Wyniki wyszukiwania: blink

Sortowanie

549 modeli

P
PrintablesSimple3D

Blink (4th Gen) Outdoor Security Camera Rubberized Magnetic Mount for Vans

I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…

Wydruk około 4,09 €–5,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
373
Polubienia
30
Ocena
5
P
PrintablesKendall Unruh

Blink Mini Camera Mount for Ender 3 Max Neo

I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…

Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu

Pobrania
298
Polubienia
58
Ocena
5
P
PrintablesAsa

Blink Camera Slip Mount

I use these with blink mini (version 1) cameras. I have not tested them with the blink outdoor or blink mini version 2. Print with a brim and/or some glue stick to prevent the model lifting off the print sheet. Attach with screws or…

Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu

Pobrania
197
Polubienia
29
Ocena
5
P
Printablesmscalora

Blink Mini Camera Mount Arm

I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.

Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu

Pobrania
67
Polubienia
12
Ocena
5
P
PrintablesS.E

Blinkerhalterung USD-Gabel Monkey

Blinkerhalter für Honda Monkey,Skyteam,etc mit einer 44mm USD-Gabel. Benötigt wird zusätzlich: M3 Gewindeeinsätze M3x16 DIN EN ISO 4762

Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
37
Polubienia
2
Ocena
0
P

Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesdjedje_zr7

Blinking eyes owl wall key holder

I made this blinking eyes owl Wall Keychain for my mom who love owl. I took the idea from Amaz.. The first assembly is a bit tricky.

Pobrania
6278
Polubienia
847
Ocena
4,61
P
PrintablesKijai

Blink Fox

A quick sculpt inspired by the wonderful art of the Hearthstone card "Blink Fox" by Eva Widermann. This model does not require any supports, pretty easy print. Video of the sculpt and print, back then I was using 3D-Coat for sculpting:

Pobrania
2799
Polubienia
436
Ocena
4,92
P
Printablesdamon darnell

Blink Mini Camera Mount (Ender 3 / Ender 3 Pro / Ender 3 Max)

Remix using files from. https://www.thingiverse.com/thing:3147743 https://www.thingiverse.com/thing:4588354 https://www.thingiverse.com/thing:4141144 I made the Base in Tinkercad to Hold a Blink Mini Camera…

Pobrania
1499
Polubienia
321
Ocena
4,79
P
PrintablesNas

Blink Outdoor 3rd gen camera Hood - Visera cámara Blink Outdoor 3ª generación

I needed to protect the lens of my Blink Outdoor cameras from heavy rain (the water drops in the lens turn the image very blurry). So I decided to do a remix of the wonderful Blink camera Hood created by Neil Baker…

Pobrania
1489
Polubienia
185
Ocena
4,85
P
PrintablesMarvin

Blink Doorbell corner/angled mount wedge

This mount allows you to install your Blink Doorbell at a 25 degree angle in a corner. There are 3 different sets of screw holes incase you need to offset the mouting if using existing holes. e.g for wiring.

Pobrania
1003
Polubienia
78
Ocena
5
P
PrintablesPieSupplies

Blink Fox Dice Tower

Blink Fox Dice Tower I took the beautiful “Blink Fox” by Kijai and added a hollowed tower so it could be used as a dice tower.

Pobrania
982
Polubienia
184
Ocena
5
P
Printablesmetaf0ur

Blink Doorbell Sync Module 2 Mount

I had been just double adhesive taping this thing and realized that since I had an actual working 3D printer I should probably design a mount. I made sure that it can accommodate fairly large USB flash drives and added another 2mm to the…

Pobrania
977
Polubienia
91
Ocena
5
P
PrintablesJim

Blink Mini Camera - Mount for Ender 3 V3 SE

Use an inexpensive Blink Mini Cam to monitor printing over WiFi. Clips easily to the Z-Rail on the Ender 3 V3 SE.

Pobrania
952
Polubienia
127
Ocena
4,88
P
Printableskaje

Blinky Three-Eyed Fish (2 variations)

Update March 15, 2022 : Added simplified STL files. Blinky is the next step in evolution. Originally showing up in The Simpsons , we know his species lasts at least 1,000 years into the future as he also shows up in Futurama . Assembly…

Pobrania
847
Polubienia
161
Ocena
5
P
PrintablesCheckThisOut

45° Mounting Adapter for Blink Outdoor Camera

I needed to angle the camera 45° more than the stock base allows. Designed to use the hardware included with the camera.

