4648 modeli
I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 New version of the Z-axis top with additional ball bearing for more stable guidance of the trapezoidal spindle. I don't know if you really need it…
Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore --- I released a new version with only two screws --- Fits on Prusa MK3 MK3s MK3s+ Fasteners: 1x M3x20 screw 2x M3x10 screw 3x M3 hex nut 4x M3 Nyloc hex nuts 4x…
This is a simple dust cover for the Z-axis mounts. They drop in place, and prevents most of the debris from falling into the Z-axis mount opening. Update: People noted that the clearances wasn't working perfectly anymore, so I checked the…
Thanks to inks007 for this well made design (Thingyverse thing:2969556). I used it for with Igus drylin RJ4JP-01-08 bearings. And it works very well so far. I upgraded the x- and y-axis with RJ4JP bearings and it's super quiet now,…
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…
Bambu Studio Strength Walls Detect thin wall “ON” Bambu Lab Z axis cover for P1P P1S X1 Thank you ;-)
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…
This model includes two replacement parts for the RC Monster Truck from Monster Jam Gear and axis which connects to the wheel The main gear which connects to the motor The positions of both gears are shown in the picture with an arrow.…
Remix to add a feet to add additional support to the Z-Axis mount. The original feet for the back right for the control box is still recommended as well due to the weight distribution. Print instructions Printed in PETG @ 0.2mm layer…
This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…
This is a Z-axis guide with a thumbwheel that makes it easy to move the print head. This guide consists of two parts th
all in one Orange parts for mk3 to mk4 upgrade
I have gotten a lot of dust and filament scraps down into the deep holes of the z axis motor holder on my MK4S and I wanted some way to stop it from happening. I searched around Printables and found quite a few that I liked, but I thought…
Quick settings for those who are in a rush: PET-G, 3 perimeters, 20% cubic infill, 1 mm top and bottom, I made them with 0.2 mm layer heights but you can also make them with 0.3 mm layer height Also for the Y stepper mount you'll need to…
Prusa Mk4 Z Axis flat dust or debris or filament cover. This is a simple cover to prevent filament or debris from falling into the open holes in the tops of the z axis motors. There is no need to disassemble anything, these just fit into…
Prusa Mk4 Z Axis dust or debris or filament cover. This is a simple cover to prevent filament or debris from falling into the open holes in the tops of the z axis motors. There is no need to disassemble anything, these just fit into the…
This is a measuring tool for easily determining the Z-axis offset. I wanted to level the print bed of my Core ONE and print the following model: However, it is not easy to measure the distance with a caliper, so I printed this model to…
I saw the other satellite dish and looked at the stl file but didn't like it so I made a new one. my first proper 3d object using tinkercad. It uses a 6mm x 3mm magnet to attach to the z axis stepper, print with supports on. Seti here we…
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
This ballerina rotates with the movement of the Z axis. As a prerequisite, you will need a "z-axis-top" with a hole for the leadscrew rod as below. https://www.printables.com/model/389924-mk3ss-z-axis-top…
Background When I first built my Prusa i3 MK3S+ and already having a standard Slice Engineering Mosquito hotend , I opted to immediately upgrade the stock extruder / hotend assembly to utilize Bondtech's BMG Prusa upgrade kit (specific to…
This model will print in 33 minutes. It allow testing your z-axis for wobble on a 125mm tall part. It will also challenge you bed adhesion but should print without any issue if your printer works fine.
Original Prusa i3 MK3 X-axis motor cable strain relief with added catch on motor flange. !Not compatible with Bear Upgrade! originally: https://www.thingiverse.com/thing:3433554 remixed from: https://www.thingiverse.com/thing:3216603…
This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…
Just print it in the orientation it comes, unbolt the top rail press it onto the end (you may need to hammer it lightly), then lower it back on over the rod and put the bolts back in. There is also a skeletonised option just because why…
I don't like seeing the upper parts of the Z-axes lift during Z calibration, so I remade them to be stronger in the style of the MK4. Trust me, they're solid!
