880 modeli
My existing small bin for the rear of my X1 Carbon would fill up and either overflow or back up into the printer. What I wanted is a waste chute to move all purge material to the front of the printer that worked with the anti-vibration…
A Cooling fan replacement chute because the original does not fit anymore if the hot end is replaced with a Revo six.
I needed to use my Dronavia Kronos MV3 parachute on multiple drone so remade the holder from the original provided with the kit Printed in Prusa PETG Carbon I strongly advise printing sideways with supports. You do not want supports in…
At a famous discounter I saw a useless plastic container for pommes and I wanted to test whether I could minimize the plastic used when sketching it for a 3D printer (without actually printing it). My version would cost about 1.51 Euro…
God that name's a handful. Basically this is a part you can fiction fit or glue into the chute of your automatic feeder! It fit's this model https://www.amazon.de/-/en/gp/product/B08V4XRFQ2/ (If Amazon didn't sneakily update the sold…
Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…
A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…
I included the exported files, stl, and printed images. I printed this with 10% infill and 2 walls. .20mm layer height. It uses 380.33 grams of filament with .28mm layer height at 10% infill and takes roughly 8h50mins to print on standard…
A simple and effective poop chute / ramp and bucket solution for the Flashforge AD5X as seen in my review video here: There are two files in this listing - the first is a 3MF configured for the Bambu Lab A1 and if you use the drop down to…
With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m
The AD5X Super Duper Pooper Chute collection (see the edit from 12-21 below for additional detail) This poop chute is my homage to the one FlashForge has on their site. It attaches to the pooper using the existing screws. It fits with or…
13.02.2024 - Update: I added another magnet cap file for magnets with 10mm diameter that " Robert Hidasi " created and kindly provided to download. 23.09.2023 - Update: I added the magnet cap file that fireant designed and kindly sent to…
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
This is a poop chute for the K2 Plus that I've designed. It attaches with the two screws on either side of the waste chute. There's also an additional retainer bracket that utilizes (2) of the rear panel screws and it supports the end of…
Current Version (v3) Notes: Changed default model orientation on slicer import to reduce confusion and broken snap fits This model was designed to help reduce instances of purge waste being flung back into the print area. The models I…
I just received the newest Flashforge AD5X multicolor printer and I needed something to redirect the poop chute since the back of the printer is hardly accessible. I tried to design something that bolt on the frame but it was hard to get…
Poop chute for the Centauri Carbon. The model does not require supports when printing. This poop shoot does not need to be screwed into the back of the machine, so can be easily removed to empty out the tray.
Garbage container for bambulab, using 6 neodymium magnets 8x2mm. The magnets must be installed using glue. Installation is made easier with positioning tabs.
This is a lightweight, strong basket that prints in just over 1 hour. The design helps with catching purged material when it drops off the wrong end of the wiper.
See the update below… This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design. The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The…
This is a remix of the great design of Bambu Poop Chute by Fantasy3DPrintsShop Uses 6x3mm magnets to attach the chute to the back of the X1C, P1P or P1S case. No supports are required. I printed using these settings: 0.4mm nozzle 2 layer…
2mm thickness 330g with 0.2mm layer and tree support narrower≈290g for narrower one, I strongly recommend to use support enforcer as shown in picture I uploaded
Features Left-side mounting Steep angle to prevent filament poop from getting stuck Matching bin that fits under the chute Easy installation with no printer modifications required, uses existing screws and screw holes
Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…
Update Apr 23 '23: Pre a request, added a flipped and longer model to send poop to the right side. The angles won't be quite right as the power cord will get in the way but it should be good enough. I also left it with no back side…
A poop chute for the K2 Plus for those of us with rear access to the printer. Included a little basket because my wife wanted her Christmas container back. Designed to be printed without supports and using the standard screws that are…
This is a clip-on poop chute/bucket for the QIDI Q2 , designed to collect purge material neatly without any screws or permanent modifications. UPDATED Small Version (RECOMMENDED PRINT) : Added Chamfers to improve Printability Added Holes…
This model does require 2 10mm magnets to standup properly. I used 2mm thick magnets and they do sit flush now. If you opt to go no magnets then I'd recommend using tree supports with 0 interface layers. This is a quick and easy way to…
Update 2: I wanted to make a slightly different collecting tray and connect it to the segments. I succeeded, but it was difficult to connect it to the segments. Which is actually logical, because the container brings a stiffness to the…
This is my poop chute design for the AD5X so you can still have access to the power cable and lan connection. I printed the slide standing up with tree supports on build plate only. The basket i printed with normal supports on build plate…
Extension for the top of the poop chute door to help with filament not getting stuck on the top of the door. it just pushes on top of the door , flat side to the front. I was always having problems with the long oozed strand of filament…
A simple back hanging waste system for the Centauri Carbon 2. It uses the existing screws to secure it to the machine. It slides off and on easily, and holds a large amount of poop for those long jobs. I could've cut down on the amount of…
Filament purge collector - with 2 holes to install 6x2 magnets compatible with P1P, P1S and X1 Carbon
Discarded filament collector container for Bambu printers. Remix of a great design by Fran Gaur. Far less pretty but prints 2.5 times faster due to simpler geometry. 0.8 wall thickness.
