234 modeli
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
nothing to say. just a black box, print it, fit it …
Wydruk około 3,81 €–4,66 € nettoWstępna wycena jednego wariantu
In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…
Wydruk około 6,68 €–8,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bust Tribute to the Black Panther Chadwick Boseman He is forever a member of the Avengers So far only for the brave because I'm still printing a first test ;) Print instructions I made more versions 1 - complete bust (I recommend ear and…
Various on-board holders for Bose A20 Control Modules. The modules fit in perfectly and are aligned with the top layer of the holder for optimal accessibility of the keys and volume knobs. Also fits for the Bluetooth Version. Fix in a…
This is remixed from Stefan's holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series (possibly other Airbus models that share this clip?). This version also adds a headset hanger. Print upright (with the cable…
This model uses square nuts in the bottom for 3m screws. Nothing fancy, I made it for my truck and haven't made a bracket to mount it to yet. Make sure to print two of the bracket supports. I made this out of petg to be left in the car,…
Keeps those pesky control bricks off your lap and out of the way while you're flying! (CRJ series) Variations include the A20 and A30 series controllers and hooks to go over the side of the cubby, either on CA or FO side, (both work)…
This is a simple holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series. Print upright (with the cable cutout on the build plate) and supports on the build plate only. 15% infill works fine.
An easy way to mount your Bose Radio in the cockpit.
a caddy for your Bose A20 com box. holds 2 spare AA batteries and fits on snuggly
Inspired by the model “Wall shelf for speakers” by Arkadiy01. Resizing the original could have worked but remixing allowed me to make a few modifications. I added a 2nd screw hole, moved the angled side brackets in line with the back and…
Normally the Bose Soundlink Micro lies flat on the table or strapped to something. This stand is for either to stand vertically as in picture or mounted to a wall e.g. in your workshop! Straight forward to print. 0.20 with 15% infill.…
These dimensions are only validated for NB Miata's equipped with the Bose stereo. Hole sizing in the model is 3mm, intended for OEM screws. Also included are screw insert door plugs in case any of your factory door inserts have…
After replacing the cushions on my Bose QC35 headphones 3 or 4 times, the flexible trim ring around one of the earpieces broke. I designed this and printed in TPU (probably not really necessary). Printed on MK3S+ at .15mm layer height.…
This is a mount for the Bose Soundlink Flex bluetooth speaker. I wanted to attach it to my electric golf trolley - the MGI Navigator Ai. So I created the bracket for the speaker along with parts to attach it to the trolley. If you are…
The on/off switch on the Bose QuietComfort 35 has been known to break after a bit of use. I've had my headphones for 4 years, and previously was able to superglue the broke switch back together the 1st time it broke, but this time I had…
Display stand that allows the Robosen Optimus Prime Founders Edition to stand up while powered down. Modeled in TinkerCAD and then printed on an Ender 5 for the base and Elegoo Mars 3 Pro for the uprights. Some sanding and finish work…
Wallmount for Bose Surround Rear Speaker 700 You need additional 4x M3x30 screws to fix the Speaker on the Wallmount. Printed in ASA - use the 3mf File it is already with organic support which works real great!
A quick design for my kids. A small embossing tool with a cute cat shape. Features: Works with 5cm x 5cm paper piece. Thin paper can be pressed by hand. Thick paper requires more force. I recommended to use total body weight. Commercial…
The Bose headsets are well liked by pilots, but the model produced in the early 2000s has weak plastic yokes that break. This is a printable replacement. My brother has used the headset with the printed yokes for over 4 years with no…
I wanted a basic wall mount for my new speakers. Very easy to print and install. Got the bracket hooks to line up real snug to the speaker. No slop install using 2 x screw in wall anchors or screws directly into wall. Feedback and…
Bose A20 (TM) control box mount. Attach the dovetail mount with the curve pointed up either by drilling and tapping for flush-fit screws or by using your favorite double-sided adhesive. Then slide the mount itself onto the dovetail. If…
Low cost stands for Bose Soundbar 700. I wanted it to be raised so i could place it closer to my TV. printed it without supports and with 15% infill
Create a better listening angle for your Soundlink Mini =)
I needed something to fit my bose solo soundbar on my desk, without wasting to much space. So I designed this simple stand and it looks pretty good. I can fit my soundbar under my ultra wide 42" screen and a USB-C dock underneath.
