40 824 modeli
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…
UPDATE 12 November 2023: I've received a consistent handful of messages from people who have been downloading the wrong original files so I've reuploaded the correct lid/seal files here as well. UPDATE 13 July 2023: Added a version with…
A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…
Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…
Support me & Join Printables Club Assembly list of non-printed items for pencil case 2 pcs - metal axis 26( 25 )mm x 3mm 1 pcs - sharpener blade aprox. 6mm x 23mm with screw 2 pcs - M3 12 - 18mm screw If you looking for a bigger version
Administrador de cartuchos de juegos Playstation Based on https://www.thingiverse.com/thing:2993610
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
I wanted a slim case for my Geekcreit® ATmega328P Nano V3 (a copy of the Arduino Nano board you can find on Banggood). I also wanted a case for situations without pins, but an output cable directly soldered on the board : I did this one.…
I needed a game case holder for 14 PS4 cases but only found designs to hold 10/12 cases on here & Thingiverse. I didn't want to print multiples or consume the time/material required for existing case designs, so I made my own. This holder…
YubiKey 5C NFC Case/Keychain (USB C only) I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them. It is intended to use case cap as main holder of the key…
This is a simple earplugs case for travelling or just for storage. It prints in place without the need for supports or other mechanical operations after printing. It might close and open a bit harder at the beginning, but after a few…
This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…
If you like my design, I really appreciate if you can consider a coffee ☕ for me! ( LINK ) Version 2 released! Snaps on sides, slightly easier to open. Overview A business card stand for an exhibition booth or an event table. It folds and…
This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…
I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
I printed it from PLA with 0.4mm nozzle, 0.1mm layer height, probably works fine with PETG. I share the STEP file too, so feel free to modify it to your taste.
Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
I made this quick and easy USB Case to use and remix it into way more interresting Cases. I used this USB Sticks from Amazon because it is a widespread model and easy to take apart. I look forward to see your remixes and will add some…
A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
This is a mashup of two very cool systems. Additional Materials: 6 pcs - M3 x 6 mm bolts (or M3 x 4mm) 6 pcs - M3 x 8 mm bolts 14 pcs - 3 mm x 35 mm rod 2 pcs - 3 mm x 32 mm rod (for the bottom of the front latches 2 pcs - 3 mm x 25 mm rod
Print both the lid and the body. The ESP32-C6-DEVKIT-M-1 can be pressed in and should be held in by friction. The tolerances are designed for this purpose. I printed it on my Ender 3 with Prusament PLA Galaxy Black and 0.2mm Layer Height…
I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…
Introducing the Flipper Zero WiFi Developer Case, meticulously crafted for seamless assembly with just a click and snap mechanism—no screws needed. The design ensures an astonishingly precise fit, marrying functionality with elegance in a…
The case looks like a smiling mouth. Print Settings: Material: PLA, PETG Layer height: 0.15 - 0.20mm Supports: no Perimeters: 2 Download Gear wheel and Spring here: https://www.printables.com/model/231691-fidget-clicking-wheel-20 My Other…
Last Christmas, my brother gave me a package of No Mo' Skidz adult wipes. LIttle did he know that 3 months later, we would be facing The Great Toilet Paper Shortage of 2020. I designed this to provide comfort to those using our throne…
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Modular 19" Rack Case This modular rack case is the perfect solution for storing and organizing your musical gear. It can hold up to four independent modules (4U), and multiple cases can be stacked together and reinforced with steel…
I found this case for the jetson nano and I liked the pattern. The extra height required for the fan was something I did not need. As such, I made a similar model with the same pattern. The jetson nano pcb requires 2.5mm screws. As I only…
A simple and easy-to-print credit/business card case. It is made of 3 parts. Two bodies and one cap. I made one of bodies with using “add modifier” function of Prusaslicer 2.4.1.- 25%, honeycomb pattern of infill.
This version has a little wider USB-C opening as sometimes due to different seem setting, it could get quite narrow. Best fit is to print it on 0.2mm. Where 0.3mm gave the case too much wiggling space, and 0.1mm was a very tight fit…
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
I used a Pioneer MVH-180UB as a bench amplifier and designed this case for short DIN car radios (without CD). Powered it with an old PC PSU.
