209 modeli
This is a simple vacuum hose adapter to make it possible to connect an approximately 30mm (tapered) vacuum hose fitting to a 2-½" O.D. diameter opening - this is the opening on the Bauer sander as shown in the photos (and probably sold…
This case is used to store Bauer Hockey Skates runners. It can also be used for other models of runners like CCM, although True's runners won't fit. Checkout my other models for the TRUE model.
This is just a small modification of the tool hanger made by @Eightbit. All I did was expand it to about 70mm in width. It fits the oscillating tool made by Bauer but likely fits other tools that have a wider handle. No supports required.…
Mount 2 Harbor Freight Bauer 20v batteries to the wall
v3.1 update, 11-April-2024: Finally got to borrow a Bauer 20V battery to take measurements from, and have revamped the design for best fit. Earlier iterations were functional, but this now fits all the Bauer tools I have to test with just…
This is a simple remix of an existing bauer battery holder, which I've used for storing batteries on the undersides of shelves, but for wall mounting, vertical clearance became an issue when removing the batteries. Angling the batteries…
This is a power tap for using a Bauer 20V battery to power other devices. Printing and assembly instructions included in the files. Always exercise caution when working with wiring and lithium batteries. They will discharge very fast if…
These bins increase the amount of storage compartments in the Harbor Freight Bauer Modular Storage System. The storage box only comes with 12 rather large bins, and putting a small quantity of small hardware seemed like a waste. These…
Witajcie! Przedstawiam uchwyt na baterie 18V firmy Erbauer oraz Skil! Pozdrawiam!
You will need some longer 3mm x 20mm length screws to make this work. The original screws are Torx T10 security heads. Luckily Harbor Freight sells a set of security bits needed to remove them.
Simple replacement base for the 1.7A Bauer battery charger that comes with the drill/charger/battery combo. Adds the ability to wall mount. I matched the contours enough to have it snap together. I didn't bother transferring the vent…
I wanted to mount by Bauer Battery Chargers to a French Cleat in my shop. There is another mount available but you need to get specific screws. I had difficulty finding them so I designed a simple box/case/mount. It uses more filament…
STEP file included, licensed as public domain, do what you like, I don't care. You will need: 2-m4x20 2-m4 nuts to clamp the tool side on
Printing/Building Print with 0.1mm layer height, insert color changes at 1mm and 1.5mm (Black layer is 1mm thick, white and red 0.5mm each) Had to make the joints quite small to fit in the DIN A6 Postcard format so a bit of superglue…
support for all erbauer 18v cordless tools. 2 versions the big and the small, print the big one if you keep the belt clip [see photo]
Bauer Tool Mount designed in Tinker CAD. No supports/rafts needed.
Battery holders for the 20V Bauer batteries sold at Harbor Freight. I only have the 1.5 and 3Ah batteries, so could only make models for them, and not the 5Ah one. Holder has 2x#8 countersunk holes for mounting. I have only tested the…
My sons Sliding Buckle for his Bauer Hockey Helmet broke and I didn't want to pay $1.99 + $7.99 shipping to replace it. In order for this to work properly you need to feed the band back through the first opening of the buckle to get a…
Bauer 20V Tool Mount – Wall Organizer Bracket Keep your Bauer 20V power tools secure and organized with this heavy-duty wall mount. Designed specifically to fit the Bauer 20V battery interface, this bracket holds your tools securely with…
STEP file included, licensed as public domain, do what you like, I don't care.
Witajcie! Przedstawiam uchwyt na elektronarzędzia 18V marki Erbauer oraz Skil. Pozdrawiam!
UPDATE: 12/27/25 As i aquire more bauer tools i am continuing to tweak the model so that the adapter fits every tools universally. i dont own any bauer batteries so i tweak it as i go. i just updated the latest version of the model. so if…
Replace the “BAUER” logo on your Harbor Freight modular rolling tool boxes with a blast from the past! Based off of the tool brand from the show “Home Improvement”, these Binford logos will class up your rolling toolbox! I've also…
Erbauer battery holder fast print lite version.
