Wyniki wyszukiwania: b36

Sortowanie

468 modeli

P
PrintablesMHe

Wall Mount for MAKITA Cordless leaf blower DUB184 or DUB362

I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…

Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu

Pobrania
517
Polubienia
19
Ocena
5
P
PrintablesUloPe

Voron 0.2 Kirigami EBB36 mounts

The Bigtreetech EBB36 can bus board is normally intended to be used on the extruder. However it also fits pretty nicely into the cutout of the Kirigami sheet metal bed mount. This are two small support brackets that attach to two of the…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
18
Polubienia
11
Ocena
0
P
Printablesdjos_1475

EBB36 Mount with Cable Strain Relief for the Orbiter v2.0

A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. It's designed to be printed in ABS, as the little LDO motors get Hot, and to be attached via a Female-Female M3x15mm (if you have an OS2) or M3x20mm Hex…

Pobrania
2517
Polubienia
216
Ocena
4,73
P
PrintablesTeachingTech

Print in place tank body (FAB365 style)

The articulated tank chassis by EXTREME3DPRINT is available for purchase here: https://cults3d.com/en/3d-model/gadget/pipbot-1-print-in-place-robot Inspired by the models from FAB365: http://www.fab365.net/ My design process is covered in…

Pobrania
1721
Polubienia
420
Ocena
4,88
P
PrintablesJR Lomas

EBB36 Cover

Here is an EBB36 cover. I found some of the cables going to the board in the rear would interfere with the rear right back corner of my Voron v2.4 while homing if not inside of the cover.

Pobrania
1537
Polubienia
182
Ocena
4,91
P
PrintablesNadir @ CN3D

CAD File for BIGTREETECH EBB36 CAN V1.1_1

here you have the CAD file for the EBB 36 CAN board hat If you want to buy this awesome tool board use this affiliate link http://shrsl.com/4t5zy and you will support our work

Pobrania
1499
Polubienia
69
Ocena
0
P
PrintablesZachary Bedell

Big Tree Tech EBB36 (v1.0) Stealthburner mount

This model is currently for the 1.0 version of the EBB36 board. The screw and strain relief positions changed on the 1.1 & 1.2 versions. The Big Tree Tech EBB CANbus boards are a nice way to cut down on wiring to the toolhead. They're…

Pobrania
1111
Polubienia
91
Ocena
4,4
P
PrintablesMrTeliP

EBB36 Strain Relief Bracket

This is just a small strain relief bracket I made specifically for my Voron V0.1 where I did not want to use a bulkier cable gland. The umbilical for the V0.1 is very short and lightweight, so this works well to secure it. I wouldn't use…

Pobrania
1070
Polubienia
95
Ocena
5
P
PrintablesCoxie

Big Tree Tech EBB36 V1.2 Bracket & Strain Relief for Stealthburner

I loved Zachary's model however noticed the new V1.2 of the BTT EBB36 board is larger and the model doesn't fit the board, I recreated a new version in Fusion360 for the new dimensions and it works a treat :)

Pobrania
1031
Polubienia
85
Ocena
5
P
PrintablesKotvic

EBB36 mount for Voron Stealthburner

This is my take for EBB36 canbus board holder for Voron Stealthburner. I have taken model from Coxie and pretty much redesigned it. Now this mount is thicker, more rigid and uses M3 screws to clamp cable. Print with standard Voron…

Pobrania
1031
Polubienia
106
Ocena
4,5
P
PrintablesEsoterical

EBB36 JST Splitter for dual part cooling fans

This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc). There are two types of the main body. One designed to fit in the space on an…

Pobrania
905
Polubienia
223
Ocena
5
P
PrintablesMartin Šustr

Fab365 Millenium Falcon stand

Simple stand for model of Millenium Falcon created by GOODESIGN from website Fab365. https://fab365.net/items/277 stand is 115 mm tall and useable for rear left pocket for landing gear. Model is rotated 5 degrees down in front direction…

