1463 modeli
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…
A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
This is a extender for oil draining on a Honda snowblower with belts. -One model is made for 2009 HS970 with belts. This is the type with the “tongue” under the drain plug. You need to add support on the “wings”. The 18cm one fits…
A completely revised version of my popular Makita nozzle attachment. The printing time has been reduced and the accuracy of fit has been adjusted. The new shape improves the airflow and the fan doesn't have as much back pressure. This…
I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…
Here's a model to help mount the Dewalt DCBL722 Leaf Blower, wrapping around the handle for a secure mount. I've also included Fusion 360 and Step source files if you want to customize (includes a model of the handle itself). Bill of…
This is an attachment for the Makita DUB184 18V Brushless Electric Blower . Note: It may fit other models that use the same blower funnel but I have not tested with others. I have included as many files as I could so it can be modified…
Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
This model is a snow blower engine kill switch key. Most snow blowers have a plastic key that prevents the engine from running if the key is missing. The manufacturer key does not have a hole to put the key on a key ring. This key fits…
Für Metabo LB18 Laubbläser - Flachdüse gebogen. Die Düse wirkt auf den Fotos so klein: Auf dem letzten Foto sieht man aber, das die Düse einen Großteil der Druckfläche einnimmt… Perimeter:6 Top/Bottom:6 Kein Support Filament: Flashforge…
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
This is a adapter nozzle for the Milwaukee M18 FUEL Blower (3017-20) that allows you to attach the Sealegend Gutter Cleaning Attachment Kit Compatible with EGO leaf blowers https://www.amazon.com/gp/product/B0CWRKSYLP/. That kit is…
Modified fan shroud for increased airflow, thanks to the bigger 5015 fan Sized around my Creality hotend, shouldn't be a problem for the stock hotends though Remix of: Sunlu S8 Plus Fan Shroud by turbooston - Thingiverse And Red Squirrel…
Enhance your Prusa MINI+ with this 5020 fan upgrade. Replace the MINI-x-carriage.stl part for improved layer cooling. 5020 fans mean more airflow thanks to their dual air income. This mod not only eliminates stringing but also handles…
Originally it was just the filament sensor bracket designed by twammons on thingiverse which is fantastic, but I then wanted to add a second fan for part cooling that is a direct bolt on and doesn't get in the way of anything yet also…
Fan duct adapter for blower fan 4020 infill: 20% Support : Yes I know my model is not perfect but is functional Thanks to whoever will download
I needed two wingnuts for my snowblower. I created them, then printed with a pause to insert the nut (the thread is 5/16 x 24 (If I remember correctly). I inserted a pause just above the top of the nut. This pause is used to insert a nut,…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
Printed with PLA, without support. Z=0,3 20% infill Add peace of plastic bag. The best one is tiny bag in which Prusa send parts. You can add endless multipart to the BloWer main and get deeper voice. You can remove and add parts and get…
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one
Its an Turbine blower remix to fit an 775 motor. The original is from JolietDelta. I improved the design to fit an 775 motor. Also the turbine is a lot bigger than the original, the parts fit on an 200x200x100mm (LxBxH) bed. You can…
This is a 3D printed 5015 type blower/fan that is suitable for Prusa i3 or any other type of printer. I used a spare fan ( Multicomp MC36257 with sleeve as bearing) that I had laying aroung and modified it to use it with these 3D printed…
I've been using the DeWalt DCBL722 20V leaf blower now for better part of a year. I was always disappointed it only ever came with the one nozzle on the end of the blower called a “concentrator” but it's really more of a diffuser. I was…
