Wyniki wyszukiwania: 70mm

Sortowanie

614 modeli

P
PrintablesVeracon

Simucube 2 QR Adapter 50.8mm and 70mm

This is an adapter plate on the motor side of the Simucube 2 Wheelbase. With this you can mount 50.8mm or 70mm wheel extensions or QR's directly to the base. 100% Infill is recomended You will need M5 Brass inserts. If the wheel extension…

Wydruk około 4,21 €–5,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
160
Polubienia
16
Ocena
0
P
Printablesgskollnau

Bonsai pot 14 hexagonal curved inwards (mame) 120x120x70mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Wydruk około 5,08 €–6,21 € nettoWstępna wycena jednego wariantu

Pobrania
65
Polubienia
11
Ocena
5
P
PrintablesNeonDevil

Heavy Duty Strap Ring for Insulated Water Bottle with 70mm Lip

The ring ID is slightly undersized for a press fit and has a special profile to print accidental slipout. The slot is has ample height and with for complex paracord weaves or a heavy duty webbing strap.

Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
6
Ocena
5
P
Printablesgskollnau

Bonsai pot 29 round conical 150x150x70mm

Bonsai pot 29 round conical 150x150x70mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required…

Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu

Pobrania
42
Polubienia
9
Ocena
0
P
Printables3dNerdcave

Remix: Leichterer Gewürz-Organizer für Ankerkraut-Gläser 60/70mm / Lighter Spice spacer for Ankerkraut jars

Schneller, leichter und vielfältiger als das Original. Der Normale Halter für die kleinen Ankerkraut Gläser benötigt nur noch 19g Filament anstatt 27g. Der neue große Halter für die großen Ankerkraut Gläser benötigt sogar nur 15g Filament…

Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu

Pobrania
40
Polubienia
2
Ocena
0
P
PrintablesJacob

Wall-Mount Holder for Dispenser Bottles (Max Ø 70mm / 2.75")

A sturdy wall-mount holder for dispenser bottles with a maximum diameter of 70mm (2.75"). Designed for easy installation with screws, this holder provides secure and accessible storage for various bottles, including hand sanitizers.…

Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesFanda

Podtácek 70mm

Podtacek, také známý jako tácek pod sklenici, je malý plochý předmět umístěný pod sklenicemi, hrnky nebo lahvemi. Slouží k ochraně povrchů stolů před skvrnami, kruhy od nápojů nebo teplem. Podtacky mohou být vyrobeny z různých materiálů,…

Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesFanda

Podtácek 70mm Coaster Mom

Podtacek, také známý jako tácek pod sklenici, je malý plochý předmět umístěný pod sklenicemi, hrnky nebo lahvemi. Slouží k ochraně povrchů stolů před skvrnami, kruhy od nápojů nebo teplem. Podtacky mohou být vyrobeny z různých materiálů,…

Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu

Pobrania
8
Polubienia
2
Ocena
0
P
Printables3B

Tamping Stand (WEGA, 70mm)

Tamping stand, rubber pad

Wydruk około 6,35 €–7,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
5
Polubienia
3
Ocena
0
P
PrintablesRamjetX

RamjetX Thrustmaster T300 T500 TX TSPC 70mm Hub Adaptor Kit

Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…

Pobrania
1533
Polubienia
86
Ocena
5
P
PrintablesBolonder

Floating center cap 70mm

What you need: superglue bearings 22x8x7mm metal log or screw (weight) 7mm diameter Printer: RR400K Filament: ABS or PETG Settings: 100% infill, resolution 0.2 Tested in 180km/h You can remix for your own wheels :-)

Pobrania
1460
Polubienia
125
Ocena
5
P
PrintablesNerlin

70mm, 72mm, 75mm, 82mm, and Windex 23oz Bottle Holders for the Multiboard Storage System

For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…

Pobrania
1427
Polubienia
243
Ocena
5
P
PrintablesRetro Frog

Original Xbox 70mm Nexus Fan adapter and mount

The Nexus 70mm fan seems to be a pretty common cooling upgrade for the original Xbox. The stock fan is a proprietary 72-ish mm job that has a specific shape and these tabs that secure it into the back of the console. However there is no…