Pobrania
868
Polubienia
102
Ocena
5
P
PrintablesBlargedy

EBB36 mount for Orbiter 2 and PG7 Gland, Optimized

***Important update*** I uploaded the wrong file so please redownload if you grabbed files before 2024-03-04 There were a couple things I didn't like about the original design. I found the walls of the gland threads had unusably thin…

Pobrania
834
Polubienia
71
Ocena
5
P
Printablesah10smq

EBB36 Mount Orbiter v2

EBB36 Mount Orbiter v2 with PG7 Cable Gland -- Remixed from https://github.com/KayosMaker/CANboard_Mounts --

Pobrania
757
Polubienia
76
Ocena
5
P
Printablestherick

WWG2 NH36/EBB36 PUG mount

NH36/EBB36 WWG2 mount for PUG I find PUG to be far superior to PG7 mounts, so made this guy. Additionally, the NH36 connector sticks up really high, so this also lowers the cable a bit. This is based off tetsu and Thor's existing canboard…

Pobrania
729
Polubienia
114
Ocena
5
P
PrintablesRoed

EBB36 PG7 Mount behind NEMA14 stepper

Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…

Pobrania
726
Polubienia
103
Ocena
4,8
P
Printablesah10smq

Bigtreetech EBB36 Stealthburner mount with gland

Print with Voron default settings. If you get problems with your threads, use higher fan speed. Don't forget the heat inserts from the original model.

Pobrania
713
Polubienia
70
Ocena
4,5
P
Printables3dKaos

BTT EBB36 Umbilical Strain Relief for Stealthburner

BTT EBB36 Umbilical Strain Relief for Stealthburner Works both as a mount for the BTT EBB36 on the Steathburner CW2 but also has strain relief. Mix of two other makers models. Requires two m3 heat inserts 3 versions - 58mm, 65mm and 70mm…

Pobrania
694
Polubienia
59
Ocena
5
P
PrintablesRoed

Voron Stealthburner with CW2 - Door and mount for BTT EBB36

On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…

Pobrania
654
Polubienia
82
Ocena
5
P
Printablesonsimon

Orbiter V2 BTT EBB36 mount

Needed a bit more vertical clearance for the EBB36 on my StealthChanger build so I created this mount/carrier for it and also tried to get it as rigid as possible with just the two mount points. There are two versions, one where the EBB3…

Pobrania
649
Polubienia
63
Ocena
5
P
PrintablesYuriO

Rigid EBB36 v1.2 mount on Voron CW2 / Stealthburner - Tested on VT

This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on…

Pobrania
622
Polubienia
64
Ocena
5
P
Printablesryandam

Voron 0.2 Bigtreetech EBB36 toolhead mount

Voron v0.2 toolhead mount for Bigtreetech EBB36. Note: remote intergrated strain relief plate support before assemble.

Pobrania
580
Polubienia
92
Ocena
5
P
PrintablesYanno

Wall mount for Makita DUB362 Leaf Blower

Wall mount for Makita DUB362 Leaf Blower no support need the design was made to store it with or without battery

Pobrania
579
Polubienia
62
Ocena
5
P
PrintablesAndreDesigns

Voron 0.2 BTT EBB36 toolhead mount with strain relief

If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I remixed this part, because the original was great by design, but was missing a strain relief. so here it is. also use the original or 18mm…

Pobrania
558
Polubienia
76
Ocena
4,88
P
PrintablesKrzysztof Nowak

EBB36 CanBus Board Mount for VZBot Printhead CNC V2

A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC V2 It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…

Pobrania
554
Polubienia
52
Ocena
0
P
Printables10suo

EBB36 Cooler

I was unhappy with the temperatures my EBB36 was reporting when running longer prints in a well insulated chamber. So I whipped up this quick mount for a 3010 fan that also attaches the EBB36. You will need 2x M3x35 or longer screws to…

