62 modeli
Replacement cog for Vectra C and some Saab 93 recirculation units where the small white cog has lost teeth. Where there is a clicking noise from the servo/motor unit one or both of the white cogs may have lost teeth. The larger one can be…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
I wanted to create a circulation pump out of an air pump. The propeller spins and creates a small amount of horizontal force. Unfortunately due to limitations with air bubbles it does not spin fast enough to replace a true circulation…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Update - V2 One of the expected benefits of this approach, from keeping the fan on the outside of the case, should be the life of the fan. Only the impeller is constantly subjected to the set 70°C. The electronics in the fan should be at…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Internal recirculation air filtration duct for AD5X. This model use the same 24V 5015 fan/blower model as the one found on the toolhead with 4 wires. This allows PWM capability and interchangeability. The mod help reduce fumes and…
Printing Supports required for bracket portion of “Duct” part. Other parts should be good with no supports anywhere. BOM - Magnets 6х3 mm - 19 pcs - “Voron” heated inserts (M3, outer D 5, length 4) - 5 pcs - M3х10 screws - 4 pcs -…
This AD5X recirculation duct and blower fan, A thank you to Jwidess for this design This is designed to be printed with PETG because of chamber heat, you won't need abs or asa because the chamber heat won't get that high. PETG can handle…
First I have to give credit to Synthetic Electron 3D for the original concept and design. He really did most of the work! This mod re-uses the stock 'auxiliary' cooling fan, blowing through the flat horizontal blower in the rear of the…
About air recirculation mod Keeps recirculating air inside the chamber. Reduces noise significantly. Better print quality* First off I want to thank Synthetic Electron 3D for the original idea and Robert Samples for the CAD model that I…
barrière de circulation pour diorama 1/64 grosseur hot wheels aucun support nécessaire lors de l'impression
-Added a version with a 5.5mm deeper filter compartment in order to add active carbon filters -Added seals holder -Added two 'less supports' versions with the middle strip removed, the filters are supported by a thicker lip. Many thanks…
You need to cut of the little grid on the original nozzle and make the hole bit bigger. Use tree supports please, sizes are in the pictures.
Removed the blade guard from the model for less air resistance, adjusted the thickness of the duct a tiny bit to avoid crashing and belt rubbing. You can use the stock phillips screws for the faceplate or you can use these M3 x 14MM…
Many 3d printers have aux fan that can be used to recirculate the air inside the chamber, which is very useful when printing in ABS/ASA. Elegoo Centauri Carbon has a side/auxilary fan but it takes the air from the outside the chamber.…
This is just a little remix of the original . Instead of glueing you can attach the two clips by using an M3 screw.
Fan mount for Recirculation ducting designed to use same 5015 fan as the toolhead. CHANGES: Opened up the port for Fan exit to fit wider fan. Removed countersink as there is room for Button head screws under this body. Elongated mounting…
Altered a Design already available on Printables to avoid the need of reorienting the stock Mother Board Fan
Designed around Dometic RV fridge cooling fins and an Arctic F8 80mm 12v fan. The fan is supposed to improve cooling efficiency of the unit by circulating air across the fins. I attached mine on the opposite side from the internal light…
My m5 pro had some crooked internal channel, that wasn't really airtight. So i asked the creator of this model to upload the step file, but after waiting for some time i decided to reverse engineer my own. With some tweaks for better…
I wanted to put my Apple TV directly on top of my AV receiver. But since the receiver vents the hot air from the top and the Apple TVs air vent is on the bottom I didn't want to place them directly on top of each other. This is my first…
This is a replacement bushing for the circulation pump motor found in some models of Whirlpool and Kenmore dishwashers. Problem After just under two years of operation, our Whirlpool Gold Series dishwasher started exhibiting problems,…
the missing files can be found in the original model
I created this Bitaxe extension to avoid warm air recycling, Thus pulling in fresher air and not the warm air which just left the Bitaxe.. I hope that my work can be useful for you! Gtreetzz PS: You need to be a bit careful when screwing…
