8053 modeli
Added a donation button for the people who want to buy me a coffee. Prusa Mini LCD backcover Protects against dust and dirt and keeps your PCB save Fits exactly Use a 3mm - 25mm screw Nice upgrade Step files included Print instructions…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[Update] ---2023/11/13--- New version released on here!! Flexi Humpback Whale - New Type(print-in-place) by 3D_Flexseeds | Download free STL model | Printables.com New model was created and the mouth was made to open and close. This is a…
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+
Wydruk około 8,39 €–10,25 € nettoWstępna wycena jednego wariantu
DO NOT PRINT or DOWNLOAD THIS TO SELL! I WILL HUNT YOU DOWN IF YOU DO. These Files were made for serious fans not for some Jerk to profit from my hard work. This is my version of Mr. Fusion from Back To The Future. I searched long and…
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
Great mount for attaching GoPro to a back pack, useful for front view of hiking or walking Smaller chest mount replacement when such an extreme mount is not required Print Settings 0.4mm Nozzle 0.2mm Layer height ABS or PLA Source:…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
I created it for my dad and thought it might be useful for others. There's a long finger one and a short finger one. Print instructions Change infill→fill angle from 45° (default) to 83° #edited 20231020
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am providing all required information and probably way too much for a simple clip . I recommend to read at least the installation and removal recommendations if you only intend to use the ready to print GCodes. Otherwise you should…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Make your photos of makes look more professional! These are holders to use with a large piece of paper to use to make a nice backdrop for photographing items. Please hit the like ♥ and post your make with the “Post A Make” button (below…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
It's from the movie "Back to the Future". I reduced the dimensions to 80% the original to fit the MK3/S bed and reduced the thickness to 40% to reduce print time. Print instructions Prints in 3 colors via filament change: white, orange,…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Layer changes are sorted in the pre-sliced file. The colour order is White, Orange (or Yellow), Blue and Red.
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
Intro: Finally you can hang your dirty shoes from the wall in a nice way! With this model i tried to hang the shoes on the wall without clamping or indenting the front part of the shoe or waste to much space on the wall. So the hook…
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
A rattleback that will happily spin one way but not the other. It will spin clockwise with no problem but will resist and even change direction if spun counterclockwise. The function is based on the internal weight distribution of the…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
Ich war so zufrieden mit meinem Design für Tütensuppen ( https://www.printables.com/de/model/762184-tutenhalter-container-for-soups ), dass ich gleich noch eine Box für mein Backpulver, Vanillin Zucker, Backhefe etc. gemacht habe.…
Wydruk około 2,40 €–2,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this tool to help with opening and closing the case back on my watch. It's confirmed to work with a Seiko SBDC051. This might work with other models that have a 30mm distance between the case back slots. One of the photos shows…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
This innovative bottle holder design serves a dual purpose: it allows you to cool PET drink bottles in lakes and rivers and easily attach them to backpacks. This makes it perfect for outdoor activities like fishing, hiking, and camping.…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sizable hide for snake. We have a corn snake that is about to hit 6 feet that comfortably fits inside this hide.
Wydruk około 6,26 €–7,65 € nettoWstępna wycena jednego wariantu
I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: Improved volume and fit, as well as a version for the left hand. (Example printed in white PLA+ from eSUN). Background: Created for my partner who has quite big palms - he said when playing for longer it is straining to hold the…
Wydruk około 2,44 €–2,99 € nettoWstępna wycena jednego wariantu
I copied this here for archiving and to provide others with an easier print. I've adjusted the orientation and provided one that is reduced in size to accommodate 100g canisters. I printed mine in PETG using supports and 4 perimeters for…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I added the fusion file, so you can remix it. The screw is a tight fit so I resized the reel to a 102% for the print file, which worked for me, otherwise feel free to adjust it to tolerace of your chosen material and printer. This size…
Wydruk około 13,29 €–16,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapt any cylinder to any strap on your backpack with this parametric design. Suggestions welcome! If you want me to include a custom size in the files, just let me know in the comments and I'll add it. What items do you want to attach to…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Miniature accessory | Miniature | Diorama | Miniature Scene Customize the dimensions for your miniatures. I look forward to seeing your work with them. Have a happy printing time 💛
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Ich habe das Originale Dwarf Cover Back etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser. Ich habe durch den leichten Gewichtsverlust keine negativen Veränderungen am…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
This mount allow the mount of the Skadis panel on the back of a Bror System. It works with M3 inserts. I have seen others systems but I was after a design that is mostly hidden behind the panel. It prints well without supports at .2 mm…
Wydruk około 2,83 €–3,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original model fits on a Skoda Enyaq, but it blocks a bit sight at the bottom. Furthermore, i have added a small opening to drain water.
