Liczymy pasujące modele…
Wanted to make some baseplates for my kids... used the scad model from https://www.thingiverse.com/thing:615256/files to get the size I wanted… Made the base a little thicker to stand up to the stresses of 2 toddlers(hopefully) Pieces fit…
Wydruk około 11,10 €–13,56 € nettoWstępna wycena jednego wariantu
The 3D model is used to divide the IKEA KUGGIS box into 3 compartments. This means that several items can be stored there without everything getting mixed up and/or you need several boxes for neat separation. Please leave a like if you…
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip…
Hace unos años un familiar me pidió una tuerca de Métrica 18 y paso de 2 mm, ya que se le había roto la bomba de achique del barco. Tras buscar tuercas en Solid Works y no encontrar la de Métrica 18 y paso 2 mm, decidí construirla desde…
M8 x 20 mm Bolt or screw with 1.25mm thread pitch follow or tip if u like <3 G-workz3D <3
The nut i used as a replacement for regular brass ones. Works great printed with PET-G, PLA or Resin (the one on photo).
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
This is a universal server rack ear fitting 20x20mm, 24x24mm, and 28x28mm bolt patterns. I based this off of the Linksys rack ear but made it a bit more universal since my Cisco Switch required a 28x28mm bolt pattern. I also made the 3…
This is the standard length version of my 5/8x24 muzzle thread protector. Depending on manufacturer, most 5/8x24 muzzle threads are 0.6" to 0.62" long, this protector is 0.62" long. Prints fine with either 0.2 mm or 0.15 mm layers,…
Simple remix with rounded magnets 8*2 (still compatible with original magnets)
A simple one-piece 608 bearing (8mm x 22mm x 7mm) without balls suitable for replacing a real bearing for testing or static modifications. Designed with tight tolerances, rounded corners, and printed in PLA in minutes. Edit: Added a new…
This is a rack ear meant for a Cisco SG300 series switch, specifically the SG350XG. The bolt pattern is 20-28mm squared (20,24,28 steps) so it's a bit more universal. I'll be posting a very similar one as a universal rack ear that's not…
This is our second take on the holder, it can be printed without supports. Have fun playing! Autodesk360 model is here: https://a360.co/3xyAb1v Racko Rack 10 https://a360.co/3vSRzLN Racko Rack 8x2
2025.06.10 Update: I re-modeled this as I've learned quite a bit since I first made this. There is now a version without cutouts, because some IKEA KUGGIS boxes don't have them for some reason. --- I needed a Gridfinity insert for the…
This remix is based on the original model of JoerT. The original design used magnets of 5x5 which I didn't have available. So I made a modified design that uses 4 magnets of 8x2mm (two in each part) I printed it for someone else (not…
10 inch Hotswap Drive Bay for Mounting up to 8 2.5" SSDs in 1U. SSDs can be up to 8mm thick (Some slim HDDs should also work). 8 SATA connectors with Cables oder 8 SATAto SATA Adapters (see last two Pictures) can be pushed in the back and…
To assembly it correctly, use some hammer, or just use hot air to get your bearing warmer.
Bottle Opener - Uses an 8x2 Magnet instead of 8x3
I wanted a maze that looked nice, and was easy for most people to work. The basic maze was created using Maze.scad. It can be downloaded at: ( https://www.thingiverse.com/thing:801913/files ) If you want to make a new maze, or adjust the…
I wanted a PET bottle cutter that fit the dimensions I needed for 22mm bearings with 8mm holes using M8 nuts and bolts that I already have on hand. Support is needed for printing. Proposed print setup:
🎈 Balloon Magnet Trio 🎈 | YOUTUBE VIDEO Add a pop of joy to your fridge, whiteboard, or any magnetic surface with this playful set of 3 balloon magnets! Each balloon is 3D printed with vibrant detail and fitted with a strong 8x2mm round…
This is a PaperSafe box for printing in darkroom. It is resistant to bright light and gives quick access to photo paper without having to constantly open and close the paper package. The size is adjusted for printing on a Bamboo Lab P1S…
I drew this up for a specific rifle of mine, hence the kind of odd length. I set number of perimeters when printing such that there is no infill to worry about. Obviously this thread protector isn't going to stand up the to heat from high…
Electric motor fan 58x220mm
Hey fellow makers! Please note: These are just the 608 bearings, the extra fidget spinner that I used to show the spinning potential will be available here >>> […
Just 8x2 nut for 3d printers. I don't like brass one so i printed my own out petg.
Gridfinity Vise-Grip 300mm-12in Adjustable Wrench Holder 8x2x4
Exactly the same, just modified to hold 2 more matrix screens for a total of 8x24 matrix grid. Use with iFlag as Simhub doesn't support multiple matrix's paired together. WLED also works really well with this.
This model is a remix of Xuis' coupler which allows you to join two PTFE tubes magnetically. This version is made for an M6 connector and 8x2 magnets. The design is also slightly different, as the model was made entirely from scratch.
A trimmed down version IKEA Kuggis Gridfinity 3x5.