Pobrania
553
Polubienia
92
Ocena
4,33
P
Printables3DPrintDemon

Yavoth Toolhead Demon Remix For Rapido 2 UHF, Orbiter 2, BTT Eddy, EBB36, Voron, SV08

Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…

Pobrania
537
Polubienia
227
Ocena
5
P
PrintablesTim Z

BTT EBB36 & 42 Gen2 USB Adapter Rail Mount

Rail mount for the BTT EBB36 and EBB42 Gen 2 USB adapter. 12/31/2025: Added model with 2.8mm screw holes instead of heatsink inserts Uses: 4x M3 Heatsink Inserts (not needed for "no-inserts" version) 4x M3x6 Bolts 2x M2x8 Screws Uses this…

Pobrania
518
Polubienia
53
Ocena
4,83
P

EBB36 VZBOT VZ235 VZ330 MOUNT - NEW BEACON DUCT

HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…

Pobrania
456
Polubienia
58
Ocena
5
P
PrintablesPrintStructor

Archetype Blackbird Toolhead (WIP) - bambulab hotend with 30mm fan, VZ-hextrudort, Fysetc CNC TAP, custom faceplate, EBB36

This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…

Pobrania
449
Polubienia
117
Ocena
0
P
PrintablesRoed

Voron Stealthburner Umbilical - Door, mount for BTT EBB36 and gland

On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…

Pobrania
425
Polubienia
59
Ocena
0
P
Printablesjustascratch

voron 2.4 canbus cover for btt eb36 and mellow fly sht-36 (v2)

added a fan without srews (tight fit) and strain relief with seperate cable holder and some extra space at the back for the fan mos for the mellow fly . Fan size 3010 strain relief uses 3mm bolts with hexnut. Update* new cable strain…

Pobrania
408
Polubienia
92
Ocena
0
P
PrintablesB A

Bigtreetech BTT EBB36 GEN2 Orbiter v2 A4T toolhead mount

EBB36 GEN2 Mount for A4T Toolhead with Orbiter v2 / v2.5 Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. This is a remix of the original A4T THB mount from Armchair…

Pobrania
404
Polubienia
44
Ocena
5
P
PrintablesHenryA

EBB36 mount for Voron Stealthburner (CW2)

This is my take on EBB36 canbus board holder for Voron Stealthburner. I have taken the model from Kotvic (Thank you!) and pretty much redesigned it to address some issues I have found with the original model: Heat inserts holes were too…

Pobrania
404
Polubienia
50
Ocena
5
P
PrintablesJR Lomas

EBB36 Galileo 2 Standalone Mount

EBB36 mount for Galileo 2 standalone extruders

Pobrania
394
Polubienia
46
Ocena
5
P
PrintablesH.Rah

EBB36 Orbiter v2 PG7 strain relief

Made this strain relief for my Xol toolhead, but it will work for any tool head that uses the Ebb36 and Orbiter v2.

Pobrania
394
Polubienia
35
Ocena
5
P
PrintablesKuna

Voron Stealthburner CW2 EBB36 cable door with fan

closed cable hole on top added 30x30 fan with mouning holes Now nicely closing all cables with the EBB36 mod on Stealthburner.

Pobrania
381
Polubienia
57
Ocena
0
P
PrintablesBleach

EBB36 Stealth Burner mount with Drag Chain

So i got the EBB36 v1.2 and usually people use it with Umbilical, but i wanted to use drag chain instead and i couldnt find a decent one, the ones that i found usually had the canbus sitting so low that the heater wires would rub against…

Pobrania
377
Polubienia
38
Ocena
4,5
P
PrintablesEsoterical

WWBMG EBB36/NH36 PUG Mount

A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Wristwatch BMG extruder. The original PUG download page (for the gland itself) is at…

