Wyniki wyszukiwania: adventurer

Sortowanie

792 modeli

P
PrintablesAllar3D

FLASHFORGE ADVENTURER 5M ENCLOSURE

This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…

Pobrania
24 776
Polubienia
1448
Ocena
4,72
P
PrintablesXTRUD3D

Flashforge Adventurer 5M Drag Chain (AD5M)

I remixed the drag chain by INQUE and cut off the spool holder portion because I use a side mounted spool holder and don't have a use nor the space for the vertical spool holder. I also added in the drag chain termination part by Doug…

Pobrania
10 227
Polubienia
785
Ocena
5

Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…

Pobrania
8825
Polubienia
858
Ocena
4,82
P
PrintablesChall005

Flashforge Adventurer 5M Toolkit

23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…

Pobrania
8721
Polubienia
967
Ocena
4,84
P
Printablesdark256

FlashForge Adventurer 5M/5M PRO/5X Noise Reductor

Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.

Pobrania
8137
Polubienia
1042
Ocena
4,99

New v3.0 of top riser set for Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…

Pobrania
7567
Polubienia
796
Ocena
4,96

Flashforge Adventurer 5M (AD5M) IMPROVED Spool Holder, Inlet, Runout Sensor Mount + SIDE MOUNT Spool Holder! v1.1

This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…

Pobrania
6537
Polubienia
644
Ocena
4,6

Flashforge Adventurer 5M (AD5M) Filament Cutter - compatible with DIY enclosure when using my Design8Studio drag chain termination v1.1

CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…

Pobrania
5921
Polubienia
973
Ocena
4,74

Flashforge Adventurer AD5X Cover

This design can be printed using one of the AD5X feature - Multi-Color Printing.

Pobrania
5270
Polubienia
604
Ocena
4,96

Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v3.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
4939
Polubienia
451
Ocena
4,96

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.0)

NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…

Pobrania
4511
Polubienia
526
Ocena
4,88
P
Printablesmz333

flashforge adventurer 5m pro tools holder with glue slot

now you can print with support or just use the 2 parts with no support for the two part you need glue. printed in abs if you want the part to be stronger print the parts like in the picture.

Pobrania
4426
Polubienia
450
Ocena
4,88
P
PrintablesMedelis3D

Flashforge Adventurer 5M pro side spool holder + toolbox

I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…

Pobrania
3892
Polubienia
368
Ocena
4,68

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Pobrania
3715
Polubienia
520
Ocena
4,89
P
PrintablesMatthias E.

Flashforge Adventurer 5m Pro Extruder Pipe Guide

An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…

Pobrania
3555
Polubienia
437
Ocena
4,92

FlashForge Adventurer 5M Screen Bezel With Optional Stylus Holder

Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…

Pobrania
3317
Polubienia
399
Ocena
4,93

Flashforge Adventurer 5M (AD5M) Nozzles Box and Accessories Box - two styles to choose from, including sets that attach to back of printer v1.2

VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…

Pobrania
3128
Polubienia
387
Ocena
4,95
P
PrintablesMikhail Riabov

Flashforge Adventurer 5M FAN DUCT MOD I SNOT-MOD I СОПЛЯМОД I V2

Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…

Pobrania
2999
Polubienia
514
Ocena
4,94
P
PrintablesBen Engelen

Side Spoolholder Flashforge Adventurer 5M

You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.

Pobrania
2972
Polubienia
292
Ocena
4,67
P
Printablessliverbaer

FlashForge Adventurer 5M Build Plate Handle

I bought this HysiPrui PEI build plate from Amazon for my AD5M and wanted to print the handle part. I found that the build plate was added to OrcaSlicer by FlashForge. Source:…

Pobrania
2936
Polubienia
389
Ocena
4,5

FlashForge Adventurer 5M Side Mount Spool Holder

Overview A re-imagined side mounted spool holder for the Flashforge Adventurer 5M. This design fits over your existing enclosure piece “D1”. A 4mm x 10mm bolt might be needed to replace the existing bolt in the guard plate, although I was…

Pobrania
2917
Polubienia
374
Ocena
5
P
PrintablesHroft

Door hinge for adventurer 5m

Дверная петля меня не устроила, так как я сломал ее, пытаясь открыть. Я разделил его на три части, и оно прекрасно работает. Теперь, если вам нужно снять дверь, это сделает всего два движения, достаточно вынуть два штифта.

