1512 modeli
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
I printed the original from @Robindk but it used a massive 15% support material. My improvements are: slightly wider male pegs for a snug fit (+0.2mm width total) 45° fillet on the male pegs to print w/o support no curved overhangs on…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
I needed some 21700 spaces for a DIY-Lipo battery I'm building. Couldn't find one on Printables, but found one on Thingyverse from user keepydroj: https://www.thingiverse.com/keepydroj/designs Link to the model:…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a way to convert a 18650 cell to fit in the BT-20 Wingman power bank which is sized for a 21700 cell. Requires two 10 x 2.5 mm magnets (commonly sold as 10 x 3 mm) press fit into the end. Suggest PETG for strength, no supports.
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
there is a bottom and a side spacer and there is one side spacer named temp in this you can mount a temperature sensor to monitor the batterie printed in PETG 3-4 Walls for strength you can import the step files direct in PrusaSlicer but…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hier habe ich eine neue Version für den Worx M700+ erstellt. UPDATE: V2 Slim zum Download bereit Er hat nun 7 Messer die mit einem zweigeteilten Messerteller verschraubt werden. Diese Teilung habe ich gemacht weil es damit einfacher zu…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
My Dyson V8 battery is running very short. I disassembled it and found 20700 cells inside. The limited availability encouraged me to design a cartridge for 21700 cells – they are widely available. Note: the conversion requires careful…
Wydruk około 2,90 €–3,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a guide bushing for the smaller holder for the makita router. One I intend to use to make finger joints. The annoying part is that the holes for the screws are not in a nice concentric circle around the axle of the router. So it…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
A grip for the Minolta x-700. The pictures show the grip with additional leather to increase grip.
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
mostly every owner of a makita pj7000 knows the problem with the vac hose connection - it doesn't fit to most european vac models. So i made this part here, just open the lid like for changing the sawblade and pull out the adapter. You…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Inspired by: https://inevitablecraftslab.wordpress.com/2020/06/06/veml7700-photographic-lightmeter/ Dis/Assembly Video Why would you make this? If you have old manual SLR or TLR cameras with no built-in light meter (or a non-functional…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Other versions of such battery-holders were wasting too much space between the batteries and thus too much filament in my opinion, so I created this version. Dimensions : 143mm × 45mm × 34mm fits 6 pieces of 21700 batteries of max…
Wydruk około 2,17 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stable stand for PocketBook 700 Era with cover (width 12,7 mm), holes on the bottom for self-adhesive 8mm non-slip pads. Optimal for charging and storing your PocketBook if you want to save space on your desk. Printed with 4 perimeters…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
nothing to say. just a black box, print it, fit it …
Wydruk około 3,81 €–4,66 € nettoWstępna wycena jednego wariantu
EN: To identify the control that activates the moderate intensity, forward illumination. To indicate the operational status of the low beam function. DE: Zur Identifizierung der Bedienstelle des Abblendlicht. Zur Anzeige des…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
EN: To identify the control that activates a special light (usually yellow in colour) located in the rear of the vehicle to aid with vehicle identification in foggy conditions. To indicate the operational status of the rear fog light. DE:…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is a handy little box to store spare collets in. 2 compartments, one for 1/4" collets, and one for 3/8" collets. I designed this as I recently lost 4 spare collets. Given how small they are, they're easily lost, but with this box I'm…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: To identify the control that activates a special light (usually yellow in colour) located in the front of the vehicle to aid forward illumination in foggy conditions. To indicate the operational status of the front fog light. DE: Zur…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
The Molle for all Yamaha Ténéré T700 Enduro and travel enthusiasts motorcycle rider. Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG / PLA Supporting Material none Comments printed on…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: To indicate any automatic closed loop function. DE: Zur Anzeige einer automatischen Funktion mit geschlossenem Kreislauf.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Replacement cover for GENIUS NX-7009 mouse. The pins on the original one broke of, so I created this. Fits nicely and holds in place. Printed in PLA without supports.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
EN: To indicate that the container is empty. To identify the empty reading or indicator position on the display or container. DE: Um anzuzeigen, dass der Behälter leer ist. Zur Identifizierung eines leeren Behälters auf einem Display oder…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
EN: To indicate limited rectilinear motion. DE: Zum anzeigen einer begrenzten geradlinigen Bewegung.
