62 modeli
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
Printed with standard Voron settings: Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill percentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic Wall count: 4 Solid top/bottom layers: 5 Supports: NONE
Voron CHAOTICLAB CNC TAP endstop X EXTENDER Arm for PCB Endstop Additional material: Threaded Insert M2 dia 3,6mm, height 4mm M2x6 SHCS screw Insert the screw from the front into the lower oval hole in the cnc tap, mount the extension…
There was nothing included with Chaoticlab's CNC Voron Tap V2 to trigger the X-endstop PCB included with the LDO build, so i made one. It can be mounted with the same screws to mount a endstop switch on the included bracket. I printed…
Adapter to securely mount the v8 Dragon Burner to the Chaoticlab CNC Tap for Voron 2.4/Trident. The CNC tap is fairly tall compared to the Dragon Burner. You may need a taller extruder to clear it. I'm using a modified Wristwatch G2…
This is a paddle designed for the Choatic Labz V2 CNC TAP when being used on an LDO based kit or similar Voron V2.4 etc… Print face down, no supports, 4 perimeter walls, 5 top and bottom layers with 40% infill (Voron PIF perameters).
I was having issues with QGL failing sometimes with the original BTT mount that attached the Eddy Duo to the Voron Tap. This change fixed it for me and may help someone else. It prints quickly so is easy to try out. I moved the eddy…
I got myself a Voron CNC TAP from Chaoticlab and i saw that you need to put the X endstop on the TAP itself, but i have PCB for my X/Y endstops so i modeld something up quick and tought to share it here as someone may have the same…
Update 05.06.2025 I changed my hotend to a Rapido Ace, which is the shorter HF Version. So I had to modifiy the mount for it. I designed shorter version which has to be used with my modified BTT Slim Case…
The STL file only contains one piece, which you need to print twice. The octahedral chamber inside has 6 vertices, and so causes the ball only to land on one of 6 “sides” when a weight/ball bearing is added inside! If you want, you can…
I used it to slide the carriage block of the MGN7 linear rail for cleaning and lubrication without losing any beads. In my particular case, I used it on the Chaoticlabs Voron Tab V2, but it should work on any MGN7 rail. There is a stop at…
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
I really wanted to the use the extra Chaotic Lab CNC Tap V2 I had kicking around, but couldn't find a good way to adapt the AntHead to this carriage. I found the original model which somewhat worked, but there were areas that clashed with…
you will need two classic pins to assemble. put them into the holes and glue them with superglue on the side without the cap. than glue the whole thing on the pedestal. .I printed it without any rafts or supports with 15% infill and with…
I made this because my cat grew bored of predictable balls and needed something more stimulating. This ball rolls in unpredicatble ways and rattles. My cat really liked it! You need to pause the print to place the bearing inside. This…
modified for 3mm of extra clearence and mantaining same printing orentation
just added a extra cutout for revo voron. the metal bracket that guide the cables was getting in the way and to just make it easier I made a extra cutout for it.
Assembly: Be sure to fully insert the 2 heat set inserts from the back. They should be recessed into the part a few mm before bottoming out. Place 2 M3 FHCS in the lower mounting holes of adapter (leave hanging in place) Attach to CL Tap…
A mounting plate to allow the chaotic lab cnc tap to bolt to the dragonburner v8 tool head
Cartographer/Beacon Probe Mount for Rapido UHF for Voron CNC/CL Tap, XOL2 Toolhead
I redesigned the tool to use the stock Hiwin linear rail and secure it with 2x M2 screws when replacing with new setup to eliminate the play from initial Hiwin design. I went with the HoneyBadger MGN7H setup from Fabreeko.
Voroni Chaotic Penholder Hey maker! 👋 I started with a chaotic vase and modified it to apply a Voronoi pattern – the result looks pretty awesome! 😄 Features: Unique chaotic Voronoi design for your desk or workspace. Perfect for holding…
Work in progress - I haven't tried printing this just yet and it is missing some parts! Also, this is my first large model so I'm not sure if the cuts for will work. This is meant as a proxy for a Battlefleet Gothic ship. It's a part…
A mount for the Fly SB2040 v3 Pro LDC1612 sensor for the Chaotic CNC Tap As Klipper currently doesn't support endstops via Eddy.
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
Part designed to fix problem with hinges ears being to short. You will need typical voron sized heat inserts
This is for everyone who uses the Chaoticlabs CNC Tap v2 in combination with the CNC XY Joints from them.
This mod enables a double shear, top bearing motor support for the AB motors specifically for the Chaotic labs CNC kit. It is a remix of the excellent work done by Vitali and adapted for precise fitment on the CL CNC kit. Print settings:…
https://youtube.com/shorts/il82DxLyXd0?feature=share It is intended for ferrite magnets with a diameter of 20 mm. The tolerances are quite large so that the magnets can be easily removed.
UPDATE 11.05.2025 - Added support for Rapido UHF hotend. Minor fixes for part-cooling. I wanted a toolhead for CNC TAPv2 that also supports big hotend, has CPAP cooling and has clear access and visibility to the nozzle and hotend for…
These counters are for keeping track of how many Mugic spells your creature has left in a game of Chaotic. I printed these out of Translucent filament so that they look like they do in the TV show when a spell is cast. If you don't have…
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
I modified the BTT Eddy slim Shell, to better fit it on a Chaoticlab Tap V2. It replaces the original case. shortened the case made it slimmer added supports for the bottom board of the eddy removed the pocket for the screw heads You can…
Modified Dragon Burner & Sherpa Mini for Chaotic Lab Voron 2.4 CNC Tap. Changed bolt spacing and mounting methods to fit the Tap, take up as little space as possible and be as light as possible. Hotend used in the project:…
V1.0 1.5 mm safety clearance from the XY idlers during tool change. 3.5 mm if the toolholder protrudes beyond the frame. (Fridge Door or DoorBuffer) Hardware List: 1x 1515 Extrusion 375mm (350 Voron) / 325mm (300 Voron) 8x Heat Inserts M3…
This is an Aizawa chaotic attractor, estimated to 0.01 step resolution and plotted as 25,000 coordinate points in three-dimensional space. These coordinate points were then converted into a 3d model in OpenSCAD using overlapping cubes,…
its 5 five part fully printable fidget toy. I printed the top of the inner part with 100% infill. This can be done in Cura by: creating a support blocker on the front 2. making it larger to increase the volume 3. in "per model settings" →…
A drop in replacement for the included cable gland mount supplied with this kit . Same print settings as PUG apply. Requires 2 (or 4) self tapping M2 screws of at least 5mm.