After hours of searching, I was not happy with form or function of other available “poop chute” models. The Bambulab printers are beautiful, and I did not want to attach something to it that did not look like it belonged. So, I made the…
This model use original screw. I have first batch of flashforge ad5x so mine don't have screw so I use double side tape to fixe it on my printer
You need 6 magnets in the size 6x3mm I printed it in PETG and it works great. when you like it please like it :)
Made a poop chute collection bin that fits over the power cord and still hold a decent amount of printer poop.
simple poop chute for the ad5x. prints without supports. included .3mf,s for the ad5x, and 2 for bambu p1s Update - just added the enclosure for my ad5x and the chute still works fine
The Poop Chute Bucket is a practical design meant to catch filament waste during printing preparations. It's designed to attach to the lower screw of your printer's chute and includes a removable bucket for easy waste disposal. I kept it…
A much needed poop chute for the Anycubic Kobra S1 Combo. Vented at the outlet and chassis fan to avoid blockages. Screws into the machine with the original screws. With removable collection bin.
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
V2: Redesigned in FreeCAD Updated geometry is now cleaner thanks to a complete remodel in FreeCAD. A STEP file now available to allow for a smoother and faster print V1: Designed in Blender. Bambu Labs matte grey PLA was used in this…
See the update below… This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a medium sized container. A larger version will be coming soon. The poop chute uses a single magnet (0.5 inch diameter,…
Purge Chute Extension This model was created with the aim of minimizing the occurrence of purge waste being ejected back into the printing area. BENEFITS: Fast to print Easy to use Small & Strong Designed for FDM Printing Smooth Operation
It's designed to work with the screws from the sidemounted spoolholder as well as the screws on either side of the exit hole of the printer. Also it's printable with the K2 itself. You can print and glue on an extension for the slide if…
Tired to print almost half a kilo of plastic for a box? This is the answer! :) At the moment this IS the most lightweight (in both weight and printing time) poop chute I am aware about. The walls are thin - 1.2mm in order to be perfectly…
A bucket to catch purged filament from the waste chute of Bambu Lab printers such as the X1 Carbon (X1C), P1S, and P1P. Features: Large volume to collect purged filament Low material usage compared to similar designs Less than 2 hour…
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
This is a simple poop chute designed for the rear poop discharge port of the Flashforge AD5X. It can be printed using the AD5X without additional supports. Please cut the anti-warping disk after printing. Two 19mm magnets are used for…
V1.1: much smaller back panel cleaner model PRINT WITH ARACHNE (Orca Slicer: Quality → Wall generator → Arachne). Otherwise the thin support connectors may not print at all. ----------------------------------------------- This is a…
A garbage bin for the P1P and X1 printers that funnel the ejected filament to the from of the machine. This way you don't need to reach around to the back of the machine to empty the bin or check if it is full. Model prints in 3 pieces…
Requirements This is a ,light weight and quick to print, “Poop Chute” that requires NO post processing. It's attached with the screw that is already on the machine, so the only thing you need is an allen wrench . Print Settings You can…
Attaches to the back side of the K2 machine using existing screws. Allows you to collect the waste in a bin on the side of the machine. ***UPDATE 5.15.2026*** Added LH Extension
Remix uses existing screws. Poop Chute for the Centauri Carbon. The model does not require supports when printing.