Pobrania
2875
Polubienia
219
Ocena
4,91
P
Printablesschreider

Filament Cutter 45° for Flashforge Adventurer 5M (AD5M) Printhead

The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…

Pobrania
2753
Polubienia
483
Ocena
5

Flashforge Adventurer 5M Enclosure "Slim Shady"

Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…

Pobrania
2735
Polubienia
402
Ocena
5
P
PrintablesCarlos Jaime

Spool holder for Flashforge Adventurer 5M

Recommend using PETG or better and at least 10% infill Hardware needed: 2 M3x16 for filament sensor 1 M4x8 2 M3x6 2 M3 brass inserts Working on some mods to the Adventurer 5M follow me for more updates :D

Pobrania
2694
Polubienia
244
Ocena
5

(1 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
2533
Polubienia
207
Ocena
5
P
PrintablesAndrey E

Part fan mod for Flashforge Adventurer 5m

Use tree supports only in green area (see photos). Print with something heat-resistant (abs, abs-gf, petg-cf, etc). Self-tapping screws for fan mount. Holes for 5x3 magnets.

Pobrania
2497
Polubienia
391
Ocena
5

Flashforge Adventurer 5M Enclosure

Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…

Pobrania
2423
Polubienia
352
Ocena
4,75

Flashforge Adventurer 5M (AD5M) Side Cutter Mount v1.0

This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…

Pobrania
2413
Polubienia
295
Ocena
5

Instruments organizer for Flashforge Adventurer 5M Pro with slots for 1/2/3 nozzles (Updated with more nozzles slots!)

I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…

Pobrania
2385
Polubienia
255
Ocena
5
P
PrintablesCHroniker1

Flashforge Adventurer 5M (AD5M) / Pro Cover

Printed with ASA and 0.4 nozzle with 0.2 Layer height.

Pobrania
2330
Polubienia
342
Ocena
4,89
P

Flashforge adventurer 5m (ad5m) enclosure upgrade HSW

I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…

Pobrania
2291
Polubienia
406
Ocena
5
P
Printablesmz333

flashforge adventurer 5m pro side spool holder

printed with abs with 30% infill work great with all spool type.

Pobrania
2241
Polubienia
221
Ocena
4,88
P
PrintablesMVerri31

Organizer tool kit Flashforge AD5X / Adventurer 5M

Italiano: Ho creato questo organizer perché non ho trovato altri progetti simili per le mie stampanti (AD5X e AD5M) senza enclosure. Com'è fatto: L'organizer è diviso in due pezzi: La Staffa di supporto: Si aggancia direttamente sul retro…

Pobrania
2157
Polubienia
450
Ocena
5
P
PrintablesRaym00n

FlashForge Adventurer 5m (AD5M) Hot end retainer with fan duct (silencer)

**UPDATED:: 07/11/25 Attempted to add FF logo =). Loaded it as a .3mf since I added it in slicer. 07/04/25 Adjusted the fan muffler angle and depth for better fit to hot end Cut lateral piece thickness down for better clearance and…

Pobrania
2154
Polubienia
258
Ocena
4,88
P
PrintablesGrey Sinclaire

FlashForge Adventurer 5M Drag Chain Kit (No Hardware Needed)

Hello, This is my first ever post and also creation I made for the FlashForge Adventurer 5M/Pro (AD5M) series printer. This kit allows the AD5M to have a drag chain that is not only minimal, but also keeps the new filament sensor in the…

Pobrania
2106
Polubienia
158
Ocena
4,33
P
PrintablesMak

Nozzle box for Flashforge Adventurer 5M

После покупки 4го сопла решил сделать для них единую коробку. В конструкции предусмотрен зазор под пальцы для легкого доставания отдельного сопла. В роли оси подходит кусочек прутка. Магнит 5х3 мм.

