148 modeli
you will need two classic pins to assemble. put them into the holes and glue them with superglue on the side without the cap. than glue the whole thing on the pedestal. .I printed it without any rafts or supports with 15% infill and with…
Wydruk około 6,16 €–7,52 € nettoWstępna wycena jednego wariantu
Voroni Chaotic Penholder Hey maker! 👋 I started with a chaotic vase and modified it to apply a Voronoi pattern – the result looks pretty awesome! 😄 Features: Unique chaotic Voronoi design for your desk or workspace. Perfect for holding…
Wydruk około 5,50 €–6,72 € nettoWstępna wycena jednego wariantu
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
Printed with standard Voron settings: Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill percentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic Wall count: 4 Solid top/bottom layers: 5 Supports: NONE
Voron CHAOTICLAB CNC TAP endstop X EXTENDER Arm for PCB Endstop Additional material: Threaded Insert M2 dia 3,6mm, height 4mm M2x6 SHCS screw Insert the screw from the front into the lower oval hole in the cnc tap, mount the extension…
There was nothing included with Chaoticlab's CNC Voron Tap V2 to trigger the X-endstop PCB included with the LDO build, so i made one. It can be mounted with the same screws to mount a endstop switch on the included bracket. I printed…
Adapter to securely mount the v8 Dragon Burner to the Chaoticlab CNC Tap for Voron 2.4/Trident. The CNC tap is fairly tall compared to the Dragon Burner. You may need a taller extruder to clear it. I'm using a modified Wristwatch G2…
This is a paddle designed for the Choatic Labz V2 CNC TAP when being used on an LDO based kit or similar Voron V2.4 etc… Print face down, no supports, 4 perimeter walls, 5 top and bottom layers with 40% infill (Voron PIF perameters).
The basement key is probably one of the most important and significant objects in the series, since, as its name indicates, it is the key that opens the basement of the Jaeger house, where the secret is possibly hidden after the titans.
I was having issues with QGL failing sometimes with the original BTT mount that attached the Eddy Duo to the Voron Tap. This change fixed it for me and may help someone else. It prints quickly so is easy to try out. I moved the eddy…
I got myself a Voron CNC TAP from Chaoticlab and i saw that you need to put the X endstop on the TAP itself, but i have PCB for my X/Y endstops so i modeld something up quick and tought to share it here as someone may have the same…
Update 05.06.2025 I changed my hotend to a Rapido Ace, which is the shorter HF Version. So I had to modifiy the mount for it. I designed shorter version which has to be used with my modified BTT Slim Case…
Nau mai, haere mai ki Aotearoa New Zealand! Welcome to Aotearoa New Zealand! This is a rather simple model, based on an existing one with a few additions. The source is on Thingiverse by Suptommy9011, the resolution is not mind-blowing…
The STL file only contains one piece, which you need to print twice. The octahedral chamber inside has 6 vertices, and so causes the ball only to land on one of 6 “sides” when a weight/ball bearing is added inside! If you want, you can…
I used it to slide the carriage block of the MGN7 linear rail for cleaning and lubrication without losing any beads. In my particular case, I used it on the Chaoticlabs Voron Tab V2, but it should work on any MGN7 rail. There is a stop at…
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
I really wanted to the use the extra Chaotic Lab CNC Tap V2 I had kicking around, but couldn't find a good way to adapt the AntHead to this carriage. I found the original model which somewhat worked, but there were areas that clashed with…
I made this because my cat grew bored of predictable balls and needed something more stimulating. This ball rolls in unpredicatble ways and rattles. My cat really liked it! You need to pause the print to place the bearing inside. This…
modified for 3mm of extra clearence and mantaining same printing orentation
just added a extra cutout for revo voron. the metal bracket that guide the cables was getting in the way and to just make it easier I made a extra cutout for it.