Pobrania
1307
Polubienia
78
Ocena
5
P
PrintablesMochPoch

Moss Pole Petit (70mm)

Stackable Moss Pole - Petit 70mm v1.1.0 Smaller version of the Moss Pole by MochPoch New Bamboo moss pole system has been released. Click here 🌱 Licensing If you'd like to support my projects or obtain a commercial license, consider…

Pobrania
1090
Polubienia
172
Ocena
5
P
PrintablesSpiky

70mm m5 bolt pattern drill guide

6x 70mm bolt pattern drill guide, the holes are all 5mm including the center. Update 1 - fixed files for the guide with bearing Update 2 - added a version without bearing that fits a 32mm sized hole (old version is 35mm). and relabeled…

Pobrania
981
Polubienia
78
Ocena
5
P
PrintablesMeca Dynamics

AAP-01 Suppressor 70mm

Do you like tiny suppressor like me? I present to you my little custom suppressor for the AAP-01! You can put this bad-boy on your airsoft replica with the 14mm CCW thread to have a really cool looking gun! !!!!!!! AIRSOFT ONLY !!!!!!!…

Pobrania
941
Polubienia
89
Ocena
4,88
P
Printableskenel

70mm EDF

I used a 2204 2300KV brushless motor, actually, it's not tested, i'm making tests to see if it works. 15 Blade propeller.

Pobrania
851
Polubienia
36
Ocena
0
P
PrintablesGekoPrime

Pastamatic - shim to allow the use of spools with 70mm ID

To do: Change spool_max_ID in the main project so this shim isn’t required

Pobrania
830
Polubienia
78
Ocena
5
P
Printablesphilventure

Mini Vice 0-70mm

My printer broke, so I couldn't test it :/ Give me some feedback, thanks! I recommend printing in 0.1mm layer height These models are for private use only! If you have some new ideas, features or wishes, write me a message. I will…

Pobrania
777
Polubienia
202
Ocena
4
P
PrintablesBrandon Raineri

EGO Leaf Blower Stubby Nozzle 70mm - Vase Mode - 0.8mm Nozzle

This a a stubby nozzle with a 70mm opening for EGO branded leaf blowers. This was specifically designed for the LB7650 blower but may fit other models as well (confirmed the fit works on a LB5300 as well). The design incorporates crush…

Pobrania
685
Polubienia
77
Ocena
4,67
P
PrintablesRamjetX

RamjetX Logitech G25/G27/G29 70mm Hub Adaptor Kit (Updated June 2019)

Hi Internet Sim Racers! I present the Logitech 70mm Hub Adaptor "kit" with 2 versions and a Quick Release Hub Adaptor. Whats in the Pack? 1) Standard 70mm adapter puck similar to that which is very popular. 2) Stubby 70mm adapter which…

Pobrania
643
Polubienia
37
Ocena
0
P
PrintablesHassan Saleh

70mm Wobbler Lure

As featured in: To assemble the lure you need: 5x 5mm stainless steel balls 3 twist wires using 0.8mm stainless steel wire 5mm eye If you have a different size wire or screw eyes and they do not fit, send me a message and I'll upload a…

Pobrania
639
Polubienia
73
Ocena
5
P
PrintablesTheFrog69

Small Modular Router Template Stencil Letters & Numbers 70mm Tall

Small (70mm tall) Modular letter and number system with spacers (20mm, 30mm and 40mm) and button connectors, for use with routers. 8mm thick, and use with a 12mm bush on your router. The letters and numbers clip together with the buttons…

Pobrania
629
Polubienia
137
Ocena
5
P
PrintablesWeshape

House Numbers Collection / 0-9 / ABCD / 170mm height / Serif

I needed a big number for our house, so I decided to make a whole collection of numbers, so everyone can use them. I wanted numbers with serifs, it is based on the beautiful Noto serif font. Numbers are 170mm high, and 10mm deep. If you…