Many of the poop chutes and garbage bins I see are overly complex, difficult to print, or use a lot of material. Mine is definitely easy to print and uses a lot less material than many of the others while still being tough. It can be…
This Poop Chute has been designed to capture the waste from the Bambu Labs P1 and X1 series printers. It is a remix from Fantasy3DPrintsShop This remix has a number of updates from the original version, these are all fully detailed below.…
Overview A purge chute for the Centauri Carbon that uses the original back panel fixings to secure in place, meaning all you have to do is print and fit! The chute has a tab on the bottom to stop the pot from being pushed too far. I…
Quick and easy poop basket for Bambu Lab P1P, P1S, X1. Big enough to pick up poop, but small enough to not touch your filament spool. Just place it behind the printer, you don't need any magnets or screws! Dimensions: 80mm x 55mm x 170mm…
I wanted to make the best poop chute bucket for bambu labs printers that I could, so here it is. This bucket has the same rounded corners as the printer and has a low profile so it doesn't stand out. It also has the same width as the…
Poop Chute for Qidi Max 4 with detectable bucket. 2 Versions, one that uses the current screws to help attach to the back of the machine, and one version that does not use any screws. All new based on features from all my favorite designs…
I had the problem that I occationally get poop ending up back on the build plate and the chute clogging from filament cought by the flap. Looking around for possible solutions I came across two models: @z3d's Purge Chute Extention…
This is a remix of the great design by DaveRig of his “garbage chute” but we all know it's a poop chute. Changes I made: made bin deeper to fit BambuLab X1C / P1P when sitting on a paver (1.75" higher) Added a kind of ramp inside the bin…
There's a big gap between the poop chute and the interior volume wall. If you look from the side, you can directly see the electronics, meaning that hot air from the printing volume will go to the electronics and also cooling air from the…
Creality K2 Plus - bin Right position This chute model is for the Creality K2 Plus printers. The chute is designed so that it does not interfere with the normal operation of the fans that are located on the back of the printer. It is…
Creality K2 Plus - bin Left position This chute model is for the Creality K2 Plus printers. The chute is designed so that it does not interfere with the normal operation of the fans that are located on the back of the printer. It is…
Water chute for Breville Barista Express / Express Impress espresso machines. This sits on top of the machine and allows easy access to fill the rear water tank. Works great if your machine is under a cabinet. VERY very new to 3D modeling…
Optimized Magnetic Print-in-Place Poop Chute for X1C, P1P, P1S Printers It is designed to be easily printable, provide well balanced storage capacity, while also respecting the bambu 256x256y256z printer build volumes. Features:…
Poop Chute: The chute will print on the Kobra S1 build plate diagonally with some rotating. I've added a 3mf file with the print oriented already. Update: I've created a “5cm” version that is deeper than the original (3cm). Sometimes,…
Magnetically-attached poop chute. 6x2mm magnets by default Configurable – for width/height and type of the magnets, see OnShape model below Option to mount with a screw that already exists under the poop hole Prints without supports (on…
This allows you to direct the filament “poops” to a box or container that could be on a shelf below. The pieces are friction fit and just need a little glue. because the male and female ends are square you can use the bends in all 4…
Loved the original design. I have a very small workspace and I cannot reach around or behind the printer so I made the bucket thinner and added a cutaway at the front so I can remove poops.
This set provides a great way to remove waste poop and chamber emissions from your shiny new Creality K2 printer. The set includes the following models: The main single part “Y” piece which connects to the twin exhaust outlets using a…
A 1 piece chute needing no supports for the Bambu Lab printers
A Bambu Lab poop chute that requires no magnets. 2 part design. The holder and the bucket. Replace the plastic screw on the factory poop chute door with an m3x10 screw and do not over tighten. Enjoy.
