969 modeli
This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko. It is increased by 150% (for 5cm tape), the wings are clipped a bit and the bottom is flattened for better bed adhesion. Print instructions…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
YubiKey 5C NFC Case/Keychain (USB C only) I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them. It is intended to use case cap as main holder of the key…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I cant take credit for this, all I did was scale Decibel's awesome stem model on the x and y to fit the 5cm version of Lytta's beautiful spiral vase rose. I left the Z at Decibel's original hight to have a long stem. All credit really…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
Wydruk około 44,82 €–54,78 € nettoWstępna wycena jednego wariantu
The Yubikey 5 NFC and Yubikey 5C NFC have slightly different dimensions which is why there are two different designs. The Fusion 360 parameters can be adjusted to accommodate other models. The cap fits on the key one direction with a…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Haku (Miyazaki) 🐲 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my Patreon .
Wydruk około 8,96 €–10,95 € nettoWstępna wycena jednego wariantu
Never let your yubikey without protection ! Use this cover instead ! This model is designed for Yubikey 5C NFC (the USB-C version). I couldn't find exactly what i was looking for so I decided to create my own model. I printed it in PLA…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This item will protect your YubiKey 5C USB-C device. It has nubs to keep the YubiKey in place for storage and won't come out. No supports or brim needed for my successful print. Print with flat bottom on print bed. I went through a few…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This enclosure is based upon the Prusa Printer Enclosure V2 – with MMU2S support. https://www.prusaprinters.org/prints/3673-prusa-printer-enclosure-v2-with-mmu2s-support I wanted to have a tall enclosure to be able to keep the spool…
Wydruk około 16,55 €–20,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
A simple mount to attach a yubikey 5C NFC to your desk with this yootech usb-c to usb adapter. Use a dab of epoxy to secure the adapter in place, it's a pretty tight fit.
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
3D model of a Viking axe adorned with intricate ornaments, showcasing a blend of historical and artistic detail
Wydruk około 4,96 €–6,06 € nettoWstępna wycena jednego wariantu
Simple caliper holder with slots for 2 15cm (6 inch) scales. Just took a picture of my calipers, imported into F360, and traced. Easy. And I rounded the corners a little more than normal to make is fit on my MK4 build plate - yes, a 6x2…
Wydruk około 7,27 €–8,88 € nettoWstępna wycena jednego wariantu
More large robot prints are comming up :) …. This one is based on a the cover art of the SciFi novel “Isaac Asimov's Robot City”. In Particular the German version of the first book of this series “Die Odyssee”. The book appeared in 1988…
Wydruk około 22,22 €–27,16 € nettoWstępna wycena jednego wariantu
All the credit for this excellent design goes to @Teraflop .
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
After removing the original venturi tube out of the airbox, i designed a grill to cover up the hole and to protect the air filter. It has the same contour as the original tube and can be attached with the original screws. It should fit to…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mounting Frame for e-Cigarette Mods using DNA75C Board by Evolv LLC.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Added two versions. Both have the same dimensions (14cm x 8cm x 15cm), only the wall thickness is different. Normal 2mm Slim 1mm
Wydruk około 8,85 €–10,82 € nettoWstępna wycena jednego wariantu
This is a versy specific model as it was made to fit an SV705C astro camera that doesn't come with a fan by default. The mount provides special clamping points to mount a special fan onto it while also providing a cable comb for cable…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
Holder for a 3.5cm standard headphone speaker. Model has two slots for zip ties. Can be used for Xbox 360 sonus mod. Cura indicates model errors, but everything prints fine, I just suck at blender. Supports may be needed on bed only for…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
You have to have the gripper attachment.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…
Category: Toys & Games
Follow me on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ Pinterest ❤ Haku (Miyazaki) 🐲 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ After a successful print, rinse with water for a smoother finish. The Mini Pocket Slide Box (25mm Tall) offers expanded storage while maintaining its compact and…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are…
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…
If you like the model, give it a ❤ and download it, thanks- Pokud se vám model líbí, dejte mu ❤ a stáhněte si ho, díky For better results, I recommend adding supports
I could not find a proper scaled lamp shade for the Ikea Fado in the style of the Death star, so i remixed one. Print it in transparent filament. ---- www.jprint.dk Facebook, Instagram, Twitter - @jprintdk Print Settings Printer: BambuLab…
This model is compatible with the lego system.
I created it for my dad and thought it might be useful for others. There's a long finger one and a short finger one. Print instructions Change infill→fill angle from 45° (default) to 83° #edited 20231020
Another great model uploaded to https://3dwarehouse.sketchup.com/search.html?q=starwars&backendClass=entity as a free download I like this model, but I'm guessing at about 5 - 10 kg's in plastic and 8 months to print. I might just shrink…
Addition 3 Nov 2023 : Redesign : File Name AnkerMake M5C Bin V2 Added a Taller wall to prevent bits flying over the edge. increased width by 5mm to go under the build plate a bit more. changed rear design to better fit the AnkerMake Mast.…
Two color design The base has interlocking cut outs for the rings, which are supposed to be printed in another color. If you only have one color, or you just want to print it as one piece, please use the one color model. One color design…
The original model provided by blinkz did not work on a 765 CFM so I re-modeled it with the proper dimensions. Part is already oriented for optimal strength. Buy me a coffee If you like my work, you can buy me a coffee !