Pobrania
619
Polubienia
30
Ocena
5
P
PrintablesFusedForms

Cable Labels / 20-170mm x 10mm writing space

A quick alteration of my popular cable tie remix model to feature solid sides, making it perfect to write on with a Sharpie or other permanent marker for organising cables and alike. It features 10mm x 20mm-170mm writing space. PETG is…

Pobrania
599
Polubienia
291
Ocena
4,88
P
PrintablesOliver Martens

Asetek Quick Release 70mm Wheel side

I STRONGLY RECOMMEND PRINTING IT LAYING ON ITS SIDE. There it is! For people who dont want to wait anymore. Here is a reverse engineered Version of Aseteks Quick Release for custom wheels. It has very little to no play and is rock solid.…

Pobrania
568
Polubienia
65
Ocena
4
P
PrintablesLAB3D

70mm spray can holder 4

A solid solution to mount four aerosol or manual spray cans to a wall or tool cart. It has a flat back surface and two M5 flat head screw clearance holes per compartment for various mounting needs. Perfect for organizing garage space or a…

Pobrania
540
Polubienia
50
Ocena
0
P
PrintablesJoeRixon

Ultralight glider V3 (170mm)

Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.

Pobrania
529
Polubienia
45
Ocena
4

120×570mm NATO Sabot Round (APFSDS)

Wiki Link: https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS) Add a filament change about there for the 2-color look.

Pobrania
512
Polubienia
176
Ocena
4,5
P
PrintablesHassan Saleh

Topwater Walker 70mm

Required for assembly: 5 mm steel balls, you can also use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 4 mm eyes Super…

Pobrania
476
Polubienia
47
Ocena
5
P
PrintablesIgaoFerreira

Bandeja 140x70mm

Bandeja utilitária 140x70mm

Pobrania
467
Polubienia
10
Ocena
0
P
Printableswehrenseb

Pen Cup / Drawer Organizer 70mm Grid

Pen Cup / Drawer Organizer I made those pen cups / drawer organizers to organize my pens and other stationery products. The smallest one is 70mm x 70mm in size and the others come in multiples of that: 2x1, 2x2 and 3x1. The wall thicknes…

Pobrania
460
Polubienia
67
Ocena
5
P
Printableszenon Zenon

ENTONNOIR BEER PONG (GOBELETS EN 50MM ET 70MM)

impression du modèle pour gobelet 50 mm sans support avec bordure intérieur et extérieur. 0.2 de hauteur de couche, buse en 0.4, PLA

Pobrania
445
Polubienia
40
Ocena
5
P
PrintablesPeteJ

70mm Desiccant Spool Holder

Fill the empty space in the middle of filament spools with desiccant to keep filament dry, These desiccant holders tuck inside the spools, locked in place with flanges and a friction-fit lid. Perfectly sized for 70-mm wide filament…

Pobrania
428
Polubienia
45
Ocena
4,25
P
PrintablesJoeRixon

mini glider v1.1 (170mm)

mini glider v1.1 by Alex scaled down to 170mm wingspan to fit on the Prusa Mini+ or printers with smaller beds.

Pobrania
414
Polubienia
36
Ocena
0
P
PrintablesMichal

Ozubené kolo 70mm / Gear 70mm for Activity child board

Použití např. na domácí activity board pro vaše dítě

Pobrania
379
Polubienia
26
Ocena
4,75
P
Printablesjuricabi

BBS Center cap 70mm

BBS 70mm center cap Category: Automotive

Pobrania
378
Polubienia
21
Ocena
5
P
PrintablesS.G.

Hex Marble Tile Organizer 170mm

Ein Organizer um Gravitrax und kompatibele Tiles zu Stapeln. Mit 170mm passt es in XXL Starterset Kartons.

