here’s a quick model for a 14oz Yeti Rambler mug (approximately 100mm diameter at the base). I couldn’t find one that worked for my needs, so I designed this to fit nicely in the 2024 Ford Escape cupholders. The model is based on the…
Here's a a few simple boots for 64oz, 32-40oz and 12-20oz Hydro Flasks. There is also a version for the narrow top Hydro Flask and the Tumbler Hydro Flask . Please note, this MUST be printed in TPU to fit as rigid filaments will not work.…
This is a TAL Ranger lid, it fits the 18, 40 and 64oz bottles, it is designed to use the o-ring that is in the original lid. 2 models will be uploaded, one I added ribs and a D-ring hole to hook to something and the other is smooth with…
Designed this adapter for my Yeti Rambler mug because I was tired of not having anywhere to put it in my car. Should fit most cupholders, and the hole in the middle allows for some cans to still use the cupholder. Print in ABS or PETG so…
We got a 14oz Stanley tumbler for my daughter for Christmas (so she could be like her big sister) but knowing how clumsy all 5 year olds are we decided it needed a handle. We didn't want to pay the $15 for the only version we found on…
Bottle boot designed for 24Oz Owala FreeSip bottle. 2 available heights. Printed with overture clear TPU on Bambulab P1s. Very tight tolerance so that the bottle boot does not fall off. The model also includes a hole at the bottom to…
Multiboard Push-Fit Super Lube 22oz (41.5mm) Holder.
YETI Dog Bowl Riser Stand for 64oz or 66oz bowls Raises bowl about 230mm at bottom, model itself is 250mm tall print upside down, only needs supports for the indented part where the bowl will go Included is a piece that allows 2 stands to…
Needed Supplies: (1) Screw Driver or Allen Key (1) M6x12 or M6x20 Screw
Simple 4 oz cup. I use them for espresso. Easily stackable. Used dish soap to release mold, but still more of a one-off mold, may work better with mold release or cooking oil spray.
One, two, and three 34oz Loctite bottle holder. I cleaned up file a little bit. I was very new to CAD when first drawn. It is 4 mm taller. I also still included the model with the lip. Please post your makes and let me know how it worked…
Protect your 24oz Owala bottle with a perfectly fitting boot , created from a 3D scan. Its tight design ensures it stays securely in place . Start with a 99% scale for a snug press fit, and fine-tune for your 3D Printer and/or material.…
Yeti drink bottle holder for the 64oz. Holder can bolt to a 55mm post
Cupholder adapter for 64oz Takeya steel waterbottle 1 piece print with no supports Printed in PETG since it will be used in a hot car Dimensions: Section that goes into cupholder: h=2.500in, d_outer=3.180in Section that waterbottle slides…
Was originally designed for a late model Honda Ridgeline/Pilot. However it seems to fit others great. Currently using in a Jeep Grand Cherokee. I do not recommend PLA since it will warp on hot days in the car. PETG has held up great for…
The 24oz Owala FreeSip claims compatibility with “most” cupholders; my van apparently doesn't fit the definition of “most”. If you also have a 2018 (or possibly any 5th gen) Honda Odyssey and don't want to just put your FreeSip in…
Feed wild birds with this bird feeder that attaches to a 2 or 1.89 (64oz) liter bottle. rivet a chain to a bottle for a secure hold. I also attached a 2 and 1.89 liter bottle funnel. Use no top or bottom layers and a high infill (75%+) to…
Jig/assembly/adaptor to allow you to print on a 24oz Ozark Trail bottle using the rotary bed on the Eufymake E1 UV printer.
I recommend hand washing only for this part. I printed mine in ASA, but there may be some higher temp filaments that could survive the dishwasher.
A quick and dirty remix of TezlaKoilz vertical 4oz glue holder to fit on a 2x1 Gridfinity base
It's a boot to protect the bottom of your 24oz Owala bottle. I printed it in TPU with a .6mm nozzle. 4 bottom layers, 3 walls, 0 top layers, 0% infill. If your running .4mm nozzle I would try 5 walls or making the diameter slightly…
Reinforced replacement handle for TAL 64oz water bottles
This print fill will create two sizes of flat pack bobbin for Spinoloution yarn spinning wheels. Flat pack bobbins are easier to store for travel as they can be disassembled into 3 pieces. When printing you can chose what size to print…
The 4oz D Ration was the primary US survival ration during and post World War 2. It was produced from 1937 to 1946. This model is designed to be used in museums and displays at it has accurate dimensions and silhouette.
⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…
A quick model for the 14oz yeti mug and a phone holder that can be used to fit onto any t-slot rail. I used ¼-20x ½" socket caps, although the socket caps stick up slightly but no damage was done to my yeti. The phone holder has drain…
This is a spinning wheel bobbin designed for use on an Ashford Joy wheel, but it fits any Ashford spinning wheel that uses their standard bobbin. This design is for your everyday spindle. It still holds more than the wood ashford bobbins,…
The original model did not work with a 1.9L/64oz Mason jar. This fits snug, so it won't slide off. Print body in vase mode
Protective boot for a 64oz Hydro Flask. Print with 10% infil gyroid. Print instructions Category: Household Summary Protective boot for a 64oz Hydro Flask. Print with 10% infil gyroid. Print Settings Printer Brand: Creality Printer: Ender…
This is a bottle cage designed to accept the 24-ounce Owala bottle. The Owala bottle is extremely heavy, lacks any ridges to retain it by, is very tall compared to a typical sports bottle, and it needs extra vertical space in order to be…
Rings print with no supports. Handle can print without on a dialed in printer, however, adding supports only means you need a little clean up if you want that assurance of no dangle strings. Multiple sizes available to accommodate slight…
Cup holder adapter to fit the large XPAC 64oz insulated tumbler in a Model 3 cup holder.
The base of the extension is measured off the large cup holder in a 2001 Jeep Grand Cherokee.
Lost the protective sleeve for my Takeya 24oz water bottle, so I modeled a new one to print in TPU. It works great! Printed in TPU 95a with 4 walls and 25% infill so the padded bottom has some give but not too much.
Sleeve to protect the bottom of the bottle from scratches. Print in flex filament, I used old Sainsmart TPU I had on hand. This fits the 14, 18, and 22oz bottles, larger ones have a bigger circumference and will not fit. Print…
I designed this o-ring to be printed out of TPU and tucked into this lid designed for the TAL ranger pro by Dznutz. It should also work with the original lid.
• Material: Printed using ASA filament for enhanced durability and dishwasher safety. • Print Settings: Utilized a 0.4mm nozzle with a 0.2mm layer height for optimal print quality.
This is just a simple shroud for a large yeti water bottle. it can be make in either TPU or PLA but we got better results with the PLA but that could be due to my quality of TPU (amazon basics...) UPDATE: tightened the tolerance of the…
I've created a few different bottle holders for my daughter's bottles and a friend's baby bottles. As you can see from the picture, I customized the design with her name, it's fairly easy to do in Tinkercad. Breastflow 6oz bottle has a…
These cups from GFS come in long flappy sleeves that are a bit unwieldly to deal with, especially since it usually takes us a few years to get through them. This caddy keeps them constrained and out of the way without scattering…
Quick draft to try out the idea. The opening is very slightly flared internally to grip the lip of the can. I printed in TPU 95A with 0.28 layers and it fits just right. We're using several of these now, and I found 101% scale works even…
I printed this with Amazon basics TPU. https://www.amazon.ca/gp/product/B07H9KNPNL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed with supports everywhere (even though they are a pain to get off) This STL will need supports for…
Modified 20oz Rambler Holder by theihdes to support 30oz tumblers and 14oz coffee mugs on the Snapmaker rotary module Category: 3D Printer Accessories
This is a drying rack for 2 Owala bottles. If you are like me, your wife and daughter can't live without their new water bottles. But they have to be cleaned and dried. Well, that's my job. I usually create a Tetris tower of drying…
extra tall with logo cutout
Simple remix to allow you to add a small 4oz ball peen hammer to your Modular Tool Rail. I believe that I used the deburring tool holder as the basis for this remix.
This is an extremely large print for (2012) Audi A3 owners (maybe other Audi's as well) to drop into the two-stage cup holder size we have. 207.50mm (X) × 200mm (Y) × 217.40mm (Z). It's off-center 7.5mm to move it slightly toward the…
Holder for paint and paint brushes. The main holder fits 4oz liquitex tubes. The multi-size should fit the smaller tubes but I didn't have any on-hand to test it out. I glued the handle onto the base with 5-min epoxy.
