1552 modeli
Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night?? The ⚡ EV Charger Holder J1772 ⚡ is designed to hold an at home Level 2 EV charging plugs and cables…
Wydruk około 5,37 €–6,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top. No supports needed as long as you print it on its side…
Wydruk około 7,87 €–9,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print a piece of Space History Size : 200mm (diameter) x 2.2mm (66% of the real size) The bottom is a reproduction of the Side 1 of the Voyager Golden Record . The top is a reproduction of the record cover diagram that contains the disc…
Wydruk około 3,85 €–4,71 € nettoWstępna wycena jednego wariantu
Similar to my other model, but the charger is inserted perpendicular to the wall. This provides easier access, but does make the charger stick out further from the wall. The whole reason I made the first one was to get something flat up…
Wydruk około 5,04 €–6,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a M-10AF Lexington from Cyberpunk 2077 with movable magazine and shutter Videos about this model: https://vm.tiktok.com/ZSJBu1mJ2/ https://vm.tiktok.com/ZSJBmwtf6/ https://vm.tiktok.com/ZSJBujJXk/ Print Settings Printer: Artillery…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This planetary gearbox is designed specifically for a 775 DC motor, offering a compact and efficient solution for high-torque applications. Add lubricant for better and quieter performance. ! Always put on cover ,pinch point hazard!…
Wydruk około 2,04 €–2,50 € nettoWstępna wycena jednego wariantu
Printed in generic PETG at 0.2mm layer height without any supports, 5 perimeters, and 20 bottom solid layers. Write in the comments and post a make. Thank you and enjoy!
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended)
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Do you have a dead SSD and an unshatterable ego? Then look no further, print this, superglue the two sides together, and attach it to your bag, purse, keys or anything you desire! Originally created cause I thought M.2 SSDs kinda looked…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena jednego wariantu
I was looking for a badge and I found this Cyberpunk badge . Added a hole and a clip in order to be easier to wear. An M3 screw can be used to put the parts together, M3x5.
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Oh f***, that’s Rogue — hey, don’t stare. You seen the huscle standin’ next to her? Yeah? Well, she could kick their asses. S***, choom, Rogue’s a living legend. Queen of the Afterlife, they call her. Used to be a Solo before upgradin’ to…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
I modified the this model to make it printable: https://3d.si.edu/object/3d/fossil-whale-excavation-site-mpc-677:a4068a00-9712-4c8e-8948-a9e2ea27fe0a From the Smithsonian 3D-Model archive. I find archaology really interesting and amazing…
Wydruk około 10,00 €–12,22 € nettoWstępna wycena jednego wariantu
Checklist Stencil Circle & Square
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not bad, monsieur. Not bad at all. Isn’t it silly when a netrunner struts about in rags when elegance is so easily achieved? The color — it brings out my eyes, non? I do adore it. And the jacket is functional? How charming. Spinal…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na holící strojek Philips MG7720 s možností připojení nabíječky. Vytištěno s tryskou 0.6,…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I took rodsmith's J1772 to Tesla Adapter Holder from Thingiverse and tweaked it. Updates include (see attached pic): Increase this face for a tighter fit and added radius for assembly. Add radius and thickened the overall width of the arm…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this logo to be as close as possible to the original Cyberpunk 2077 logo. Unlike many existing models, this version is not simplified and is based directly on the Cyberpunk 2077 svg available on Wikipedia, ensuring accurate…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Inspired by: https://inevitablecraftslab.wordpress.com/2020/06/06/veml7700-photographic-lightmeter/ Dis/Assembly Video Why would you make this? If you have old manual SLR or TLR cameras with no built-in light meter (or a non-functional…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D printed holders for Yaesu FT-70D, Radioddity GD-77, and Yaesu VX-5R HAM radios There are multiple versions of the Yaesu FT-70D holder, one with a larger base (feet). I first designed these using Moment of Inspiration, then I redesigned…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Needed a mounting bracket for a friends car mobile radio so made in onshape. M4 screws for everything I printed in PetG, Polymake PolyLite. Print it on its face.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A battery holder/storage for 10 CR2477 batteries.