Waste / Poop chute for the BambuLab X1 Carbon. Used different wall thicknesses to help with prints times. Below slicer times are based of of using a x1c with a .24mm layer thickness. .8mm wall - 3hr 15min 1.2mm wall - 4hr 14min 1.5mm wall…
This poop chute does not require any exact magnets or anything like that but all the items you need should be in your stock if you own a bambulabs printer. REVISON 1.1 FILES NOW AVAILABLE (25th oct 2023) check following change-log and…
The original design was screwed onto the back of the printer. I wanted a magnet mount in case I needed to clean. This design uses (4) 6mm x 2.5mm magnets. This should fit all current Bambu machines, I have tested on X1C and P1P. 2023/8/10…
Because of the constraints of my confined workspace, I reimagined the bucket, giving it a sleeker profile and adding a front cutout. This innovation facilitates a seamless descent of expelled filament into the bucket through a chute. The…
Wall thickness is 2.25mm. I run a 0.6mm nozzle with a 0.75mm extrusion width, so it worked out to three passes on my setup.
I edited the depth of the chute attachment on the back of the printer and lengthened the chute and foot cradle so everything fits with the enclosure. It functions as it was originally designed with good clearance. Note: Alterations were…
Wanted something that holds more poo and that your hand can fit in to get it out without dumping it. No supports are needed
For a pre sliced version visit the makerworld version. Copy the following onto the end of regular link to find it - models/17484#profileId-16249 Screw on poop chute designed for P1P and P1S (unsure but probably works with X1). Uses a…
Hey there, hi there! Easier to remove waste bucket! Prints in one go around on the X1, I used tree supports for a clean print. Update 10/11/2023 - Added a Chute cover as requested. And a bonus super chute lid! (anti-Cat attempt)
PLA Printed With automatic support 0.20mm Standard @BBL X1C 15% Gyroid infill
This is a flapper style door for the purge chute. It allows for poops to fall out and then drops back down to help seal in unpleasant odors / particles depending on what filament is being used. It uses a piece of filament as the hinge and…
Small magnetic bin for Bambu printer poop chutes. Uses four 6mm x 2mm round magnets press-fit.
I explored many of the other designs out there and generally wasn't satisfied with what I found for my application. I wanted something that brought the filament purge waste closer to the front of the printer, while minimizing the side…
A screw on Poop Chute Cover for the Bambu Lab P1P/X1. Can be screwed on with a 12mm M3 screw above the Poop chute. Just remove the Screw that's already there and screw on the Cover. The Bambu Lab logo can be printed in a second color no…
I have my X1 Carbon on a IKEA KALLAX Shelving unit that is 5 cm from the wall. When the printer poops it drops it in between the wall and the KALLAX. The poop then bounces into a large container Underneath the printer. The Bambu Long Drop…
After searching for a poop chute for the Anycubic Kobra S1 Combo, i decided to make my own with all the good inspirations i saw. It is slightly over-engineered. You can remove the container by lifting it up. You need no magnets. The wall…
Waste (Poop) chute for the K2 Pro. My first creation as beginner. Couldn't find any for the new K2 Pro so had to design my own and this is what I came up with. I printed this in PETG with generic Creality settings and profiles, using Tree…
Two versions : Redirects CFS purge (“poop”) to the front of the K2 PRO for easy clean-up. Tight mechanical slack by design; a light sandpaper pass may be needed. Default right-side install; mirror in slicer for left. Thermal & airflow…
Remix of: https://www.printables.com/de/model/357927-poop-chute-large-magnetic-for-bambu-lab-x1-carbon Changes: remove Logo remove original holes add 4 holes for 8x3 magnetics
Basic slimline purge chute to be fitted using the original screws under the purge opening.
Hi everyone, I've created this two-piece poop chute for all K1 models. It fits on the back spool holder, but first, you’ll need to modify the holder a bit. Basically, you have to sand or machine the supporting wall down until it's…
Made it larger, added a cutout for the air vent holes on the X1E, added an embossed logo. Bambu Lab X1E 0.4 Nozzle Textured PEI Plate Bambu PETG Basic 0.20mm Strength @BBL X1C No Supports No Brim
Poop chute purge collector what ever you want to call it. This is for the kobra s1 by anycubic. Can be installed using the existing screws in the back of the printer and comes with a removable waste collector so you don't have to scoop…
This has been designed to be used in combination with a poop chute (i recommend this one): https://www.printables.com/model/935600-anycubic-kobra-3-filament-poop-diverter-anycubic-k When trying other poop chutes I found that when the…
