884 modeli
This is a practical, printed 608 Bearing suitable for many DIY projects (for example in a spool holder). It is a fully functional roller bearing with a proper working cage. It runs like a real bearing with a smooth action, tight fit & low…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
This is a print-in-place 608 bearing with 8x 5mm ball-rollers separated with distancers. I made it using ±0.1mm tolerances, as all the other models that I found either were too wobbly due to higher tolerances, or were difficult and…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a vase mode print I designed to hold 2 18650 cells as well as a TP4056 charge/protection circuit & MT3608 DC-DC boost circuit. Here's the link to where I bought the circuits from. https://a.aliexpress.com/_mNJGjrV 0.2mm layer…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
I remixed the original model to use a 608-2RS bearing instead of the original 609
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
Starmie the spinner with stand. Using 608 ball bearing, if you dont have one try print 608D.STL Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought the wrong bearings, so I changed another remix to fit my bearings.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In my search for a Gridfinity solution to organize my 608 bearings, I discovered one that meets my needs. However, I've faced a problem where PrusaSlicer begins printing the screw holes suspended in the air. To remedy this, I've added…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
This is not an easy print. Your printer MUST be dialed in well. If you aren’t sure about your printers tolerance abilities, print this first- https://www.prusaprinters.org/prints/127569-s-shaped-tolerance-test-01-04mm-in-002mm-increment…
This is a very simple, very fast to print bearing made of three interlocking rings which print in place. You can use it as a drop-in replacement for ordinary skateboard bearings, but because it relies on sliding rather than rolling…
Versions: V2, 10/18/2022: Fixed inner diameter to match 608 specification. Added extreme tolerances for perfectionists. Unfortunately, "Bearing.stl" is something you can't just download and print. Most of the time it won't work properly…
Filament Spool Roller w/ 608 bearings - Snapped together and no bolts - Linear Alignment Rail Remix of https://www.thingiverse.com/thing:2185015 EDIT-8/11: Tolerances of Rail have been adjusted. Tested with a layer height of 0.15mm…
This 608 bearing is fully printable, robust, reliable, somewhat dust/dirtproof and easy to assemble. Since filament has a tight tolleranced outer diameter, it makes for the perfect roller in this bearing. Even if your printer has its…
Printed bearing with no balls or assembly, easy to print with no supports. I saw another one like this on Thingiverse but the curve was the other way around which made me feel like it would be less stable. Print Settings Rafts: No…
Printed on Prusa Mini+ Nozzle 0.4, PLA 0.07 ultradetail mode (0.1-0.12 should works too) Please set the flow for 90% Print it slow! 20-25mm maximum is recommended. Dimensions: 8x22x7mm You like it? You can buy me a coffee 😉…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
Download different models based on your 3D printer's tolerances. My printer starts spinning 0.2 when all the parts are properly separated. If rings are really stuck, take a small screw driver to separate them carefully. You might need to…
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
Another 608zz bearing that works for my personal use when i am out of metal ones PLA stl have bigger tolerance and i print it in PLA ABS stl have lower tolerance and is printed in ABS Printed on Bambu P1S 0.2mm layer, 3 walls, 15% infill
I downloaded and printed many 608 bearings. None of them satisfied me. Half printed balls were flying around in my printer or the bearing had too much play or other problems. So, after a lot of experimenting, drawing, test printing and…
The Prusa Roller is the name of a new filament unwinding tool which fits all common filament rolls. It has been designed so that the extruder has to overcome as little rolling resistance as possible. My motivation for designing the Prusa…
Based on the Gridfinity organization system by Zach Freedman
Hello, I've designed and made this bearing. It works i pretty good:) I've made various designs but this one works the best for me now. I use 4 of these on my spoolholder for a smoother feeding to my extruder. **Fixed the issue that the…
Heyho Here I have a simple and oldshool 608 bearing alternative 4 you :) 2 Design options: Smooth & Toothed. 2 Tolerance options: 0,2 mm and 0,15 mm. Printing “advice” Set Seam to “random”. If you can print multimaterial (Prusa XL, ..)…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
I remixed the model to accept larger 608 bearings, as they were easier for me to grind flat with their larger size.