Pobrania
785
Polubienia
94
Ocena
4,5
P
Printablesalpo16000

Blink Cam Bird Feeder

A Bird Feeder with integrated Blink outdoor camera

Pobrania
656
Polubienia
117
Ocena
5
P
PrintablesGuns & Bourbon

Blink Sync Module 2 Mounting Bracket

I needed a mount to get my Blink Sync Module 2 (cumbersome name) off my desk without mounting it to the wall. Everything I found was at an odd orientation and/or did not have a cutout for the USB memory module I added. I used this short,…

Pobrania
612
Polubienia
68
Ocena
4,83
P
Printablesfilippo

Blink indoor camera stand

A simple stand for blink cameras. Works with volcano mount included with the camera and M3 heat set inserts. Raises the camera to place it in a flat surface and better point it where desired. Platform is big enough to make it stable and…

Pobrania
588
Polubienia
81
Ocena
4,8
P
PrintablesMakerDan

Blink Outdoor Camera and Wall Mount

This is a 45 degree mount for a Blink Outdoor camera. It comes in 2 parts. The main body gets screwed to the wall through the front and then the outer cover is placed overtop and is screwed in place by 4 - #4 screws. It helps prevent…

Pobrania
558
Polubienia
64
Ocena
5
P
PrintablesNikki81

blink camera 90 degree mount

a simple blink camera 90 degree mount using the original screws 2 m3x12mm bolts and 2 m3 lock nuts are required to secure the original mount. It is easier to fix the 90 degree bracket to the wall first and then the original mount with the…

Pobrania
542
Polubienia
73
Ocena
5
P
PrintablesLayerLux3D

UFO Abduction Lamp with blinking lights

you need: glas cylinder with both ends open about 80mm in width 27x blue LEDs 3x white LEDs 30x 200 ohm resistors 4x 2k ohm resistors 4x 2N2222 transistor ARDUINO nano 5M ohm potentiometer 7V power supply green fabric Use transparent…

Pobrania
520
Polubienia
180
Ocena
5
P
PrintablesLoboCNC

Blinking Cat Glasses

Just in time for Halloween, fashionable eye-wear to go with that feline/reptile/alien costume. Or if you are lazy, just these and a pair of chinos. Just rotate the outer ring on either side to open and close both irises. Prints with no…

Pobrania
506
Polubienia
353
Ocena
5
P
PrintablesBUDS3D

BLINK MINI CAMERA WINDOW MOUNT

AMAZON BLINK MINI CAMERA WINDOW MOUNT ALLOWS YOU TO USE YOUR BLINK MINI INDOOR CAMERA TO MONITOR THE OUTSIDE THRU YOUR WINDOWS PREVENTS REFLECTION FROM THE GLASS AND GIVE CRYSTAL CLEAR VIEWS PRINTED ON A PRUSA MK3S+ STANDARD .20 SETTINGS…

Pobrania
456
Polubienia
58
Ocena
5
P
PrintablesSteve

Blink Mini Pan Tilt Camera Wall Mount

Wall mount for the Blink Mini Pan-Tilt Camera. This can be mounted to the wall with either Command Strips or screws. Cutouts on the sides and bottom allow for the power cord to be routed in any direction. I added a hole underneath the…

Pobrania
440
Polubienia
59
Ocena
5
P
PrintablesLoboCNC

Blinking Iris Goggles

Watch: These blinking goggles use a remix of my Print-In-Place Iris Box ( http://www.thingiverse.com/thing:1817180 ) which is a remix of emmett's Preassembled Iris Box ( http://www.thingiverse.com/thing:1811143 ). Right and left…

Pobrania
405
Polubienia
182
Ocena
5
P
PrintablesVihor

Blink Outdoor camera downpipe bracket

The design makes use of the existing Blink camera bracket and the supplied screws. There is a curved cavity so a large cable tie can be passed through it and around a UK standard downpipe. Downpipe external diameter: 69 mm Cable tie…

Pobrania
402
Polubienia
55
Ocena
4,33
P
PrintablesGuido666

Stand for Blink Outdoor Camera

A small stand for (Amazon) Blink Outdoor cameras (BCM00400U). Compact design. Notch on front of riser allows camera to be angled downward. Uses OEM mount and screws, and provides stable feet. Feet are not visible to camera, in any…