I added holes for press fit 8x2mm magnets
This 3D-printed plant support system is inspired by the natural efficiency of honeycomb structures. Designed for versatility and ease of use, the modular hexagonal units allow you to build vertical supports of any height by simply…
A cleaning tool for Tr8x2, 8mm diameter 2mm pitch 1 start leadscrews. Note that these are not the same as the ones usually on 3D Printers, which are 2mm pitch 4 start. Printed mine out of PLA, 2walls, 15% gyroid infill, 0.2mm layer…
Repair Lock Pin for Honda Transalp 650 M8x20mm This 3D model is a direct replacement for the original fairing locking pins used on the Honda Transalp 650. It is specifically designed to repair or replace the side panel fasteners, which…
Inlays for the Kuggis 18x26x8 storage box from IKEA The inlay rests on the lower wings from the Kuggis, leaving a bottom pocket for storage as well. Different division versions are available to suit your needs.
You can print the large holders on a MK3S+ without skirt and brim.
Remix to use 8x2mm Harbor Freight Magnets https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html
Objective and eyepiece covers for the Zeiss Victory Pocket 8x25 binoculars. Print instructions Use PETG at the 0.10mm Detail setting, rotate 45º so the lines are parallel to the lens axis.
Remixed to hold 8x2 mm and shortened to 14 mm height
Simple modification of the original lead screw cleaner by @JalShah to be able to use 8x2mm magnets, as those were the ones I had laying around. Tolerance is pretty tight so the magnets can just be press fit without any glue
SparkFun Qwiic Single Relay DIN mount It was created for the Sparkfun singel relay module , which measures 58x27. Even with a layer height of 0.3 and PETG, it fits well. The board slips in and is designed with header pins soldered on. A…
The 8x2mm magnets needs to be glued in place. Only did the change for the side covers.
NO SUPPORT REQUIRED We’re thrilled to announce that our latest creation, the 3D printed cat skull magnet, is now available! This unique magnet can be enhanced with glow-in-the-dark filament for an even more striking appearance. For the…
8x2 magnets instead of the original.
I know 8x2.6mm magnet is a weird size. This was the smallest i had on hand at the moment. I will literally order all the magnet size in the world god damn it. Here is the Onshape file:…
A blank for design fitting. Original prop curvature was sourced from: https://grabcad.com/library/emax-avan-flow-props-1
No changes other than change the hole size for magnets 5x 8x2mm
A 1U bracket to mount a Sodola 8x2.5G + 1x10G SFP Switch in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…
A remix of rynn's humidity sensor mount adapted for 8x2mm magnets. Magnets are also not captive in this version.
4 mount holes for 8x2mm magnets. You need to glue the magnets into the holes. Category: 3D Printer Accessories
Display 8x24 dots case. Sourse: Бегущая строка своими руками | AlexGyver Rafts: No Supports: No Resolution: 0.2 Infill: 30% Parts: WS2812B 5050 RGB (60 leds\m) 22 x M3 bolt 18 x M3 nut Arduino Nano HC-06 Bluetooth Module USB-A Cable Tint…
Nahradní lahvička pro dřezový dávkovač saponátu. Závit 18x2 PLA 0,15 215/60°C Ender 3 Neo
Front and rear lens cap for monocular Vortex Solo 8x25.
Just changed the holes to support 8x2mm magnets instead. (Only the Front, Back and Side parts). Magnets are press fit into place. Also added the little washers I used for the bolts.
Modified the dimensions of the Flat Pocket Whistle by Jonas Daehnert to produce a different set of tones, and to allow printing on-edge.
lego technics brick 8x2
Remix of chiz design, just for 8x2mm magnets
Case für mittleres GoPro Case (Temu, Ali, ....) wenn es mal mehr sein soll, als in das Standard-GoPro-Hardcase reinpasst. Aufnahmen für: - 2x GoPro (8, 9, 10, 11, 12,…?) - Unterwassergehäuse - original GoPro Fernbedienung - GoPro…
Printed in PLA w 0.4mm nozzle. The version I uploaded is slightly larger than the one shown in the photo, and thus i did a slight angled trim at the corners to make it fit within a 220x220mm print bed. Orca removed the negative cylinders…
Itś a Remix of the "Prusa CORE One Magnetic Nozzle" by "CNC Kitchen", this Remix is for 4x 8x2mm round Magnets.
This is my take on replicating the IKEA RAMSHULT bracket. This model might be slightly different from actual IKEA bracket as I modeled it without having the actual bracket, I made it by looking on picture of it online. Should be the same…
Hey fellow makers! Please note: These are just the 608 bearings, the extra fidget spinner that I used to show the spinning potential will be available here >>> […
Bei unserer Bad-Dachluke war das Fliegengitter gerissen. Ich habe die Gitter-Reste entfernt und einen Spannrahmen gedruckt, der in den originalen Träger passt. Die Maße des Rahmens sind 248x248mm mit zwei abgeschrägten Ecken und einer…
This is not my original creation. Link to the original: https://www.thingiverse.com/thing:6323625 The original is great, but every time I lifted the lid, the risers fell into the printer, so I took some ND magnets and designed an insert.…
Coupling 5x8x26mm NEMA 17 Stepper Motor Coupling 5x12x26mm NEMA 17 Stepper Motor
Miniatur medicin box ready for each pocket. Double chamber one big for morning and one smaller for night.
