3550 modeli
Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
I was looking for a low profile CNC clamps, which clamps material from the side of the material, not from the top. I wanted to have access to all the top surface while milling, not covered by any clamps. My clamps has 15deg angle, so they…
Wydruk około 3,62 €–4,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…
Wydruk około 7,56 €–9,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This is a 4 part cnc router dust boot assembly designed to be used with the Makita RT0701 router spindle or similar 65mm router spindle. The main body features 12 exhaust ports to expel the spindle exhaust perpendicular to the boot and…
Wydruk około 10,49 €–12,82 € nettoWstępna wycena jednego wariantu
3D printable bust of Vecna inspired by Stranger Things Season 5. This is fan art and not affiliated with Netflix or the show creators.
Wydruk około 13,58 €–16,59 € nettoWstępna wycena jednego wariantu
Étau pour CNC 3018 avec brides de fixation + équerre Goupille de diamètre 6mm pour le blocage du poussoir sera nécessaire. Print instructions PLA 0.30mm base, mors mobile, équerre, bride étau. 0.15mm poussoir et vise.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This is a bit of a remix of my dust fence to make it shorter so there's no collisions. These are to give you a definite, repeatable origin for use with the CNC. You can combine them with my fence to help contain dust on the work surface…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
OŚ Z - do frezarki CNC - zamiast aluminiowej konstrukcji wydrukowany kawałek profilu konstrukcyjnego - Całość w połączeniu z silnikiem krokowym oraz śrubą T8 tworzą mechanizm który porusza osią Z - możliwość montażu zarówno wrzeciona…
Wydruk około 14,05 €–17,18 € nettoWstępna wycena jednego wariantu
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You know, for the kids.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
Wydruk około 10,13 €–12,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set of 3D print to replace the clamp for CNC 4040 from Genmitsu using their screw and nuts. The design is inspired by the clamps used if milling machine : a stair case and a finger are attached to the bed in a way that the pressure on the…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Just an osVAC M32 Parkside PWD 30 B1 Adapter :-) based on osVACneo Fusion360 files. Printet with suppport on bed only.
Wydruk około 10,85 €–13,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A place to hang your picnic tap inside your fridge.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
My CNC came without an enclosure for the controller. This is my attempt to fix that. Printed in PETG with 0.4mm nozzle, mostly the “structural” profile. For the top (Oben) of the box there should be some painted supports inside the holes…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (AP2 Style)! The model is not perfect, but it is better than the Weller version if you have an AP2 adapter I can't remember how much it weighs and how long it takes…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Zubehör für FoxAlien Masuter Pro CNC. Vakuum Halterung, Knopfhalterung, Gebläsehalterung (Potentiometer) für 20 mm Nutprofil welches auf der Front genutzt wird. Cnc Zubehör. Verwendet von mir: Knopf: GeKLok 5 Stück KCD11 10 mm x 15 mm…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Add-on for the CNC 4040-PRO to hold the Probe, the tools for the collet and the 2 allen keys. The model needs a magnet (10mm or less): The magnet will hold the holder on the junction box on the Z axis and at the same time will secure the…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Vertikální grip na zabraň M16 od značky SPECNA ARMS konkrétně modelu SA-A90. Grip je dělán pouze na předpažbí tohoto modelu, tudíž nezaručím že bude pasovat na jiné zbraně a jiná M-lock předpažbí. Grip je velice solidní drží krásně na…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Low cost (0.10 $US) Enclosure for Adafruit VCNL4040 Proximity and Lux Sensor to allow for handling, use and mounting of the sensor.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Best be printed in PLA to nail the overhangs from the tire studs. No support needed in this case.
Wydruk około 2,60 €–3,17 € nettoWstępna wycena jednego wariantu
I made this tool to put on our CNC machines to signal to the next user. The Stop / Load magnet is to signal if you can set up the machine with something new or if someone is in the middle of a job so as to not disturb it. While posting…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Doporučeno PETG kvůli omyvatelnosti. Lze doplnit obrázkem a pod.