Pobrania
2054
Polubienia
283
Ocena
4,92

Drag chain kit for Flashforge Adventurer 5M

This model allows you to modify the coil support and better position the cables. I also left two holes to install a side support, in my case I made a support for the camera YES YOU CAN REUSE THE ORIGINAL SCREWS BUT LONG SCREWS ARE…

Pobrania
1996
Polubienia
261
Ocena
4,5

FlashForge Adventurer 5M Toolhead Covers

Overview Need a custom toolhead cover? Maybe your original was damaged? Take your pick of chamfer(sharp edge) or fillet(round edge) from the designs I have made or if you do not like them I have included the parametric source file for you…

Pobrania
1967
Polubienia
394
Ocena
5
P
Printablesdark256

Flashforge Adventurer 5M (AD5M) / Pro Cover

Printed with PLA and 0.4 nozzle with 0.19 Layer height. Nail polish was used for the coloring. Smear the surface with petroleum jelly, pour the nail polish, and wipe off with a cotton disk. Mr_medvedko dushniak & diatel

Pobrania
1965
Polubienia
259
Ocena
5
P
PrintablesBen Engelen

Side Spoolholder Flashforge Adventurer 5M (Fully 3D printable)

First mount the base on the printer, after that you can slide the holder to the base. WORK IN PROGRESS, still need to make the testprint but should fit according to the drawings.

Pobrania
1902
Polubienia
125
Ocena
4,44
P
Printablesschreider

Quietmode! Flashforge Adventurer 5M (AD5M) Back Panel w/ 120mm & 4010 fan

Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…

Pobrania
1900
Polubienia
575
Ocena
5
P
Printablesffontana

Flashforge Adventurer 5M enclosure

Complete enclosure as tiny as possible and with multiple opening options. I didn't like the official enclosure as I think makes the printer very big and has some kind of a toy appearance. Original metal frame at sight (not bigger than de…

Pobrania
1858
Polubienia
288
Ocena
4
P
Printableskbnb

FlashForge Adventurer 5M AD5M Hinged print-in-place lid stand

Hinged lid stand for Flashforge Adventurer 5M (AD5M) 3d printer. Works with manufacturers' DIY enclosure - just unscrew screws and screw them back with this stand. When stand is not needed, it just laying flat on the back side of a lid.…

Pobrania
1839
Polubienia
249
Ocena
4,96
P
PrintablesAlex Nize

Tool Holder // Flashforge Adventurer 5M

Use M4x10 self-tapping screws to mount the holder. Tear a hole for the screwdriver on the back side after printing. Print settings: Auto-orient the model in the slicer (lay the model on its top surface). No supports needed. 15-30% infill.…

Pobrania
1787
Polubienia
200
Ocena
4,9
P
PrintablesBen Engelen

Gridfinity Flashforge Adventurer 5M and 5M Pro Nozzle Box

Holder for spare nozzles of the Adventurer 5M & 5M Pro Nozzles. Gridfinity size 1x2 units and 4 units high. Fits the Flashforge box : https://www.printables.com/model/725161-flashforge-gridfinity-box

Pobrania
1780
Polubienia
258
Ocena
4,68
P
PrintablesMine Greg

Flashforge Adventurer 5X (AD5X) Cover

Printed with PETG and 0.4 nozzle with 0.2 Layer height.

Pobrania
1726
Polubienia
222
Ocena
4,89

Flashforge Adventurer 5M (AD5M) Printed Camera Mounts (two to choose from) v1.0

Both of these two models can serve as a drop-in replacement for the Flashforge injection molded camera mount, which is stock on the AD5M Pro, and can be ordered from Flashforge's website for use on the AD5M (non pro version). One of the…

Pobrania
1706
Polubienia
254
Ocena
5
P
PrintablesChongfun

Flashforge Adventurer 5M Build Plate/Sheet Holder

A holder for three Flashforge Adventurer 5M build plates.