Pobrania
377
Polubienia
58
Ocena
4,25
P
PrintablesRobbert Laugs

Kiteboard Handle 205mm 170mm

kiteboard handle 2 versions holes 205mm and 170 mm (depending of the brand you got) recommend atleast 1mm thick walls and infill atleast 40% 0.2 layer 0.4 nozzle Print on it its side for the best strength

Pobrania
372
Polubienia
16
Ocena
0
P
Printablesaussie-printing

4mm round hole (170mm diameter sieve)

A round sieve with 170mm. diameter and 4mm. holes.

Pobrania
372
Polubienia
20
Ocena
0
P
PrintablesCoolbruh

170mm by 75mm honeycomb storage wall shelf

Used a remixed insert tab by K2_kevin - https://www.printables.com/model/162845-insert-empty-remix-without-the-tabs/files Easy to move around yet fits snug.

Pobrania
368
Polubienia
54
Ocena
4
P
Printableskpb44cth

Perfboard 50x70mm 18 x 24 holes

A simple component you can use to represent a 50mm x70mm perf board, for use when designing cases etc. Not suitable for printing. The STEP file can be uploaded then imported into Fusion 360 for use in your projects.

Pobrania
351
Polubienia
9
Ocena
0

Larger Stronger Honeyshelf for HSW (270x70mm)

Larger. Stronger. Easier to get stuff out of

Pobrania
350
Polubienia
60
Ocena
5
P
PrintablesSkrattoune

Elegoo Centauri Carbon - Internal 70mm Spool Holder v3 - Quick Change remix

Modification of Synthetic Electron “internal spool holder v3” adapted for enabling spool quick change (similar to the “Quick change” remix performed by TB for Synthetic Electron “internal spool holder v2” ). Can handle spools up to…

Pobrania
339
Polubienia
55
Ocena
4,75
P
PrintablesR.deBrouwer

Golf Tee slim no supports 70mm 2.75 inch

Golf tee 70mm / 2.75", no support needed Based on the dimensions in the image, changed the hole for the ball in such a way you dont need support. If you like this model, please download and leave a like. i would really appreciate it. i…

Pobrania
337
Polubienia
7
Ocena
0
P
PrintablesThael

Chess Figure Set Dubrovnik [GIANT - Kingsize 4.96"] - mod easy-to-print [for a board with 70mmx70mm fieldsize]

Chess Dubrovnik Set - mod easy to print Kingsize 4.96" (for a board with 70mmx70mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…

Pobrania
311
Polubienia
25
Ocena
0
P
PrintablesDrJones

Minimalistic Elegoo Neptune 3 Pro spool holder, 70mm & 125mm (only 6g/12g)

I checked the other filament holders here, but all I checked have the wrong thread - at least for my 3 Neptune Pro (they have a thread pitch of 1.8mm – the correct pitch is 1.5mm), so I had to design my own model. Since I love vase mode,…

Pobrania
306
Polubienia
46
Ocena
5
P
PrintablesHorry3

Drill bit for EPS and XPS polystyrene 70mm

Material: PETG it's enough infill: 100% highly recommended Drill_EPS_XPS_1: print teeth up with supports under the cross If assembly is so tight just slightly grind edges on Drill_EPS_XPS_2

Pobrania
302
Polubienia
30
Ocena
4,6
P
PrintablesNigeke

GRAVITRAX height stone 70mm with pass through

GRAVITRAX ; always short of height stones? Not anymore, just print your own! GRAVITRAX height stone (column) H=70mm with pass through (v.20211110.r04) This one is 70 mm height is compatible with Gravitrax, Pro Vertical It has a slot…

Pobrania
298
Polubienia
16
Ocena
5
P
PrintablesPOLYCUTZ

Earring Holders / Earring Stands 30-70mm width

🌟 RECOMMENDED 3D PRINTING SETTINGS 🌟 To ensure the best results for your 3D printing experience, we recommend the following settings: 📏 Layer Height: 0.2mm 🚀 Print Speed: 40 - 50 mm/s Please note that the specific settings may vary…