Wydruk około 3,84 €–4,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Superpinda near hotend for voron afterburner, stealthburner.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This is a modification of the Insert - Bottom (No Holders) , made to fit CNCKitchen deburrer . This is just a customized insert to the following model Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style by @Lndnny. Print settings…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
THIS IS NOT A TOY AND CAN BE DANGEROUS! This model is mostly supportless & can be built without taking the electronics apart (no need to de-solder electronics). UPDATE LIST & EXPERIENCE: So I tought that the motor was exclusively built by…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
My daughter was given a LeapFrog shape sorting picnic basket toy, which has strange little cups that specifically fit into the little plates that come with it. We were missing one, so I designed this replica of the original. It's pretty…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Christmas led tree 1/ print all parts 2/ drill 1,5mm holes for wires 3/ insert wires 4 isolated(vcc), 4 unisolated (ground) 4/ solder black isolated wire to joined 4 unisolated (will go to push button) 5/ solder 100R resistors to vcc…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Check out my other Halloween models if you like. Description: I created these cute pumpkin bottle opener in Blender. (This is not an AI model ! ) There are bottle openers for 6 different coins. Each available in 2 versions (single color…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Updated LowRider CNC v4, here, https://www.printables.com/model/1034840-lowrider-4-cnc This is a full sheet capable CNC router. Size is up to you within reason, tool you use, control board, firmware, and end use is also up to you. I am…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Welcome to the LR4, the LowRider CNC v4, AKA the most productive you can be while still scrolling on your phone. Let the robot do your dirty work while you scroll away and keep an eye on it working. This is a full sheet capable CNC…
Mostly Printed CNC Primo Version MPCNC "F" 25mm Version Released on 7/23/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
Looking for a solution to reliably hookup CAN devices, fans, sensors and more to your beloved 🥰 VORON with a tiny bit of 😎 premium touch ? This custom skirt for CNLINKO LP12 (and compatible) connectors might be it! Why This Mod Exists…
Mostly Printed CNC Primo Version MPCNC "J" 25.4mm Version Released on 6/22/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
This is a workpiece clamp for the 3018 CNC engraver. It can easily be used for small or medium height objects
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
edit: this File now exists on cnc kitchen's site: https://www.printables.com/model/342075-extrusion-test-structure CNC_Kitchen_Extrusion_Test_part_with_Volumetric_Flow_Rates CNC_Kitchen is not me! only wanted the file an it didn't exist…
Vecna (Stranger Things) - Relief Sculpture Infill: 5% gyroid Supports: NO Layer: 0.12 Feel free to download it too Demogorgon (Stranger Things) - Relief Sculpture…
Model size: 180x400 mm Wood used: White Pine, White Maple Stain used: Golden Pecan CNC machine used: DIY CNC Router CNC Process: For the Adaptive-Clearing Job, I used a (SPE tools ¼in up-down cut bit: Amazon link ). At 500-1500mm/min…
Tool mount and dust shoe for the Makita 700 series palm router or the Sienci AutoSpin T1 and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
COMPLETE SET HERE: https://cults3d.com/:4425163 Want to sell physical prints/carvings of this model? Join my Patreon to get a Commercial License and access to exclusive models every month! https://www.patreon.com/cw/mona3dstudio Stunning…
Mostly Printed CNC Primo Version MPCNC "C" 23.5mm Version Released on 8/29/20 Questions are best asked here, https://forum.v1e.com/ Print instructions https://docs.v1e.com/mpcnc/PParts/
Akaki's Picnic is a series of small but tricky packing puzzles. Pack the pieces into the basket 🧺. The 17 different puzzles use the same basket. You can print a basket to go with each puzzle, or use one common basket. The goal of each…
Dremel CNC was designed with simplicity and ease of build in mind. With a list of easy-to-buy components and mostly 3D-printed parts, it's one of the easiest and cheapest ways to get into hobby CNC machining. Dremel CNC was already built…
This is the test hook I've been using in many videos to test the strength of various 3D printed materials. My usual print settings can be found here: https://www.patreon.com/posts/filament-test-16238656
The DrawBot is similar to the commercially available AxiDraw. It is powered by an Arduino Uno controller, uses a CNC Shield, and GRBL firmware. The approximate cost to build the DrawBot is $100. Recently some makers of the Drawing Robot…
The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…
Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the hose zipped in initially but it will soon conform to the curves…
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
This is just a tiny little model for the Option Plate Mod of the 🥰 BoxTurtle's rear skirt. It accommodates a CNLINKO LP-12 💪 connector, e.g. to connect both CAN and 24V. Additionally, the design incorporates a dedicated cable outlet for…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
This is an Ender 3 Pro based CNC! Watch it in action here! Build manual here! We now have a Discord! EnderCNC's GitHub Check out the user-builds !…
Vecna bust Sculpted in blender using remesh method High poly model not optimized This is my first model for 3d print My print settings: Material: PLA Nozzle: 0.4mm Layer height: 0.2 Infill: 25% Tree supports: Yes only touching buildplate…
🇨🇦 Welcome to Canada Bienvenue au Canada! This model was designed by Dany Sánchez . The CN Tower (French: Tour CN ) is a 553.3 meter-high (1,815.3 ft) concrete communications and observation tower in downtown Toronto, Ontario, Canada.…
100mm T-Track Clamp, T-Nut Halteklammer 100mm M6 for up to 50mm Materials Flexible adjustable holder and Knob for M6 Support: yes only in the Slot Infill: 60% Gyroid Infill M6 Set Washer, Screw, Bolt…