Pobrania
374
Polubienia
61
Ocena
4,75
P
Printablespjhutch

Gigabyte B360M DS3H IO Shield

I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…

Pobrania
372
Polubienia
7
Ocena
3,5
P
Printablesniefachowy

EBB36 mount for Orbiter 2.0

Edit: 20.03.2025 - add STEP file EBB36 bracket for Orbiter 2.0 I don't like flat and high mounts so I propose my vision. BOM 4x M3 threaded inserts (i use M3 x 3.0) 1x flat head M3x5 screw for install a cable holder 2x socket head M3…

Pobrania
354
Polubienia
64
Ocena
5
P
PrintablesNoah's Prints

ASUS ROG STRIX B360-I mini-ITX Motherboard

1:1 of the ASUS ROG STRIX B360-I GAMING mini-ITX Motherboard.

Pobrania
347
Polubienia
14
Ocena
0
P
PrintablesB A

WWBMG Bigtreetech BTT EBB36 GEN2 A4T toolhead mount

UPDATE: Cable relief geometry fix in v5, cable is more centered now. Some other minor geometry fixes. Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using a WWBMG extruder . This is a remix of the…

Pobrania
342
Polubienia
50
Ocena
4,5
P
PrintablesTom's Basement

EBB36 Orbiter 2.0 mount for Voron V0

This will allow mounting an EBB36 board on your V0.2, the cable can be fixed with a zip tie and everything is designed to be installed without heatset inserts ! There are two versions of spacers : one for Orbiter filament sensor and one…

Pobrania
339
Polubienia
43
Ocena
0
P
PrintablesAmateurCAD

Ebb36 Mount with PUG support

Both great models just changed slightly so the mount is compatible with the 6.5 mm PUG

Pobrania
335
Polubienia
33
Ocena
0
P
PrintablesMaverick Ng

Voron 2.4r2/Switchwire EBB36 CanBus LGX lite for cable chain remix

Mixing using EBB36 and LGX lite with cable chain hook.

Pobrania
333
Polubienia
34
Ocena
4
P
PrintablesKepleRPL

Back enclosure for Stealthburner with LGX Lite, EBB36 and PG7 umbilical

A mod focused on fitting all hardware of LGX Lite extruder, BTT EBB36 (V1.2) board and umbilical PG7 mount in one fully enclosed and ventilated case. Used parts of toolhead from: - Eytecz's LGX Lite mount - Voron's repo including…

Pobrania
333
Polubienia
45
Ocena
4
P
PrintablesMaverick Ng

Voron Stealthburner LGX lite ERCF EBB36 v1.1 or 1.0 cover

A mod for Voron Stealthburner LGX lite ERCF EBB cover. For those user that using BTT EBB36 v1.1 or v1.0 CanBUS board. Hardware BOM: Qty: 2, M3x30

Pobrania
326
Polubienia
32
Ocena
0
P
PrintablesByteWelder

Umbilical Plate (V0.2 Dragon Burner + EBB36 + Sherpa Micro)

Used in a Voron 0.2 setup with: Dragon Burner BTT EBB36 CAN board - **warning**: not compatible with max31865 for now! Sherpa Micro extruder BOM: 2x 25mm aluminum standoff 4x M3 x 6 mm BHCS 2x M3 x 10 mm BHCS 2x M3 x 4 x 5 mm heat insert…

Pobrania
320
Polubienia
54
Ocena
5
P
Printables6d6178

EVA 3 EBB36 Mount for LGX Lite Extruder

This is a mount with strain relief to use the Bigtreetech EBB36 toolhead PCB with an LGX Lite extruder on an EVA 3.x carriage platform . This is a remix of the mount for the Orbiter 2.0 extruder by Iatraliptes . I recommend using a USB…

Pobrania
319
Polubienia
33
Ocena
5
P
PrintablesEsoterical

G2SA EBB36/NH36 PUG Mount

A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…

Pobrania
313
Polubienia
54
Ocena
5
P
PrintablesEsoterical

Orbiter 2 EBB36/NH36 PUG Mount

A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with an Orbiter 2 extruder. The original PUG download page (for the gland itself) is at…