Pobrania
389
Polubienia
63
Ocena
4,6
P
PrintablesRaym00n

FlashForge Adventurer 5m (AD5M) - Blink Mini 1 Camera Mount

Welcome, welcome! Here is a camera mount for the Blink Mini 1 onto our AD5M. I modified a guard plate from the minimal enclosure since it's what's on my printer. If you have no enclosure or have the minimal then this can work for you.…

Pobrania
384
Polubienia
77
Ocena
4,75
P
PrintablesMZ4250

Blink Dog 2025

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Pobrania
368
Polubienia
43
Ocena
5
P
PrintablesDeltaken

Bird feeder camera (Wyze, Blink)

A bird feeder to spy on the birds in your garden. Compatible with Blink and Wyze cameras. 2 parts, the feeder and the roof. Both can be printed without supports. The roof snaps on the feeder to hold the roof in place. v2: Bigger holes for…

Pobrania
341
Polubienia
62
Ocena
4
P
PrintablesKevin Levy

Blink Sync 2 Module Wall Mount

A simple wall mount Blink Sync 2 Module that easily screws to the wall. Print in PLA with general settings, requires supports.

Pobrania
333
Polubienia
26
Ocena
5
P
PrintablesAJM

Blink Indoor Camera Window Mount

I was looking for an interior window mount for the Blink Indoor camera, similar to this one for the Blink Mini , but couldn't see anything available, so decided to design and create my own. This has been tested with a 2020 Blink Indoor…

Pobrania
327
Polubienia
40
Ocena
5
P
PrintablesJeff

Blink Mini Wall Mount

Created the model in Fusion 360. 20% infill with no brim or supports. Takes just over 2 hours to print. Wanted a mount to raise the camera and used two Command strips on the back for easy removal with no mess. Added a slot on the back to…

Pobrania
326
Polubienia
45
Ocena
5
P
PrintablesBetsy Weber

8bit Pacman Ghost Fidget Toy with magnet - Inky, Blinky, Pinky and Clyde

8bit Pacman Ghosts are back… as fidget toys! Quick and easy to print, their compact size makes them perfect for on-the-go entertainment, while the magnetic design adds an element of tactile pleasure, enhancing the fidgeting experience.…

Pobrania
317
Polubienia
50
Ocena
0
P
PrintablesResurrector

Key Holder with Blinking Owl

This model was created to add some flair to the amazing Blinking Eyes Owl model: https://www.printables.com/model/180339-blinking-eyes-owl-wall-key-holder. Refer to the original model for the Owl assembly. I have included an additional…

Pobrania
313
Polubienia
37
Ocena
0
P
PrintablesIV3ZAJ

blink camera mount for Neptune 4 Pro

blink camera mount for Neptune 4 Pro

Pobrania
313
Polubienia
25
Ocena
0
P
PrintablesLayerLux3D

UFO Abduction Lamp with blinking lights

Version 2 of the lamp: https://cults3d.com/en/3d-model/home/ufo-lamp-oneidmonstr For this Version you need: glas cylinder with both ends open about 80mm in width 27x blue LEDs 3x white LEDs 30x 200 ohm resistors 4x 2k ohm resistors 4x…

Pobrania
312
Polubienia
148
Ocena
0
P
PrintablesSparkey

Blink XT2 mount

Blink xt2 mount with original drill holes

Pobrania
303
Polubienia
25
Ocena
5
P
PrintablesSuppe12

Ankermake M5C Blink Mini Mount

This is an improved Mount for Blink Mini Camera at the Ankermake M5C. Please don't forget to use Supports. It sits a bit tight but does a great Job. Printing Time was 2h49min with usage of 75g Filament in Fast Mode. Feel free to remix an…

Pobrania
298
Polubienia
36
Ocena
0
P
PrintablesTFL123

Blink Camera Mount

Original Blink Camera Base, and an Extendable and more adjustable Version from me. The Printed Version of the Base works like the Original. Printed Part needed: Base Blink Original Extended Verion needs one 3mmx20mm Machine Screw and a…

Pobrania
293
Polubienia
54
Ocena
4,67
P
PrintablesTobiah Smith

Blink Mini Water Resistant Housing

This is a water resistant mount and housing for Amazons Blink Mini security camera. Unlike other model Ive seen, this does not cover the infrared light. Because of this, it is not fully waterproof. I have had my camera outside for 3…