Assembly: Be sure to fully insert the 2 heat set inserts from the back. They should be recessed into the part a few mm before bottoming out. Place 2 M3 FHCS in the lower mounting holes of adapter (leave hanging in place) Attach to CL Tap…
A mounting plate to allow the chaotic lab cnc tap to bolt to the dragonburner v8 tool head
Cartographer/Beacon Probe Mount for Rapido UHF for Voron CNC/CL Tap, XOL2 Toolhead
Based on someone's idea, I created my own version of a bolt cover for scooters from China like Laotie, Boyueda and others. No text or logos. You can finish it yourself in slicer. Install First put the version on the nuts (hex). Lightly…
Portachiavi a simbolo del corpo di ricerca Dell'anime Attack On Titan
This wapon is from Tangsan in Douluo cartoon.
I redesigned the tool to use the stock Hiwin linear rail and secure it with 2x M2 screws when replacing with new setup to eliminate the play from initial Hiwin design. I went with the HoneyBadger MGN7H setup from Fabreeko.
Hola a todos! Cansado de ver que todo el mundo sube sus impresiones a varios colores con sus impresoras multicolor, decidí hacer un diseño de una lámpara disponible para toda esa gente que seguimos teniendo impresoras de un solo filamento…
Work in progress - I haven't tried printing this just yet and it is missing some parts! Also, this is my first large model so I'm not sure if the cuts for will work. This is meant as a proxy for a Battlefleet Gothic ship. It's a part…
A mount for the Fly SB2040 v3 Pro LDC1612 sensor for the Chaotic CNC Tap As Klipper currently doesn't support endstops via Eddy.
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
EN: This is a Creality Sermoon S1 scan of a Laotian Buddha souvenir. The scan was created with 0.1 mm resolution and blue cross, parallel and single lasers. Unfortunately, the quality of the original is quite rough. — I would be very…
Part designed to fix problem with hinges ears being to short. You will need typical voron sized heat inserts
From the Smithsonian 3D digitization. Chinese art piece. See link: https://3d.si.edu/object/3d/ritual-wine-ewer-gong-masks-taotie-dragons-and-real-animals:d8c646aa-4ebc-11ea-b77f-2e728ce88125 At the page you can download .obj files with…
This is for everyone who uses the Chaoticlabs CNC Tap v2 in combination with the CNC XY Joints from them.
This mod enables a double shear, top bearing motor support for the AB motors specifically for the Chaotic labs CNC kit. It is a remix of the excellent work done by Vitali and adapted for precise fitment on the CL CNC kit. Print settings:…
Includes 4 AOT regiment emblems, 3 wall emblems, and the basement key.
https://youtube.com/shorts/il82DxLyXd0?feature=share It is intended for ferrite magnets with a diameter of 20 mm. The tolerances are quite large so that the magnets can be easily removed.
UPDATE 11.05.2025 - Added support for Rapido UHF hotend. Minor fixes for part-cooling. I wanted a toolhead for CNC TAPv2 that also supports big hotend, has CPAP cooling and has clear access and visibility to the nozzle and hotend for…
These counters are for keeping track of how many Mugic spells your creature has left in a game of Chaotic. I printed these out of Translucent filament so that they look like they do in the TV show when a spell is cast. If you don't have…
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
This is a pair of EGR Blockoff Plates that I made for the 50CC engine in my 2018 TaoTao Pony Moped. These reuse the stock hardware. Mine were printed in ABS with 40% infill and five walls, top layers, and bottom layers. STEP files…
Battery Cover for the 2018 TaoTao Pony Scooter with the GY6 engine. Pretty sure this will fit most of the generic chinese scooters of similar years/makes. I included the STEP file so that you can modify it for your application if you want…
I modified the BTT Eddy slim Shell, to better fit it on a Chaoticlab Tap V2. It replaces the original case. shortened the case made it slimmer added supports for the bottom board of the eddy removed the pocket for the screw heads You can…
Modified Dragon Burner & Sherpa Mini for Chaotic Lab Voron 2.4 CNC Tap. Changed bolt spacing and mounting methods to fit the Tap, take up as little space as possible and be as light as possible. Hotend used in the project:…
I have a TaoTao Pony with the GY6 engine. I'm doing a knock-off Aprilia theme, so there is an option here for that. I have included STEP files, so you can customize to your application. Mine was a press-fit into the container, but you can…
Style One is the most accurate, but not all the small details can be seen on print. Style 2 is a mixed style, but the details show up better.