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
T-slot turn screw/flange that allows you to use a cheaper (big box store) HEPA filter made for the other, louder brand of shop vacuums on a Fein 9.77.25 Dust Extractor. (Please comment if this works for more brands or models, and I will…
Wydruk około 1,44 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made to have a spot where to charge my phone without having to plug it in. I have a 2020 Mercedes-Benz A class (W177) but it should be compatible with same generation B class (W247), CLA (C118), GLA (H247) and GLB (X247). Please, still…
Wydruk około 3,24 €–3,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description Protective storage case for Intel LGA 775 CPUs. The case holds a single CPU and snaps closed without screws. The top has an opening that leaves the CPU visible, so the model name and other markings can be read without opening…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nilfisk Multi II 30 T INOX VSC tube holder for aluminium 35mm tube. Tried finding this is shops to purchase, but was not available in my country.
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Swinging J1772 bracket that allows you to lay the charger flat against the wall and swing it out as needed. Printed in PET 40 % but may go higher depending on longevity. Prints in place as one object. A little crunchy in the joint as the…
Wydruk około 10,42 €–12,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Box pro 3 HDD ORICO 2577U3-BK-BP Externí box pro 2,5" disky, max. kapacita 2 TB, USB 3.0, USB-B a Micro USB B 3.2 Gen 1
Wydruk około 6,60 €–8,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this because I was in search of a sleek solution for wiring up an oven with false plug protection within the Reflex SI series. Sadly, there are none (even without false plug protection or any plugs at all for that matter), so I had…
Wydruk około 4,19 €–5,12 € nettoWstępna wycena jednego wariantu
I wanted a battery holder that I could place in a storage box and not worry that the batteries would fall out if the storage box tipped. I designed this simple holder with spring loaded sides holding each battery.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
this model of storage is for this speed loader Fx Impact 34 shot .177 Speedloader by puna102 on Thingiverse: https://www.thingiverse.com/thing:6097819 This discussion centers on a custom-designed case that I created, which is compatible…
Wydruk około 11,97 €–14,63 € nettoWstępna wycena jednego wariantu
this speed loader model is for this one please see attachment the link for it created by Thingiverse user benny6 https://www.thingiverse.com/thing:5463950 This discussion centers on a custom-designed case that I created, which is…
Wydruk około 11,38 €–13,91 € nettoWstępna wycena jednego wariantu
Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…
This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…
Its an Turbine blower remix to fit an 775 motor. The original is from JolietDelta. I improved the design to fit an 775 motor. Also the turbine is a lot bigger than the original, the parts fit on an 200x200x100mm (LxBxH) bed. You can…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
1:200 Desk Model of the Boeing 777-9X.
⚫ Zetor 7745 ⚫ 👉INFORMATION👈 I would like to announce that the Zetor 6341 will be the last tractor I will make in foreseeable future. At least for a year, I want to take a break from the tractors. Right now I want to focus on sci-fi or…
This model is compatible with the lego system.