Pobrania
307
Polubienia
54
Ocena
0
P
PrintablesEbraptus

DIN Rail Bracket for BTT EBB36/EBB42 GEN2 USB Adapter Board

DIN rail bracket for the BigTreeTech EBB 36 & EBB 42 GEN2 USB Adapter board. Designed to use (4x) m3 heat set inserts. DIN Rail Clip Used

Pobrania
307
Polubienia
23
Ocena
5
P
PrintablesHenryA

VZ-Hextrudort-Low + EBB36 mount for Voron Stealthburner

I have recently bought a VZ-Hextrudort-Low extruder and needed a new mount (along with a new upper Stealthburner body). Didnt find anything that I like and I was already satisfied with my SB mount so… I made a remix for that same mount.…

Pobrania
303
Polubienia
41
Ocena
0
P
Printablesphlab

Galileo 2 BTT EBB36 Mount for Stealthburner Version 2

A mount for the EBB36 to mount the can board on the back on the Galileo 2 extruder. Version 2

Pobrania
303
Polubienia
26
Ocena
5
P
PrintablesKrzysztof Nowak

EBB36 CanBus Board Mount for VZBot Printhead CNC with PG7 mount

A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5…

Pobrania
301
Polubienia
26
Ocena
0
P
PrintablesRenakaiP

V0 Sherpa Mini EBB36 Toolhead Mount Remix (UPDATED - Ver. 2)

UPDATE: Version 2 uses the same holes that mount the EBB36 to interface with the extruder mounted standoffs and moves the bottom holes approximately 16mm downward to create more clearance for hotend wires from the terminal block. The…

Pobrania
297
Polubienia
17
Ocena
0
P
Printablesdjos_1475

EBB36 Mount with Cable Strain Relief for the Orbiter v2.0 - Metal Version

I've simplified this design for easier milling on a CNC Machine or metal 3D printing. A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. The EBB36 mounting holes are designed to be tapped with an M3 tap. It's…

Pobrania
290
Polubienia
25
Ocena
0

WPL B1 B16 B36 JJRC Q60 Q61 or similar wooden artillery crate

I came across this on Tinkercad, but it contained quite a few errors in the model, misaligned bits etc. So I cleaned it up and made it more printable and now it lays flat on the print bed, the slats are properly meshed with the crate body…

Pobrania
288
Polubienia
31
Ocena
5
P
PrintablesRick269

FAB365 Star Destroyer display stand

This is a display stand for the excellent (Free to download!) FAB365 Star Destroyer model (Designed by GOODesign studio). https://fab365.net/items/505#inform I actually thought this was going to be easy but the centre of gravity is not…

Pobrania
287
Polubienia
32
Ocena
5
P
PrintablesBryan Veloso

Turbiter with EBB36/SHT36 Side Mount

This modification allows for mounting of the CAN board on the side of the Turbiter. You will need 2 M3 heat set inserts to mount the board. As a Voron 2.4 owner, I wanted to run the Turbiter mod for the Orbiter 2.0 so I could run the…

Pobrania
282
Polubienia
47
Ocena
5
P
PrintablesBenditandsendit

ebb36 Mounting w/ Cable Clamp

Please note: I've designed this while away for work so I haven't had a chance to try it out for myself, but if anyone has a chance to give this a go for me, any feedback would be greatly appreciated!…

Pobrania
281
Polubienia
33
Ocena
4
P
PrintablesPirey_br

Fly sht 36 v2 EBB36 1.2 canbus Vz Hextruder Mount with PG7

This 3D printable file provides a precise and efficient solution for mounting either the EBB36 or SHT36 canbus board onto the Vz Hextruder CNC, complete with a PG7