Update 2025: I just uploaded a Version 2 of these and the Step file if anyone wants to make changes to them. Update: Just added some alternative feet for those that would like to angle the speakers back, also added 2 mock-up 3D files so…
Uses this connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Bose A20 Control and battery holder
Bose Soundlink Flex SE Bluetooth Speaker Wall Mount
As I didn't find a mount for the Bose TV Speaker online, I made one - may someone else needs it too. Saved 25€ and the shipping time. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 1 Infill: 100…
Bose Companion 3 Satellite stands. Created with low profile so the speakers could be fitted in a small / low place. Please leave a like and show a "Make" if you printed this model, thank you. Print instructions Category: Audio Summary…
After having used my first bose soundbar mount for the CHIQ Television for some weeks, the TV broke. Now I bought a new LG TV which is not having any possibility to mount some self printed part directly to the TV without drilling any…
Bose Acoustimass Series Stand speaker mount adapter - Adattatore per Bose Acoustimass Update 26/04/2025: added BOSE4 Rev Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your…
Version 1 of these shelves (https://www.printables.com/model/134832-bose-companion-2-speaker-wall-shelf-shelves) has shorter sides such that the cantilever dips 1-1.5mm. They hold up for at least 10 months in service but I wanted to make…
I wanted to clean up my desk and the massive Bose Companion 5 Speakers have a big, heavy stand and were always in my way and behind the monitors. This is a 2 part design with one wall mount that has a pocket and a speaker clamp that snaps…
Side mounted holder for Bose A30 Controller. 2x Mounting Holes sized for #10 screws. Picture shown with https://a.co/d/0WPpjFQ Printed in ABS with 3 walls I believe the model could be mirrored for mounting on the right but the Bluetooth…
A new Liner for the QC25 when the old one break. No glue needed. Perfectly fit and won't move.
very easy to print heaphone holder, ideal to be stick with command strips size M. the most perfect fist layer for this is given by an ultrabase / glass printbed for the command strip to stick perfectly due to the shinny finish of the…
There are several models available for the QC35 headphones, but none that I saw have a vertical mount that I could use - so I made one. Maybe you can use it too. Does not need support, the bottom cutouts are at 45°. Shouldn't need a lot…
This custom-designed stand is tailored for Bose Companion 5 speakers, providing a low-profile solution to fit comfortably under a monitor on a desk. The stand is at a slight angle ensuring the speakers are directed toward the user. The…
Uses this 90 degree connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
for sounbar bose 300 leaving place for cables and having only one hole for fixation in the base
You can use this to allow a Rockford/Fosgate 8 inch subwoofer driver to fit into a 2017/2018 Audi Q7, replacing the BOSE driver. The upgraded driver is under $80 and weights twice as much as the BOSE unit, and has more travel. Note that…
This floating wall mount is designed to use the existing mounting holes on the back of the Solo 5 and allow for easy removal of the soundbar at any time, while still guaranteeing a sturdy mount. The soundbar sits 15mm from the wall which…
Printed Sideways in PETG but i think PLA will also be fine 3mm Wood Screws
This mounting bracket for Bose Quiet Comfort 45 Noise Canceling Headphones can be mounted anywhere you want to quickly hang up your headphones to get them out of the way. There is a recessed rectangle on the back for 3M double-sided…
Mir hat das Logo gefallen und wollte es mal in 3D erstellen. Vielleicht fehlt jemandem das Logo auf seinem Lautsprecher.
Simple but stylish stand to store your headphones on a desk or night stand. Designed for the Bose QC45, will likely fit other similar over-ear headphones. Printed on Bambu X1C. 0.08 Layer height. PLA Basic. Tree supports.
Video stand for a smartphone and the Bose Soundlink Mini II speaker. Should be easy to print, minimal support needed.
Require 3 M5 * 20mm to be wall mounted and also for a tigher fit you can add some sticky felt to make it more stable
Ikea Skadis holder for Bose Soundlink Revolve Speaker
English: The new stands are designed to be placed under a monitor. Unfortunately, the original stands are much too large and do not offer any setting options. Here is a guide on how to remove the old stand. But be careful: it is possible…
This stand has many different purposes. For me, I used it as a way to hold the speaker over my monitor's base.