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro: These are some simple hook for your wardrobe. They are mounted from the back with M3 inserts and screws. For customization every hanger can be “redesigned” in Prusa Slicer by removing the top and bottom solid layers and change the…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
This is a custom universal body/back scratcher designed for "Prusa Flash Contest". Infino Scratch is a multi purpose back and body scratcher (with easy click and release). innovative click and release design for easy extendability to any…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Instead of having the T2 camera sit on top of the TV this stand helps to position the camera in a good position in front
Wydruk około 2,91 €–3,56 € nettoWstępna wycena jednego wariantu
I printed it with 80% of speed. Its really strong :)
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
A rear lens cover for Canon Lenses. If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal. No support…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you fear your or your kid's backpack to be misplaced with the backpacks of others? Fear no more because now u can attach a backpack name tag with your name to your backpack! Printing recommendations Filament: PLA / PETG Supports: Not…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Backplate to install a Philips Hue Tap dial switch on top of an existing (NL) light switch in such a way that the original switch mechanism remains accessible (albeit without its plastic coverings). Similar (commercially available)…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This works now with an iPad Pro 10.5" (might also work with an iPad Air 2nd gen). It is a tight fit (especially if you try to slide it on on the camera side) but it shouldn't lose in the car. I recreated it as an one part print (you need…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These brackets work perfectly for my DIY version of the VFLAT World photography brackdrop/background system. I made mine out of wallpaper, posterboard, and foam board from the Dollar Tree. Works great! Print 2 for a complete system.…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Schonbacken für meinen Heuer Schraubstock mit 120mm Backen. Dieses Modell kommt ohne Magnete aus, da es von der Seite aufgeschoben wird und mit dem oberen und unteren Steg absolut fest sitzt. Ideal zum Klemmen lackierter Teile. Die Backen…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…
Wydruk około 35,01 €–42,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really liked the original version, and attempted to print it with some success but getting it off the build plate and mounted on something else with the tiny separate pieces proved to be a challenge. I added a rectangle under the…
Wydruk około 5,74 €–7,02 € nettoWstępna wycena jednego wariantu
I received an old AM3+ motherboard and processor with its backplate and retention brackets missing. The latter I could find here. Sadly I found no suitable backplate so I whipped out Fusion and made one. I recommend you to print with…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Male part of a Deuter Backpacks belt / strap buckle. Fits 3cm wide straps, e.g. the waist strap on a Futura 22 backpack. The pictures show how the strap should be routed through the printed part. Prints in 41 minutes at 0.15mm layer…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
I needed a pair of vise protective jaws to clamp sensitive materials securely without scratching or denting them. The notches make it possible to clamp round or oval workpieces and prevent them from slipping off in any direction. Due to…
Wydruk około 6,29 €–7,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The PSP Go uses the same battery connector as the Vita 1000. I found a few extended backs, but they all required taping the battery in place. On top of that, there was no way to access the M2-to-SD adapter from the outside. I used…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
A small shelf that I use to put one of my PC speakers on. It could be used for anything else. It can be mounted to the wall using some 4mm screws. The dimension in the filename refers to the diameter (measured from the side) of the round…
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
Find 3D-Printed RC cars here.