Pobrania
275
Polubienia
28
Ocena
0
P
PrintablesBen Winfield

BTT EBB36 Gen 2 USB Din Mount

Din mount for the usb adapter board. Can use normal din clip or heat insert type

Pobrania
273
Polubienia
26
Ocena
5
P
Printableshappy_mfg.

horizontal drag chain ebb36 xol

a horizontal drag chain mount for the ebb36 on a xol toolhead

Pobrania
273
Polubienia
63
Ocena
5
P
PrintablesMartin Labis

Voron V0.2 fan for EBB36

cooling for EBB36 v2 - fan shifted for better access to the IO pins

Pobrania
267
Polubienia
57
Ocena
5
P
PrintablesSputnikOC3D

LGX Lite & WWG2 - Mello Fly SHT-36 Max V3 / EBB36 Style Toolboard Mount - Voron Stealthchanger

Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…

Pobrania
265
Polubienia
28
Ocena
0
P
PrintablesTommhh

Makita leafblower wall mount DUB362

A simple wall mount to hang the Makita Leafblower DUB362 by using an existing hole.

Pobrania
262
Polubienia
17
Ocena
0
P
PrintablesDragi2k

Vz-HextrudORT + ebb36 adapter for Voron Stealthburner

This is a newly designed adapter for the VZ-HextrudORT paired with an EBB36 CANBUS board. an ercf filament sensor is integrated (if you want) a cooler for the board (if you want) It should also fit the FLY SHT36, but unfortunately I can't…

Pobrania
262
Polubienia
38
Ocena
4,5
P
PrintablesSvennixx

VZ Hextrudort LOW CNC EBB36 mount & VZ Toolhead PG7 Gland cable holder

After trying out another mount found here I noticed that the ebb36 was uncomfortably low. To point of risking a fire, the heater ports are too close to the VZ CNC Toolhead top plate. The can-board itself sticks out roughly 4mm above the…

Pobrania
252
Polubienia
31
Ocena
0
P
PrintablesPrintStructor

Archetype Blackbird Toolhead (WIP) - NF - CRAZY Volcano hotend with 30mm fan, VZ-hextrudort, Chaoticlab CNC TAP, custom faceplate, EBB36 Mount

This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…

Pobrania
248
Polubienia
65
Ocena
0
P
PrintablesAlvin Fung

BTT EBB36 Canbus Voron CW2 Mount (Moons pancake motor only)

This model is modified from KayosMaker canboard mount https://github.com/KayosMaker/CANboard_Mounts It is design specialised for mounting BTT EBB36 canbus board on Voron Stealburner CW2 and can still use dragchain for cable management…

Pobrania
247
Polubienia
32
Ocena
0
P
Printablesnzalog

BTT EBB36 Canbus Voron CW2 Mount (2 hole remix)

Remix to support a 2 hole drag chain. Update: Seems like the original 3 hole and the 2 hole remix did not work. I made a new version that's been tested now and works well. I did desolder, flip, then resolder the hot end heater connectors…

Pobrania
244
Polubienia
32
Ocena
4
P
PrintablesTwistedVyon

EBB36 pg12 mount and cover

EBB36 mount and cover for a pg12 cable gland. UPDATED: in the new model the cable gland mount screws on the ebb36 mount to make it more rigid and easier to disassemble, might make more changes later on. *****The canbus cable is soldered…

Pobrania
244
Polubienia
34
Ocena
0
P
Printablesdrpeej

EBB36 Gen2 Sherpa Mini Mount

The new EBB36 Gen 2 has a different type of CANBUS connector. I wanted a new bracket to hold the plug stable on the EBB36. I found a suitable design by @1word4WORDS_2139936 for the WWG extruder. This remix tidies up the design to suit a…

Pobrania
243
Polubienia
20
Ocena
0
P
PrintablesLightValen

Stand for Fab365 Tie Interceptor (Tie Fighter)