Bose Companion 3 Satellite wall mounts. Please leave a like and show a "Make" if you printed this model, thank you. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.2 Infill: 40…
This is a bracket to hold a Bose SoundLink Flex Bluetooth speaker on a Peloton bike. I wanted to have an easy method that holds the speaker securely while on the bike, while also being able to take the speaker with me. The rubberized…
Just a simple bracket for mounting the common Bose TV Speaker to the wall, the bracket has a 5 degrees angle to direct the soundbar slightly downwards. The model this is designed for: Bose TV Speaker Print on its side for maximum…
The liner on my Bose QC25 failed, so I decided to make a replacement. You will need to glue it with to the headphones over-night. I used multi-purpose glue to stick it, you could also use super-glue, but I would be careful cause…
I remixed the original model to make room for bigger Screws. Hole Diameter is now 4mm for the screw and 8mm for it's head. I printed in in Aurapol PLA at 0.2mm Layer height. Color “natural”.
The stand elevates your speakers 20 cm above your desk in an aesthetically pleasing way. At the back there is a little recess where you could clamp it to your desk. Overall it is quite sturdy while appearing lightweight. You can easily…
A mount to allow you to clip and clamp into place a pair of Bose Companion 5 speakers onto a desk-mounted monitor arm pole. This is designed to use the original screw that mounts the speaker to the stock stand. I found these stands to be…
There is a recession in the center of the shelf to fit the protrusion in the bottom of the SoundLink that needs supports; print it with the screw holes facing down. I used PETG, but PLA should work fine. The screw holes are sized for…
After some research I decided to create my own 737 hanger for headphones. Specifically designed for Bose A20, but other models fit easy as well. The hanger is designed to be clamped onto a sun visor rail. Designed in a way to fit FO as…
The last of my remote control holders (for now.) This one's designed for the remote for a Bose soundbar from 2019. The remote in question is pretty generic rectangular membrane thingy though so I'd wager that it works for quite a few…
I don't like things in my pockets, exspecially large earphone pases. The case has holes built into it for the USB Ccharging port and the reset button. Use double sided tape on the front and back of the case to hold it inside the holder.
Bah tout est dit hein. Adaptateur pour l'encadrement autoradio sur Renault Supercinq, afin d'y poser une enceinte Bose Mini SoundLink. Il y a un trou pour passer des câbles type chargeurs et autres. L'enceinte se mets et se retire,…
What you also need: Screw: M5x20 Pipe: Diameter 20mm, lenght variable Was man ausserdem braucht: Schraube: M5x20 Rohr: Aluminium Durchmesser 20mm, Länge variabel. Stands for my Bose Acoustimass 10 Series II Surround-System. It was created…
Support de BOSE Mini Soundlink mural Fixation à l'aide de 2 vis ou par collage avec du scotch double face
The compact speaker stand for Bose satellites are designed in one piece. The speaker cable is routed inside the stand so that it is not visible. It first comes out of the base at the back. Due to the size, the speaker stand is ideal for a…
Just slice it and it's ready. As it's a quick print, use 40% infill to add some more strength to it. The case only acts to prevent the edges of the headphones from getting scratched on surfaces. Most likely you will need some glue to…
I've used a SoundLink Mini 2 as my main computer speaker for a while. It sounds a lot better with the front tipped up toward your ears, and I kept propping it up with whatever was on my desk. I finally had a few minutes to draw up a…
It's a simple holder mount for Bose Acoustimass speakers. You need an M5 bolts for install, and one for mount it on the speaker. You have to connect it on the speaker first. If the middle part moves a little, then just print a gasket and…
Ready straight out of the printer. It is a tight fit, so the first time assembling might require a little strength. I used PET-G for the print Let me know if there are issues
Simple four-piece hexagonal riser/stand for Bose Companion 2 Series III computer speakers. Post-Production Improvements I've found that the "organic" hex support is generally suitable to maintain structural integrity without additional…
The cushions on the Bose QuietComfort headphones weren't thick enough to prevent my ears from pushing up against the internals, leading to pain after a few hours of wear. These extensions provide a little more room to prevent that…
I designed this for my YESHOMY Height Adjustable Electric Standing Desk , the top measures 15.25mm thick. It lifts my Bose Companion 2 Series III speakers to be inline with my monitor, but mostly it just frees up a little visual desk…
After recently buying a Bose QuietComfort 2 earbuds . The only downside I found with them was (as lazy as it is) having to plug them in to charge them, as apposed to just placing them down on a wireless charging pad having to just use one…
If you removed your Bose tweeters from your Porsche Macan's dash (or Cayenne/Panamera) in order to install upgraded tweeters, then you likely had to remove most of the original mounting plate in the dash. Use this adapter to remount your…
The rubbery liner started fracturing after some years. I based this liner on https://www.printables.com/model/25945. This was a perfect fit using PETG on my Ender 3 V2 Printer.