Pobrania
287
Polubienia
45
Ocena
0
P
PrintablesTORX1

Blink Outdoor X2 camera protection rain

Blink Outdoor X2 camera protection rain Rain cover and protection, for the original bracket. Easy, just take off rain protection and remove the camera up to the battery change. Be needed: 2x m3x20mm 2x M3 nuts Alternatively, wood screws…

Pobrania
285
Polubienia
43
Ocena
5
P
PrintablesNoah Works

Walking Tank Blink Mini Camera Mount

The 3mf file has both parts oriented for the best print results. Supports only needed for the legs Glue the top of the frame piece to the bottom of the leg piece, with the open side facing up. bottom part came from here:…

Pobrania
285
Polubienia
95
Ocena
5
P
Printablesmerc

Bambu Lab p1p blink mini camera mount

Quick simple mount i made to use the blink mini camera that can be bought in your area from a hardware store or cheap on amazon around 35 dollars I made 2 different prints one with a mounting hole and one without so you can drill and…

Pobrania
270
Polubienia
46
Ocena
5
P
Printablesstickell

Blink Sync Module 2 - Outlet Mount (fixed USB power hole)

Wall mount for the new Blink Sync Module 2 that came with my Blink Outdoor (3rd Gen) camera. Included North American and European Outlets.

Pobrania
270
Polubienia
19
Ocena
5
P
PrintablesspecialK

Anycubic Kobra 2 Max Blink mini camera mount

A mount for a blink mini indoor camera to easily watch/monitor your prints. The camera just sits in its pocket. Shouldn't need supports to print Category: 3D Printer Accessories

Pobrania
266
Polubienia
21
Ocena
5
P
PrintablesSimon_Blades

Blink Mini Camera Mount for Flashforge AD5X

Blink Mini Camera Mount for Flashforge AD5X This mount is designed to securely hold a Blink Mini camera on a Flashforge AD5X , using three existing screw positions on the printer for a clean, non-invasive installation. Link to product -…

Pobrania
253
Polubienia
47
Ocena
5
P
Printablescoberfranc

Prusa Blink Mini Camera Mount

Mount a blink mini camera to the front of your Prusa MK3S+

Pobrania
246
Polubienia
27
Ocena
4,9
P
Printableshygy

Suzuki DL650 v-strom blinker/turn signal housing

This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :) Very big thanks for "remote" creating the modell to Barbér Máté . Print Settings Printer: prusai i3 rework 1.5 Rafts: No Supports: Yes Resolution:…

Pobrania
244
Polubienia
40
Ocena
0
P
Printablestmx1911

Blink Camera Dutch Lap Siding mount

Blink camera mount for Dutch lap siding (Menards)

Pobrania
241
Polubienia
32
Ocena
0
P
Printablesakf_was_here

Blink Dagger

Costume dagger with holes to press fit 5mmx2mm magnets. With magnets in place you can combine 2 to make one for a fun play factor. Print instructions Category: Toys & Games

Pobrania
235
Polubienia
32
Ocena
5
P
PrintablesStefan

Landrover Defender Blinker / Signal Cover

Since the original grills are too big for the I made these inspired by a design found on facebook but they now fit better. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.24 -0.1 Infill: 20%…

Pobrania
234
Polubienia
30
Ocena
0
P
PrintablesVic

Blink Mini Cam 3d Printer Mount

Fits nice allows for swivel and slide on rail. snaps onto camera and snaps onto rail.

Pobrania
230
Polubienia
29
Ocena
0
P
PrintablesTechButterfly

Blink outdoor camera mount holder

Blink cameras come with a cone-shaped mount that can be attached to walls and other surfaces using screws. I wanted to be able to move the cameras around without having to attach and remove the blink mounts or having to buy multiple…

Pobrania
224
Polubienia
31
Ocena
0
P
PrintablesMediaXYZ

Mount for Blink Outdoor 4 Camera

Basic bracket to mount a Blink Outdoor 4 Camera (and probably other Blink Outdoor Cameras) on to a post, beam, rafter, etc. using cable ties, velcro straps, string, ribbon, wire, or whatever else you have lying around (I used “reusable…

Pobrania
223
Polubienia
21
Ocena
5
P
PrintablesHolzerMax

Blinking owl - Keyslot backplate

I love the blinking owl key holder, but the original does not have a good way of attaching the part to the wall (except double-sided tape maybe). This is just a simple cutout for mounting with one small screw. Please note that the…