Pobrania
297
Polubienia
90
Ocena
0
P
PrintablesStarNiell

Hand-rolled cigarettes box (drum 70mm)

Hand-rolled cigarettes box (drum 70mm): A tiny and funny box for hand-rolled cigarettes (drum 70mm) Post-Printing paint as you like use a glue for fix the rails use a <2mm iron wire inside the hinges

Pobrania
296
Polubienia
35
Ocena
0
P
PrintablesD3Xt3R

HSW Holder 40x40x70mm

This is a remix of LordDenos original HSW Holder but with 70mm height

Pobrania
295
Polubienia
46
Ocena
5
P
PrintablesMatzetas

70mm EDF thrust tube (fits Dr. Mad Thrust Alloy EDF)

This is a thrust tube for a Dr. Mad Thrust 70mm EDF and designed for high speedsot an aerospace engineer, but i tried to design it as good as possible, and after schübeler's description on their website:…

Pobrania
284
Polubienia
13
Ocena
0
P
Printablesblckbear

70mm to 80mm CPU fan adapter

Remixed fan adapter to reduce plastic usage and smooth out the circumferences. Category: Computer

Pobrania
283
Polubienia
20
Ocena
5
P
PrintablesHiRez99

RC Plane Wheel 2.75" / 70mm , Hub + TPU Wheel

I decided to design wheels for my RC Plane models. The printed wheels are 30 to 50 percent lighter than standard wheels. The base is printed from PLA. Printed wheel from TPU flexible material. The wheel hub fit to 4mm axle Print Settings…

Pobrania
280
Polubienia
43
Ocena
5
P
PrintablesOndřej Karas

Vykrajovátka: číslice 0-9 (Cookie Caster: numbers 0-9), 70mm

Výška číslic: 70mm Height of digits: 70mm

Pobrania
275
Polubienia
13
Ocena
5
P
PrintablesFilamenteater

Shower Drain Hair Catcher (⌀70mm) suitable for Viega Tempoplex

The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic. The part was created with FreeCAD.…

Pobrania
262
Polubienia
25
Ocena
5
P
PrintablesNigeke

GRAVITRAX 8 pieces! height stone 70mm with pass through (where prusa makers dare!)

GRAVITRAX ; always short of height stones? Not anymore, just print your own! GRAVITRAX height stone (column) H=70mm with pass through 8 pc. (v.20211110.r04); 8 pc. in one go of the 70 mm height column; compatible with Gravitrax, Pro…

Pobrania
249
Polubienia
27
Ocena
0
P

Hygrometer Holder for 70mm glas lids

No more shaking the jar to find the Hygrometer! This Hygrometer Holder is designed to fit standard 7cm glas jar lids from IKEA for example. Glas jar lid sizes are usually standardized, so it does fit other brand as well. Have fun and…

Pobrania
242
Polubienia
54
Ocena
5
P
PrintablesSenjiEQ

Gridfinity 70mm compressed air can holder

2x2 Gridfinity block designed to hold a 10oz compressed air can and straw in any of the four corners. This block should also work for other spray paints, wd40, etc. Interested in Gridfinity?

Pobrania
239
Polubienia
25
Ocena
4,67
P
PrintablesJon West

Simagic QR to 70mm Steering Wheel Adapter

I ordered a couple of these Simagic QR adapters for my OSW Simucube wheel from AliExpress because they were dirt cheap in comparison to similar offerings and had good reviews online. When they arrived, I realized that the Simagic/Moza…

Pobrania
235
Polubienia
14
Ocena
0
P
PrintablesMeganoodle

Ruler 170mm

A 170mm ruler , designed as it was the one thing I dont have in the house and I needed one. There is a series of holes in 10mm increments, can be used as a crude compass with the aid of a drawing pin. Measurement is fairly accurate , all…

Pobrania
235
Polubienia
14
Ocena
4,5
P
PrintablesBlackFury

Round 70mm clamp/ring

The original idea was to make a ring for my LTT water bottle, so that it does not clank when near other metal bottles in my backpack. However, for some reason I abandoned that idea. Now it serves as a round clamp. The inside diameter is…

Pobrania
234
Polubienia
11
Ocena
5
P
Printableslion7718

Silica Gel Container-70mm

The 60mm container works fine in most filament spools, but it falls into some plastic & cardboard spools. So I made a 70mm container to fix this.