Pobrania
1677
Polubienia
272
Ocena
5
P
PrintablesSoraseishin

Flashforge Adventurer 5M Drag Chain

Drag chain piece for enclosure upgrade. I printed 29 total. (Revised to 27 once I attached a drag chain clip). Recommended to print with the flat end down and the open end up. Does not include a drag chain clip.

Pobrania
1673
Polubienia
157
Ocena
4,8
P
PrintablesSergey Sergeev

FlashForge Adventurer 5M/5M PRO Lightweight Cooling Fan Duct

Remixed it to save 10 gramms and maybe better airflow. Test it yourself too!

Pobrania
1663
Polubienia
351
Ocena
4,92
P
PrintablesOllieMakes

Flashforge Adventurer 5M Drag Chain Clip and Adapter

I modeled the the drag chain clip as seen in the instruction manual for the Flashforge Adventurer 5M DIY enclosure . Drag chain clip This was designed to fit with Lauren Mills' drag chain model . I used a 16mm M3 screw for the drag chain…

Pobrania
1640
Polubienia
174
Ocena
4,67
P
Printablesmyxxx323

Вентиляционный канал для Adventurer 5M/5M pro

Посадочное место для вентилятора 5015 24В Для сборки и крепления понадобятся шурупы диаметром 2.5-3мм и длиной 10мм - 11шт. Для подключения сервы и 1 вентилятора написал небольшую инструкцию, работает на плате от Adventurer 5M. Инструкция…

Pobrania
1621
Polubienia
344
Ocena
4,91
P
PrintablesOllieMakes

Flashforge Adventurer 5M LED bar with Magnets

I added holes for 5x2mm magnets to mount these LED bars in the AD5M and be able to easily reposition or remove them as needed. Also added a hole in the end that was filled so multiple bars could be wired together. Model has holes for 8…

Pobrania
1551
Polubienia
259
Ocena
5
P
PrintablesViking3DK

Flashforge Adventurer 5M PRO Orca profile (New 0.4mm update 24.02.26)

HOW TO INSTALL PROFILES Pla profiles for the Flashforge Adventurer 5M pro. Already working on petg, asa and tpu aswell. (Coming soon) More filament profiles will be added aswell. 26.07.25 New profile update for 0.4mm nozzle and new…

Pobrania
1526
Polubienia
84
Ocena
5
P
PrintablesGDY

FLASHFORGE Adventurer 5M tool holder/organizer

I made this organizer for my convenience and as I see it for myself. Write constructive suggestions, if they are significant, I will make adjustments to the model. 2 bolts and M3 nuts with a length of 6 mm were used for fastening.

Pobrania
1520
Polubienia
160
Ocena
4,83
P
PrintablesDavid McIntosh

FLASHFORGE ADVENTURER 5M ENCLOSURE - Mini Top

Smaller top for the FlashForge 5M Adventure 3D Printer. I always thought the “stock” top on the printed enclosure to be a bit too big… I made mine ½ the size… and still fit everything. I also made a smaller Drag Chain extruder end… to sit…

Pobrania
1505
Polubienia
214
Ocena
5
P
PrintablesTeeJ

Side Spoolholder Flashforge Adventurer 5M - one piece

A remix of @BenEngelen_1385989's mount that doesn't need screws or inserts. I wanted to minimize the footprint of the printer as much as possible so I also shortened it so it just holds an average 1K spool. Will print without support if…

Pobrania
1500
Polubienia
107
Ocena
4,86
P
PrintablesMr F

Flash forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification

Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…

Pobrania
1458
Polubienia
160
Ocena
5

Flashforge Adventurer 5M Z-Axis Bearing Dust Cover

This dust cover is designed for the Z-axis bearing on the Flashforge AD5M (Adventurer 5M). It may also be compatible with the AD5M Pro, but I don’t have that printer to verify - your feedback is welcome. Based on feedback from other…

Pobrania
1458
Polubienia
189
Ocena
4,85

Flashforge Adventurer 5M (AD5M) LED Light Bars mod accessories - mounts for 5050 LED (2 strips per mount bar) v1.0