Keep your cordless tools organized, secure, and ready for action with this ultra-slim, one-sided tool holder designed to fit Milwaukee M18 and DeWalt V20 power tools, as well as Bauer and Hercules (Harbor Freight) cordless tools that use…
Spare strap clip for Bauer RE-AKT ice hockey helmet. Printed with PETG. Needs a bit of support for printing
The coupler allows you to remove the dust box and attach a 1-7/8" shop vacuum hose. I use this one and I love it! You may have to sand down the inside of smaller part of the coupler to get an easier fit. Here's a link to the exact sander…
I wanted a tool hanger that hung Bauer 20v tools upside down and couldn't find on. So I created this. This works great for the storage/transport box that I wanted to put them in. No supports needed. I printed in Petg and its plenty strong.
I recently purchased some tools from Harbor Freight that use a Bauer lithium battery. There are no covers for the contacts of the spare batteries so I design one. You don't want one of these shorting out and starting a fire. The first…
Any one who enjoyed the series 24 will love this mask, Cheers Jace
Blue crimp spade connectors fit snugly when not crimped. Suggest soldering wires to the connectors to maintain fit. This was a remix of another model but I'm unable to locate the original post. The original was slightly modified to create…
STEP file included, licensed as public domain, do what you like, I don't care.
STEP file included, licensed as public domain, do what you like, I don't care.
Made with PLA+, OC used PETg so both should work no supports You want max adhesion so rafts or your slicer equivalent will help. Infill shouldn't make much difference, I used 20% This is a tall model- almost 240mm so make sure your…
This is an attachment for the Bauer 20v Blower that is less than half the length of the original. It's 10cm long with an 18mm exhaust diameter. I printed in PETG but I'm sure anything would work. It fit snuggly for me off my Prusa MK4. I…
Simply print all 4 sections and slide them together inside the unit. You can glue them together if you'd like but the dovetail and engagement on the interior features of the box does a pretty good job. The space inside the box is 15u tall…
BOM: 1S-8S battery indicator 1 “60W” lamp 1 SPST 15x10mm switch 2 6.3 mm wide, long spade connector, I've used angled PCB spade connectors. 2 6x12 mm screws optional if low battery voltage cutoff is needed, I used TL431 low voltage…
Easy install. Replace filter with adapter and connect hose. Print with Fuzzy skin for better Grip.
Mounts for Erbauer holder tools. Loose fit, easy to mount and unmount.
Simple flange to reinforce the bottom of the Bauer dust separator sold by Harbor Freight
Originally for my 3D printer backpack, this adapter can be useful for anyone that will be using it to power other devices (Power Wheels, Motors, USB devices with buck converters). !!!LITHIUM BATTERIES WILL CAUSE A FIRE IF MISHANDLED OR…
Logos for Harbor Freight brands: Icon Hercules Bauer Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you're looking for a particular logo, let me know and I'll try and get it for you.
The Bauer 20v Blower is a great product, but the keyhole cutout for storing it on a screw or nails is not ideal. I found the Printables model by BenK that fits the blower perfect but the wall mount does not work for attaching it to the…
I am very pressed for space living in a small apartment with no garage. All my tools are kept in my small spare room closet. Any jigs, sawhorses, etc, must be able to fold/break down for storage. When I needed to cut some threaded rod, I…
Wall Mount for Bauer 20v charger. Can be attached to charger with screws or foam mounting tape.
24 - Jack Bauer (Kiefer Sutherland) - 2001 3D printable model.
I took measurements from a Bauer Li-Ion battery and I use this to hold my battery powered vacuum on the wall and out of the way. Someone more ambitious may use this as a start to a battery adapter - I have done the “Bauer" side of things…
Holds Harbor Freight Bauer Batteries.
I wanted a under shelf mount for my Cordless Screwdriver (harbor freight 64313 https://www.harborfreight.com/4v-lithium-ion-14-in-cordless-screwdriver-kit-64313.html ) So I took a profile pic of the screwdriver on graph paper, traced it…
Replacement base for Baurer 20v router
fits with bauer NME4 SR. For best print use: PC or PETG with 80% fill, automatic supports
This is a replacement plate for the bottom of the router. Can also be a starting point for other mods like a track sled for the router. I recommend printing in PETG for rigidity.