The X endstop mounted on the CNC Tap v1 from ChaoticLab partially misses the right X/Y joint and makes unreliable contact. This extends the block downwards and can be installed with the belts already on. Afaik this works with the v1 of…
I bought the "high quality" ChaoticLab CNC Door Mounting Kit for Voron 2.4 for a lot of money, but it did not fit into the recommended standard original Misumi 2020 Profiles for Voron printers. The profile is 1mm deeper than what the…
Wikipedia Article: https://en.wikipedia.org/wiki/Malkus_waterwheel Youtube : https://youtube.com/shorts/1jZm7up250I?feature=share Bill of Materials: M5 x 16 x 1 ( Works as a pivot between axle and base) M2 x 16 x 1 ( Used to set angle…
Dragon Burner V8 – Raised Orbiter V2.0 Mount This is a modified upper mount for the Dragon Burner V8 toolhead, designed for use with the LDO Orbiter V2.0 extruder and Chaoticlab CNC TAP V2. With the standard Dragon Burner V8 mount, the…
Replacement Voron z_joint_upper_x4.stl part I DIDN'T MAKE THIS – This site won't let me post this as a remix of: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Gantry/Z_Joints/z_joint_upper_x4.stl…
Unleash chaos on your desk with this incredibly detailed 3D printable statue that captures pure rebellious energy in stunning detail! This dynamic figurine showcases flowing hair, intricate clothing details, and a powerful stance that…
3 layers Top/Bottom: 6 layers Infill: 40% 6 pcs M3 heat insert
No need to cut or solder the 1m usb/can cable supplied with the newer Bigtreetech SB2209 CAN/USB versions, use this instead of the original pg7 mount. To stabilize the cable, you can use a 0.8mm diameter steel spring wire. The BTT SB2209…
Unleash pure chaos on your desk with this stunning 3D printable statue that captures Jinx's wild energy in incredible detail! This meticulously crafted STL model showcases the beloved League of Legends champion wielding her iconic rocket…
You need Glue. The bearings (608) are from https://www.printables.com/@Jerryie: https://www.printables.com/model/583731-print-in-place-ball-bearings
This Chaotic Pendulum Hand Spinner is a compact, hand-held physics toy that demonstrates chaotic motion in an intuitive and playful way. By combining rotational motion with an offset pendulum mass, the spinner produces complex,…
A simple Endstop Bracket for Dragonburner with Chaoticlabs CNC Kit.
Other Z Chain Transpose Mods mount to the traditional rear aluminum extrusion which Chaoticlab Carbon Fiber gantries do not have, of course. Here are Loogle's gantry mounts for both 15mm Generic and iGUS XY chains, plus Michael Browne's…
I am currently using a XOL toolhead with Chaotic lab TAP v2. The mount for the Eddy mount from the BTT github is out of the recommended height difference (2-3mm) between the nozzle tip and scanning surface of Eddy because i am using a…
These ChaoticLab hinges did not fitted well to my extrusion profile, it kind twisted the door leaving a huge gap from the door to the extrusion. This model will replace the M3 T-nut to a M3 brass heat insert (3x4x5mm). Use ABS or ASA…
Poop Plow for my toolhead and AFC/Box Turtle setup. I didn't want my 'poops' from my AFC Poop macro sticking to the nozzle so I made this. It mounts to the back of the Chaotic Labs CNC TAP via friction mount. The holes are just big enough…
UPDATE 11.05.2025 - Added support for Rapido UHF hotend. Minor fixes for part-cooling. I wanted a toolhead for CNC TAPv2 that also supports big hotend, has CPAP cooling and has clear access and visibility to the nozzle and hotend for…
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
This Chaotic Pendulum Hand Spinner is a compact, hand-held physics toy that demonstrates chaotic motion in an intuitive and playful way. By combining rotational motion with an offset pendulum mass, the spinner produces complex,…
Poop Plow for my toolhead and AFC/Box Turtle setup. I didn't want my 'poops' from my AFC Poop macro sticking to the nozzle so I made this. It mounts to the back of the Chaotic Labs CNC TAP via friction mount. The holes are just big enough…
V1.0 1.5 mm safety clearance from the XY idlers during tool change. 3.5 mm if the toolholder protrudes beyond the frame. (Fridge Door or DoorBuffer) Hardware List: 1x 1515 Extrusion 375mm (350 Voron) / 325mm (300 Voron) 8x Heat Inserts M3…
I'm building a Voron 2.4 R2 and purchased the CHAOTICLAB CNC Tool-free XY-Axis Tensioner for Voron 2.4 , which is a nicely made part (milled from aluminum) with a knob to adjust the tension of the XY belts. Mine did not ship with any belt…
A project to "Open" the Makerbot Method and Method X by replacing "closed" parts like Extruder and Mainboards to available 3rd party parts and Open and free Software like Mainsail. This part is a carriage to be able to mount the Chaotic…