These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…

Pobrania
1456
Polubienia
242
Ocena
5

Flashforge Adventurer 5M (AD5M) - Retrofit Minimal Enclosure onto OG DIY Enclosure - get your touch screen back on metal frame v1.0

Heads-up News Note: I have included my OrcaSlicer project files for illustration of where support blockers were used. If you wish to use them to print from instead of just for seeing what I did, then, if you don't have the Klipper Mod…

Pobrania
1440
Polubienia
161
Ocena
4,89
P

Flashforge Adventurer 5M LED mount

LED from Juupine store. Wedge locked in place. No magnets or screws needed LED https://sl.aliexpress.ru/p?key=lvaxGEh

Pobrania
1426
Polubienia
182
Ocena
4,88

FlashForge Adventurer 5M Shielding Plate

Overview The original shielding plate for the original Adventurer 5m enclosure files had an error that caused many frustration. Worry no more, here is a shielding plate that will fit, a step file is also included for any modifications…

Pobrania
1390
Polubienia
188
Ocena
5

Flashforge Adventurer 5M Anti-Vibration feet

anti-vibration feet for Flashforge adventurer 5M used default standard setting + auto tree support

Pobrania
1375
Polubienia
165
Ocena
4,67
P
PrintablesOssie P.

Version 2.1 With Full PTFE Guide - Drag Chain Kit - Flashforge Adventurer 5M - AD5M

Version 2.1 - added “V2.1Guide.STL” Added "Adapter" Model with M3 Thread - Brass insert not needed. Original “Adapter” Model was renamed with “AdapterM3BrassInserts” as it uses M3 Brass Insert.

Pobrania
1338
Polubienia
205
Ocena
4,8
P
PrintablesChongfun

Flashforge Adventurer 5M Fan Stabilizer Mount

Lets you fully secure the motherboard fan in the Flashforge Adventurer 5M so it won't make unnecessary noise.

Pobrania
1330
Polubienia
241
Ocena
4,91
P
Printablesmyxxx323

Flashforge Adventurer 5M переделка печатной головки под hotend от Bambu Lab

Данная модификация позволит установить hotend от Bambu Lab на Flashforge Adventurer 5M / 5M pro. Печатал на Adventurer 5M из ABS GF-4 , слой 0.2мм, сопло 0.4мм, модель имеет мембраны в 1 слой под отверстиями, поддержки ставил только под…

Pobrania
1322
Polubienia
280
Ocena
0
P
PrintablesMinamir

Flashforge Adventurer 5M (AD5M) Lid Stand

Stand for FF AD5M acrylic top enclosure lid. Two versions included, Front , and Back or Side . Little over 30mm opening at lid edge. Print orientation as in stl files (horizontal), might be useful to increase number of walls/perimeter…

Pobrania
1279
Polubienia
205
Ocena
5
P
PrintablesZdendys

Flashforge Adventurer 5M filament cutter

Remix of the original model, the cutter is rotated by 90° to avoid hitting the enclosure. Slightly modified to print without supports, see picture. Assembly instructions and necessary parts are with the original model.

Pobrania
1276
Polubienia
199
Ocena
5
P
PrintablesTMM69

Flashforge Adventurer 5M Touch LCD screen cable socket FIX

This is a fix for broken for the Flashforge 5M that are notorious to be fragile and break. This can be printed out. It fits under the back cover to hold it into place and is just a bigger version of the original design. You will have to…

Pobrania
1271
Polubienia
97
Ocena
4,91

(3 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
1261
Polubienia
85
Ocena
5

FlashForge Adventurer 5M HSW Risers

Overview Honeycomb Storage Wall has been added to the side of my existing Adventurer 5M Clean Riser Set . Mix and match them for a truly unique look. The adjustable angle on the screen has been removed to attach the screen much more…

Pobrania
1227
Polubienia
403
Ocena
5
P
Printablesmz333

flashforge adventurer 5m pro tools holder

adv 5m pro tool holder base. i printed in abs the only part that need support is the hook