I created this model to better help with bottle storage in the fridge (especially if you need to keep track of the order to use them in). Will hold 4 of the 4oz (small) bottles. I printed in PETG but this could really be printed in PLA…
small stand for drying baby bottles. Pla works fine I printed this at .28
Cup&Cino Becherhalter Paper Cupholder 20oz - 590ml 12oz - 300ml 4oz - 120ml
A cupholder solution for your 64oz Hydro Flask in a Jeep Wrangler JL/JLU! A 64oz Hydro Flask doesn't fit into either of the the cupholder compartments of a Jeep Wrangler JL/JLU due to the water bottle's enormous 4.72in diameter. Unlike…
This PETG burger press is designed to help you achieve restaurant-quality results at home. Accommodates 4oz of ground 80/20 ground beef Key Features & Benefits Anti-Bulge Technology: The press features an optional bottom dome on the base…
Createx 4oz or (43mm diameter) bottle holders for the Honeycomb Wall System. Each rack will hold 4 bottles. and has 3 wall attachments to prevent sagging if loaded with heavy paints. Print in the orientation provided with at least 4…
This is one of those projects that started off as a modeling exercise and turned into something usable. This mug holds about 3.25 cups of liquid, although 24oz is probably as close as you can get if you figure in ice, etc. When printed at…
BRUMATE 12oz to 8.4oz Mini Can Adapter This little adapter allows you to enjoy your mini cans in your BRUMATE . (Amazon Affiliate Link, Thank you!) Especially works well with the little Alani energy cans :) 8.4oz slim cans ~250ml Enjoy!
Remixed from https://www.thingiverse.com/thing:4600530 This plug fits the drinking hole in the 16oz Yeti Rambler cup. GF Complained of the cup sloshing tea all over her car, so this is the easy solution. Works well! Print Settings Printer…
14oz yeti ramble car cup holder adapter for my 2018 ford fusion
Creating a bar for a museum display, wanted one with a bite taken, original design by Alan G
Who needs a handle? It IS a handle! Introducing the Slim Screwdriver Handle 8.4oz Can Cup; A Remix of Blank Can Cup RETURNS! by MandicReally . Designed to hold slim 8.4oz cans. If you like this model, please give it a like and be sure to…
I dropped my full 24oz hydroflask and damaged the base enough that it would not sit flat on any surface. It was like a weeble-wobble. After adding the boot, the bottle is stable again. I printed this out of Eryone 95A TPU on a MK4S using…
Keep your Hydro Flask 24oz bottle safe with these durable TPU bumpers designed for the top and bottom sections. They protect against scuffs, scratches, and dents while maintaining a sleek look. Features: Custom fit for Hydro Flask 24oz.…
If you have kids with eczema you probably have this stuff in the med cabinet. A little bit goes a long way but the kids eventually drop it and the lid breaks, so make yourself a new lid on the cheap..
For the top of the Yeti its a mostly snug fit. (Yeti Bottom in Blue also in Pic)
There are several of these out and about but none fit my needs so I designed this one. I wanted something with a wide base to prevent tip over and catch drips. I wanted the bottle to slide in and out easily. Most importantly, since I…
Use this holder for the Dr. Brown's narrow glass baby bottles. It works great if you want to use the glass bottles for pumping breast milk without the bottles falling over when setting them down.
A simple holder for the YETI Rambler 14oz version. Fits in the middle of the cup holder of the Skoda Fabia Mk2 (2007-2014). Print instructions: Lay flat upside down (big side down) Has to be printed with supports Settings: 0.15mm PETG…
Did you break the handle on that great 64oz growler / water bottle you got at ALDI or maybe on Amazon? Use this model to print a replacement. The handle is attached to the growler's lid with a metal pin you can poke and pull out using a…
This model is pretty user specific and it was designed to work with the Yeti 14oz Rambler cup holder adapter linked here. The Bracket clamps around any 1" diameter pipe with a bolt and nut. This part got me through my Achilles tear…
Lid for large (24oz) Ninja Creami. Recommend printing using flexible filament such as PLA or TPE. After having printed a couple of these I don't think it needs to be as thick as I have made the side. Find solid model attached if you would…
Large Water Bottle Car Adapter 64oz
Simple holder for HydroFlask. My bottle is often on the floor next to the work table. So that the bottle does not fall over so quickly when you accidentally nudge it, I have printed out this holder. Inner diamater 73mm. Printing : I…
A boot for the 64oz Iron Flask, 125mm ID, printed in Bambu TPU 95A HF. Printed with 3 walls and 15% hexagon infill. Prints fast, uses little TPU, works like a charm and fits perfectly.