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Proven on the trail, this is a convenient and lightweight solution for hydration in the outdoors. Great for work or school, too. Attaches with a standard zip tie that tucks into a recess to hold it in place and out of the way. Hook it to…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These prints help tidy up Victron VE.Direct / MK3 - USB cables on a wall/backboard. With them, the Victron cables can be mounted directly to the wall/backboard or on a matching pedestal. The pedestals raise the cases above the…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
This is a replacement for PopSocket back plates. I came up with the design because those little pins which usually hold the plate in place broke of. Print instructions: You have to use supports to print this. I recommend printing it with…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Simple and stylized model to hold a mask. Printing instructions Printed in PLA, you can print it in PETG OR ABS too I recommend printing at 0.2mm and the infill will depend on how strongly the item will be held or treated, but 20% infill…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
The misses was always leaving her bags around the place and on the floor so this hanger has significantly helped clean up and organize everything. Have even used it for a heavy winter coat too. I've has the best success printing it on its…
Wydruk około 7,28 €–8,90 € nettoWstępna wycena jednego wariantu
I lost my cupholder divider for my car, so I decided to design my own. It should slide right in and fit snuggly. Recommended Slicer Settings: No supports 0.2mm layer height 5% infill
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
This is a way to hold the SnapTop Cases in a small clip that can hold 4 magnets, or use Velcro or Tape. There is a pocket inside the wall that holds 4 1/2" x 1/16" D81 Magnet (K&J Magnets). There is a small frame for the magnets that can…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
About I couldn't find a hook like this so I designed one myself! I've been using this to hold my backpack for about a week, it's been working great so far. Dimensions Total height: 71mm Hook width for backpack: 7mm Hook width for closet:…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
CAUTION: It is PLA and should be kept out of the sun! Suggest ABS or ASA instead. Only use this for 12oz cups as taller ones could tip over in a turn. The 2024 Subaru Outback is a fantastic vehicle. IMHO one of the best made. That said,…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Softjaws (lenght 100mm) for a vise. So that your parts are not damaged when clamped in the vice. With three holes on the back to press in or glue in magnets Ø3x2.
Wydruk około 2,12 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a heart for those who love Dance and want to show it off by having it hang on a necklace, backpack or dance bag. Options are endless!!! Red made on my Bambu X1C and the green on my Mini Prusa
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Horizontal and vertical 20mm backpack mounts for Armytek Wizard and Wizard Max. Material: PETG Resolution: 0.2 Perimeters: 4 Supports: yes
Wydruk około 1,01 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the original Gravity Broom Holder that allows for grabbing onto rods with diameters as narrow as 9mm and as wide as 18mm (Use a thicker rubber band for the lower limits of its size to avoid slipping). I made this…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Bestie heart can be used for necklace/backpack/keychain. Fun little gift to make for your kids class. Enjoy!
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Eine Halterung für die OptiGrill Backschale, um diese platzsparend unter Regalböden zu montieren. Schraubenempfehlung: 4,5x35 A holder for the OptiGrill baking tray so that it can be mounted under shelves to save space. Screw…
Wydruk około 4,88 €–5,96 € nettoWstępna wycena jednego wariantu
The back-plate for my Neptune 3 Max arrived bent, and I couldn't get it quite bent back right. I reverse engineered it, adding considerations for a plastic construction, and now it works great and is strong. I printed in PETG. I don't…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This chair is smidge lighter than the lightest chair on the market. It is proven with a 160 lb user. Beyond that, please test carefully, use at your own risk. The quality of the printing makes a difference in the strength of the chair…
Wydruk około 5,88 €–7,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the Honeycomb Challenge Coin Holder by TruTech . I added a background layer to help when your wall isn't a single color. Color change layer at 1.60.
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
I've designed again the angled outlet cover, because the original one that lets cables go out straight, doesn't allow you to put the printer into a PRUSABOX made of IKEA components. The gcode attached in this project is for printing on…
Wydruk około 0,72 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable clips that fit to the back of the Prusa MK4/MK4S without hindering movement of the heatbed. Can hold 4 cables of ~7mm diameter (or more if they're thinner).