Pobrania
1216
Polubienia
164
Ocena
5
P
PrintablesZdendys

FLASHFORGE ADVENTURER 5M ENCLOSURE

Remix of the model from the manufacturer. It uses parts from the original kit supplied by the manufacturer. Differences from original for full functionality: M3x6 mm bolt 3 pieces and M3 nut 5 pieces are needed. M3x30 mm bolt 2 pieces for…

Pobrania
1210
Polubienia
150
Ocena
4
P
Printablescpayne3d

Flashforge Adventurer 5M Pro Quad Bearing Spool Holder

About the design My Flashforge 5M Pro needed a better spool holder, so I designed this one specifically to handle the various filament spool widths, and spool types. The cardboard spools were dragging on the original spool holder and some…

Pobrania
1208
Polubienia
154
Ocena
4,83
P
PrintablesPJB DESIGN

Flashforge Adventurer 5M Pro Spool Holder

I printed a shorter spool holder for the Flashforge Finder 3 a while ago as accessing the back spool holder like many others is not convenient and its not going to change with the AD5MP, the amount of spool holders for print and comments…

Pobrania
1195
Polubienia
128
Ocena
5
P
PrintablesCRracer712

Flashforge Adventurer 5M Pro Lid Riser

I've remixed this from the original one-piece model I found and sectioned into 4 pieces, 2 pieces per plate, this lid riser for the Flashforge Adventurer 5M Pro. Without the riser, the filament tube rubs on the clear plastic lid. I had…

Pobrania
1185
Polubienia
146
Ocena
4,63
P
PrintablesDavid McIntosh

Flashforge Adventurer 5M (AD5M) - drag chain termination at hotend - Smaller Profile Remix

Printed with tree supports in PETG.. prints clean. Thanks again to Doug for his work. Made this remix a breeze.

Pobrania
1138
Polubienia
114
Ocena
5
P
Printablessuper_liminal

Superliminal Enclosure for Flashforge Adventurer 5M

Designed a new enclosure. Main goals were: minimal as possible use the FlashForge kit as much as possible leave the screen mounted where it is all panels and door easily removable without tools design files are available for easy remixes…

Pobrania
1098
Polubienia
202
Ocena
0
P
PrintablesAndrew
Pobrania
1088
Polubienia
144
Ocena
4,89
P
PrintablesAdoo Dee doo
Pobrania
1052
Polubienia
36
Ocena
5
P
PrintablesSniffynose

Flashforge Adventurer 5M (AD5M) LED Mod.

After going over my enclosure build, I noticed in the original Flash Forge Step files, that there was 2 screw mounts sticking out from the front upper assembly, then I noticed when you buy the enclosure kit, it actually has some extra…

Pobrania
1041
Polubienia
192
Ocena
5
P
PrintablesCKAT

Flashforge Adventurer 5M Drag Chain Holder (AD5M)

Remix of drag chain by INQUE. For those who don't want to use spool holder.

Pobrania
1037
Polubienia
102
Ocena
5

Toadstool Adventurer - Shooms Collection!

He's 3 inches tall but he ain't small! Watch your ankles around this fierce fighter. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…

Pobrania
1029
Polubienia
367
Ocena
5
P
PrintablesJohn Robinson

Flashforge Adventurer 5M Series Fan Cover Retainer

Don't print this in PLA to use on the enclosed (5M Pro) - mine got soft and came off when I was printing some ASA. So I'm going to print one in ASA and see how it goes. Update 04/05/2025 - it went well. I'm so tired of running all my…

Pobrania
1014
Polubienia
94
Ocena
4,6
P
Printablespackley

Flashforge Adventurer 5m Enclosure Panels (Step Files for Laser Cutting)

I used these files to have 3mm plexi cut for the enclosure on my Flashforge Adventurer 5m using the specs provided on the Flashforge DIY Enclosure Wiki page. These are not intended to be printable, but should be used for cutting your own…

Pobrania
1009
Polubienia
100
Ocena
0
P
PrintablesSnakeFist

Flashforge Adventurer 5M (AD5M) Enclosure Mod - No Logo

Just removed the logo from the enclosure part, so you can easily add your own!