V-Slot 0.24OZ Glue Stick Holder.
Mason jar funnel for 24oz jar
Leak-proof bottle boot that is for a 24 oz bottle great part or upgrade for your bottle.
Boot made for Cafezi 64oz water bottle Printed in TPU
A simple TPU bottom for a 14oz YETI rambler. I didn't like the clanging noise the cup made when setting it on a stone countertop. It also makes the cup not slide as easy on smooth surfaces. Necessary, absolutely not, but it scratches an…
I messed up the measurements in Solidworks by a factor 10. So import this model in your 3D-slicer and resize to 10% . Once resized, you might want to add supports for the hand/carabiner hold . I haven't tried printing without. I designed…
I got frustrated with how poorly my 24oz Bubba coffee mug fit in my wife's car so I designed an adaptor. Hers is a 2018 Forester but it probably works for 2014-2018 model years and possibly other Subaru vehicles. Support structure…
Uses the existing indentation to fashion a band that has a hole to attach things to it. Secured with M3 socket cap bolt and nut. Attaches to: THERMOS Stainless King Vacuum-Insulated Food Jar, 24 Ounce, Army Green
A suspended capsule that fits in a 4oz deli cup, with very small gaps that allows slime mold to escape. This is useful for providing slime mold to small invertebrates that eat it. You put some slime-covered oats in the capsule, screw on…
Model is 10in (254mm) x 7in (177.80mm) with a depth of 20mm. The model can hold 12 4oz bottles of craft glue. The model shown was printed with: Generic PLA 10-15% infill no supports no brim This is a great model for teachers and crafters…
Made to hold a 24oz Stanley Coffee Mug off the side of your desk. It can mount to a desk top up to a 40 mm thick. The bolt is also very deep. My desk sits on a metal frame so it's difficult to mount things to the side so the bolt starts…
Printed in TPU using a Bambu Lab P1P. Supports needed for design.
I have a narrow cabinet above the Keurig coffee maker just for tumblers. To keep things organized, I designed a simple two-part print that mounts right onto the cabinet door — it’s perfect for stashing Tervis brand 24-oz lids out of the…
This is a koozie for 8.4oz redbull cans that is meant to be printed in TPU or any flexible. I used Siraya Roamr TPU Air 80A, and printed at 260C for maximum foaming
A simple adapter to use an Aerogarden pod in a 64oz Mason jar.
Thermos 24oz handle. Printed with ASA. Still figuring out what the best angle to print this at. I printed this with flat with organic supports and 6 walls at 15 infill. It is a little tight so I would widen it on PrusaSlicer about 1% or…
These covers should fit Simplehuman's 14oz sensor pumps pretty much the same as the original covers. Easily modified in your desired slicer program to add a debossed or embossed label for side by side pumps.
Holds 4 oz glass square spice / seasoning containers. Printable with no supports. Containers I used: https://a.co/d/0d3oSkaY Designed in FreeCAD. Feel free to request other layouts in the comments.
A fix for the under armour 24 oz bottle carabiner. The metal parts like the spring fit snugly with a bit of force :D
Gridfinity bin for 4oz Zap-a-Gap CA glue. The bottle is actually 42mm diameter, so it was basically designed with gridfinity in mind!
I got the Manna 64 oz growler with 4 cups from Costco and its great to be able to have 4 cups together with a large thermos. However the cups are quite thin and get a bit hot to hold without the handle so this solved my problem of burnt…
Bottle handle fix for 64oz glass water bottle. I would recommend printing in a strong filament, such as PC/ABS. The bottle cap insert is what interfaces with the inside of the bearing/bottle cap and the handle fix interfaces with the…
I lost the little rubbery grip around my 24oz Takeya Water Bottle. I have no idea if other people lose these- you basically never take them off except to clean them. I printed this with some cheap Amazon TPU filament and this came out…
These sleeves go around your drink and create a thumb rest, making it easier to hold for long periods. The long green one has hollow pads that give it a squishy feel. The short black one is more rigid. I made these for SimpleModern 24oz…
Tested for capacity ✅ printed at 15% infill and has held up. Overhanging handles will need to be supported.