This clamp is based on the Carbide3d Essential clamp . I needed a clamp that was a little bit longer. The Fusion 360 model is parameterized so you can change the length if you want. The STL/3MF model is 5 mm longer than the original. The…
Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…
This fixture is designed to machine AR-15 80% lower receiver fire control group pockets. The receiver is affixed vertically to facilitate FCG pocket machining. The fixture is designed to screw down to the 75mm on center M5 bolt pattern of…
This model prints in place as one part and doesn’t require any supports. It prints flat but folds into a picnic basket! Printed with Inland Red PLA on the Muldex rep-rap IDEX. Support and Licensing If you would like to help support more…
Varying sized clamps for using has hold downs on CNC table. I find it best print them lying down on the side, support is needed. Generated Clamps Options for bolt sizes M3, M4, M5 Lengths 25mm-150mm Heights 3mm-100mm OpenSCAD The clamps…
Easy print LR4 specific Jackpot CNC Control Box. 6 Qty - M3x10mm hold down the board and lid. The optional Fan can be a 5015 (2 - M3 x 20mm) fan or a 5010 fan (2 - M3 x 15). Voltage should match your board input and wired directly to…
This is a quick jig i made to hold an AR15 level for engraving. It has been designed with mounting points 75mm on center to match an X-Carve CNC wasteboard. Two of the M5 thumbscrews are used to secure the jig, the third M5 thumbscrew…
Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…
I always wanted to have a neat way to feed the friendly squirrels in our garden and this seemed like a fun opportunity to create something. The basket is designed so it has a snug fit and doesnt fall out unwantedly, but it can still be…
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
I didn't like the way the cables were hanging around the CNC machine so I made a printable drag chain. Printed with a 0.4 nozzle on 0.2mm layer height in PETG. I used a drop in T-Nut to connect the start piece and the end part clicks on…
3D model of aluminium profile 15180 used for CNC 3018. Dimensions 15 x 180 x 300 mm. There is also DXF with cross section drawing. Print instructions Category: Machine Tools Summary 3D model of aluminium profile 15180 used for CNC 3018.…
Hello friends Here we altered the 3018 DIY cnc with mostly 3d printed CNC The design is completed. Alluminum Extrusion required all are 2020 slot 220 mm 2 nos 350 mm 6 Nos 8mm ROD 400 mm 2 Nos 360 mm 2 Nos 110 mm 2 nos Bearing LM8UU 10…
In addition to my remix of the bearing block for the floating bearing of the Y-axis , I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard…
This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (Weller Style)! CNCKitchen.STORE…
Updated on 7-29-23 - Y Axis plates & drill guide (.stl .dxf .pdf) It can be made with (Mdf, 3d Printed or Laser Cut) "Just Follow This Post For Updates" I will have all the plans done soon but for now i will upload the end plates (.dxf…
This is a modular CNC 3018 Pro Z-Axis upgrade I have created a while ago. It is highly optimized (for usage as well for printing, e.g. water drop holes, etc.) but still work in progress. More details will follow in future.
Flat Starlink case designed to be cut with a CNC. The total dimensions of the finished case are 554.35mm x 344.8mm x 30mm+height of whatever plastic you use for the lid Instructions: CNC case. I used a 560mm x 350mm x 30mm piece of…
Customized version of http://www.thingiverse.com/thing:1264391 This Arduino Uno + CNC Shield enclosure is for my Drawing Robot https://www.thingiverse.com/thing:2349232 This is a work in progress. Print Settings Printer: HyperCube…
You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…
Compliant mount for 11-12mm Drag Knives, and/or 11mm-50mm Pens and markers.
Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools
This machine was designed with the goal of being fully 3d printed. The price for this machine (Excluding control electronics) is about 600$. The frame is made up of 2020 and 2080 extrusions. The motion is handled by MGN15H linear rails,…
Case para Arduino UNO R3 con el CNC Shield. Incluye botón de reset.
Basic picnic table. Works with 0.4mm nozzle, though 0.2mm would be better. 1:64 Scale for Toy City and Farm Displays.
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
This is my design for a CNC Laser for more information you can visit My-Laser CNC Oficial Page Still in development i'm building two prototypes one for me and one for a client. If i make any changes i post here, but please keep in mind…
Openbuilds 2040 V-Slot The plates are 8 mm thick and are designed for 2040 v-rail. Y-Plates: One of the plates is designed for a Nema 17 stepper motor and the other accommodates a 16 mm f625zz flanged bearing. X-Plates: The back plate is…
CNC bit storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
Basic mount. On the top mount the word "UP" should be mounted so it can be read properly. The clamps have a rounded corner side and a chamfered side, they match the mount part. You will need to rotate the spindle lock to make the mount…
This is a model of a 40mm end mill, which rough dimensions were taken from a real life 20mm end mill. This was a gift for my fellow CNC-machinist student for completing his apprenticeship.
Simple parametric cable chain designed for IndyMill CNC machine. There are two versions, 20mm that can be used with 2020, 2040, 2080 and so on aluminium profiles and 40mm version that can be used with 2040, 4040 and so on profiles. Thanks…
Over 23 different tuning parts for your 3018 CNC Look at the photos to see the functions Printed with PLA or PETG Have fun I have printed: 3D printed components 2x limit switch holder X-axis 2x limit switch holder Y-axis 1x Z-axis limit…
About I've always loved Toronto's tallest free standing structure and was looking for something to practice my Fusion 360 skills with so I designed this to-scale architectural model of the CN Tower. The entire model was designed and split…
![PaScn3D Mk.0 - 3D Scanner [PrusaPrinters Contest Edition]](https://media.printables.com/media/prints/23297/images/237355_72dadc53-8e36-4086-b7eb-9482eba771ac/step27.png)