Heavily inspired by the BentoBox recirculation filter , the BentoRoll is a recirculation filter for the Prusa CORE One. The normal BentoBox won't fit without removing a side metal panel. Instead, this design replaces one of the side…
Goes together more or less the same as V1 but now takes 5015 blowers and has less pieces to /print. 2x 50150 blower fans acid free carbon 2x m3 heatsink message me if you want the multicolor model Join the discord 9/10 EDIT : redesigned a…
This simple support raises the lid of the QIDI Q1 Pro 3D printer by 7mm or 15mm , enhancing air circulation when printing PLA or TPU . It helps maintain a stable environment while also reducing dust accumulation on the print bed and rails…
Remix of @Nicorn_574492 file https://www.printables.com/model/907645-ouglesauce-voc-carbon-circulation-filter-for-creal/files Changes based on suggestions by @tbkMAKER : Duct: Widened the rear mounting hole. Re-sized the side mounting…
Since pool skimmers rely heavily on the circulation of the water in the pool, I made this jet nozzle replacement that allows you to make the jet shoot at a 90 degree angle since regular jets can only shoot about 30 degrees off. The whole…
cone de circulation pour diorama 1/64
This is a holder for 2x 140 mm Fan, stick it under radiator to speed up hot air distribution. The model is symmetrical and snap fit. Using 4x pegs to mate the two halves… once joined I had hard time to split it again without breaking it.…
This is a spare part for a Grundfos Alpha+, a circulation pump which is not produced any more, but it could be that it fits to other pumps of this manufacturer, too. I don't know how long it will do the job, but at least as long as it…
Use in conjunction with Internal Circulation mod: https://www.printables.com/model/1473971-ad5x-internal-circulation-air-filtration-duct-with And additionally I made it for use with the Hygrometer/Temp cover with holes:…
*** V2 out now!*** 9/17: Carbon chamber got the same treatment as v2 which seems to work better. Will fit existing fan housing and face Carbon Filter/Recirculation Fan for Infimech TX. Photos show install. Could be mirrored to run two on…
This air scrubber housing is designed to manage fumes and improve chamber heating, originally tailored for the SV08 but compatible with most printers that have the space for it. Its ultra-low profile design ensures it fits seamlessly into…
Recirculation and continuous filtration Upgrades for the Centauri Carbon (CC1) 10 decibel reduction while the lid is on with all fan at 100% HEPA filter tray from the filtration kit by Uncle Jessy's model (had it on hand already) 2 Walls…
I found the open-loop air filtration and ventilation system inefficient and energy-wasting. Therefore I redesigned the air filtration system for my Voron2.4 350. These modifications and upgrades include two 6*25 fans from Noctua (6*20…
I'm using Ikea Lack as print box (with 100mm raiser). As expected, the hot air accumulate on top, where bottom is relatively cooler. After 10hrs printing the top is ~5'c hotter than bottom. I made this air circulation pipes/stand which…
I previously added a BOFA Print Pro 2 to manage filtered exhaust from the upper back panel of the EnXLosure. I then decided I'm wasting warmed air and decided to recirculate the filtered air back into the EnXLosure to help maintain temps.…
Fan System This fan system is dimensioned to replace the glass rear top panel of the official enclosure, but it can be used with any compatible enclosure. Operation With the doors fitted the valves are open and chamber air is filtered and…
Documentation for this project is currently a work in progress. Features: Magnetically attached filter modules with 5015 blower fans Can be oriented fan down to circulate air from lower half of chamber, OR fan up to pull warm air from…
I wanted to do as little modification as possible to the printer just to make life easier. This remix removes the exhaust functionality of the printer and repurposed the exhaust fan to recirculate the chamber air and filter with activated…
This allows you to mount 120mm fans on a vertical piece of 3030 extrusion. It was designed to help with air circulation when heating the chamber for more even temperatures through the chamber. I have 1 fan's airflow pointing upwards, and…
Reduced height. Simplified model for printing. Reinforced support structure. Unnecessary elements removed. Optional: Lid light weight model (lighter than the standard on 30.9%) Lid super light weight model (lighter than the standard on…
Made this, for a friend, to increase the circulation by changing the water flow in his pool.