Pobrania
222
Polubienia
20
Ocena
5
P
PrintablesBoobFrog

Blink Outdoor Camera wall / window mount

Welcome to our practical solution for mounting your Blink Outdoor camera! This mount offers you the flexibility to attach your camera to a wall or a window, according to your needs. Whether you're monitoring your property or enjoying a…

Pobrania
219
Polubienia
23
Ocena
5
P
PrintablesFPV Smitty

Bambu P1S/X1 Blink Mini Camera Mount

Mount to attach a Blink Mini cam to monitor your print. Attaches to the top hinge of the door. You will need 2 M3x6 screws to replace the screws on your top hinge. And a Blink Mini, of course. You can print both on the same plate. I…

Pobrania
216
Polubienia
32
Ocena
5
P
Printablesash

Blink Outdoor wall mount

Mount your indoor camera outside

Pobrania
212
Polubienia
30
Ocena
4
P
PrintablesPeter Farell

Blinky : Simpsons

Blinky : Simpsons

Pobrania
211
Polubienia
40
Ocena
5
P
PrintablesGuido666

Stand for Blink Sync Module 2

A small stand for the Blink Sync Module 2. Prints with no supports. Print with 3+ perimeters, so that the walls are solid. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20mm Infill: 15%…

Pobrania
210
Polubienia
16
Ocena
4
P
Printableswagenfratz

Blink Mount - Vinyl Siding

Mount for a Blink security camera for vinyl siding. Modeled after the clips I use for Christmas lights so I don't have to nail or screw things into the house. They are removable so you can change the location of cameras easily. I ordered…

Pobrania
204
Polubienia
22
Ocena
4,67
P
PrintablesPenguinNinja

Video doorbell holder (compatible with Blink Video Doorbell)

I ordered two video doorbells for my front and back doors. As I was trying to install the batteries for the first time, the clip that held firmly in place the plate that covered the batteries broke when trying to remove it. I was refunded…

Pobrania
203
Polubienia
19
Ocena
0
P
PrintablesDanae

EARRING PENDANT BLINK-182 ROCK BAND BLINK 182

The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…

Pobrania
203
Polubienia
37
Ocena
0
P

Sabertooth blinking mask/ fursuit headbase

This object is licensed for PERSONAL USE ONLY . For commercial use contact me at instagram: @portallabs Materials: PETG / PCTG PP / PETG / PCTG for the flexures Very Important: Correct slicing orientations are specified in the…

Pobrania
202
Polubienia
50
Ocena
0
P
PrintablesAkiastone

Blink mini wall mount

This is a quick wall mount for Amazon's Blink Mini security camera. You will need 3M tape to attach it to the wall

Pobrania
197
Polubienia
16
Ocena
5
P
PrintablesKitReplicados

Blink Outdoor Camera Hood

Blink Outdoor Camera Hood Print Settings Printer Brand: MK3 Printer: Prusa i3 **Rafts:** No Supports: No **Resolution:** Any Infill: Any Category: Electronics

Pobrania
196
Polubienia
18
Ocena
0
P
PrintablesSpot

Blink Camera Holder

Needed a holder for a Blink camera . Camera just slides in . Mounts to flat surface.

Pobrania
195
Polubienia
42
Ocena
0
P
PrintablesAnthony Liggi

Blink camera housing for campervan

This is a modified version with a larger hole for a magnet so it can be stuck onto your van, works great

Pobrania
193
Polubienia
11
Ocena
0
P
PrintablesChromdioxyde

Blink Mini Privacy Cover

I have a camera in my home office for keeping an eye on my dog but want it to be closed off when I am home and working. I saw a similar design on Etsy, but there were no print files available, so I made a quick remix in Tinkercad. This is…

Pobrania
192
Polubienia
21
Ocena
0
P
PrintablesCfrazier31

Blink Camera Stand

I originally had the a mini blink camera sitting on a box so I could watch the 3d printer doing its thing remotely. This stand was created to give me more of an elevated view. I used the 2 screws that came with the camera on the sides and…

Pobrania
190
Polubienia
25
Ocena
0
P
PrintablesTime Traveller

BLINK 4 outdoor Snap on cover

<UPDATE July 2025> - Feel free to use the measurements, may ppl report that the motion detection and “nightvision” is not working when the cover is on. I use them as sensor detedtion in the condo with white cover and I have no issues, but…

Pobrania
190
Polubienia
15
Ocena
0
P
PrintablesProforris

Blink Mini Camera Pet Cage Mount

This assembly accepts the Blink Mini Camera with ball socket and allows it to be mounted to a wire cage, as present with small pet cages, dog kennels, etc.! I personally use this to observe my guinea pigs while I'm at work. The assembly…

Pobrania
187
Polubienia
35
Ocena
5
P
PrintablesKevin

Blink Doorbell Bracket

Printed with Prusament PETG Jet Black 0.2mm supports are required.