I started with version one by making the stand fit the Tie Interceptor exactly. This had a elogated base to shift the centre of gravity and stress supports to make the structure stronger. I then tried to simplify everything. It turned…

Pobrania
239
Polubienia
28
Ocena
4,67
P

EBB36 Gen2 WWG2 Mount

Is this modification well done? No… Does it work? Probaby. I couldn't find any mount for the WWG2 extruder that worked well with the new EBB36 Gen2 toolhead board. Hopefully someone makes a better design so you don't have you use this.…

Pobrania
237
Polubienia
29
Ocena
5
P
PrintablesMina

SHT-36 V3 EBB36 Toolhead Mount for the Mini Stealthburner

I needed strain relief for the connector on the FLY SHT-36 V3, but I wanted the board mount to be more rigid on the toolhead. So I added mount points for the bottom two attachment points on the x gantry.

Pobrania
232
Polubienia
14
Ocena
1
P
Printablesmorp

Voron Stealthburner Galileo EBB36 Side Mount

I didn't feel like removing my cable chains or worrying about Z chain clearance, so I made this side mount for the BigTreeTech EBB36 CAN board that fits on the galileo extruder . Print in orientations provided. You'll need three m3 heat…

Pobrania
232
Polubienia
35
Ocena
5
P
PrintablesAldoale

EBB36 - EVA 3 - Orbiter

the spacers must be cut to fit the orbiter stepper motor; it is designed to put the M3 4.6mm diameter brass inserts: I left a hole to display the led of my USB Type C; the possibility of fixing it with three screws to the EVA 3 support…

Pobrania
232
Polubienia
39
Ocena
5
P
PrintablesHero_Gamer_2119

WWG2 NH36/EBB36 Mount for PG7 Gland

This is an edit of the WWG2 NH36 Mount for PUG because i rather wanted to use PG7 and didnt find any other good models

Pobrania
226
Polubienia
22
Ocena
0
P
PrintablesRilmar

Orbiter V2 EBB36 Gen2 Mount

Mount for the EBB36 Gen2 for an Orbiter 2.0. Please see the original for more information. This remix has the additional lower mounting removed that can be used with the A4T. I'm looking to use it on a custom toolhead. The original would…

Pobrania
225
Polubienia
20
Ocena
0
P
Printablesalbo

Flat End Nozzle Attachment for DUB362 DUB362Z DUB362BM2 XBU02Z Makita Blower

Narrow end profile improves air speed for removing heavier debris such as wet leaves

Pobrania
224
Polubienia
17
Ocena
0
P
PrintablesDrEaD

Orbiter 1.5 Stealthburner Mount with CW2 shroud, PCB and EBB36 Support

I'm using Galileo for past two years, now converted to Orbiter 1.5 to more compatibility, but no found a step file with CW2 support but some to 2.0… This is based on the best I've found(IMO).

Pobrania
222
Polubienia
22
Ocena
0
P
PrintablesH3DA Components

Mount with USB strain relief for EBB36 CAN V1.2 and HGX Lite extruder and similares

Description Even high-quality USB-C cables can experience issues when the toolhead moves rapidly across the print area. The sudden movements and forces can create tension on the cable, potentially leading to intermittent disconnections or…

Pobrania
222
Polubienia
28
Ocena
5
P
PrintablescamelCaseOnly

Sharkfin Ebb36 Xol Toolhead Mount with Pg7

Xol toolhead exx36 mount with pg7 strain relief and additional bottom screw to connect to the xol toolhead carriage

Pobrania
220
Polubienia
26
Ocena
0
P
PrintablesRoed

Voron Stealthburner with LGX Lite - Door and mount for BTT EBB36

I recently switched to an LGX Lite extruder on my Voron. Since i use an EBB36 v1.2 i've remixed the door and mount for the EBB36 to have i fit nice and sit tightly on the SB. This way you can still use the door, have everything tucked…