Stuff you'll need: 1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws) 2x M4x8 SHCS such as these - https://boltdepot.com/Product-Details?product=6392 Start by screwing the printed model onto the…
Braindance Wreath from Cyberpunk 2077. Full sized and wearable, this is the perfect finishing touch for Judy Alvarez and other cyberpunk cosplays. The model and documentation were made with maximum effort and intended to be a product, but…
A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…
PlayStation 2 Slim Replacement Shell – Designed for a 220x220 mm print bed. Fits original parts without modifications Disc drive-less Requires new screws (see image) A fully editable STEP file is included for your modding needs. (HDD or…
Cyberpunk 2077 logo. 150mm X 37mm X 10mm. You can change Z height if you want to make it thicker or thinner. Print instructions Rafts: Doesn't Matter Supports: No Resolution: 0.2
⚫ Zetor 7711 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. If you like my work, I will be very happy if you support me by giving me a follow and subscription on…
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
Model of the Boeing 777-9X. Contains files for creating a HO (1:87.1) model (can go bigger). Or a more reasonable 1:400 sized one with all the parts in one .3MF. Print instructions Make sure to mirror the parts for the large print Large…
A box for Philips 7000 series 16 in 1 shaver (MG7736/15), that fits all pieces that come with the shaver. Features: Lid of the box stays upright when open - does not flop down to either side. This can be modified by removing the stops on…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
Aliens APC, connecting pieces of filament, pins and gluing, m3x8 and m3x10 screws needed viz galeri fotos APC wheels rotate and turn in sync, rotating and sliding cannon, rotating front cannon, sliding side doors, interior from side door…
A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…
Simple and effective 3D printed duct fan that you can build with a 775 motor. I also tested it with BLDC motor from a drone and it works great. The only downside is that it's quite loud but that is the case for most of the ducted fans. It…
This is a remix from a model from BR562 on SKFB. I figured there weren't any really good models of the UNSC's primary tactical dropship so I updated this one and added many surface details the original lacked. Always drink from the skulls…
Ensure the safety and security of your Tesla electric vehicle with this Tesla J1772 Adapter Lock. Designed with Tesla owners in mind, this innovative accessory provides peace of mind and convenience when charging your Tesla Model S, Model…
This model is compatible with the lego system.
One of those things you do when you're bored. Just for fun :) Physically definitely not correct, but still makes a lot of air at the exit. Needed parts: - 4x M3 min. 20mm / max. 25mm long - Socket Head Screws - 2x M4 x 8mm - Countersunk…
Diabolo Box oder Schüttelbox für Diabolos 4,5mm im Kaliber .177. Druck ohne Support, Nozzle 0,4mm, Laye 0,2mm, Infill 30% PLA + von Sunlu. Nach dem Druck mehrmals rein und raus schieben, dann geht es leichter.
My interpretation of Skippy, the AI assistant of the Iconic variant of the Arasaka HJKE-11 Yukimura in Cyberpunk 2077
This is the Relic made for 3D-printing. The "The_Relic_2077" map contains several files. The uses of these files will be discussed here. For 3D Printing: The model is cut into 3 parts. The silver outline, the inner black part and the…
A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…
This is a simple model of gear for 775 motor that I designed to test how durable it is. It is a part of a bigger project that I am working on now. Maybe someone will find this project usefull. Easy to print and assemble and gives you a…
This model is compatible with the lego system.
I present a full size replica of the pistol from cyberpunk 2077 with a lots of details. It has a detchable magazine attached to magnets All parts should fit in a regular 220x220 mm 3d printer Print Settings Printer Brand: Creality…
VW Wheel Centre Cap 77mm Part number - 7L6 601 149 Replacement of the original part in case of loss, breakage or just like that :) Tested in heavy traffic :)) During printing, you can change the color layer by layer for a better effect ;)…
This model is compatible with the lego system.
Gandalf from the Rankin and Bass version of the Hobbit.
Okay, let’s see what we’ve got here. The Memo TTX HDR 250; not bad for Zetatech. Damn, I can do a lot with this thing. Ha ha! Gotta tell Ev. Hey girl, it’s me. So that MRAM you hooked me up with? Hella preem! Peeps’ll be lining up halfway…
I printed it with PLA at 15% infill and .2 layer height on my Ender 5S1. I found the other DeWalt drill holder and it just didnt properly fit my drill and my drill sometimes slid off the wall, this fortunately keeps it secure and even…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the M777 howitzer, in use by…
This is the Arasaka Shingen smart SMG from Cyberpunk 2077 There are a lot of parts for this, especially the scope. I may create detailed and simple versions so that people can choose which they prefer This model is still a work in…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
This model is compatible with the lego system.