Add external recirculation and filtration to your printer, and improve the uniform temperature distribution in your print chamber. This bracket set is designed for 50mm ID components such as the hoses that come with the Bofa 3D PrintPRO…
A ramp to help circulate hot-air from the Creality chamber heater.
Hi, Here's wheel for dishwasher water circulation pump. It fits for ACC EB085d25/2t pump. AEG p/n: 1113196008 replaces: 1110996905 Printed on PETG with 100% infill and 0.2mm layer. printed slowly 800mm/min for good adhession and surface…
I redid the side panel for the CoreOne L for use with @TheNexusAvenger "BentoRoll" Recirculation Filter and added a built in switch box for external control. STL and STEP files attached. Switch I used and the barrel connector for power I…
Creality K2 Closed Air Recirculation Filter (HEPA + Activated Carbon) This project converts the stock exhaust system of the Creality K2 into a closed-loop air recirculation system designed for printing engineering materials such as ABS,…
I was afraid any of critters would move into the pump while it was turned off so I made this to avoid a fish or anemone milkshake in my nano.
Deutsch Insgesamt 4 Teile zum Drucken: 1 Teil ca 300 Gramm Dieses Modell hier wurde mit einer Ki-generiert nach meiner Anleitung/Vision. Dieses 3D-Modell ist eine Halterung, z. B. für Desktop-Computer, mit der diese seitlich aufgestellt…
🖼 Illustration centrale : Image du panneau triangulaire avec fond brun et silhouette de tracteur (comme celui que tu as fourni) 📘 Description : Ce panneau avertit les usagers de la route de la présence possible de véhicules agricoles,…
This design adds a pump to a children’s water table. It uses a low cost submersible pump, and some flexible tubing (ID-5/16”, OD 7/16”) to pump water from the water table’s drain up to the top feature. Using a 12V pump and a battery…
With this project i would like to improve the air quality in the room, my 3d printer is working. I wanted to be able to switch between recirculation mode and exhaust mode, to decide based on the used material, to use as much filtering as…
A remix of the middle part of The Rookie's excellent filtered recirculation mod.
John Deere Recirculation Air Grille Inlet AL114101
Includes a modified inlet bracket and inlet valve for re circulation from a CPAP flap. Also need the inlet valve here: My Mammoth is internally mounted with a bracket I've uploaded separately here: And the driver cover is available here:
This fan holder serves to ensure air circulation within the EZYSTORAGE 50L DRYBOX. Pro zajištění cirkulace vzduchu v EZYSTORAGE 50L DRYBOX slouží tento držák ventilátoru.
the missing files can be found in the original model
Removed the blade guard from the model for less air resistance, adjusted the thickness of the duct a tiny bit to avoid crashing and belt rubbing. You can use the stock phillips screws for the faceplate or you can use these M3 x 14MM…
Use in conjunction with Internal Circulation mod: https://www.printables.com/model/1473971-ad5x-internal-circulation-air-filtration-duct-with And additionally I made it for use with the Hygrometer/Temp cover with holes:…
I wanted to do as little modification as possible to the printer just to make life easier. This remix removes the exhaust functionality of the printer and repurposed the exhaust fan to recirculate the chamber air and filter with activated…
-Added a version with a 5.5mm deeper filter compartment in order to add active carbon filters -Added seals holder -Added two 'less supports' versions with the middle strip removed, the filters are supported by a thicker lip. Many thanks…
![Trident Air Circulation System [TACS], an air filter for Voron Trident with magnetic under-bed mount.](https://media.printables.com/media/prints/d716be67-7843-4003-8d52-2236a18dc8c6/images/11228900_7bd8dc14-7f9b-40b4-9b30-c202c6a515e5_99884b3d-9a56-42ed-b9ba-581ce73bb668/fusion360_2025-11-22_20-37-51.png)
