529 modeli
I needed this to fertilize tiny seedlings without flushing them away. This should fit most EU bottles. All the other shower type caps I tried were leaking around the thread, or did not fit at all. If the holes don't print clean enough,…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Passive CO2 diffuser bell for use with low-pressure DIY CO2 generators. I have used these for years successfully when you just need a bit more co2 than the atmosphere provides. Printed with PETG, .3mm layers, no supports necessary. Once…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meet the 30mm CO₂ Fun Grenade – where creativity meets excitement! Designed to turn engineering into play, this 3D-printed grenade (PLA, or any lightweight material you prefer) is made to look awesome, feel cool in your hands, and deliver…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
I designed this to keep the CO2 bottle for my budget aquarium C02 fertilizing from tipping over. Fits an 425g C02/60 Liter/ 60mm diameter CO2 bottle Print instructions Used PLA, 0.3mm Layers
https://apolloautomation.com/products/msr-2 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
I've been having fun using Shred-er mags with the Vigilante, but in my shop I'm frequently hunting insects larger than flies. A little more ‘oomph’ would be fun. Current versions: The V10 barrel and V8 cylinder are quite functional, well…
Universal PUNCH BUTTON & CO2 Cylinder Opener/Tightener for Umarex T4E HDR/TR50, HDR/TR68, HDP/TP50 & HDS/TS68 - Cal.50 & Cal.68 airguns. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.15mm…
These are co2 cartridge powered rockets which can be used in Co2 rocket launcher Files include few other versions of the rockets + .step files for anyone to create remixed versions.
Hello together, Who doesn't know the struggle with CO2 cylinders lying somewhere around in a cabinet taking up a lot of space? Therefore i designed a small bracket to screw into the cabinet. Depends on the bracket you need, it can hold…
Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…
A Nut to replace the original SodaStream Nut wich is pressing the Tube in the bottle head. The broken “old” nut can stay on the black tube. printed in PLA with a layer hight of 0,2mm
Es una base elevable, derivada de esta https://www.thingiverse.com/thing:3051286 . He realizado algunos cambios para que sea manual en vez de motorizada, y utilizando algunos elementos menos. Estos son los elementos que necesitamos para…
The Apollo Automation R PRO-1 PoE mmWave Multisensor (LD2450 and additional LD2412 add-on option) is our most advanced presence sensor. Designed for power, precision, and reliability, the R PRO-1 is a compact PoE mmWave sensor built for…
This ist not a toy for children! This rocket-experiment must be guided by adults! Be careful while handling with the CO2-Cartridge! Use a ramp as shown in one picture! A DN-50 tube. Printing ist easy. 50% infill. Das ist KEIN…
Store your CO2-capsules in a nice container. Have an overview wehen running out of capsules. Easy to print, although my print was sub-optimal, but the part works, which is the most important. Does its designated job. TinkerCad design.…
WARNING CO₂ is under pressure! THIS MUST BE USED ONLY WITH SAFTEY VALVES IN PLACE This still may explode or break - be prepared Be careful Cover with towel when testing Wear eye protection Print slow with 10 perimeter/walls Use PCT, PC or…
Update 220109: On request, added a five-bulb variant with provision for a 6.5mm allen key (CO2 x5 w-6.5.stl). This is based on the low-poly version I've been experimenting with. A relatively straight forward cradle to hold three, four,…
A dragster made to be powered by a standard CO2 cartridge for a summative project in grade 9. The original design was made out of wood and has a few differences due to the tools used to manufacture it and to reduce some weight, but I also…
Features: • Holds up to 8 12g cartridges • Sturdy design ensures durability; no flimsy construction • Suitable for regular use with airguns and air pistols • Requires 6 M3 screws, 20mm long, for assembly • Store the cases laying flat or…
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
Features: • Holds up to 25 12g CO2 cartridges, each securely held in place • Sturdy design ensures durability • Suitable for regular use with airguns and air pistols • Requires 2 M3 screws, 12-20mm long, for assembly Recommended Printing…
This is a reverse alignment tool for Co2 laser machines from Omtech. I upload this upon request, but I really encourage that if you can afford to, that you purchase the “real” tool from American Photonics, it even comes calibrated! Please…
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Wide, save stand for 60mm Co2 bottle (e.g. SodaStream) for aquarium Co2 systems Opening diameter: 61mm, stand diameter: 120mm, height:100mm *if you have a smaller Co2 system, you can scale it down to 80mm Easy to print and with a fast…