A strengthened remix of 3D-Fuchs' cable guide with longer support. I found the original support too short so I remixed to lengthen it. While I was at it, I decided to strengthen the support to reduce flex, and also made the mount thicker…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 I was not so happy with the existing solutions for logitech webcam holders so I thought about it and created a new design and solved another…
This is V2 with 20mm Mounting Hole Distance for the new Cloudray K40 Laser Head with FL 25.4mm and FL 50,8 mm. It fits to my K40 Laser X Axis Carriage Base. K40 Laser X Axis Carriage Base von EinfachUli | Kostenloses STL-Modell…
The Prusa MK2/3 Series has had many toppers made for the cutout hexagon on the top of the Z-Axis. These parts are the exact same Stock MK4/S models, with the exact dimensions of the original Hexagon cutout from the previous MK2/Mk3…
Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…
Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…
This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
I designed these to add a bit of variation and help make dust less noticeable. Their main advantage is that nothing needs to be disassembled. They simply slide in from the side through their opening, fitting snugly without the need for…
On-Axis Camera Support for Ender 3 S1 Plus. The support is fitted and screwed onto the X-axis adjustment cover, robust, rigid, the camera remains firm and still. Printed in PETG Gcode file with all parameters for printing. Supporto…
For mounting the hotend on an MGN12C linear rail on the X-axis Creality Ender 3 V3 se Zur Montage des Hotends auf einer MGN12C Linearschiene auf der X-achse Creality Ender 3 V3 se
This is a small visualization for the axis cross of FreeCAD - you can use it to understand directions in FreeCAD. Per convention the FreeCAD axes are displayed in RGB: X axis - red Y axis - green Z axis - blue I would recommend printing…
Vor- und Nachteile auf einen Blick: + verbindung oder verlängerung von GT2 6 mm Zahnriemen + schmarl/klein/minimalistisch + Druckerfreundlich (Überhänge >55°, keine Brücken, etc.) + wiederverwendung von defekten Zahnriemen Einkaufsliste:…
Use at your own risk. This is a demonstration of makeability. I do not recomment using the product for nutrition. Be aware what you are doing. If you like to use the product for drinking, use a filament which is allowed for alimentation…
The shape of the bear is inspired by the logo of Grégoire Saunier's Bear Frame project (which of course is inspired in turn by the Haribo gummy bears included with Prusa printer kits!) I printed mine lying on its back, but it could also…
Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…
This X-axis bracket is designed for the Prusa MK4 and is an adapter for Sneaks articulating Raspberry Pi camera arm and for an optional reverse bowden tube for the MK4 (there is a .stl file without the reverse bowden adapter). Due to its…
Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…
Remix of TommiV's knob design that is completely blank and doesn't feature a logo. Use the included profile in the 3mf file to get the correct settings for the print. Fits snugly over the stock knob. The front panel is the Honey Comb…
A simple remix of shinwachi X-axis strain relief for the Prusa mini. I simply opened up the ziptie hole that clamps the strain relief to the stepper motor to allow for larger zipties. The update FreeCAD file is included. Updated…
This is a remix based on the original Caribou parts for the all 10mm axis printer to fit a Caribou printer with 8mm X-axis and 10mm Z-axis. The motor holder is ready for the X-axis cable chain. Here you'll find the original Caribou parts:…
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports and colour change enabled. Matching Z-Axis model is here →…
This is Prusa MK4 Z-Axis Temperature & Humidity Panel Mount. It is one of many my designs but first upload ever on Printables.com. Plug and Play. There is no need to modify printer in any way. Model is created with FreeCAD and exported to…
Originaly designed for my CTC printer (clone of the ender3 but way too bad product)
This is a replacement part for the Saitek Flight Rudder Pedals – specifically, the spring holder for the brake axis. The original plastic part broke at the point where the return/centering spring is attached. This 3D printed model is a…
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports, colour change enabled and 2 objects. Matching X-Axis model is…
I always liked the idea of the iOS settings icon on top of a stepper, but didn't wanted to cover my extruder stepper, because of the cooling of the motor bottom. Then I found the solution from Félix but it doesn't fit on the bear motor…
Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…
I designed this dual axis movable thermometer holder for my infrared monitored enclosure. No supports needed! I integrated all in the model. Print an use. ;) thermometer cut out: 48 x 26 mm Features: dual axis movable print in place fits…
Print as oriented and clip into place. Note that the version in the photos is very slightly misaligned, but that issue has been corrected in the finalized model (but it works well enough for me so I didn't bother reprinting). Original…
Suggest to print with higher infill percentage and stronger material as the tall part breaks easily while inserting.
This model is compatible with the z-axis support and spool holder linked in the remix section of this description. It replaces the foot mount right behind the screen you will also need to print two of the foot-01.stl files and one…
Mounting adapters for Wabeco F1210SF mill. 2 distance blocks attach a 200mm Siton NTS-S Series scale to the Y-axis. A slider bar holds the reading head. Adapters use factory M4 threaded holes - no drilling and tapping needed.
PTFE tube Z-axis holder with fixed PC4-M6/PC6-M10 pneumatic connector fittings.
DRO Z-Axis mounting adapters for Wabeco F1210SF mill.