Description Cute but practical dog food scoops to measure out an expected amount of food/kibble. Available in 3 sizes. Although visually similar to the earlier version (minus the handle changes), this version is completely redesigned from…
Jack-O' Valentine is a major character in the Guilty Gear series. She is one of the three servants of That Man, alongside Raven and I-No. Her past is shrouded in mystery, and her own memories are vague. Because her awakening remains…
Verry small 5cm mini spiral cone fidget is beautiful :-) perfektní pohyb pro relaxaci a antistress :-) Do you like the model? Like, download and print :-) thanks Líbí se ti model ? Dej like, stáhni a vytiskni :-) díky jde tisknout z PLA i…
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
Popis Box with handle - outer max dimension 108x125x54mm - inner max dimension 100x100x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°)…
This is a tripod. Compact when folded - diameter is 4cm (38mm) and length is 17.5cm, extends to 45cm, manages to hold a smartphone (around 250g) + 1.5kg weight while fully extended (and 3kg+ when not fully extended), though I wouldn't…
This is a scale version of a wind turbine approximately around 1:100 The rotor is connected to the nacelle with a 608 bearing Print all parts once except for blade print this 3 times. Everything should just press together, although…
I wanted to make a nice sleeve for my YubiKey so thats what I did. I measured the key with calipers to get the dimensions. If you want the Yubikey 5C NFC cad model check out my model found here:…
These raisers are made for the GraviTrax Junior marble tracks to raise the tracks for longer runs
Spherical bearing Z joint for Voron 2.4 Update 11-11-2023: Slightly adjusted models per feedback. Github for up to date models Why ? Unlike Hartk's GE5C mod, this has no offset mounting to the A/B drives or front idlers, meaning it's a…
After implementing the vibration reducer feet on my 3D printer, I have noticed a substancial reduction in the amount of vibrations that the printer generates. In fact, my tests have shown that the feet are able to reduce vibrations from…
A Utility box for the AnkerMake M5C to match the Filament waste box AnkerMake M5C waste box V2 by Peter Martin | Download free STL model | Printables.com Size 160mm x 80mm x 25mm approx 2hour precision print with 20% infill.
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
I ran the printer for a while without the filament guide, and when retracting, it made the spool bounce around a little more than I was comfortable with. I built this as an alternative to the top guide provided with the printer. You can…
K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are…
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
It is recommended to print it twice for better stability on the printer. This is a compact and well designed holder for your AnkerMake M5C Tool Kit. It is just the right way to store your tool kit with your new best friend (3D-printer).…
This holder fits an Apple Airtag and a Yubico Yubikey 5C NFC and should fit the most wallets. Print exactly like defined in the 3mf. I recommend to use PLA as you need the holder to bend a little when inserting the Airtag. If you like you…
Tweezers for aquaristics. Ideal for planting flowers
Malá úprava zakladace. Přidány díry na šrouby s a sražený roh. Jedna verze je pouze s dírami na šrouby. Velikost díry je 2,5mm
Super simple storage box. Why do complicated when you can do simple? They can be snapped together in infinite row. Snap lid. No support, fast print. Hold well ! 1mm thick wall, 5x5x5cm
I'd been wanting a camera to remotely monitor my AnkerMake M5C remotely for a while, so I created one. I have a lot of cheap, lightweight Wyze cameras and generally like them. It sits on the top of the right side gantry and supports: -…
Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer. Wrap the wires around the built-in battery holder…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design → this post (…
Hold 7 spools of 1kg filament. You need 2 x Arm 2 x Stange 2 x Kappe 1 x Verbinder Printed wither Ankermake M5C, PLA+, Fast Mode
Swivel wheel. Diameter 5cm, 2cm depth, to use with bolts to fasten. Required hardware (per wheel): 608 bearing 1x (can also use 2x) metal or https://www.printables.com/model/541192-print-in-place-bearings M5x30mm + 2x nuts + 1 washer,…
Simple set of cookie cutters. In STLs there is a set to be printed, or use the individual sizes as you like. Jednoduchá sada vykrajovátek na cokoli potřebujete. STL je tam jedno velké, s celým setem a potom i jednotlivé velikosti.…
Standalone shell for the YubiKey 5C (NFC) hardware key.
I'd been wanting a camera to remotely monitor my AnkerMake M5C remotely for a while, so I created one. I have a lot of cheap, lightweight Wyze cameras and generally like them. It sits on the top of the right side gantry and supports: -…
Best for printing and storing.