Yes, A remix of a remix. TL;DR stock hotend printers use: Duct_Left_Stock.stl Duct_Right_Stock.stl ⠀ I really liked the shroud and my V3 SE was lacking in the cooling department. so after 4 test prints and a bunch of measuring I present…
Wall mount for the Milwaukee M18 MBL18 Blower Inspired by https://www.printables.com/model/580193-milwaukee-m18-blower-wall-mount-2724 but did not fit the Blower Model i had. Other mounts in photos M18 Hedge Trimmer…
Replace noisy hot end fan on the Sprite Extruder with a quiet 5015 blower fan. This is a remix of the Ender 3 S1 Hotend Fan 4020 Replacement Bracket . This remix mounts a 5015 blower fan instead of the 4020 blower and is further offset…
This is a really simple dust blower. Print it from TPU or a similar flexible filament. Make sure that especially the tip gets enough cooling. If the hole is not the right size, you can simply cut off the tip or heat a metal wire or…
I printed 20mm, 3 walls and PETG. You need at least 2 M3X20 pan head screws to secure and stabilize the blower into the part. I used 4 because I wanted they super tight :) I managed to print the left one without any supports and for the…
I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)
This replaces the stock 4010 Fan with a 5015 Blower. Pushes more air, but be advised, noise level will increase. You'll need (2) M3x20 Flatheads with Nuts to mount the Fan and (2) M3x20 Pan Heads to mount the Shroud. Fans I used:…
Tout est dans le titre, blower 4020, pour modélisation de projet…
Designed to suck only clean air. For example, from the filament package. Don't try vacuuming dust... Designed to have a firm friction fit. The firmness will depend on the printer and the filament. For the best results, cut the model and…
It's an fan adapter which takes a 120mm fan and directs the airflow 90 degrees. It's kinda a special model as I used it do direct air from the front cabin of my VW T6 back to the storage area, over the dividing wall. But the design is…
I really like this style of leaf blower, but it does not store well. I built a simple wall bracket to keep it off the ground and out of the way. Print instructions Category: Outdoor & Garden
The original model provided by blinkz did not work on a 765 CFM so I re-modeled it with the proper dimensions. Part is already oriented for optimal strength. Buy me a coffee If you like my work, you can buy me a coffee !
Measured dampening is 4dB on my 5015 S1 hotend mount, measured on bed. There is very small flow restriction after mounting. See my other model for the 5015 Ender 3 S1 & Sprite Extruder part cooling duct ____________________ Printing…
This is the STP-file of my complete RC snow blower assembly. It was originally designed to fit with the Traxxas Summit RC car. However, I would recommend a larger RC car because the snow blower is too heavy for the Summit. Here are a few…
Motors can be mounted to the blower using M3 screws or glue. The screw holes are designed for motors with a diameter of 24mm. The top part of the blower can be just clipped into place but i would recommend gluing it in to prevent any air…
Regenerative compressors provide good pressure head and medium flow at low RPMs. I designed this one from scratch in Sketchup to play with the concept for potential CPAP cooling on my printer. It starts to build pressure head at fairly…
Made a tool for dusting off camera lenses and other equipment. There is a short and long version. Both are available with or without hole at the bottom, depending on your preferences. Without the hole at the bottom you need to take care…
I've been working on an improved blower shroud based on another design on Pursa Printers. This is just a work in progress, but works fairly well. Join the discussion here:…
Makita blower Nozzle DUB 185 Kurze nozzle um den druck zu erhöhen, ich nutze sie für die Arbeit, um meine Werkzeuge von Sägestaub zu befreien. Eignet sich aber auch, um ein Auto zu trocknen. Makita blower nozzle DUB 185 Short nozzle to…
BOM (Book Of Materials): 2x M3 nuts (for the fan) 3x M3x25mm screw 1x M3x6mm screw 3x M3 Washers (for the M3x25 screws - optional) 1x 5015 Blower fan Instructions manual : https://www.thingiverse.com/download:7569024 If you dont know what…
A wall mount bracket to hang the Ryobi 18V Leaf blower (Model # P2180).