V1.0 1.5 mm safety clearance from the XY idlers during tool change. 3.5 mm if the toolholder protrudes beyond the frame. (Fridge Door or DoorBuffer) Hardware List: 1x 1515 Extrusion 375mm (350 Voron) / 325mm (300 Voron) 8x Heat Inserts M3…
using these filters: https://www.amazon.de/Cherry-Tea-Taotronics-Luftreiniger-Schlafzimmer/dp/B08Z2KWJF9/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1YUL5CBA5RM51 and an 80mm fan. 10mm M3 screws for mounting the fan. Feel…
This is an Aizawa chaotic attractor, estimated to 0.01 step resolution and plotted as 25,000 coordinate points in three-dimensional space. These coordinate points were then converted into a 3d model in OpenSCAD using overlapping cubes,…
its 5 five part fully printable fidget toy. I printed the top of the inner part with 100% infill. This can be done in Cura by: creating a support blocker on the front 2. making it larger to increase the volume 3. in "per model settings" →…
With the latest version of Age of the Primes Slingshot released, it felt like time to update this old project to fit him! Spotting the very convenient quartet of tab holes on his chest, we've modified this chestplate to attach on via a…
Why I wanted to get better at using topographic data sources and incorporating them into models. Model Details Data Source The Whanganui topological data was sourced from https://www.opentopography.org/ using the Shuttle Radar Topography…
Air Duct for the TaoTronics 5L Humdifiert (see Picture) I could not let me run on high or moisture would build up on surfaces below it. The Air Duct lets the fog travel i longer distance an mixes it with air - now it work even on high.…
A drop in replacement for the included cable gland mount supplied with this kit . Same print settings as PUG apply. Requires 2 (or 4) self tapping M2 screws of at least 5mm.
The X endstop mounted on the CNC Tap v1 from ChaoticLab partially misses the right X/Y joint and makes unreliable contact. This extends the block downwards and can be installed with the belts already on. Afaik this works with the v1 of…
I bought the "high quality" ChaoticLab CNC Door Mounting Kit for Voron 2.4 for a lot of money, but it did not fit into the recommended standard original Misumi 2020 Profiles for Voron printers. The profile is 1mm deeper than what the…
Wikipedia Article: https://en.wikipedia.org/wiki/Malkus_waterwheel Youtube : https://youtube.com/shorts/1jZm7up250I?feature=share Bill of Materials: M5 x 16 x 1 ( Works as a pivot between axle and base) M2 x 16 x 1 ( Used to set angle…
Designed for Taotronics Soundliberty 92 earbuds. Figured I need a stand to place the charging case, so why not make a charging dock thing for it (charging capability not included). Print Settings Printer Brand: Creality Printer: Ender 3…
This clip is for the TaoTronics Bluetooth Transmitter/Receiver
Crest of the Scout Regiment/Survey Corps from Attack on Titan modelled in Solidworks for printing as a dual extrusion/multi material print. I have uploaded the Solidworks files should anyone wish to tweak the model and make changes to…
Dragon Burner V8 – Raised Orbiter V2.0 Mount This is a modified upper mount for the Dragon Burner V8 toolhead, designed for use with the LDO Orbiter V2.0 extruder and Chaoticlab CNC TAP V2. With the standard Dragon Burner V8 mount, the…
Replacement Voron z_joint_upper_x4.stl part I DIDN'T MAKE THIS – This site won't let me post this as a remix of: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Gantry/Z_Joints/z_joint_upper_x4.stl…
Replacement filter for the TaoTronics / Paris Rhône Cool Mist humidifier . It's not perfectly watertight, but it works fine with careful tank placement and removal. The largest part (the container) can be printed with PLA, 0.15mm, with…
Unleash chaos on your desk with this incredibly detailed 3D printable statue that captures pure rebellious energy in stunning detail! This dynamic figurine showcases flowing hair, intricate clothing details, and a powerful stance that…
This is my take on fixing loose light and blinkers on my Laotie ES19. This bracket fix the light rod to the steering colum and prevent from twisting motion of light rod. Model can be printed in many materials without any support. I try…
I lost the top piece to my TaoTronics humidifer. This is a good, maybe even better… replacement. Here is the product description from Amazon: "TaoTronics Cool Mist Humidifiers for Bedroom, 6L Humidifier for Home Large Room, 1M High…
Hi, To protect rear mudguard I made special feet. 5 holes made in model are aligned wit orignal holes in deck. I reccommend to use PETG due to temperature restistance. Bottom layers = 5 (which is top layer after printing Infill 20%
Convert your AKG M220/K240 to bluetooth with a Taotronics TT-BR009 AptX Low Latency Bluetooth Receiver. Taotronics TT-BR009 https://www.amazon.com/TaoTronics-Bluetooth-Receiver-Hands-Free-Wireless/dp/B07BLQ47MY/ Category: Audio
3 layers Top/Bottom: 6 layers Infill: 40% 6 pcs M3 heat insert
No need to cut or solder the 1m usb/can cable supplied with the newer Bigtreetech SB2209 CAN/USB versions, use this instead of the original pg7 mount. To stabilize the cable, you can use a 0.8mm diameter steel spring wire. The BTT SB2209…
FLCL - Haruko - Naota - wall art
Holder for attaching an external microphone to the Taotranics TT-BH085 headset.