Pobrania
181
Polubienia
15
Ocena
0
P
PrintablesFilip Batarilo

Kawasaki Z900 Blinker Adapter

Ich wollte meine Blinker Vorne an meiner Z900 SE umbauen und habe im Internet Adapter dazu bestellt. Diese haben mir erstens gar nicht gefallen bezüglich ihrer Oberfläche, ausserdem hatte ich die Falschen bestellt die gar nicht passten.…

Pobrania
179
Polubienia
9
Ocena
0
P
Printablesmeister2005

AnkeMake M5 Blink-Mini Camera Mount v6

This is a modification of Alex B ( https://www.printables.com/de/social/524533-alex-b ) camera mount. It will hold an Amazon Blink-Mini camera. This is my first project. I used Thinkercad. What is different to the original model: The…

Pobrania
178
Polubienia
21
Ocena
5
P
PrintablesKorle

Blink Mini housing

I created a simple and small Housing for my Blink Mini Camera to use it outdoor. Just two pieces. A frame for the camera, and a Roof/Backplate. Both pieces are slide easyly together. for use with Original Wall mounting. In the Future, i…

Pobrania
177
Polubienia
32
Ocena
5
P
Printablespowerscripter

Blink Outdoor rain - downpipe mount

I was looking for a way to attach my blink cam to the rain pipe without additional modifications to the pipe or the cam. Therefore, I have designed this bracket. It is held with a zip tie on the pipe. Sits well even in stormy weather.

Pobrania
174
Polubienia
15
Ocena
5
P
PrintablesPrinthead

Blink Mini Camera Mount

This is a stand to attach your Amazon Blink Mini camera to your Prusa MK4 (or similar) printer. It features a clip to clip around the front plate where the stand attaches to the extrusion to keep the stand from sliding down the extrusion…

Pobrania
174
Polubienia
35
Ocena
5
P
Printablescbyoo

Blink camera wall mount-tiltable

Tiltable Blink camera wall mount Use below bolts, nuts and screws. 1) Socket cap screw: M3-0.5x10mm x2pcs https://www.homedepot.com/p/Everbilt-M3-0-5-x-10-mm-Plain-Metric 2) Nylon lock nut: M3-0.5mm x2pcs…

Pobrania
169
Polubienia
29
Ocena
0
P
PrintablesXor

BLINK Tubular mount

The Blink calera can be scewed with 2 standard fan screws like they're used in any computer for the fans.

Pobrania
167
Polubienia
14
Ocena
0
P
PrintablesDon English

Blink Mini Camera Mount for Prusa MK4 (Mount Only)

I was looking for a way to setup my Blink camera to keep an eye on my Prusa MK4. I stumbled across Damon's model and liked the design. I had to modify the mounting piece that attaches to the printer to make it work with the MK4. I found…

Pobrania
167
Polubienia
46
Ocena
5
P
PrintablesRob M

Blink Sync 2 Outlet Mount with LED Cover

As with the original, you need to insert the power supply from the back side because it is (inexplicably) flared a tiny amount. I printed in PETG but any material should work fine.

Pobrania
166
Polubienia
15
Ocena
0
P
PrintablesJohn D

Blink Doorbell corner/angled and down angle mount wedge

Remixed the original to have a slight downard angle.

