800 modeli
BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, I have been disappointed with the performance, cost, and size of cheap morse code paddles. So, I designed my own. For portable ops, or to…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Locking system for Original Prusa CW1 IPA tank cover prevents spillage of containing liquid in case of accidental tipping. Print instructions 3MF is prepared for all in one printing. No supports required. Tested with Prusament PETG
Wydruk około 11,79 €–14,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgrade the platform on your CW1 to the CW1S version. The platform will become easily removable with the option of attaching the protective FEP foil. Both the Platform star and the Ring separately fit both the MK3S+ and MINI+ bed sizes.…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really like the K6ARK morse code key, but I have managed to break a couple of them by carelessly storing them in my kits. This case prevents the paddles from being touched while stored. It is designed to hold the key in the case with a…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 9,14 €–11,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
A replacement or additional lid for the CW1 vat. Print instructions I designed this because I purchased another container to use as a prewash. Trying to cut down on the IPA. I found handling the supply one and pressing the button down…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
CW Iambic Paddle (3D Printed) This is a mostly 3D printed CW iambic paddle that works well for everyday use. It’s not a high-end metal key, but it performs reliably and is a solid option if you want something simple, affordable, and easy…
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
Note: The reservoir funnel is designed for one-directional use. The circular part goes into the water reservoir in the back of the WaterPik and the rectangle is supposed to fit onto the head of a sink. Although it is specially designed…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Quick and dirty adapter for aligning the gastro pan fryer basket in the CW1. This enables drying and curing with the fryer basket in the CW1. https://youtu.be/h2tb0qGyFAY Print instructions Printed with MK2.5 Prusa PETG 0.2mm layer height…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I didn't have the right length M2.5 screws, my M2.5 threaded inserts were press fit and I didn't want to wait for more hardware to come in, so I adapted the L nuts to what I had on hand. You will need: 4 x “M3nS” - M3 DIN 562 square nuts…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…
I print big things and the thought of wasting filament and time because suddenly, in the middle of the night, the filament runs out, is not something I am fond of. So I created a simple filament sensor mod for Voron's CW2 (RC1), using a…
This model is inspired by the design by USSA Design (watch their video here: https://www.youtube.com/watch?v=2JYTYOJt_m4). I made my own so it worked with my Dewalt DCW604 router. You will need to print 4x support screw 4x support screw…
Adapter allowing DeWalt's DCW210B sander (or any other tool compatible with the DWV9000 adapter) to a Festool 27mm dust extractor hose, with or without the twist-lock mechanisms each connector allows. Updates: 2025-09-21 Increase…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
This is my take on an Iambic Paddle for CW (Morse Code) Operation. It takes inspiration from the CWMorse Pocket Paddles but is smaller and can be made at home! I Recommend printing this in PETG for durability, but you can print this in…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
Remix of "Ultrasonic Sensor Housing" by Ivanchew to fit an RCW-0001 sensor instead of the original SR-04 sensor. If you don't know, the RCW-0001 is a 3.3V ultrasonic sensor which is ideal to use with an ESP8266 :) Onshape model can be…
CW Flash Inspired Helmet Enjoy Category: 3D Printing
I needed to make some varying sized circle cuts with my DeWalt 20V DCW600 router and found bobmakes awesome model. I am even more thankful that he included some cad files as my made mods so much easier so THANK YOU! I originally started…
Love your K6ARK morse code paddle, but want more mounting options? Look no further. Simply print one of these three 3d printed plates to suit your needs; the angled ones for a right or left leg strap, or the straight one for a desk mount…
Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…
A stylish remix of a Ticwatch Pro 3 stand - The model is separated into 3 models for easier print with minimum support and allows you to print it with two different colors. A wider Base with the company's logo. I provided only STL files…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