Voron V2.4, Trident, V0.2 and Micron Spool holder Important note Be mindful of the type of bearings you use. You don't want too much free spinning. Try to find cheap bearing (it's not every day we can say that !) or use printed bearings.…
I couldn't find a yoyo model for a standard 608 ball bearing, that's why I created my own. I designed it with the specs of commercial unresponsive yoyos in mind: 55mm diameter 36-38mm width 54-60g weight Turned out that the yoyo can not…
Very strong pulley that uses a 608 bearing. I designed these to be easily mounted with wood screws and to withstand a lot of weight. They work great with paracord and can be used for a lot of different projects. Instructions : Use infill…
This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…
Work in progress So don't expect this to work as well as a steel bearing. It is a bit of a pain to get the bearing to work after your print is finished. but it will act as a bearing once you finish it. And spins really well. There are…
My original design has 12 individual spaces for bearings. This new version has three wide channels that can hold up to 5 bearings for a total of 15. Includes 1x2x3 version and a stackable 1x2x6 version.
This 3D-printed filament holder is designed for larger filament spools weighing up to 3 kg. It features a robust and stable design, using 608 bearings for smooth and efficient spool rotation during printing. Its simple construction makes…
Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…
This is a remix of KONEz*347 spool holder with 4x 608 bearings. I adjusted the rollers, no supports needed anymore and added a base to keep the feet together. This spool holder is 144mm wide, so it can handle almost every spool out there.…
Rodamiento 608 de 8x22x7 mm: Nombre del Archivo STL: "608_8x22x7.stl" Este rodamiento 608 ha sido diseñado meticulosamente para ofrecer una solución robusta y versátil en una variedad de aplicaciones industriales y mecánicas. Sus…
A 608 bearing using a print-in-place herringbone planetary gear, as someone requested. You might want to also check the customizable roller bearing . Print with random seams. I use 0.17mm layer height. Bed adhesion might be an issue.
Remixed from: https://www.thingiverse.com/thing:5498768 This remix has areas carved out on both sides of the roller that will accept a 608 bearing. The pins are also remixed so that one end will fit snugly into a 608 bearing, and the…
This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…
Toroidal Windmill - Self adjusting turbine The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. Insta Reel The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning. Beautiful Windmill with Toroidal…
The STL files were fixed again by @tbkMAKER and now everything works! Why is it better than the others? My spinning filament swatch box stands out due to its excellent storage design, which allows for smooth rotation. Additionally, the…
Kuličkové ložisko do Dryboxu Print instructions Pokusil jsem se vyrobit si vlastní kuličkové ložisko do Dryboxu. Původně jsem zkoušel tisk z PLA, ale zdá se mi, že lepší výsledek je pomocí ABS, výška vrstvy 0,10mm. Kuličky jsou dole…
A smaller version of the Snatchblock Plus . Try the Skeleton Zero Mini or the Pure Zero Mini if you don't have the M3 bolts. Light duty - 25lbs max Dimensions - 70mm x 33mm x 19mm Required hardware 1x - M3 16mm hex socket cap bolt 1x - M3…
A 608 sized gear bearing. 0.2 (_2), 0.175 (_175), 0.15 (_15) and 0.125 (_125) tolerance (in design). modified scad included. Print instructions Category: Parts Summary A 608 sized gear bearing. 0.2 (_2), 0.175 (_175), 0.15 (_15) and 0.125…
608 ballbearing (22mm external diameter and 8mm internal diameter) Print in place with supports for the balls. 2 versions : 608 Ballbearing with higher tolerances. A bit of play on the final result but usually turns more freely 608…
608 ball bearing using standard bb's for roller balls.
Print with 0.1mm layer height for the best snap fit. No supports needed.
Easy filament holder for your Ender 3 V3 SE. Also fits other ender 3 machines with this type of filament holder. Included sample hook lets you use it with filament samples that doesn't have own roll. Please dont forget about using spacers…
Simple V groove pulley with a press fit 608 bearing. Print in PLA or PETG, no supports needed. Doesn't really matter the layer height. Simple and quick.
Newer Version available This bearing works well but I revised the cap interfaces to get a tighter fit and better lateral fit, see: https://www.printables.com/model/1715172-a-better-608-bearing Description This 608 bearing is entirely…
I wanted to make my own print-in-place 608 ball bearing for my Ikea Samla Drybox so that all the necessary parts can be printed down to the IkeaBox. I modeled it in Fusion360 and so I can offer it to you as an .f3d file so you can easily…
Hexa-tube model added. September 20, 2023. Previously uploaded bearings did not work well under loaded conditions. By reviewing the construction and positioning the PTFE tube so that it intersected the shaft, a bearing with high…
I really enjoyed this spool holder is it prints very cleanly and does not require supports. I remixed this to use the mount from the "Voron v2.4 Sturdy Handles" as I like to mount my spool holder on the horizontal part of the frame and it…
This model is compatible with the lego system.