Protection Caps for Zeiss West 8x20 Binocular Note: -print with TPU 100% infill -There are two versions (oval and round)
Printable bearing for the Hadley Telescope if you want to use 18x200mm boards for making the base. I printed it laying flat on its side, 30% infill and no supports. P.S: I used 2x “IKEA Snudda” for the circular bottom of the base, they…
Remixed Kettle bell keychain to make a fridge magnet. I mainly attach to my flash drive to hang on the side of my Centauri Carbon by adding an 8x2 magnet well on the bottom. The other file has the magnet well on the back. I recommend…
An index wheel for open-segment bowl making. Two rows of 18 holes allow for offsetting from the previous row. You will need three segments & three aligners to complete the wheel. Glue them to a ø200 circle cut from 7mm ply. Gorilla glue…
I have the nozzle size on the plate, so I can see from a distance which nozzle is currently mounted, without having to look directly at the nozzle. Very helpful if you have several printers with different nozzles.
🌟 Ensure perfect suppressor alignment and flawless barrel threading with this precision guide rod! When threading a barrel or mounting a suppressor (suppressor/silencer), perfect concentricity is absolutely critical. Even a fraction of a…
You need two nuts (M2.2) and two screws to attatch the mount propperly. The holes are for M2.2 screws. The height of the mount is 27.7mm. The diameter of the main hole is 22mm.
If you liked this model, go ahead and add a like on the original! This remix is just cosmetic :) I had a problem with the magnet holes being too deep, so I created a remix.
This is a simple shelving system that requires just 2-5 wooden boards 8x2. I used 5 boards I already had with about 50cm each. I think you could easily go longer. The top and bottom shelf sides lock together, but this is in no way…
This is a remix of https://www.thingiverse.com/thing:6835703 since the higher IKEA KUGGIS have bit smaller bottom area. Used in this video: https://www.youtube.com/watch?v=cxt6cw--9_4
Most Ikea furniture has standardised internal storage space to accommodate products like the sockerbit and kuggis. I ended up with a bunch of these in my workshop and wanted a divider to separate loose parts.
The gCompSW by superg is a 8 input 2 output automatic component video switch specifically designed for retro gaming sold by Castlemaina Games: https://castlemaniagames.com/products/gretrostuff-automatic-8-2-component-composite-switch…
2x deska z hornbachu 18x200 libovolná délka. 4x šroubek samořezný se zápustnou hlavou pro zajištění polohy (předvrtat)
I was unable to find a case for the Runcam PZ0420M with 28mm circuit board size. So here is one. The back lid is very thin and is just pressed in place. Printed this in red ABS and 2.5mm layer height. Category: R/C Vehicles
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
I printed the screw model with PETG material at a layer thickness of 0.2, with a nozzle 0.4.
Customized version of http://www.thingiverse.com/thing:51376 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=51376 Instructions I added a AAA and an 183XX to the AA to make a single complete plate. AA Base…
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
How a hollow bushing connects and the holder is produced can be seen below: https://nerd-corner.com/using-a-barrel-jack-as-a-switch/ or https://nerd-corner.com/de/hohlbuchse-als-schalter-verwenden/
This is an M28X2 nut for a Relaxdays bedside lamp.
8x2mm Magnet Tolerance Test, Test in sizes ranging from 8.1mm to 8.25mm to find out which one fits best.
Úhlová rohová výztuha ve tvaru L, 90°
I have a set of Ricoh/Pentax AD 8x25 binoculars, and I thought Fazal's model would fit. However, I wanted an eyelet so that I could attach the lenscap to the strap on my binocular to reduce the chance of losing it. I added the eyelet in…
Ive created holder for 18 2,5 HDD/SSD for Fractal Node 304 case.
Printed in PETG (no support was needed) 15% cubic infill 0.2mm height i used 8 8x2mm magnets (make sure the poles are facing the correct direction before you push them in) 4x 10mm M3 caps like the original creator suggested. I also bought…
diamond knife sharpener base to lift the stone to a more comfortable height. I would get some rubber to put on the bottom to keep it from moving while you are using it. you should be able to scale it to fit any stone you might have but I…
Remixed version to fit the magnets I had laying around. They are press fit and shouldn't need any glue.
Back side holder for the Fx20 Rocket booster.
Modif câblage mmu2s avec une prise molex et une attache imprimé pour y fixer sur l'imprimante pour sécuriser les prises et éviter tout soucis et qui passe a coté de la fixation du rmu Visserie: 1 vis M3x14 pour trou existant dans le cadre…
This is the spinner part of the Kamski 608 8x22x7mm bearing so you can test out the spin of your brand new bearing! For the bearing please visit here: https://www.printables.com/model/1281108-608-bearing-8x22x7mm-using-6mm-airsoft-bbs I…
I have made two types of rack for 5 ml eppendorff/cryovial - for 8x1 and 8x2 cells (13mm cell diameter and rack height is 25 mm). If printed on a side - could be made either without supports or with minimal supports along longest…