Pobrania
166
Polubienia
12
Ocena
5
P
PrintablesDamien Banwell

Blink Camera Magnetic mount

Decided that I wanted some removable mounts for my Blink security camera's I use on my campervan, there are 2 main body files, one is a 30 degree angle, these are for the rear and sides of the van, the other is at 5 degrees for the front…

Pobrania
165
Polubienia
17
Ocena
3
P
PrintablesJamie Anderson

Fortnite Blinky sprite

the Blinky sprite

Pobrania
162
Polubienia
14
Ocena
0
P

Nasal Activation by Snarling Amplification Blinking

OUTDATED!! Make the Blinking module featured in This instead: Nasal Activation by Snarling Amplification Blinking (NASA Blinking for short) Made by: Costescu Catalin Mihai (@portallabs on Instagram: Tag if you post this design somewhere…

Pobrania
160
Polubienia
40
Ocena
0
P
PrintablesGwen28

cache / protection blink video doorbell

English: This thing is about a protection of the amazon blink video doorbell. I printed this 3d model in petg and it works very well, the adjustments are pretty good and there give at the doorbell a sun and steal protection. There are 4…

Pobrania
159
Polubienia
16
Ocena
4
P
PrintablesMichael R

Blink Outdoor 4 Camera Mount

Camera mount for the Blink Outdoor 4. Able to slide the camera with its mount easily in and out. Only requires a single screw unlike the existing mount. Also much easier to remove. Print with internal supports.

Pobrania
158
Polubienia
14
Ocena
0
P
PrintablesAtr6x

Nightblink - Toothless Inspired Dragon

Story: In the quiet corners of a star-scattered night, Nightblink stirs—an elusive, wide-eyed guardian of dreams. Said to be born from the last blink of twilight before true darkness, this dragonling is known to curl up beside moonlit…

Pobrania
158
Polubienia
23
Ocena
0
P
PrintablesTG

Blink Mini 2 Camera Wall Mount

A wall mount for the Blink Mini 2 Camera. Can attach with 3M adhesive sticker or 2 screws of 4mm diameter (I used 4x35mm screws). .stl and .f3d files included

Pobrania
156
Polubienia
9
Ocena
0
P
PrintablesRob M

20º Blink Doorbell Camera Wedge Mount (REMIX)

This wedge sits between the wall and the camera mounting plate to set the doorbell at a 20º angle. You will want to print it in a material that can handle whatever elements you put the camera in, though frankly I've had good success with…

Pobrania
156
Polubienia
18
Ocena
5
P
PrintablesTORX1

Blink outdoors X2 camera, ball head bracket with rain protection.

Bracket for ratchet straps, universal for curves, flat, or edges. Blink outdoors X2 ball head bracket with rain protection. Simply, take the rain protection off and take out the camera to change the battery. To be needed: 1x M4X10-15 mm…

Pobrania
154
Polubienia
23
Ocena
5
P
PrintablesJ3D_Designs

Ender 3 V3 SE Right Side Tray with Blink Mini Camera Mount and Nozzle Tray

This is another right-side tray for the Ender 3 V3 SE but also includes a mount for a Blink Mini Camera held in place with the help of a 1" round Magnet you can get anywhere. Tray also includes a spot to hold nozzles for the V3. I made…

Pobrania
154
Polubienia
30
Ocena
0
P
Printablesinteractive3

Blink Gen 3 outdoor camera 90 degree wall ceiling mount

I built this but didn't end up making it so buyer beware - you may need to tweak a little. The two holes for mounting the stock conical mount are made for M3 machine screws. One side has a recess for an M3 threaded insert. The other side…

Pobrania
153
Polubienia
18
Ocena
4
P
PrintablesR3V9K

Jeep XJ blinker lightbar

i made this off of my 98 Jeep Cherokee Xj. will fit a 97-01 XJs. My aftermarket headlights have blinkers integrated so i was able to remove them. The bracket is designed with full adjustment for a 7'' led light bar on amazon. see below.…

Pobrania
151
Polubienia
22
Ocena
0
P
Printablesmscalora

Blink Mini Camera Window Mount

I needed to mount a Blink Mini camera to a window, the available models looked heavy and overdone so I whipped this one up in Fusion 360. I used a bit of double-back tape to attach to the window, holding so far. Tape on Amazon:…

Pobrania
151
Polubienia
28
Ocena
4
P
PrintablesTioh

Housing for blink outdoor camera

Housing for blink outdoor camera. I made this model to attach a Blink outdoor camera to a tree.

Pobrania
150
Polubienia
9
Ocena
0
P
Printables1967kevin

Wall Mount for Blinking Eyes Owl

This is a wood textured wall mount for two Blinking Eye Owls https://www.printables.com/model/180339-blinking-eyes-owl-wall-key-holder designed by djedje_zr7 . I loved the owls, but wanted a way to mount them on the wall together. This is…

Pobrania
149
Polubienia
37
Ocena
0