Designed for: Bauer “Micro-Cleaning Accessory Kit for Wet/Dry Vacuums, 9-Piece” by Harbor Freight. https://www.harborfreight.com/micro-cleaning-accessory-kit-for-wetdry-vacuums-9-piece-59695.html Smaller pieces are a 17mm diameter hole.…
Remix of Harbor Freight Bauer Modular Organizer Storage Bins by @Lunchie_B_1131947 to further subdivide bins into 4
Ridgid NXT 2.5" (nominal) vacuum hose to Bauer/Harbor Freight corded Random Orbital Sander dust port adapter. Print Settings Rafts: No Supports: No **Resolution:** .2mm Infill: 15% gyroid **Filament:** Geeetech TPU 95A Black Notes:…
This is a storage attachment for the Honeycomb Storage Wall to fit a Bauer cordless rotary tool from Harbor Freight ( this one specifically). I'm also including a print file for an attachment to hold the storage box it came with for the…
I needed a way to store my mini blower in my RV to keep it safe and off the compartment floor, so I designed this very robust wall mounted holder to mount it, along with two extra nozzle storage pods. It needs to be rotated in the slicer…
This is intended to be used while the saw is mounted to a table in the vertical position. Check out the video. Printed upside-down with support. Use a brim on the shaft. The hinge takes an 8-32 machine screw. It was designed to use a…
A bit holder for Bauer cordless tools. This holder fits the right side of the tool, print this in a mirror image to fit the left side. Install using an M4x10 cap screw.
I purchased two Hockey CCM Helmets in a end-off-life offer, but actually, the Full Face Visors I have are from Bauer. The holes for the clips in the CCM helmet are 11mm wider than in Bauer helmet and I designed this clip variant to avoid…
All credit to Schlossbauer for the original model - follow the links to his orignal model and support him on patreon if you can. I'm uploading this remix as I found myself spending a significant amount of time reworking the model both to…
This is an attempt to create a parametric (customizable) OpenSCAD nozzle for the Ryobi high-volume low-pressure inflator that can be adjusted to work with a particular inflatable. The tip that comes with Ryobi is about 7mm, while most of…
Mount for a Bauer drill that uses a nametag magnet and fits with friction alone. This can be used to hold metal objects hands free while using the drill. This works with most Bauer 20v battery powered tools. This is the nametag magnets…
I used this to have a specific place for my level when I go to the field. I used four screws from my random hardware bin. Due to where I wanted the holder, I trimmed a small part of the ribbing on the side of the carrier although these…
A few US owners have hacked their RWD Kia EV6 and Hyundai Ioniq 5 frunks by replacing the small OEM compartment with a roomier Harbor Freight Bauer Modular Toolbox. The Bauer nameplate on this toolbox can be popped out with a screwdriver,…
Adapter to connect a Bauer Wet/Dry Vacuum to a Bauer Corner/Detail Sander
Included freecad file so it can be modified and used as needed.
Wall Mount for Erbauer ECS18-Li Circular Saw This is a simple but sturdy wall mount designed specifically for the Erbauer ECS18-Li 18V Circular Saw . It holds the saw securely while keeping it easily accessible in your workshop. ✅…
I designed these battery holders for Harbor Freight's Bauer line of tools, with the idea that the batteries lock into place, thereby allowing you to mount them upright and slide the battery in from below. This way you can see the power…
I needed a long divider for my Bauer Small Moduler Toolbox . Here it is. I made a smaller one as well. The Bauer parts pinch a little at the bottom, so the fit is quite snug
Cover for Erbauer ERB690CSW Plunge Saw
Yet another Bauer battery mount. I have a cart with 2X4 supports so my main criteria were 1) had to fit on a 2X4 and 2) one print for all size batteries. I didn't see what I wanted so I rolled my own. If anyone wants the fusion360 source…
This attachment will allow you to attach and twist lock. It will accept a 1.5"(inner diameter) 1.75 diameter hose.