ripped from the files, edited slightly to be printable best to be printed on its side, with supports
This is the second rendition of my first case ( here ). The case got an entire overhaul while mantaining the low profile gpu sandwich design. It consists of 10 pieces, it can be printed with a small printer and does not use threaded…
Kličenka ve stylu cyberpunk2077 - Arasaka Doporučují tisknout s tryskou 0.25 vzhledem k písmu. 0.25 nozzle recommendation
Spare part for beyerdynamic headphones dt 990 / 770 / 880 pro. This beyerdynamic headphones are my absolute favorites, but after some time the plastic parts one the site tent to break. I made some spare parts for that, it should be pretty…
This is my attempt at the Miltech Crusher from Cyberpunk 2077. I referenced screenshots from CDPR and drawings/pics from Volpin Props. Those guys are awesome, check them out. Modeled in Fusion 360 There is a text file with the bill of…
Someone at work asked me to make a replacement Safety 1st Everfit & Grow and Go car seat cup holder after his kid threw one of them out the window while they were driving. I used a caliper and copied the one he had left to the best of my…
This model is compatible with the lego system.
A redisign of the amazing Prusacaster model. While playing Cyberpunk 2077 I noticed the cool guitars scattered everywhere around Night City, and thought it would be awesome to have one in my collection. This project was awesome as it let…
Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2
The original broke so I printed a pair of those brackets. The cable (connecting left to right speaker) constantly moved between bracket and my head, resulting in uncomfortable pressure points above my ears. Therefore, I remodeled the…
This is not my design. It's a joystick remix of a gimbal designed by user Karavan on IL-2 Sturmovik forum: https://forum.il2sturmovik.ru/topic/13252-3d-печатная-механика-объект-77-б/ and shared on Thingiverse and v2 on Thangs. Images and…
I present full model of a Cyberpunk 2077 character - ADAM SMASHER. This model is ripped from the game by the program Ninjaripper. On the pictures it has ~28 cm (480% scale of the original files). Printed on anycubic photon mono 4k
First of all, this is limited right now to one size range, as it was requested and not too difficult to resolve. I’m including the STEP file, but for the threads you’ll want to refer to this config file . Pitch of .75, which is most common.
We created a differential swerve drive for our 2022-23 Power Play robot. This is the pod design we created for our robot. The differential swerve pod was designed to be mounted to a drivetrain using 40mm needle bearings and a 1/4" Hex Cap…
A quick and simple mounting bracket for 775 DC Motors. Two versions. One simple and one reinforced. My application did not require a lot of torque so this printed on PETG suffices for me. * UPDATE 2020-Oct-01 * Fixed dimensions I was not…
A police badge based on the CDPR teasers.
This silencer has been tested succesfully at 7.5 Joule of kinetic energy using 4.5 mm pellets. *please test with caution and always wear safety glasses when shooting *not suitable for pellets larger than 4.5 mm / 0.177 *test with caution…
Bilbo from the Rankin and Bass version of the Hobbit.
2d plate Samurai skull design from cyberpunk 2077
Silencer for the Crosman 1077. 105db without supressor, 80,1db with supressor. Neighbourfrindly ;-) I print it with 60% infill. I print it with ABS, but i think PLA is also working. Thx to Sidenius and BlixFox! Category: Sport & Outdoors
Cyberpunk 2077 keychain If you like this design, please consider buying me a coffee to support me in the creation of many other useful designs as a sign of gratitude for the huge amount of time and effort. Thank you very much and happy…
This little gizmo helps you load BBs into your Umarex USA Glock 19 .177 (4.5 mm) Air Gun magazine(s). Assemble the loader by attaching the threaded funnel to the guide (the walls of the guide should be facing away from the funnel piece).…
This EV Charger wall mount for J1772 plugs takes up a lot less space, protruding less than 3" (76 mm) from the wall! The 90° plug at a 45° downward angle is accessible and easy to plug in. Features: No holes in your wall! The wall mount…