Based on ISO/IEC 7810 - ID-1 for perfect fit in your credit card wallet. Thickness 4mm.
I designed this mini-itx case for the 10 inch rack i printed. The tray and the frontpanel are modular so you can remix the frontpanel without printing the whole model again. The case will fit a mini-itx motherboard and 3 2.5" ssds/hdds. I…
My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…
Remixed from Sica's model. Hinges printed nice and stiff with PETG at 0.6mm. edit 2023-11-01: Added a variant with grippy bits on the sides, to make it easier to open.
Rasperry Pi 5 Case - Modular Snap Together This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks , originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4 . I've updated the design to make it fully…
An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…
I bought an Atorch DL24 to do some load testing on the mess of USB cables I have. I think it will also come in handy for other projects. It's a pretty nice piece of equipment, but I'd much prefer to keep my mitts off the PCBA. So this…
Simple case for the ESP32-2432S028 Cheap Yellow Display (CYD). Held together with four m3x10 pan head screws. No supports but you'll have to clear the 3mm screw holes in the back plate. Note that I've already adjusted the alignment of the…
Box designed to hold toothpicks with and without individual plastic casing. Easy access: you can shake out couple toothpicks through hole in lid. I also include a plain box without pattern and lid without hole. Build instructions Print in…
Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…
Snap-in enclosure for plain ESP32 DevKitV1, I have used this for ESPresense, ESPHome AirThings BLE, ESPHome Bluetooth Proxy ..
This is a case for the RD6006 variable voltage regulator. The design accounts for some ventilation holes and 4 points with which you can remove the RD6006 from the case. Unfortunately in my print the top part broke off. I printed only…
Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…
Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Having troubles to print the official case? Is your built volume to small? Just wanted something fancier? Try the Open MVS advanced case! Design goals of this case exact fit for the OMVS kit to consolize a Neo Geo MV1C printable on a…
A handy travel sized toothpick case/dispenser. Note: The optional cap may be printed in Vase mode, using an extrusion width of 0.8mm 2023-07-09: Added another version with a combination image & text. 2023-07-10: Uploaded some optimized…
Casette Tape Print Big. Add wall hang in back.
This is a case for the popular GM328A transistor tester. The case is able to be printed with no supports, and requires Four M3 socket head screws and four M3 square nuts to assemble. The circuit board is captured between the top and…
I had an old USB drive around with a broken mechanism in the case so I decided to print a new one. The openSCAD model is very configurable, so you can configure this for your USB drive, or whatever else. One possible improvement I would…
This case will hold your ESP32 Cam and make sure its ventilated. There is a ventilation hole in the front, and the back is open to let the heat escape. You can also take advantage of the open back to attach a heatsink. This case does not…
I created the case to have the module ("EBUS to WiFi adapter module" by Daniel Kucera) protected from dust. You may buy the module here: https://lectronz.com/products/54 In the correct orientation all the parts can be printed without…
This is a Case to fix the emergency button to a Simrig. The hole distance on the back is 40mm to fix it horizontal and vertical on 40XX aluminium profiles. You will need 2x t-nut for M6 Screw 2x M6 Screw 4x M3 Bass insert 4x M3 Screw If…
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
This is remix of Stamos fantastic Hifiberry Case . The original model was modified as follows dimensions were adjusted to IQaudio DAC Pro High-Fidelity-Audio-Output-HAT the case was extended in height to allow using the GPIO pins a hole…
A case for the 6 column corne keyboard, with various tent (4° to 12°) and tilt (-8° to +8°) angles, as well as a flat version. Tested to fit a v2.0 Cherry PCB (pictured), although I believe it should fit a v3.0. The pictures show the 8°…
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
I always lose track of my 18650 cells so I decided to design a case for them. This is my first major print on my i3 MK3S+, and my first print I've published online. I'm sure there are plenty of battery holders around but hopefully someone…
I really like the K6ARK morse code key, but I have managed to break a couple of them by carelessly storing them in my kits. This case prevents the paddles from being touched while stored. It is designed to hold the key in the case with a…
Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
A case for your Rii i6 / K06 Mini keyboard with an integrated USB dongle holder and phone stand! This version is reversible so you can put the mini-keyboard in either way!