Pobrania
232
Polubienia
25
Ocena
4,67
P
PrintablesNovel Tinker

Extra-wide lens hood for Canon RF 24-70mm f2.8L IS USM

Simple to print--a single piece, no supports required. Flexible tabs click this lens hood into place when you put it on the lens. Mine was printed in black matte PLA (for minimum reflectivity) on a Prusa Mini with a stock 0.4mm nozzle at…

Pobrania
228
Polubienia
19
Ocena
0
P
Printablesscooter_magavin

170mm x 75mm tray with front lip w/small hex attachment for the HSW

170mm x 75mm tray with front lip for the honeycomb storage wall.

Pobrania
225
Polubienia
46
Ocena
4
P
PrintablesRamjetX

Thrustmaster T300 T500 TX TSPC 70mm hub (30 Degree Rotated)

Hi Internet Sim Racing Fans, Another quick upload by request. This is a remix of my original 70mm PCD Thrustmaster hub adaptor. Except this one is rotated 30 degrees to fit this…

Pobrania
214
Polubienia
23
Ocena
5
P
Printablesrodsgear

Thrustmaster 70mm Steering Wheel Adapter

Remix from the nice design Slowly I've used the thread from the original and made some adjusts to the thickness and also added a cut for to fit those 70mm Aliexpress drift style wheels with horn. It should work with T500, T300, TX and…

Pobrania
214
Polubienia
24
Ocena
0
P
PrintablesUpDown

Longboard 70mm Wheel Wall Mount Storage

Wheel mount for 70mm wheeled longboards. 0.4mm nozzle 0.2mm layer height 2 walls (yes, I know it's hard to believe) tree supports 20% infill

Pobrania
213
Polubienia
138
Ocena
5

Adjustable GPU support, 45-70mm

This was my first print after assembling my Prusa (and obligatory beer opener), just to realize, its too high in lowest position. So ive remodelled it in fusion after got some basic skills. The silver one is original, black is my make.…

Pobrania
213
Polubienia
19
Ocena
0
P
PrintablesDennis M

Gravitrax compatible 70mm and 140mm towers

I liked the original design and made two more sizes to accommodate our needs. I also rotated them a bit so they fit properly together on the slicer layout.

Pobrania
207
Polubienia
19
Ocena
5
P
PrintablesREYKER

70mm Floating Center Cap

This download will have 4 files, a base, a cap, and two swingarms, I noticed variation in my test prints on my machines and differrent material, so one swingarm is .05mm smaller where it fits to the front cap, print them both just to be…

Pobrania
202
Polubienia
25
Ocena
0
P
Printablescamdotcam

Sharpening Guide - 70mm wide 20 degree angle

Fits 70mm wide stone Designed in Fusion360, Printed in PETG, 15% infill, 0.2mm layer height but any material and settings should work Fins on the bottom help to keep the guide from scooping up the wet slurry from the stone, the guide also…

Pobrania
193
Polubienia
26
Ocena
0
P
Printables3D Chihuahua

Pixar Luxo Jr. Ball - 70mm and 42.67mm

A Pixar Luxo Jr. themed ball that requires no AMS, AMS Lite, MMU, or any other automatic material changer. Parts are held together using miniature locking pins. No adhesive necessary. The 70mm sized ball is ideal for juggling and the golf…

Pobrania
191
Polubienia
18
Ocena
5
P
PrintablesMarioF

Filament Abroller bis 70mm

Filamentroller für Trockenboxen, kompakt und mit Schrauben montierbar.