This model is an Extension with a straight tunnel. It is compatible with the Gravitrax Junior Marble Run. I optimzied this model: https://www.printables.com/model/744471-gravitrax-junior-compatible-tunel I used the tolerances of this…
Now you can have a “display“ on your AnkerMake M5C. For quickly checking the progress on your print, or to tune some settings. This model can be attached on the right z-axis of your AnkerMake M5C. It has a pass thru for a charging cable.
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
To simplify the filament change I have designed the NoTube Filament Guide for the M5C. With this you can remove the original filament tube so you can use wider filament rolls on the original holder and don't have to deal with the tube…
Very simple, its a credit card sized piece of plastic, with a cutout for a Yubikey 5C NFC. I printed my example out of Orange Microcenter ASA with a .1mm layer height, 6 permieters, and 20% infill, on my Creality K1.
I'm using my M5C with the filament spool at the rear and the included filament guide doesn't work well with it. I really like the original model by just_trey so i made a remix that works better with rear mounted spools. There are two…
The YubiKey 5C is a great two-factor security key. It's very small & compact and perfect for modern laptops & most smartphones. It can be attached to a key ring with your other keys so you always have it at hand. However, the bare usb-c…
The power supply mount is compatible with the 36V 2A PSU model SOY-3600200US-306 which comes with Govee RGBIC LED Permanent Outdoor Lights models H705A, H705B, and H705C. The controller mount is compatible with the aforementioned models.…
An editable Yubikey holder. 3D Render: https://collaborate.shapr3d.com/v/9ep5VZ-zgFJwerQf3cj7l This is based on the idea of this design https://www.thingiverse.com/thing:5156027/files
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
Flush Z-axis mount for the Ankermake M5c external screen using the original Ankermake display casing made by Three Wu in the Ankermake app (Makeitreal) Supports: Yes
I recently discovered Zach Freedman's open Gridfinity standard and love it. I saw a post on recently for a shelf for the M5 and wanted something to put my spare nozzles, hot end, and silicone socks in using the Gridfinity standard. So I…
This is inspired by snap fit cases that I've seen for Raspberry Pis. None of them were an exact fit, so I made this one from scratch.
Someone’s probably designed these already, but I felt the lip of the spool holder was a little smaller than I’d like it to be…so I cooked this branded spool holder cap up. Should fit snugly over the end of the spool holder on AnkerMake…
These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…
These are two rulers perpendicular to each other, also known as a square measure! You can use this 90 degree ruler in many ways, such as drawing or measuring something. Everything is labelled with an extra layer, you can add a filament…
I call it the “eco” version because I tried to design a frame (though visually a solid as the first one) that needs significantly less material to print. Having set infill to 5% you need only 56g of PLA. Furthermore I added mat and back…
Customized version of https://www.thingiverse.com/thing:1902359 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1902359 Instructions Using the following options: RulerLength = 15 Unit = centimeters…
ENG version : Gingerbread House Cookie Cutter as collection 16x17x14cm is not only for X-mas. All models are in 3mf for MK3S+, MINI+ and STL for other FDM. Collection : Front side, Back side, Roof, Side, Floor, Big&Small Window Material :…
Summary This was designed to hold a GoPro camera at a 90 degree angle on the right z-axis of an AnkerMake M5C for timelapses. The GoPro mount was remixed from this mount but has been scaled up by 2% to fit better. Note: While designed to…
The carrier-based variant of the F-35 fighter jet (imho those larger wings give it much better looks than the A and B models). Like my other kits, modeled at a scale of 1:150 (10,5 cm)
75cm high wind-mill model with motor works great as indoor fan with an gear motor I used a maxon 24V gearmotor with Dia22mm and 4mm shaft In my version all printed in PLA without support fits within a 19cm x 19cm print bed (diagonally) (I…
90° adapter for air conditioners. Hose diameter is 15cm . The bottom is flattened to fit my BambuLab printer and print faster. Have to the original in terms of wind speed only 0.2m/s loss (original 9.6m/s - 90° adapter 9.4m/s). Please…
ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]
Stem for 5cm Spiral Vase Rose with bottom by lytta. It has three different parts: “Leaves”, “Receptacle”, and “Stem”. Printing I printed all of the parts with 3 walls, 3 tops and 3 bottoms using lightning infill. I used a heat gun (a hair…
Light Bar for Ankermake M5C. Inspiration from Dean_62 for the model for Ankermake M5. I basically remixed the whole thing. The mount was too small (apparently the crossbar is bigger on the M5C and the light bracket was also modified due…
Designed in Fusion 360, simple flower pot with spiral decoration. Drainage hole in the bottom. Fitting saucer. Does not leak from sides. I have designed more sizes - diameters 10, 12 and 15cm. Also available 12cm without hole Print with…
a keychain container for YubiKey 5c nano I found the loose cover suitable to PLA and the tight for PETG
There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…
"Winter is coming" 0.1mm - layer 3 filament changes Category: Signs & Logos
![ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]](https://media.printables.com/media/prints/803596/images/6220234_304b43ac-eb9d-44ae-ab04-887339741e1b_2b323069-321d-4bba-b47a-411db5d91489/esp32case2.png)