This is a bearing that does not use balls or rods. I discovered that balls or rods causes some unnecessary friction. It is a simple design but will spin better than any printed ball bearing. I recommend printing with slow speed and a…
Tri-spinner without the Knurl. The caps in the spinner work great for me, but other people have complained. So here is a link to another set of caps that work well too. http://www.thingiverse.com/thing:1848330 Print Settings Printer:…
Simple tires, printed in TPU, fitting to 608 ball bearings.
Re design to allow the use of the USB type C popular MT3608 that you can buy at Aliexpress or Amazon for less than 1 buck. You have 2 top cap versions, one with vents (if your project will need some power) or full covered to protect from…
Started to explore a roller bearing for integrating into a single-print-in-place fidget spinner (see https://www.thingiverse.com/thing:4876658 ). After looking at a few 608 bearings from Thingiverse (see below for references) decided to…
After creating the simple spool with sleeve for my Neptune 4 I always wanted to have one with bearings. I like HugoHuge's design , but it is too long and bulky, so not possible to use with 250g reels I have. Also, the design has to be…
Designed for my Prusa Mini to sit next to the printer on the desktop. It uses 16 x 608ZZ bearings, of course, you don't need to fill all the spots. The bearing slides from underneath and snap in place. Print Settings: Resolution: 0.2mm…
Filament guide, mounted to surface with screw Uses a 608 bearing Remixed from: https://www.thingiverse.com/thing:3148615
Edit 22/oct-2023: If you have trouble with the rollers “growing” into the inner and outer rings, you need to lower the gap closing radius in the slicer. In OrcaSlicer, this is found under Quality > Precision Print in place 608 Roller…
To assemble this 608 bearing, you need the following parts: 1x innerring 1x outerring 1x cage 1x assembly helper 6x steel balls diameter 4,5mm For the printing settings, I recommend setting the seam position to random. This will prevent a…
I wasn't happy with other bearing covers/flanges I was seeing, so I wrote this scad file to produce this v-roller. Defaults to a good size for a 608zz bearing, but can be customized to whatever dimensions you need. Provided .stl is…
I like my Prusa XL tool changer but don't care for the spool holders they included. This is a remix of @hugoG_253127's “Filler” filament holder to work with the hardware provided with the XL. By using 608 ball bearings, friction is…
Das klassische 608 Kugellager, aber aus dem Drucker! Ideal für Projekte, bei denen du kein echtes Lager brauchst, aber trotzdem auf das Format und Feeling nicht verzichten willst. Perfekt für DIY-Prototypen, Deko-Spinners oder einfach zum…
Hardware required: 4 bearings 608 (Dext = 22mm;Dint = 8mm; h = 7mm). Layer height 0.2mm. Printing speed 50 mm/s. The caps and the bearings fit perfectly in each hole. However, you may need to scale the models a bit under 100%, specially…
It is a very simple model. It has a lip on one side for the bearing to rest against. Maybe you have to very slightly shim around the bearing, as I designed it for a slightly loose fit (at least for my setup). The screws might be a little…
I tried printing the original bearings and couldn't get them to spin freely. So I found these bearings and adjusted them to the same size. I might try testing with the smaller bearings too, since these work so well and the design seems to…
Improved 608 bearing for super smooth rotation! the original model uses a spacer between the bbs, much like a real ball bearing. This type of design has the potential to run much more smoothly than the type where there's a cutout on the…
Spool roller for Neptune 4. Should also fit for Neptune 3 and maybe other printers.