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
Introducing the Milwaukee Leaf Blower Gutter Cleaning Attachment, your ultimate solution for maintaining clean gutters without the need to climb onto your roof. This innovative printable file is designed to make gutter maintenance easier…
Hi there. I'd like to present my latest project. Turbine hand cranked blower. it uses planetary gear with 1:6 ratio so for every crank turn the blades of turbine performs full six revolutions. It's great for barbecue and just for fan. All…
This AD5X recirculation duct and blower fan, A thank you to Jwidess for this design This is designed to be printed with PETG because of chamber heat, you won't need abs or asa because the chamber heat won't get that high. PETG can handle…
This is a nozzle that fits onto the Milwaukee m18 compact blower that I designed to be more of a jet. The original nozzle has a larger opening so I made this with a 10mm diameter opening to make it easier to blowing out my vacuum filters.…
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
The stock blower fan was probably the most noisy part of my Ender 3 V2 Neo, so I had to order replacement on AliExpress. After the new fan arrived, I discovered that it doesn't fit the original fan duct. Initially I tried to model the…
A wall hanger for DCBL722
WARNING: Apparently this doesn't fit the newest version of the M18 Blower as they have reduced the size of the factory nozzle. A proper fit could be achieved by scaling the STL. This is a little focusing nozzle I made for my M18 Fuel Leaf…
I don't have an wind meter to measure specific numerical changes, but it does blow things farther. I want to say sorry to everyone who needs that clip. It was originally in my plan, but the finished product I printed shrunk a little bit…
A nice usecase for Prusament TPU 95A. Read more in the announcement article and get your spool from our eshop .
Hi, guys. I'm new to this forum and the whole 3D printing world, but I have upgraded my first fan duct for my Ender 3 v3 SE to dual 5015, and the performance is pretty good. The mounting hole and hook of the left-side duct are still hit…
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
New versions available: Single Fan: https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v Dual Fan: https://www.printables.com/model/543502-the-amonite-sovol-sv06-fan-duct-dual-5015-blower-f Designed…
Took off transmission and added fly wheel. Scaled to 1/10 for back of RC truck.
ryobi workshop blower nozzle, remixed to bit more gradual. I use to for blowing grass off my golf cart during early and late season rounds. print upright with no supports, should print fine, needs at least 160mm z height.
version 2 of my dual 5015 fan upgrade for the elegoo neptune 3 pro plus and max. This model has increased air flow flow over v1. Helps keep the stepper cool by pulling air directly off uses much less support material, prints fater, and…
This a a stubby nozzle with a 70mm opening for EGO branded leaf blowers. This was specifically designed for the LB7650 blower but may fit other models as well (confirmed the fit works on a LB5300 as well). The design incorporates crush…
Credit to https://www.thingiverse.com/thing:6297778 for the blower mount. (EDIT found that on printables too so it's credited in the remix now, thanks T3Kmaker) Tested both versions extensively now. I'd recommend the curved version, I'm…
I wanted a two-fan setup so I added this Left Side Mount to match what I had on the right. It attaches with the original M3 screw. You'll need two M3x30 machine Screws with Nuts for the Fan. If you Make this one… Be advised that you'll be…
A friend wanted a round nozzle to fit his Milwaukee blower. I based this design off Epicn8's design and modified it to have a round end. Since I don't own one of these blowers, I wasn't able to measure the part and fine-tune the fitment.…
Leaf Blower Garden Gnome – The Yard Enforcer! Tired of leaves messing up your garden vibe? Meet the grumpiest little lawn guardian you'll ever print – the Leaf Blower Gnome. With his serious scowl and industrial-grade blower, this guy…
The blower is RYOBI ONE+ R18TB-0, and it's about 60 euros here in Europe. The blower has very good air flow but to get most use out of it, you really need some adaptors for it. This adaptor fits our camping mattresses and I'm sure all…
This is an improved version of a hotend cooler design I made a while ago. Its airflow is substantially better than the previous version. As well, you can now peek at the nozzle from the front of the machine so that you can see how the…
blower nozzle for the Ryobi 18v leaf blower so I can use it to blow snow off my driveway and vehicle.