Holder for BOSE Pro Flight headset (Bluetooth) with A320 engraved logo. Printing recommendation : Place cable cutout on the bed Manual supports added for overhangs 15% infill 3 walls rest is your choice, I use ironing for the topmost…
This is a replacement panel grill mount for my Bose 601 Series II Direct Reflecting Speaker. One of my speaker's original grill mounts broke cosmetically and so I modeled and 3D printed my own rather than shelling out $80 for a "new" one…
I recently purchased a Bose companion 5 as a replacement for my logitech Z625 and noticed an inconvenience right away. With how wide my monitor is there is no good way to position them to not just fire into the back of the monitor, which…
I flipped the apple watch charger to the opposite side, doubled up the phone holder and added @Charleszard's Bose Quiet Earbuds II charger. 25% infill (support cubic) Supports: snug, 0.2, concentric
3D model of a circular battery cover for a Bose remote control using a CR2032 coin cell battery. Designed as a replacement for the original lost or damaged part, it features a twist-lock mechanism with side tabs to ensure a secure and…
This is a stand for the Bose QuietComfort 35 headphones. It is composed of three pieces that are kept together by gravity and friction. If your printer is not well calibrated and the pieces are too loose, just add a drop of glue. No…
The Bose Companion 2 Series II are a great magnetically shielded speaker that can be had at a low price, making them a perfect companion for your PVM-14L5 monitor. Bob at RetroRGB has great information on the subject. These stands allow…
Soporte de Auriculare (BOSE) se puede poner con cinta de doble cara o atornillado (métrica 4). Tambien opcion sin letras
Bose Solo 5 - Wandhalter Optimal zur schönen Darstellung des Wohnzimmers. PLA Lochvorgabe führ Schrauben Optimal
suitable for holding the Bose Companion Series 2 speakers on your desktop. I printed at .15mm with no issues, with organic supports.
Printed without supports with 15 % infill 0.2mm layer PLA Unlike the original model, it does not contain holes for screws (I attached it with double sided tape)
Printed in petg with supports. Print vertical
Just a fast designed part to mount our BOSE soundbar directly under CHIQ TV which is mounted at the wall. I don't want to drill more holes into the wall so I decided to mount it directly under the television. Please print in PETG or…
Don't like anything standing on my desk, so I made these speaker mounts for a computer monitor I have added a straight and a recessed/angled version, I do use the recessed one so the front is flush to the monitor They are simply glued in…
Support de casque Bose. Support de casque en 3 parties. Support base, avec possibilité de mettre au dessous des antiglisse d'un diamètre de 8mm Support casque tube Support du haut. Les 3 parties s'assemble avec de la colle. Le rendu est…
UPDATE-07012021: I added a shorter "by 20mm" version of this remote holder as the full length holder made it too difficult "for me" to grasp and remove the remote. My wife hasn't complained of this problem, but then she doesn't have my…
2x2 - Gridfinity - Bose Quietcomfort 2 Holder. Includes a little finger notch to pull it out easier. Category: Other
When sailing, I listen to music through a waterproof Bose Soundlink Flex. I was tired of it moving all over the boat so I created an open-front box mount with drainage holes in the bottom to hold it. Printed in PETG. Mounted on the aft…
Made a simple holder for my Bose QuietComfort Earbuds in a project to organize some of the things I have around my office. Printed with PLA, 0% infill, 0 solid bottom layers. No raft or brim needed on my FlashForge.
I took Shinns' model and modified the front with a larger cutout for USB extension cables (rear is still the same). I purchased two Amazon Basics USB Extension cables here:…