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
EN: To identify a manually operated control. To identify the switch position that places the equipment under manual (as opposed to automatic) control. To identify the control that activates manual control. To indicate that the equipment…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
EN: To indicate that the container is half-full. To identify the half-full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter halbvoll ist. Zur Identifizierung eines halbvollen Behälters auf…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the hose zipped in initially but it will soon conform to the curves…
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
I had long intended to print the Statue of Liberty in 1:1000. Since it is one of the strongest symbols, which was also very important in the time of the Ocean Liners. For many immigrants it was the symbol of freedom and the first desired…
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
Print without support. In Prusa slicer it is better to use Classic perimeter generator (instead of Arachne) and disable “Detect thin walls” setting. For fast printing increase number of perimeters to 4 (for 0.4 nozzle) and disable “fill…
This is a replacement part for the Turtle Beach Stealth 700 Gen 2 headset. My headset is for Playstation, but it should work for any 700 gen 2. This was modeled for the left side of the headset, but I would think mirroring the model…
You can buy these from me here! Consider supporting us on Patreon! These are battery holders that can hold (2) 18650/(4) 18350, (2) 21700, (2) 26650, and (2) 26800. I print these out of PETG for the toughness. My builds use a 0.6mm nozzle…
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
Model description The Bombardier CRJ700 is a regional jet airliner that was designed and manufactured by Canadian transportation conglomerate Bombardier (formerly Canadair) between 1999 and 2020. Their design was derived from the smaller…
This is a holder for a Philips Norelco shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all, so you have to dig through and find the one you need. The larger guards & blade are across the back, with the…
Created this cover to create a nice visual appearance on the back of the GameSir G8 Controller. Especially helpful if you cut the tabs to hyperextend the controller to fit a tablet (such as the Legion Y700 pictured). Recommend printing…
I can't find any high current 18650 holders on the market... So, this is it. Just need some M3x6+6(20A) or M4x6+6(30A) brass standoffs. ~~copper standoffs~~ Update: V2 Many small improvements. Print Settings Resolution: 0.2mm Infill: 20%…
This model is compatible with the lego system.
This time my daughter asked for a giant LEGO Batman...with pink cape :) so what could I do. I used LEGO model i found in Grabcad, and modified it for better 3D printing and easier assembly. It is 700% of the original LEGO minifigure size,…
Not much to it, I needed one quick, but could not find one that would fit my need so I made my own. I've printed it with 0.3 mm layer height and 0.45 mm extrusion width. Disclamer I have no idea how safe it is, don't trust it - it's…
Better to print from temperature resistant filament (ABS, PETg) and without supports
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
A box for Philips 7000 series 16 in 1 shaver (MG7736/15), that fits all pieces that come with the shaver. Features: Lid of the box stays upright when open - does not flop down to either side. This can be modified by removing the stops on…
Baskets for 1 to 10 batteries. I took the plates out of baskets 18650 from aliexpress as in the picture because I have a lot of them and I needed baskets for 21700 battery
Now comes in sizes up to 10! Took inspiration from the Battery Caddy, but in my opinion made it better. Here are my favorite features: Easy one handed battery removal Battery can be put in either way (positive side down or up) - use this…
It prints well without supports. If you need anything more customized than the models I uploaded, I included the f3d file. How to use: See picture 1 Measurements Tab height: 3mm Holder height: 10mm Cell spacing: 1.35mm (3 perimeters with…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
A nice little aircraft that took a relatively small amount of time to make, and is at the same scale as all my other aircraft. Scale 1:400.
This is a simple print-in-place protective case for Intel 12th-14th Gen CPUs (LGA 1700). Print instructions Rafts: No Supports: No Layer Height: 0.2mm or 0.3mm Infill: 15-20% 3 perimeters 3 tops 3 bottoms Filament: Anything should be fine!