Support for CO2 Cylinder for Sodastream or similar. The "Bottom" part is minimal conic, so the Cylinder is stored safely
28.03.2024 New version uploaded 9.0-9.5 - 9,5mm and 10mm wide with better surfaces on the sides. 02.02.2024 New version uploaded 8.0-8.4 - different sizes and more square looking pin to give more strength. 23.01.2024 New version v7.0 -…
Two models: One for nine pieces of CO2 cartridges, made for screwing it to e.g a piece of wood One single holder Print with TPU , 95A should be soft enough
APS CAM870 mk2 shell with standard depth. There is also a 30mm and 40mm depth version in the files section. Test cycled 20 times and no degradation on the PETG. Print with your highest temp to strengthen the bonding between layers. The…
!!! BE SAFE - CO2 AND HIGH PRESSURE CAN BE VERY DANGEROUS !!! !!! ATTEMPT AT YOUR OWN RISK !!! To prevent this, test everything before firing, be sure the rocket slides freely in the pipe. You can drill small holes at the base of the pipe…
Not my model. Just reposting here. Credit to the original creator! Thanks for this, can't wait to give it a try. A replica PMN-2 landmine for wargame & military training. Cheaply create landmine simulators to enhance your training. One…
Bike CO2 mount to be used on a 36,76mm diameter tube, but has been tested on a 31mm seatpost (look the images) with no problem. UPDATE (22/01/2022) : Added 25g CO2 holder for 31,6mm, 30,9mm and 27,2mm seat post. The measured 25g CO2…
I CAST WALL OF TEXT I am an airsofter who has just moved to a place with no airsoft fields nearby. There is, however, a local nerf club. I decided to put a blaster together and give that a shot. This project is that. It's my first time,…
You only will need some M3x40 screws.
This is a remixed nose cone for Co2 rockets that can be launched from a handheld launcher. The base is printed upside down, with NO NEED for supports. The top does need supports. I think this nose looks cooler, and it allows you to have…
This is a more durable version of CO2 Target port by biv2533 Original description: "This is a simply target port. How to recycle the exhausted CO2 12gr. bottles and transform them in a simply target for softair guns or compressed air…
I made this replacement part after the original part broke and started leaking too much to carbonate the water. Fairly easy to replace the part, I reused the brass parts as well as original O-rings and the machine has been working great…
This adapter allow to connect hpa tank to chinese asg co2 pistol kwc 941. It's tested and working. Outher thread - M21x1,5 Fill nipple - M10x1 Ptfe gasket - OD 8,8mm x 2,4mm; 3mm thickness (this is crucial part!) Alu tube - OD 6mm x 1mm;…
https://apolloautomation.com/ The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
You will need M3 heat set inserts, 2 M3 set screws (grub screws) and 2 line laser modules. I am posting this per request so I am not going to do a step by step but just set up as you see in the photos. Adjust the lasers with the end caps…
Three models for 12g gram CO2 cartridges. 19.0 mm for a loose fit. 18.8 for tension. 18.6 for a really tight fit. I typically use these to make water torpedos for pool use.
Description: A small enclosure for a Senseair S8 CO2 sensor and a Wemos D1 Mini ESP board. No supports and no fasteners needed. Everything just slides into place. Tips: Make sure the wiring connects from the wifi-side on the D1, and the…
Summary An Air Rifle that shoots 1 inch blow darts powered by CO2. Magazine fed with shell ejection mechanism DISCLAIMER: By downloading these files, you agree that I shall not be liable for any damage, injury or harm resulting directly…
This is probably a bad idea, but it was made anyway. Insert a 12g Co2 Cartridge into the rocket. Drop it on the launchpad and see it take off.
My laser cutter came without a tool to remove the lens, so I made my own. For C and E series laser heads with a 20mm lens. Add a 25x2.1mm nail without the head using a soldering iron. The nails I used were left over from an IKEA PAX…
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
This is a "Gatling Gun" trigger crank designed for the Ruger 10/22 CO2 air rifle by Umarex and it transforms a 1/4 turn rotation of the crank to a press of the air rifle's trigger. The assembly require a M3x20mm bolt and nut, and two…
Its a little Rack for 3 co2 Bottles Sodastream
Each tray can hold upto 20 12g CO2 cartridge and has holes in the bottom where the neck of a bottom tray of cartridges fits into. The 3mf file is setup for a 0,6mm hardened E3D nozzle using PLA. Check the print settings if you use…
3 slots CO2 bottles container for safe storage in backpack or side bag. Caution: before the 1st usage use abundant WD40 on treads to ease the coupling. Following the first go no more treatment is required.