Pobrania
188
Polubienia
20
Ocena
5
P
PrintablesAnthony

Center Ring from Ø70mm to 66.10mm

Zentrier Ring für Alu-Felgen mit innen Ø70mm auf Ø66.10mm z.Bsp. RIAL Alu-Felgen für Renault Grand Scenic III Print instructions Gedruckt mit ABS oder PETG

Pobrania
185
Polubienia
10
Ocena
0
P
PrintablesMoixo

Backpack Container 70mm

Circular container with 70mm in diameter. The model has 4 different lids to choose: with holes (to store stuff which needs ventilation as fishing bait, food, etc) and without them. Two with a carabiner hole, and the other twos without it…

Pobrania
181
Polubienia
57
Ocena
0
P
Printablescoolgrey5

70mm Skate Board Brackets

Skate Board mount for a 70mm Dia wheel. G-Code is for PET-G but could be re-sliced for PLA. I used 4 perimeters for a decent wall thickness, and 8 layers top and bottom, so it should be plenty strong enough. I hid the Z-seam in the radius…

Pobrania
180
Polubienia
36
Ocena
5
P
PrintablesOliver Martens

Thrustmaster QR 70mm Universal Hub with 6 Pin DIN Connector

I haven't found a standart 70mm hub adapter with a fitting DIN 6 Pin Connector Housing for the ones i bought on AliExpress, so i made my own. Hope this helps you if you had the same Problem. I used the threaded part from Slowly, the rest…

Pobrania
179
Polubienia
20
Ocena
0
P
PrintablesJavar
Pobrania
179
Polubienia
7
Ocena
5
P
PrintablesVoodoo

Skoda Fabia 2002 speaker ring 170mm (165mm)

A coluna de som do meu carro avariou tive de fazer um adaptador Espero que gostem Se imprimir este objeto, por favor partilhe a sua impressão 3D ----- English version ( translate google )--- The speaker of my car broke down I had to make…

Pobrania
179
Polubienia
18
Ocena
5
P
PrintablesLandon Campbell

Ender 3 Risers/Feet (20-70mm versions)

Uses the Vslot extrusions to attach to the bottom of the printer. It also utilizes the stock rubber feet for grip and vibration reduction. The version I have printed and tested is the 40mm version. I would recommend printing only one to…

Pobrania
170
Polubienia
19
Ocena
5
P
PrintablesAbratzo

70mm Gerätedose unterputz

70mm Gerätedose unterputz

Pobrania
170
Polubienia
21
Ocena
0
P
Printableslwr20

70mm Mecanum Wheel

We needed a 70mm mecanum wheel. This is a remix of a previous, larger mecanum wheel we used on Tigerbot in 2018 PiWars. https://www.thingiverse.com/thing:3127629 Original inspiration came from https://www.thingiverse.com/thing:1358552…

Pobrania
163
Polubienia
14
Ocena
0
P
Printables490 MFG

Sony FE 2.8 24-70mm GM II camera Lens Gridfinity Bin

Simple Gridfinity Bin to store a Sony FE 2.8 24-70mm GM II camera Lens. Has a generous amount of play front to back to allow whatever Lens cap, or dust cap you might have. Either aftermarket or stock. A second variation of the files have…

Pobrania
158
Polubienia
22
Ocena
0

Quick Release Mount for Hoverboard DD 70mm

Made a 70mm mount for the DD base from Hoverboard

Pobrania
158
Polubienia
32
Ocena
0
P
PrintablesJonny

70mm Hex - Tap or Screw bit box

I designed this box to keep my hex type tapping bits safe. Its designed for taps that are up to 70mm in length, and up to 10mm wide. It is knurled to assist in opening and has a print in place hinge. The gap tolerances are 0.1 mm so make…

Pobrania
157
Polubienia
33
Ocena
4,75
P
Printablesron

PTFE tube OD 4mm jig cut - all sizes from 20mm to 70mm

Maturity: Very Good 8 prototypes. In use since 2020/11. Pick the size that fits your needs. I takes too much time to reorder the 501 files properly. They will stay disordered. I let you make a text search on files page for the needed…