Wall mount for Makita DUB362 Leaf Blower no support need the design was made to store it with or without battery
A kind of funky fan shroud for a Nvidia Tesla P40 that cools not only the card at a rated CFM but also blows air into the next PCI slot for 10gig networking, HBA, etc. PWM controller makes the fan basically silent in a full tower case.…
This is a strap mounted blower to keep the fog out of a pair of airsoft goggles. Dissatisfied with my ExFog unit, I decided to build a small run of an improved design. My main complaints with the ExFog unit I bought were it was too…
Blower 5015, design homemade, pas parfait, mais plutôt correct dans l'ensemble !
It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…
This nozzle fits the Milwaukee M18 (2 battery) (2824-20) blower.
This is a 3-D printable 5015 blower style fan that can be 3-D printed. It works quite well and is a cool demonstration of the functional printing capabilities of our 3-D printers.
A medieval soldier blowing a horn. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…
This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…
This is a large blower intended to move large amounts of air very quickly. It uses a 775 motor. DO NOT PRINT THE "EXPLODED VIEW" OR "ALL" FILE! Note for assembling: The motor may or may not have a metal band around it, depending on the…
An adapter to replace the 4010 extruder cooling fan with a 4020 blower fan. Has good clearance with the gantry, no change in build area. Mounts to the stock extruder with stock screws, 4020 fan mounts to the bracket with 3× M3×18 bolts.…
Printed in PETG - requires two flathead screws for mounting. Mounting holes are beveled for 8mm head. 1-16-2024 - Added fusion model and v2 with vertical holes for mounting to a stud.
I remixed the fanconnector as it was too small for my WinSinn 5015 fan and my part cracked upon insertion of the fan.
My Parkside blower was left in the rain and stopped functioning. After opening it up, drying it out and applying power to it, it suddenly started again and, because of the force, fell out of my hands on the concrete floor… That caused…
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
A quick and dirty (emphasis on dirty) hack of HojoWork's 90 degree 120mm blower duct. Removed the bend so you can conceivably mount 2+ cards on the same board. Requires supports to print. The first one I printed worked out fine, but the…
Our cordless Makita blower kept sucking in my pants material while using. This bayonet cap fits into the inlet and stops this problem. I have also included the STL for just the bayonet cap section which fits the inlet and the outlet. In…
Designed and engineered in Fusion 360, the M18 blower nozzle represents a significant breakthrough in optimizing airflow and boosting performance. The innovative design features strategically placed venturi holes, carefully crafted to…
Front-Mounted 5015 Blower Mod for Qidi Plus 4 This is a modular front-mounted 5015 Blower mod for the Qidi Plus 4 made for using the stock inductive bed-meshing probe, or either a Beacon or a Cartographer eddy current bed-meshing probe.…
I needed blower and dont have compressor. Found Joopjoops design on Thingiverse and I love it. But I had only ender 2 (150x150mm bed). So I draw smaller case to fit my printer. Works like charm. Thanx Joopjoop!!! Printed with prusament…
New upgraded version available on my profile: https://www.printables.com/model/483474-sovol-sv06-fan-duct-5015-blower-fan-v3 Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Glueing optional but advised…
This a remix of a model originally created by vehicular on Thingiverse. It fits an EGO 530, 575, 580, or 650 blower which can make it easier to dry off your car than the much longer original EGO nozzle. I shortened it to be able to print…
There's lots of cool blower adaptors online, but I needed something more compact with a tighter diameter. I was inspired by many projects and online products to make my own nozzle style. I use this mostly for car drying. I have left this…
First of all: What is this about? I really like the look of the Mini Stealhburner, but I dont like its weak cooling performance on my Voron 0.2. This printer is capable of printing fast - especially with a CHT nozzle. But overhangs,…