Rotate Y-axis by 90 degrees Infill: 20% Resolution: 0.28mm Support: yes Block support for text part (and pen holder)
This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on…
Added vents
Simple M12x1,5 Cable Holder for Umbilical with Can-Bus. BOM: 1x M3x20 SHCS 1x M3x8 SHCS 2x Heat-Set Insert M3x5x4
Sawdust catcher for DeWalt DCW600, DCW604 to increase sawdust extraction efficiency, which is easy to snap onto the original base of the DeWalt DCW600 milling machine (theoretically it should work for the D26200, DWP611 as well, but I am…
Background After switching my Trident over to using a CAN toolhead and removing the X/Y cable chains, the one thing that I wasn't satisfied with was umbilical wire management. Unlike on the Voron 2.4, piano wire isn't very practical since…
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel.…
Discussion Update 25 June 2024 The lower filament path is designed for a PTFE tube with a 3mm ID/4mm OD. Chamfer the end next the gears. This will provide a large target for the filament as it exits the extruder drive gears. Update V2.6:…
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…
This is a dual hose conversion rear panel for the "Electrolux Chill Flex Pro EXP35U538CW" airconditioner. I implemented the same Electrolux connector made by wejn . It works great with his 150mm hose attachment .…
Introduction: Inspired by my own “ https://www.printables.com/model/474843-integrated-businesscard-machine ” I wanted to make a somewhat similar design for an apple watch stand/charger. I therefore came up with the “Macwatch” resembling…
Alternative base for DeWalt DCW600 and D26200 milling machines. I made this base so that I wouldn't have to screw the original base onto the milling table every time I wanted to use the milling machine on the table. Cutting depth…
BACKGROUND: After designing a super simple iambic paddle for portable ops , I had multiple requests for a single lever version. So, here it is. I added a small snap-on cover to the design, but it's not entirely necessary. The hole in the…
I recommend 4 top and bottom layers, 3 walls, 30% infill.
this flash hider design is from the designer Hotsauce, that is made for the FGC-9 MKII Stingray edition. that is modded so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.
Print slow and with supports, high infill/multiple perimeters for strength.
Substituted the 5010 part blower with a much more powered WS7040 blower
I really don't like dust flying around my garage, routing edges was always one of the worst offenders. This shroud, combined with the standard dust collection port for DeWalt trim routers, will nearly eliminate stray dust from edge…
A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel
My update filament sensor before and after the extruder for ERCF Rabbit Feeder. 2x sensor D2F-5 2x ball 5,5mm 4x tapping screw M2x10
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. print settings: 0.2 layer hight should be fine. you can use the 8 layer walls and a 40% infill. but personally I…
Introducing the “anorexic” ClockWork 2 aka SKELETONIZED CW2. Lighten up your heavy StealthBurner Tool Head. Use PIF Standards for printing. Preferably ABS, ASA or tougher material. Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill…
Wall mount for DeWalt DCW210 20v random orbit sander
Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…
CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…
Nice feature No need to disassemble the wire harness to install this gland. Bill of Materials Category Qty Description Notes Hardware 3 M3 heat insert Voron BOM Hardware 2 M3x10 SHCS
Mountable enclosure for HCW-M421 Delay Timer Module. Requires: 4x M3 heatset inserts 4x M3x15mm brass standoffs 4x M3x6 screws of your choice for the lid Update 1: Added option of Lid with Integrated Standoffs in Lieu of Brass Standoffs…
print with brim for better adhesion
print thread side up 100% infill 0.2 mm layer height
Circle jig for DeWalt DCW600 DSW604, which is attached to the original guide of the parallel stop and also uses the original locking screw. It is only necessary to melt the nut M3 to fix the circle axis
This is my take on EBB36 canbus board holder for Voron Stealthburner. I have taken the model from Kotvic (Thank you!) and pretty much redesigned it to address some issues I have found with the original model: Heat inserts holes were too…
Remixed Stealthburner CW2 chain anchor for PG7 mount
BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… For portable ops, or to mount it…
closed cable hole on top added 30x30 fan with mouning holes Now nicely closing all cables with the EBB36 mod on Stealthburner.
One base with screw holes, one without. The lid should be orientated so the lugs don't push on the capacitors. 0.20mm, shouldn't need supports.