DIY CO2 Scrubber Cut a 1/2” hole at bottom of acrylic tube to allow air through the intake hole into the center of the tube. Print, line up acrylic tube hole with base intake hole and assemble. You can glue it with plastic epoxy but it is…
This is a replacement backplate for a TFA Dostmann “AirCO2ntrol Mini” CO2 sensor that includes a separate compartment to hold a Wemos D1 Mini connected to the sensor's debug port through a passthrough slot. The ESP allows you to put the…
A modular rack for the CO2 cylinder, to store them more efficient in the shelf. The rack fits perfectly on the IKEA Hejne shelf. The parts are screwed together with M3x16 Screws. The connectors are unthreaded and the Screws are screwed…
!!NOT TESTED!! I found this model which I made back in 2021 so I don't know if it works or not. I think it could work but you need to print it with really strong material. It's a bolt that tightens the CO2 cartridge into the magazine of…
The Senosor became too hot on the first model despite the honeycomb on the lid. For this reason, I also had to design the outer wall with honeycomb. Now there is no heat problem in the housing and the sensor measures the content of CO2 in…
The first gasbottleholder needs screws. This version is slightly different and do not need screws. Some bolts holds everything in place. If you feel better, you can glue them together.
No support is needed.
Design credit to Lizzie Rothwell and Akiva Rubin Uploaded from https://aranet.com/print-out-your-own-aranet4-3d-cover-case/ Uploaded to Printables to widen exposure. This is a protective case for an Aranet4 Carbon-dioxide (CO2) monitor.…
I have a small arsenal of C02 and spring-piston BB and pellet guns. I store all of them in a single rifle case. However, I didn't have a good way to store 12 gram CO2 cartridges in the case without them rolling around. This design lets…
I got tired of my CO2 tanks falling over and damaging the gauges. This thing makes them much more stable, though you can still knock them over if you try. Print Settings Printer: MendelMax 3 Rafts: No Supports: No Resolution: 0.2 Infill:…
Drop in replacement barrel with 4 picatinny rails for Yeets rocket launcher. Uses the same 190mm rails that are included with his model. I rounded off and shrank the hexagon pattern to provide a smoother printing experience. You should…
A mix of the great design from FranckB to receive a CO2 cartridge. I double it and bring the two on a picatinny receiver salvaged from SocksofGranduer . This receiver is interresting because you can lock with a three-pin part rather than…
Please see Head mount and Sled mount V2 version for longer and lower head adjustments and easier access to screws. The original one was to tight to allow adjustment without having to take the head off, I basically redrew to make it easier…
to make it fly you have to puncture the base of the cartridge and it will take off and (hopefully go really high. It works about 80% of the time if done properly. most 20g cartridges will work.
I bought a 5 lb CO2 tank a regulator and some adapters to make my own soda water. Unfortunately I didn't have a good place to put it so I decided to just strap it to the wall. This bracket fits the cylinder nicely and holds it very…
Hello! This is a super simple holder for 16 gram CO2 cartridges. I wanted to have some pseudo test tube holder, instead of just leaving them in the box. It can be made WAY more efficient, so don't be afraid to modify this model, or make…
CO2 Holder that attaches to bike via water bottle cage. Holds two 16G CO2 cartridges and threads into holder so no velcro needed. It goes great with this on bike tool box… Mountain Bike Frame Tool Box by mhatten | Download free STL model…
I created this model because I lost my cap and was worried that Aldi might not accept the cylinder without a cap…
I hate having my co2 cartridges dangling at the bottom of a box so I made this solution for storing the cartridges.
CO2 Laser Focus Lengh Tool This Model is for CO2 Laser with a total focus length of 50,8mm and a distance from the toolhead to laser surface of 10,2mm. This is used by the Cloudray Laser Heads Typ K 4060 V1 and V2. Use FL side for the…
Low-profile, height-adjustable laser tube holder with a diameter of 80 mm.With space for storing a 3x8mm silicone seal. Printed without support. PETG / layer 0.2 / circumference 4x.
This is a air quality lamp for CO2 metering. I used the design from Lilifee (look at the remix). The original was for the BME680 Sensor. I needed the case for the MH-Z19. So I changed the inner of the case and the "Top"-part. The…
This clip is meant to keep spare 12g cartridges handy, on a belt, wrist, or any velcro shoulder or vest patch. Cartridges rock out at the top. If you merge objects for three or more, it is easiest to use the out-board cartridges first,…
Small bottle-cap adaptor allowing connection with two 6mm ID hoses by using M5 hose couplers (Earlier versions printed the coupler, which had bad results). Cut two M5 threads in to the top in- and outlet, as well as a M5 thread into the…
Hi ! This is a CO2 diffuser for plant aquariums. It is true that you can buy a usable CO2 diffuser for around 10 euros, but it costs about half a euro and atomizes carbon dioxide much better. The material of the pumice stone is smooth…
Race car that fits a co2 cartridge in the back. This design is meant to be printed and used with metal axels. Most co2 race kits come with axels that can be used for this. Category: Vehicles
Colt 1911 KWC Mag speedloader adapter co2 cartridges Tired of having your fingernails destroyed by those horrid pointy sliders? Wait no more print this. Will work with 1911 mags with co2 cartridges. Video: Print it in ASA/ABS or something…
This small square thingie makes your used CO2 cartridge look like a bomb. Might be used as a prop for RC planes.