A 21700 cell holder I came up with for make a 3p battery setup. They nest together in a nice, compact hexagonal/staggered shape for efficient use of space. There are two variants, and two setups. The first is a single piece, you can…
Smaller version of https://www.prusaprinters.org/de/prints/114024-traffic-cone Scaled to match Bruder vehicles. I used Das Filament PLA Neonorange colorprint_heights = 10.6, 19.6, 28.6, 37.6
Simple 21700 cell holder in the style of a beer crate. Holds up to 12 cells. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 Infill: 5% Notes: Can be printed without supports if your printer handles…
Dear Friends, If you like the Design leave a like and show some Love. I Bought an Anglegrinder from Makita and realised that the Battery got realy Warm and didnt last at long. So i needed more Power !! For what ever Reason Makita dont…
Since i like to keep everything in place, i made this box for Philips Multigroom 7000 version. It is for 13 peace guard and head version. Shaver itself fits in place perfectly!
These are caps designed to hold 21700-sized Li-Ion cells to create a 4S battery. It's made from TPU for tightness in fitting and for shock absorbing, leaving air gaps between each cell to facilitate airflow for cooling. Included files…
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 3rd iteration, you may know the previous versions https://www.thingiverse.com/thing:4743497 and https://www.thingiverse.com/thing:4818009 This time, the design aim was…
Stackable 18650/21700 Holder. Inspired by another stackable beer crate battery holders. 20x 18650 / 12x 21700 can be stored. To stack the crates, Print 'HOLDERBOTTOM' and glue it under the crate. *The model may not be oriented correctly,…
Die Vorrichtung zum Planfräsen wurde während einigen Twitch Streams entworfen, modelliert und zusammengebaut. Sie wird mit einer Kantenfräse Makita RT0700C oder Makita DRT50Z verwendet. Das Planfräsen von Weichen Werkstoffen wie Holz,…
Fit a screw in the end and snap it on the collet nut of your router. Give it a spin and see which way your router is leaning. Usually you would want to shim the router to get it pretty close, for most people 1mm or less off with this tool…
This model has been designed using pictures and videos found on the web. The dimensions are also inspired of the Big Bud 600/50 (scale 1/32) I have modeled in 2022. Weight : 2.3 kg Print time : about 100 hours with Ender-5 S1 at 120 mm/s…
Additional fence for the Makita PJ7000 biscuit joiner Parameter: Walls: 3 Infill: 15% Infill patttern: gyroid Support: yes Material: PETG or PLA , 112g (incl. support) Disclaimer The use of this attachment for the Makita PJ7000 is at your…
I modeled the original base plus two variation when extra surface area is needed when routing
Summary: The 21700 cell holder is a 3D-printable component designed for securely holding 21700 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
The Salica Frigo refrigerated cargo ship, modelled from scratch. Now I'm not entirely sure why this specific ship is listed as an example of a reefer ship everywhere, but there are abundant schematics for it which made modelling a whole…
This is a Li-ion charger compatible with 18650 and 21700 cells. Charges up to 10 cells. requires a 5v power supply at least 10A. I recommend 15A to avoid overheating. Each cell has its independent charging module TP4056 or TC4056. The…
This is my 1:32 (Gauge 1, 45 mm) interpretation of the DB Rlmmp700 flat wagon for heavy loads. The construction is similar to most of my other designs. (i.e. axles/wheels, bearings, mounting bogies, buffers, etc.) The top of the frame is…
I use a lot of Bosch Professional hand machines in my workshop and have a matching FSN 1100 guide rail. Unfortunately, my beloved Makita RT0700CX2J router does not fit this rail. Buying a Makita rail and a matching adapter is out of the…
I love repurposing Altoids tins. This is a collection of inserts for carrying various types of batteries. I've also included a blank insert you can use to create your own in Tinkercad or another design program. If you like this please…
This modification allows you to use the Gamesir G8 with a Lenovo Y700 tablet. If you are confident in your first layer adhesion and ability to print 45° overhangs, print with smallest section facting the bed as seen in the image. A brim…
My first design I've put together. I don't have any particular input on printing this, although I did print with supports. Had issues with zig zag supports, switched to lines (~1.5 - 2mm gaps), running horizontal to the front face of the…
A simple stand for your 18650 or 21700 Batteries. It can hold 24 of them. If you like check out my other designs too!