Pour ceux qui ont une Trottinette Laotie ou une Angwatt C1 ou F1 comme moi, et qui ont un cadenas en U Btwin 920 de chez décathlon de 1,717 kg ben voici un support pour le centrer sur la colonne de direction. La partie avant est à…
Unleash pure chaos on your desk with this stunning 3D printable statue that captures Jinx's wild energy in incredible detail! This meticulously crafted STL model showcases the beloved League of Legends champion wielding her iconic rocket…
It's a shame that Age of the Primes Nexus Prime could only connect (by default) to Superion, so let's try to remedy that with a connector set for Bruticus! This connector set comes in two parts, with a lower bit that connects the two…
Crest of the Garrison Regiment from Attack on Titan modelled in Solidworks for printing as a dual extrusion/multi material print. I have uploaded the Solidworks files should anyone wish to tweak the model and make changes to have the…
Crest of the Military Police Regiment from Attack on Titan modelled in Solidworks for printing as a dual extrusion/multi material print. I have uploaded the Solidworks files should anyone wish to tweak the model and make changes to have…
You need Glue. The bearings (608) are from https://www.printables.com/@Jerryie: https://www.printables.com/model/583731-print-in-place-ball-bearings
This mount allows you to mount this TaoTronics Bluetooth 5.0 Transmitter/Receiver Bluetooth device (model number TT-BA08) with the magic of magnets. I don't know if this will actually be of any use to anyone as the device appears to be…
This Chaotic Pendulum Hand Spinner is a compact, hand-held physics toy that demonstrates chaotic motion in an intuitive and playful way. By combining rotational motion with an offset pendulum mass, the spinner produces complex,…
An attachment for a TaoTronics Tablet Stand TT-HS07 for holding my phone instead of the ipad. To use it yourself you will need to use OpenSCAD and enter your phone dimensions. Since most phones have a extending camera you will also…
Inspired by Naoto Fukasawa's original design from 2005, this is a playful take on a pencil holder. There are 12 holes for pencils, and works very well as an art object if you use the same pencils or pens. As far as I can tell, the…
A simple Endstop Bracket for Dragonburner with Chaoticlabs CNC Kit.
Creates the AOT Season 4 main poster
Other Z Chain Transpose Mods mount to the traditional rear aluminum extrusion which Chaoticlab Carbon Fiber gantries do not have, of course. Here are Loogle's gantry mounts for both 15mm Generic and iGUS XY chains, plus Michael Browne's…
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
Print flat on bed with supports. The feet clip into existing slots in heel for a firm fit. RISK of stressing/damaging slot depending on tolerances of print. Tab can be easily cut off if desired, but feet may not hold as securely on…
I am currently using a XOL toolhead with Chaotic lab TAP v2. The mount for the Eddy mount from the BTT github is out of the recommended height difference (2-3mm) between the nozzle tip and scanning surface of Eddy because i am using a…
![Wireless Earbuds Dock [Taotronics]](https://media.printables.com/media/prints/188566/images/1756694_41891510-24b8-48a7-88cb-846838c7e84a/large_display_b092_pic1_188566.jpg)