I made this calibration tower right after I switched to klipper. And boy it makes a difference. It has a little overhang and distance test (0.2mm) too. Dimensions: 20/30x40/50x60mm. Printed on an Ender 5+, BTT SKR E3MINI V3.0, Klipper,…
As voor de Sencys (Praxis) houder voor afplaktape + afdekfolie 1,1m x 33m
Der hier dargestellte Text ist zur Dekoration in einer Praxis gedacht. Habe ihn bei meinem Zahnarzt aufgestellt. Der rote Text und das Herz sind separat druckbar und können eingesteckt werden. Bei mir hat es sehr gut gepasst. Habe das…
24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
With this mod, you can place Creality's Nebula camera on your Ender 3 V3 KE without the need for screws or similar parts. Inverse Version: Simply rotate the camera 180º on its own stand to invert the image, no need to make any adjustments…
Dust cover for Z axis bearings. Prevention is better than cure.
Update: From what I can tell looking at the MK4S R2 parts, they haven't changed at all. So the MK4 dustcovers should fit just fine on the MK4S. Unless if the X-axis go lower down on the MK4S than MK4, then it might be a problem. But I…
This is a precision 20mm XYZ calibration cube which improves on the typical calcube. There are two issues with the typical cal cube: 1) Hard to make an accurate Z axis measurement because either you have error from the squish of the first…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Z-axis brace to stiffen up the Z-axis of the Prusa Mini 4pcs M5x12 and 4pcs t-nuts for mounting, optional is a M5 washer (10mm OD , 1mm thick) Thick version need 2pcs M5x25 and 2pcs m5x12. UPDATE : Added .f3d file for remixing purposes..…
This is the original Z axis cover for the Bambu Lab X1C ! :) These Z axis covers protect the top F625Z bearings on the threaded Z axis rods in the Bambu X1 and X1 Carbon… The walls are pretty thin… so, you may need to enable “Detect thin…
A support brace for the Prusa MINI to stiffen the connection between the Z-axis and the Y carriage. Attach to the 3030 aluminium extrusions using M5 x 12 mm hexagon head cap screws and T nuts (available on Amazon, eBay, AliExpress, etc.).…
The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…
I believe that robotics has not permeated every day life because of the large costs generally associated with it, so I wanted to design 6-Axis Robotic Arm from the ground up. I wanted it to use 3D printing as much as possible. Everything…
Printed with wall line count at 2-3 and 20% infill. The original file has been uploaded. (FreeCAD)
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
This robot arm is (very) roughly styled as an 80% scaled version of the UR3 industrial robot. It uses the same design philosophy of simply placing a motor/reducer actuator unit at each joint, with six actuators stacked up to make a 6-axis…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
Here's my 'Mk2' Vertical Axis Wind Turbine (VAWT). I've always liked the lines of these, but they really caught my attention a few weeks ago when I realised that I couldn't explain how they work. I'm now a lot less confused about how a…
Cable Clips for the X-Axis. Print Intrusions: PLA or better 100% infill Pair well with this one. This will protect you X Axis Cable from damage. Anycubic Tie Wrap Replacement for X-Axis
Support for z-axis of Prusa MINI printer. Inspired by https://www.prusaprinters.org/prints/51415-prusa-mini-z-axis-brace/ . You will need: 6pcs M5x12 ISO 7380 bolt ( https://www.ebay.com/itm/232247392111 ) 6pcs M5 t-nuts Print…
These are the files provided on the storage that comes with Sonic Pad. In case you deleted them or if you want to print the bracket that matches your printer before you receive it. Edit: I've added more file available from Creality…
Redid the mount to make it way better to print. You need no supports just print it flat on it's back. The new file is the v3 I also raised it slightly so if you want to go full cable chain it will work now on the neptune plus and max :) .…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
This is my version of a Z-axis stabilizer support for the top of the Z-rod. This version uses a 608RS bearing which fits snugly. I am using 2 t-nuts and M4x12 hex head screws to attach to the Ender 3 top 2020 extrusion rail. Print…
!!! Important !!! : Be careful if you take the bed to the bottom as the bed will skip teeth in the belt because the bed hits the bearing covers. If you want to use this mod you have to change the Printable height parameter in the slicer…
Slice using your own settings. You should use the same settings that you would normally use when going for dimensionally accurate parts. Take 6 measurements and let the calculator do the rest. Use this calculator: link No need to request…
3D printed robotic arm with a video tutorial on youtube. I’ve developed a 6 axis robotic arm that can lift up to 150g with an amazing precision of 0.2mm thanks to stepper motors. This arms is my first project to develop a solution for…
I wanted something beautiful to somehow hide the stepper motor there. I combined and put the cable as high as I wanted from the beginning to have a smoother curve, without disturbing anywhere else and more good position for cable chain .…
X gantry model I recreated of the Ender 3/pro/3v2/CR10 (v1) Holes are perfectly aligned, I then used this to design shrouds (like the MarsOrbiter, SaturnOrbiter and ApolloLander, of which I never received any complaints regarding mounting…
I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
Elegoo neptune 4 z-axis stabilizer was made from the front part. This time it is connected both ways.