This 3D-printed battery holder is designed for 21700 cells and supports configurations of 6S2P or 12S1P, making it ideal for lightweight R/C air applications. The design ensures durability and stability while keeping weight to a minimum,…
Makita PJ7000 to Festool 27mm CLEANTEC hose connector. Replace existing hose connector.
Makita Oberfräse zu Führungsschiene von Makita / Makita Router to Makita guide rail Same like my version from Makita Oberfräse zu Führungsschiene Festool / Makita Router to Festool guide rail Category: Machine Tools
This 21700 battery holder is simple and mainly meant to fit some readily available metal contacts that are found in the common 18650 battery holders. There are 2 versions. If you have the space then go for the big one otherwise the…
1/11 scale of tractor Kirovec KT-700. It is possible to use only FDM printer but for some details is better use SLA. 8.6.2025 I added complete project from Designspark Mechanical for easter finishing.
Just a little case for two 21700 batteries. The cap is secure and snaps on satisfyingly. There are also grooves for air to escape/enter to avoid pressure/vacuum in case of a tight fit.
Model for 21700 battery with holes for nickel tape, hole size 8.88mmx0.165mm
Gwr 57xx 5700 class model rail model train british rail steam locomotive tank engine
print settings: 0,6 nozzle 0,25 layerheight formfutura rPETG with supports, orientation see photo
This is a strengthening mod based on an excellent battery holder by jkenny23. All credit goes to the original designer. If you like the model, please also click the original model link below and click like and probably post a make.…
This is a simple little cell spacer for a custom 3S battery for my Heewing Ranger T1. The most juice I can squeeze into it. I designed it to maximize the width and reduce the height of the pack.
easy for programming HMI panels without breaking cables
Scaled up nexty's 18650 battery spacer to accommodate 32650 battery size. I need just a few spacers for my LiFePo4 12v pack so it make more sense (and faster) to print it than buying on ebay. The dimension of this spacer is: 35.8mm x…
This update is a new design from my original glue nozzles and include the following improvements: Split design separating the nozzle from the cap and permitting replacement of just the nozzle (or cap) if necessary. Added nozzle sizes…
This is a quick hanger to hang the new Ryobi 18V Cordless Hand Vacuum with Powered Brush. It sits flush against the wall when mounted and I am happy with the fit. Printed in Inland Tough PLA at 220 degrees. 3 walls and 30% infill. It can…
If you like the Design leave a like and show some Love ;-) I remixed Thing 4581505 to fit for OSVAC and gave more volume to enable more Dust to pass through. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Filament:…
After remixing a Fleetmaster truck I wanted to create a flat-front truck and found the F700 as a suitable subject. It's designed with OpenSCAD and the parts are printed separately to allow for colour selection. I used super glue to put it…
13S4P 21700 - 48V 20ah Battery Tray - compatible with 2P Strips
I had 5 21700 Samsung 40T left from another project so I decided to build a powerbank. I used this circuit, which supports most charging protocols. In my configuration powerbank comes with 20.000 mAh and weighs 450 grams. A lot of…
A simple power bank with bought PCB and 2170 cells. I used the BAK N21700CG and LG M50 cells and a BMS/PCM PCB from Aliexpress (search term: QC4.0 QC3.0 LED Dual USB 5V 4.5A 22.5W Micro/Type-C USB Mobile Power Bank 18650). There were also…
Nouveau modèle amélioré et entièrement paramétrique: ZigZagStack Battery Dispenser Permet de stocker un grand nombre d'accus tout en étant bien stable. Imprimé en PLA (essayé en PETG mais moins bon qu'en PLA car trop souple, la tour se…
I have a Siemens EQ 700 coffee machine (TP705R01). The coffee bean container only allows for 350gr of coffee, which is inconvenient since the beans come in 500gr bags. So I made an adapter to enlarge the capacity. Unfortunately the size…
This is a set of dummy batteries, on each of: 18650 with button on top (yellow) 21700 flat top (green) 26650 flat top (white) 26700 flat top (blue) I use these to make battery enclosures etc. They are safer than using real batteries,…