Pobrania
215
Polubienia
33
Ocena
0
P
PrintablesFractal

EVA 3 EBB36 and EBB42 Mounts for Phaetus Apus Extruder

EVA 3 compatible mount of BigTreeTech EBB42 Toolboard and Phaetus Apus extruder. BOM Note: Some screws can be salvaged from the Apus itself EBB42 Item Qty Description M3 x 4mm Heat Inserts 13 6 for extruder mount, 7 for toolboard mount M3…

Pobrania
213
Polubienia
30
Ocena
5
P
PrintablesKotvic

EBB36 mount for Voron Stealthburner - LOW variant

This is my second take for EBB36 canbus board holder for Voron Stealthburner. I have taken my previous model and fully redesigned it. Now this mount sits roughly 20mm lower on Stealthburner body (that means 20mm more of Z travel for you),…

Pobrania
209
Polubienia
24
Ocena
0
P

EBB36 side mount for Orbiter 2.0

This will let you mount your EBB36 if there is no room at the back of the extruder.

Pobrania
208
Polubienia
30
Ocena
5
P
PrintablesJarhead

EBB36/SHT-36/Nitehawk Toolhead PCB PUG Mount

You will need 2x M3 heatset inserts for the PUG mount. Currently only have an LGX Lite, Sherpa Mini, and an Orbiter 2 mount but I can make more later in my free time. 2025-07-17: Added VZHextrudort High Mount and WW BMG

Pobrania
202
Polubienia
24
Ocena
5
P
PrintablesSamuel Taylor

Sherpa Mini EBB36 Reverse Mount

BTT EBB 36 Mount for Sherpa Mini to mount on the opposite side of the motor. This was originally designed for The Diamond Mount but could be used on any hotend mount. Includes top plate for diamond mount to route cables to the back of the…

Pobrania
197
Polubienia
27
Ocena
5
P
PrintablesMr Meatbeard

EBB36 FLY-SHT 3010 Fan

A quick 3010 fan mount to cool the most common 36mm pancake stepper CAN modules. Fits M3 heat inserts for mounting.

Pobrania
195
Polubienia
25
Ocena
5
P
Printablesinsonifi

EVA 2 + Orbiter 2.0 mount for BTT EBB36 toolboard

Mount aims to have more contact area with other parts of the tool head, predominantly the stepper motor. Fixtures: Heat inserts M3x4 shorts (additional) 4x M3 bolt; 2x from kit + 2x additional 2x M3 hex spacer (from the kit) PS. Bridges…

Pobrania
193
Polubienia
23
Ocena
0

CANBUS Toolhead Bracket for the VORON 0.2 with BTT EBB36

Print settings: Material: ABS/ASA Walls: 5 Infill: 100%

Pobrania
193
Polubienia
39
Ocena
4,5
P
PrintablesEsoterical

CW2 EBB36/NH36 PUG Mount

A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Clockwork 2 extruder. The original PUG download page (for the gland itself) is at…

Pobrania
192
Polubienia
28
Ocena
4,5
P
Printablesiainwlg

EVA3 Orbiter1.5 EBB36 mount

Based off of https://github.com/KayosMaker/CANboard_Mounts this has been modified to attach to the EVA3 cable holder and the orbiter attachment holes have been lowered to raise the toolboard up so there is enough space to attach the part…

Pobrania
192
Polubienia
15
Ocena
0
P
PrintablesEsoterical

Galileo 2 EBB36/NH36 PUG Mount

A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 extruder. The original PUG download page (for the gland itself) is at…

Pobrania
191
Polubienia
24
Ocena
5
P
PrintablesArteus Designs

WWBMG Nitehawk-36/EBB36 Inline Anchor Mount

WWBMG toolhead PCB mounts seem to be uncommon, and even moreso when you want the umbilical anchor to be inline with the bowden tube / central axis of the toolhead. This toolhead PCB mount takes care of that. Note: The relief is apparently…

Pobrania
191
Polubienia
27
Ocena
4,8