Pobrania
153
Polubienia
20
Ocena
5
P
PrintablesEduard Sukharev

Logitech G25 to 70mm adapter - with central horn button inset

Steering wheel adapter for Logitech G25 base mount. It's a remix of a model by @vasilp. What's changed Height is +4mm Added wide central recessed part to fit central horn-button from racing wheel This object was made in Tinkercad. Edit it…

Pobrania
152
Polubienia
10
Ocena
0
P
PrintablesMaki97

70mm pipe bend / elbow cutting jig

Here is a jig for a 70mm pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…

Pobrania
149
Polubienia
18
Ocena
5

Asetek Quick Release 70mm from base

I made myself a mount for the base. You can download the quick release mount for the steering wheel here: https://www.printables.com/model/425542

Pobrania
149
Polubienia
24
Ocena
0
P
PrintablesH3dSprint

Mixer ⌀70mm for rod with thread M8

Working direction of the mixer is clockwise. Before printing, decide if you want to mix the liquid up or down and select the related .stl file. Print instruction: material: PETG (recommended due to solvent resistance) layer height: 0,2mm…

Pobrania
148
Polubienia
49
Ocena
0
P
PrintablesZinc

Stackable square storage box 100x100x70mm (Vase mode)

Recommended to print in Vase mode with wall thickness of 0.8mm. Bottom layers more than 2. If you print it with vase mode, the box can withstand quite a beating, and also it makes it smoother and less break prone when separating boxes.…

Pobrania
148
Polubienia
45
Ocena
5
P
PrintablesJon West

Sim Racing - MOMO (70mm PCD) to Nardi (74mm PCD) Steering Wheel Adapter

Simple adapter to fit a Nardi wheel onto a Simucube/OSW/etc standard 70mm PCD base. Requires 6xM5 heated inserts to be fitted into the Nardi (non-recessed) holes. I used these heated inserts, M5x6x7OD size, but have also included the STEP…

Pobrania
141
Polubienia
16
Ocena
0
P
PrintablesAlpha_Salsa

Fractal Ridge | fan duct for 47mm cpu cooler (or any 70mm clearance)

It's for any 47mm height cooler with a 92mm fan, I use it specifically for the Fractal Ridge. It uses the existing fan clips, a little more force is needed to put it back in because of the 1mm extra height. Dimensions: 92x25x92mm I use it…

Pobrania
139
Polubienia
25
Ocena
0
P
PrintablesDelta_aviator

rugged box mm*220mm*130mm*70mm (low profile)

rugged box mm*220mm*130mm*70mm (low profile), better clamps at least for me, and lower profile

Pobrania
138
Polubienia
17
Ocena
0
P
PrintablesMadSciSlack

Turkish Drop Spindle - 70mm, 100mm, 125mm

The simplest tool for spinning fibers into yarns. Available in 3 sizes and designed to print well on any printer without supports. Fully tested and verified to work great by a legitimate fiber arts expert. Very popular items.

Pobrania
138
Polubienia
51
Ocena
5
P
PrintablesDmytro

70mm Base Jaws for Vise Miniature Holder

A set of jaws to hold miniatures with 70mm base diameter. There are two variants: one for the original chuck and the other, labeled removable, is to be used with Removable Jaws Mod . Each jaw has a 0.2mm sacrificial layer of material in…

Pobrania
138
Polubienia
15
Ocena
4,5
P
PrintablesHM

Spraycan holder quadro 70mm

Reworked the original tripple holder, and made it slightly bigger, to make better compatibility with wither range of cans 7 cans version will also be available Print time approx 8.25 hours, 0.25 layer height Esun ABS+

Pobrania
137
Polubienia
11
Ocena
0
P
Printableskrisztian96

Skoda 70mm Wheel Cap Center

I quickly made an emblem for my friends car. Utilized PrusaSlicer filament change and SVG import during the design phase, Outer Diameter is exactly 70mm. He was unable to find a Skoda for this exact wheel cap.

Pobrania
136
Polubienia
15
Ocena
0