A simple case created to hold the WOWStick and other bits and items. the magnets used are 6mm dia x 2mm from amazon. A piece of filament is used as the hinge mechanism.
Hello, Today I have for you a training knife case including a LARP/Airsoft knife . It contains 3 parts of the case that need to be glued or screwed. There is also a model of a compatible knife. For better printing, you need to cut it in…
This storage case doubles as a stand for a Waveshare 7inch Capacitive Touch Screen LCD . 4x M3 x 8 mm socket caps screws for the main case 6x M3 x 8 mm socket caps screws for the hinges 6x M3 nuts also for the hinges The 12 optional…
Case is for SHOKZ OpenRun Mini Headphones AfterShokz Aeropex Mini - Bone Conduction Model Number S803M UPC 850033806045 Non-Printed Parts: Less than 5" of 1/16" brass rod ~2" is kept straight and used for the hinge pin ~2" is bent and…
This mini protective case is specifically designed for the Nothing Phone (3a Pro) . It provides targeted protection for the camera module without compromising the phone’s unique design. Features: ✔ Discreet design or not that perfectly…
A simple box to store my dental guard. External dimensions: 76 x 64 x 24 mm Printed with 0.4 nozzle, 0.30 layer height.
This case has two options for storing the mouse. You can store the mouse with the cable wrapped up and contained within the case or you can have the wire outside the case as well. To support my projects and to get commercial use, use the…
Included in the attachments is the parametric Fusion 360 design and the label design
You need for each arm 5 M4x14mm nuts. It is recommended to use supports on plate only.
Hey guys, I designed this because my RaspberryPi3 got really hot in my enclosure, especially when printing materials that require high heat bed temperatures like ABS or ASA. Therefore, I placed the Pi outside the enclosure which gave me…
Opens sideways when the nut is not tightened and the nut stays attached (and will not get lost) even when unlocked. Lets you open your bag with ease using two hands while at the same time making it more difficult for pick-pocketers to…
Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN Use the screws provided in the fan package to mount the fan on the Rpi Support. Use M2.5 screws to fix the Rpi on his support *Gaps in front of the fan section could be use to…
Universal case box for electronics with grommet
I adapted the grip to fit the protective case of my Paperwhite 7 (inner length 174mm), as well as my fingers (19mm gap). Made the ends of the frame very thin so that I can still fully close the lid of the case. I cut the grip into two…
Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…
A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…
I really love the original design by Drip, especially the minimalistic design, but I personally want my 18650s to be protected slightly better. Thanks @Drip, big fan of your channel! So this is pretty much the same design, just a bit…
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
Finally decided that the LCR-T4 meter rolling around on my desk needed a case. Wanted a "toolless" case, so here it is. I used this switch from jaycar: ultra-mini-rocker-switch . Model is based on this case by Phenomen however this is a…
This case and keyplate are for the Cantor MX keyboard, and only with MX switches. (Specifically not the Cantor Classic, and not for the Cantor MX using Choc switches). The Cantor MX can use 3-pin or 5-pin MX switches. The 3-pin switches…
Remixed From: https://www.printables.com/model/277099-mini-super-toggly-fidget-button-v2 I used a bit of glue to hold in the hexagons on mine.
For this board 50K-200MHz Malachite SDR Radio Malahit SDR HAM Receiver with 3.5 inch LCD New pinshui - Walmart.com
This is a special travel box for Gillette Fusion 5. The box uses a filament hinge, after assembling slide in a bit of 1.75 mm filament and the hinge will work. The box also features a battery holder since the model of shaver is electric.
I liked @Nebbish's DCC-EX case, but it didn't fit my hardware, since I'm using the EX-Motorshield8874, not the Arduino Motorshield. This adjusts the side ports to fit the 8874. I also found the fit of the microcontroller a bit too loose…
![Business Card Case Holder & Stand [& Credit Card too!] (print-in-place, no support)](https://media.printables.com/media/prints/846c1284-c782-4628-b4ad-1f2f17dfd173/images/11630392_08724ebf-b08e-42b6-a261-58a1bf8a7450_f93918e8-9f3f-411a-b996-adeb883684e5/version-2.jpg)