You will need co2 cartridges, these 7,5g worked great for me: https://www.slehame.cz/sifonove-bombicky-kayser-7-5-g-co2-25-ks-na-jedno-pouziti/ Also get a 1,25m PVC pipe with 28mm inner diameter (32mm external diameter) Then print these…
I let the gasket for the CO2 cartridge on my Crosman 357 pellet gun dry out to the point that it would not hold pressure when a new cartridge was punctured. I was able to remove the old gasket and take some measurements and this printed…
Soda Stream CO2 Cylinder Holder (multiple sizes) Holder for clean storage of Soda Stream CO2 cylinder. Made 4 different sizes (3, 4, 5 or 6 cylinders). Cylinders can also be stored in second or more rows, the bottom cylinders won't slip…
About This device screws into the hopper port on the back of a Pinter . There are two versions, one is threaded for a ¼" NPT connector, the other is unthreaded and you'll have to tap or modify it yourself. Assemble You'll need a few…
A modular stand for 425 g CO2 cylinders / bottles used in home water carbonators like the SodaStream system. The stand consists of one end and one intermediate piece design, which are connected like a jigsaw puzzle. Tolerances on the…
Compact and light version (about half in weight of original). + whole gun setup Print instructions Category: Tools
A stand for a 60mm Sodastream CO2 bottle. The stand has an integrated design with a locking lever that locks the stand to the bottle and preventing it from sliding out if you move the CO2 bottle around a lot - like I do in my brewery.…
Instruction as on thingiverse for the model by Kamuno: This is an adapter for using conventional screw-in co2 tanks in any sodastream carbonator with the new quick connect system. I printed it with petg and it works but if you have…
Do you need it? Probably not....These things are rare, collectible and expensive. But hey if you got one You know they come with six bullets. Never hurts to have a few extra! Ream them out with a 5/32 drill bit till the BB just friction…
Sensor Case with Presence Detection, CO2 Meter, Lux and Climate There are several sensor boards with multiple functions, but no one sensor has all functions on one board. That is why there still is a CCS811 CO2 eCO2 TVOC sensor in the…
This is a work in progress. The few launches that I tried, all failed. The rocket comes out of the tube and tumbles end over end. Please let me know of tolerance issues. I will update as I can. I'm still pretty new to Fusion360. !!!BE…
The case includes the Sensirion SCD30 CO2 sensor and an AZ-Delivery NodeMCU V3 board. In the attached FreeCAD file, custom adjustments can be made in the spreadsheet. Wiring details can be found in the images. Programming is done using…
As seen in my youtube video (full of failures) here are the files for the plane and the co2 firing mechanism. There is some playing around to be had with the CofG of the plane but I hope you enjoy it as much as I did. i printed it in LW…
WARNING:!!! The CO2 Cartridge MUST be empty. There are plenty of YouTube videos on releasing the gas. I do not accept responsibility for damages due to stupidity! Using an empty CO2 cartridge for a you can cut the top of the cartridge…
A stand for a Sodastream cylinder/tank/bottle. I use it in conjunction with my Sodastream Co2 injection system for my aquarium. Category: Pets
its still a work in progress it should work with a 21mm PVC pipe and a 12g CO2 gas canister which is often used in airsoft guns. I'm not sure how effective it will be, but its just a fun project.
DE: Ständer für Soda Stream CO2 Zylinderflaschen. Auf der Unterseite kann zusätzlich ein O-Ring aus TPU gedruckt und eingesetzt werden. Dieser soll ein verrutschen verhindern, und die Oberfläche vor beschädigungen und Kratzern schützen.…
This is a "reverse alignment laser" that you can use to align a CO2 laser mirrors starting at the end furthest from the tube. CO2 lasers are invisible IR so you usually use a "scorch test" where you stick some tape in front of the mirror…
More of an application for home defense than say actual field play, but hey, you do you. Obviously nothing preventing this from spinning other than a slight friction fit. Piece has a boss in there to make it longer to fit me better, so…
We organised a workshop in our local hackerspace to build CO2 sensors with a bunch of people so you can take care of your air quality at home. The sensors runs ESPHome so you can integrate is easily into your smart home like e.g.…