Pobrania
952
Polubienia
161
Ocena
5
P
Printableskeybl

Spool Holder FlashForge Adventurer 5m

V2 - https://www.printables.com/model/1313001-spool-holder-flashforge-adventurer-5m A simple, sturdy solution for placement Spool holder on the right side. The tube model was taken from:…

Pobrania
944
Polubienia
81
Ocena
5
P
PrintablesJwidess

Flashforge Adventurer 5M Recirculating Air Duct - 5015 Fan Mount

AD5M Recirculating Air Duct - 5015 Fan This model is for adding a Recirculating Air Duct to the Flashforge Adventurer 5M (non-pro) to pull air through the HEPA filter and vent it back into the print chamber to maintain chamber…

Pobrania
920
Polubienia
191
Ocena
5

Flashforge Adventurer 5M Tool trays

Trays for the most necessary tools (and small plastic waste). The base is installed to the left (and right) of the printing table on a thin double-sided adhesive tape, close to the back and side walls (glass). The tray itself is embedded…

Pobrania
916
Polubienia
168
Ocena
4,67
P
PrintablesMuad' Dib

Flashforge Adventurer 5M and 5M Pro Nozzle Box

5M and 5M Pro nozzles slide down into this storage so they have a snug but not too tight fight. Be sure to align the guides on the side with the slots in the nozzle for this. I printed the lids with supports due to the cutout on the…

Pobrania
915
Polubienia
151
Ocena
5
P
PrintablesJeff K

Modified hinge for Flashforge Adventurer 5M Enclosure

Hinges for a Flashforge Adventure5M. These have had the hole placement moved for better door swing. Door will not hit the frame now.

Pobrania
912
Polubienia
98
Ocena
5
P
PrintablesMuad' Dib

Frictionless Side Spool Holder for Adventurer 5M Pro

Allows you to side mount your spool on the 5M Pro. I have also included STLs for 3 different brackets as options. This can allow you to mount it higher or lower depending on the spool size. Remember this design is made to utilize 608…

Pobrania
912
Polubienia
136
Ocena
4,89
P
PrintablesCMP27240

Flashforge Adventurer 5M Pro Top Spool Holder for TPU

I didn' see one of these for my printer, so i used stonegas's file and remade the lower brackets to fit the A5M Pro. This model fits inside the frame where the top cover goes and uses 608 bearings just like the original. Included the STEP…

Pobrania
899
Polubienia
172
Ocena
5
P

Adventurer 5M - LED Light Mounts

LED Strip Light Mounts for left, right, and front of the printer. This is designed to fit the Adventurer 5M. The side mounts will work on 5Ms with or without the enclosure upgrade and are designed to Mount with 5: 5x3 magnets each. The…

Pobrania
897
Polubienia
87
Ocena
5
P
PrintablesSimon

Removable Exhaust Duct for Flashforge Adventurer 5m Pro

An exhaust duct for your Flashforge Adventurer 5m Pro to fit a 100mm / 4" hose. Three parts: Internal duct to prevent the printer from venting into the motherboard cavity. This has holes for 4 off 6mm diameter, 3 thick magnets, but really…

Pobrania
875
Polubienia
167
Ocena
4,5
P
PrintablesSnakeFist

Flashforge Adventurer 5M (AD5M) Cable Channel Covers

As I'm rethinking my printer setup, I wanted to cover up the ugly wires leading to the LCD and switches that I retrofitted to the case. Hides them pretty nicely. Fits on both sides of the case! For printing, just lay it on the bed…

Pobrania
869
Polubienia
178
Ocena
4,86
P
PrintablesPrint-a-holic

Flash-forge Adventurer 5M Anti-vibration Feet

Being that I am using Flash-forge brand filament I used their default Orca settings. Nozzle Temp: 220 Degrees C. Bed Temp: 55 Degrees C on the first layer for adhesion. 50 degrees for the rest of the layers. Fan Spd: 80: Supports: Auto…

Pobrania
852
Polubienia
177
Ocena
5