This Bauer 6 Gallon, 4 Peak HP Wet/Dry Vacuum adapter will allow you to connect your vacuum to a 2.25in inside diameter tool like the Bauer 4 in. x 36 in. Belt and 6 in. Disc Sander. It works printed in PLA vertically with no supports.…
Have a Bauer Bench Grinder lying around? And think about getting a stronger one later on? Or have one just for a siren project? Well do that and use the Bauer one to use as a siren! Bauer Bench Grinder Used:…
My coworker found a nice set of luggage and got it cheap due to a broken handle. Before he went hunting for a replacement he asked me if I could model and print a replacement. We have yet to test the part fully assembled part but the…
This is a replacement "tray" for the Bauer Modular Storage System Medium sized box. It has a Gridfinity Refined baseplate with the 15mm thumbscrew to hold down the bins. (No magnet holes). It completely replaces the red bins. There is a…
Rosenbauer keychain Rosenbauer keychain withour background
a 20v bauer tool mount with precision for holding tools extra securely you can mount it basically anywhere in any orientation though on a wall prongs down is not recommended but will hold most tools for best results: account for the…
Adapter to allow the use of Shark or other vacuum attachments with a 35mm inner diameter (~1-3/8") on a vacuum with a hose of 32mm (~1-1/4") outer diameter. Does not work the other way around. The hole is straight all the way through with…
Adapter converts the smaller hose on a Wen Drywall sander to the larger inlet on a HF Dust Collector.
I needed a 45 deg. vacuum/dust extractor 1-1/4 in adapter for my Bauer belt sander to replace the stock bag (does nothing but throw dust in the air). Everything fits snug and works perfectly. The port to the belt sander is ~30.75 mm…
🇬🇧 Description (English) Keep your workshop tidy and efficient with this battery holder designed for Erbauer 18V batteries , perfectly suited for HSW (Hole Storage Wall) panels. The snug fit keeps the battery securely in place while…
This adapter plate for the Bauer portable bandsaw from Harbor Freight makes cutting 45 degree angles easier as it gives more support to the piece being cut. I printed in orange to make it easier to find in my shed :) Enjoy! Print…
This is a replacement bin for designed to be compatible with the BAUER Storage System Modular Organizer Item #58513 available at Harbor Freight, it will also fit similar items from Tactix(who makes the bins harbor freight rebrands) and…
Crude terminal block for Bauer tools. Use spade connectors to to mate with the tool terminals. Glue the connectors to this part once they are mounted to the tool's terminals. You need a 10k resistor from negative to the temperature sense…
Helmhalter für Feuerwehrhelm. So kann der Helm im Fahrzeug sauber verstaut werden. Gedruckt in PETG mit 45 Grad Neigung für bessere Stabilität. Der Helm liegt auf dem Nackenpolster des Rosenbauer Heros auf. Passt eventuell auch noch bei…
Print it, use it and have fun! If you like the model, please consider leaving a like, downloading it or giving it a recommendation! Creative-Prints
Designed to fit Bauer 20V 1.5 or 3Ah battery attached to Bauer 20V Cordless 150/300 Lumen Compact Flashlight. Works well to light up my closet. Mount/holder has two #8 countersunk holes for mounting. Model should be printed upright, with…
This is a base plate for the Bauer 19121E-B router that allows you to router at a 45-degree angle.
🇬🇧 Description (English) 3D-printed hook designed to securely hold an Erbauer drill on a Honeycomb Storage Wall (HSW). This mount keeps your tool neatly stored, visible, and ready to grab. It’s easy to print and requires no supports. 🔧…
A bottom half of the Bauer Harbor Freight brand charger. The stock one does not come with an option to hang on a wall, this one has cutouts for screws to hang it. 5/1/2022 - edited and added an update with further recessed screw holes on…
A custom tool box label for Bauer Tool boxes from Harbor Freight. The label snaps into place.
Wall mounted hanger for storing Bauer 20v handheld vacuum accessories.
If you appreciate my work, I would be happy about feedback and support! :) Wenn Sie meine Arbeit wertschätzen, freue ich mich über Feedback und Support! :)
This Bauer 6 Gallon, 4 Peak HP Wet/Dry Vacuum adapter will allow you to connect your vacuum to a 1.25in outside diameter tool like a chop saw.
As you can see I made the base a 5" round instead of a square. The Warrior dovetail jig requires a minimum 4" (actually probably 4.25") round base in order to set up the fence. This is a little bigger than that. Anyway I can't tell if…
The male fastening of a hockey goalie helmet broke. The helmet is Bauer brand and the metal clips were damaged. I replaced them with these printed in PETG. La sujeción macho de un casco de portero de hockey se rompió. El casco es marca…