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V1 ist in Anlehnung an die originale Backe mit zusäzlicher Zentrierung für z.B. runde Bauteile V2 ist besser für den 3D-Druck geeignet; die Rundungen wurden durch 45° Fasen ersetzt. (more print friendly)
Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu
This was created so I could have my photography backdrops rolled up and I could quickly change them out. It is created to be used with 1.25" PVC conduit and an 8" long 3/8" bolt and 3/8" nut. I provide the scad files so one should be able…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
MMU3 Buffer holder, which can be in the Original Prusa Enclosure behind the printer. Ideal solution, if you don't want to have it outside, but still “easy” access to it. It is situated in the right back corner. The depth of it is 67mm,…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
F1 2024 Ferrari SF-24 Back Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
Clip mount v2 Having the original model in place these last couple of months, I liked the simplicity, but truth be told I missed having the vent accessible. So here is an updated version that straddles the emergency lights button and…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Base Backplate Vanilla This is the the dove tail backplate, Youll use it to cad Your own tool holders and organizers for the Peg board/Wall mount MODULA system. Included are 1x single backplate and 2x 3x 4x for larger tool holders. There…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
I made a wall hook for a backpack. I tried to make hook big enough, to support heavy load and to be printable without supports. Four holes for screws are “just to be sure”, when you have really heavy backpack. I didn't try maximum weight,…
Wydruk około 5,52 €–6,74 € nettoWstępna wycena jednego wariantu
This is a remix of jimerb's legendary 4-function back scratcher. Please go to their page and like the model! This is a simple union of the base and handle into one long part. The length is scaled to 88% of original. It's 330mm long to fit…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
Silhouette of the Hyundai i30 Fastback, it can be used as a keychain.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
The scratcher on this model tilts in all directions to keep the surface in contact during use. Design Features: Print-in-place (no assembly required for the head). No supports required. The handle is a 3/8” wooden dowel (nominal dowel…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
" timqui " created a nice clip for the heat bed cable here: “Back (Extruder) Cable Clip (Ender 3) ” https://www.printables.com/model/46125-back-extruder-cable-clip-ender-3 But my cable kept wanting to come out of the clip, so I made this…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The ultimate protective cap for the Fein Multimaster sanding pads. Easy to put on and effectively protects the Velcro fastener of the sanding pads during storage. There is one model for the thick sanding pads and one for the thin ones.…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu
Back Gauge Add-On The back gauge helps bending same lengths several times without the need of marking your sheets before. Just set the leg length, tighten the bolts and bend as usual. Just one sheet after another without interferring. You…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I decided to make back legs for the IKEA HEMNES shoe cabinet. I recently moved and had to modify the cabinet so wall support is not necessary any more. This is my first model so it is very simple. I added some small extra side support…
Wydruk około 9,11 €–11,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I didn't find the back part of the Nazgul Evoque properly 3D modeled on the internet for additional GPS module, so I designed an almost exact replica of the part where the XT60 and the video antenna are and extended it for the HGLRC M100…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Circular Towel Holder with a flat backside for better adhesion.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the support peg for the trunk cover on a Subaru Legacy Outback 2011 (4th gen). This is for the spring loaded side (right side). The shape is the same on the opposite side except the shaft would be different (larger diameter, no…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix from this model https://www.printables.com/model/227299-backpack-strap-clip to keep the TUMI backpack straps from flapping around. No support needed raft recommended. Ender 3 V2 Material:PLA 1.75mm Nozle: 200C Bed: 50C
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
3 cm, 10 cm, 24cm, 4cm keychain
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Description: Backgammon pieces for gameplay Pairing die for betting Printing Instructions Print 2 sets of 15 pieces (they should be different colors [or you can mark half of them]) Print 1 pairing die (Board & other 2 dice not included :))
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Install your IKEA NAMMARO backrest without drilling and screwing, so it's super easy to change the configuration of your outdoor modular sofa. https://www.ikea.com/ca/en/p/naemmaroe-chair-outdoor-light-brown-stained-s39529156/
Wydruk około 8,78 €–10,73 € nettoWstępna wycena jednego wariantu
A tool holder for the Torvol FPV backpack. I downloaded the tool holder from Collinhasasthma ( Designs - Thingiverse ) and printed it out, but it wasn't the best for me so I redesigned the tool holder from scratch. The tool holder has now…
Wydruk około 18,35 €–22,42 € nettoWstępna wycena jednego wariantu
For every backpack without a chest strap here comes my solution. This model can be clipped to the straps of a backpack to attach additional chest straps. Also you can attach tools and further useful devices to the holders. The mound is…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3 cm, 10 cm, 20cm, 4cm keychain
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
![Customizable Shoe Wall Storage Hangers [mounted-from-the-back-edition]](https://media.printables.com/media/prints/75562/images/816504_8d42e69a-97d7-4d04-8292-9b159296b6c4/20210908_170631.jpg)
![Customizable clothes hook [mounted-from-the-back-edition]](https://media.printables.com/media/prints/75587/images/817825_0ace74fd-9fe2-4019-b475-0ed9380de7a7/20210908_170722.jpg)