I only had standard 608 (skateboard) bearings so this is an adapter to make them work with the original file. The smaller collar is to fit around the peg on the bottom section. Printed at 0.2mm layer height, 25% Grid infill, no support or…
In 1999, I had a BB rifle and bought a box of 6,000 BBs. I didn't use all of the BBs, but I'm glad I kept them around! I needed some 608 bearings to make some additional filament rollers, but all of the bearings I found online didn't work…
I have enlarged the painted turntable to 25cm as well as adjusted the foot. It is very fast and easy to print without support structure Thx @ https://www.printables.com/de/@Kahnindustries ich habe die lackier Drehscheibe auf 25cm…
Just a small upgrade to make the Z-Axis more stiff by adding some bearings on the top part. Before and after Version History V1.2TH Same as V1.2 but added through hole on top, so it will be easier to get the bearings out again. V1.2 Added…
Rodamiento 608 de 8x22x7 mm: Nombre del Archivo STL: "608_8x22x7 v2.stl" Este rodamiento 608 ha sido diseñado meticulosamente para ofrecer una solución robusta y versátil en una variedad de aplicaciones industriales y mecánicas. Sus…
I loved frez_knee's remix of mobious' original wankel fidget. I like the fact that it used a 608 bearing and had a way of captivating the mechanism so it all held in place. My first print of this is one of my favourite fidgets so far. On…
This is a spinning spray bed i knocked up to prime and lacquer some models. Its a little unstable, if anyone wants I can extend the legs or add an outer circle. Works fine as it is though There are 3 1.75mm indents in the top incase you…
A dispenser for twelve standard 608 bearings compatible with the IKEA Skadis perforated board system. When printing, it is recommended to use a gyroidal infill and lower print speeds to maintain maximum precision, so that the bearings do…
This is a fast printing 608 bearing which has less play than print-in-place options. For print settings, you can probably just use your slicer's default 0.20 mm layer height setting, with two wall loops and rectilinear bottom infill.…
Remix to make the bearing captive and improve tolerances - the original version did not account for 3D printing tolerances. Category: 3D Printer Parts
I liked the original model, but I wanted it to hold at least 20 bearings instead of 18. I managed to squeeze in 22.
Summary This remix fixes two things the original did not address: needed to allow cable to pass up/down through hole(s) in surface to which the pulley is mounted, and the wheel itself was too large. Details @hedberg : thanks for the…
Remix - This design allows you to convert an off-the-shelf cereal box into a dry box, equipped with a hygrometer
TUSH style spool roller for Eibos new filament dryer, by default it only has a center spool holder than was not allowing my spool to spin smoothly. Tested with SUNLU style spools only. WILL NOT WORK WORK WITH SPOOLS WITH A SMALL INNER…
I didn't like pausing the print to add the BBs. I added in two little cutouts to allow BB's to be put in after printing. They go in easily enough that it's not a pain, but tough enough that I'm not worried that the bearing might fall…
as i only had 608 ball bearings, i created my own peristaltic pump. It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas. - All the screws required are M3. - The silicone…
I had some tolerance issues with the original model, so I redrew all the components in Fusion 360, except for the center roller part. On my Bambu Lab X1 carbon, this printed well with just enough clearance to spin smoothly without…
I bought a 50 pack of bearings on Amazon, and needed a larger gridfinity bin to store them. 2x3x3u high. Obviously does not stack in this configuration, but I've included STEP & F3D files if you'd like to modify it. I used the Fusion 360…
I did an e-steps and flow calibration before this. The orientation of all the parts I printed is how it is shown in the STL when you load it. It doesn't matter how you print it but here's how I did mine: Barrel and roller with normal…
replacement lego axel with stopper
A 3D Printable compass inspired by the Rotio Compass ( https://rotio.co/ ) but fully redesigned by me. 😃 Utilize those spare and common 608 bearings you have lying around. Draw lots of circles? Don't want to fiddle with adjusting a…
608Zベアリングを使った回転する台です。 It is a rotating table using 608Z bearings.
A housing for a 608 standard bearing. Very small footprint. I printed it in 0.20 PLA but would recommend PETG or ABS. Use a clamp or wise to carefully force the bearing into the housing.
2x3x4 Gridfinity bin adapted with the mounting of the case by @whole_sense, model included as is with the caveat that it is sunk into the bin slightly to mitigate duplicative elevation/layers. Bin affords opportunity to store accessories…
A collection of functional print in place ball bearings of different sizes. Once you break them in properly, they can be used in light/medium load application = low grade robotics, filament holders, fidget spinners, RC vehicles, etc.…
A bigger version of the Snatchblock Mini . Same hardware, same strength, better looks. Light duty - 25lbs max Dimensions - 90mm x 43mm x 19mm Required hardware 1x - M3 16mm hex socket cap bolt 1x - M3 nut 1x - 608 bearing Printing…