Just a simple mount for a PG7 - fits CW2 Used it with the BTT EBB 2209/2240. May fit other boards aswell. 1x heat set insert (Standard Voron) and 2x M3x8 SHCS needed.
I'm re-designing it because I needed a 14mm CCW inside.
This router base will assist you in routing grooves at an equal distance from the edge of a board. I used two screws, washers and handles that I had on hand. The screws are ¼ inch 20.
Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…
Same setings as Voron parts. It needs supports for print!
AC shroud to convert the one-hose AEG AC to a two-hose AC for better efficiency. Fits a 125mm intake hose. Also includes the 3D scan of the back.
This simple bookmark features a representation of Great A'Tuin and a quote by Terry Pratchett. The design of the Great A'tuin was inspired by the works of Paul Kidby. More of his works can be found at: https://shop.paulkidby.com/featured/
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
Cyma Glock 18C Tac Rail and 14mm CCW Barrel
BETA The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. These…
Forget flimsy CAN wires free flying around your Voron's enclosure. This is the mod solving the issue the way Bambu Labs X1 does it. Check this mod in action here: Recommended print settings Extrusion width: 0.4mm, forced Layer height:…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
EN: Boardgame pieces for the Discworld: Ankh-Morpork These are faithful copies of wooden figures for a board game that no longer exists today, which expired due to the revoked license. If you need to replace a piece or would like to…
an easy way to connect two hcw panels or just to have two inserts
Printable parts for your Original Prusa CW1S Curing and Washing machine. Print instructions PrusaSlicer's default PETG 0.2mm presets. For the HEATER FLANGE CW1S_ASA part, please use Prusament ASA filament as it has a better thermal…
Remix to add a drag chain mount. For Switchwire with EBB SB2240_2209 CAN bus adapter, specifically to allow a drag chain for use with Beacon bed probe rather than umbilical. This is a new mix that has not been tested yet! There are two…
Dewalt DCW210 Cordless Sander to Festool Cleantec Adapter This adapter allows a Festool Cleantec dust extractor to be used with the Dewalt Cordless sander (O-Ring also required). This sander is generally a good design with the exception…
Adapter that allows the protruding parts to be milled into a plane. The adapter snaps into place on the original base. Assembly and disassembly is a matter of seconds. At the end of the adapter is a spherical handle that helps stabilize…
Circle jig for Dewalt DCE600, DCW604, which is easy to snap onto the contact surface of the original base without any tools and can be milled with even small circles. It is necessary to screw the M5 screw without a head into the sliding…
This is a thread cap (protector) for airsoft rifles (AEGs). It could be screwed on the threads whenever you are not using suppressor or flash hider. It has 14mm CCW thread (left-hand). Total height: 11mm Diameter: 25mm The idea behind…
Extendet 12mm thread, I had problem with durabilyty in this place. Slightly shortened 14mm thread, didn't fit my tracer unit. This is my first work with threadet think in 3d programm, so don't except something excellent.
BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… then I modified it for better…
This is mount for the Dewalt Router DCW600. This can be mounted with screws or pegboard. The second model is for the pegboard clips. -- This prints on its back with supports (for the peg clips), brim is optional. Category: Organization
I got the idea from Novritsch Modular Suppressor V2. Made it to fit in the holster with a pistol. This is 10cm long and it's threaded in 14mm CCW. Holes for M3 bolt and nut to tighten it well in place. This is for looks only! I printed…
Here is a quick edit I made to use a Mosquito Hotend with the final release version of the Voron Stealtburner with CW1. I have been using another Mosquito Stealthburner mod that was based on the beta 3 version but decided to mod the final…
a replica of the Transformers CW sunstreaker gunsword for transformer toys. Best printed on an SLA/DLP 3D printer. Check out all of my transformers guns! Transformers CW sunstreaker gunsword - https://www.thingiverse.com/thing:3693685…
Airsoft Muzzle device inspired by the infamous Muzzle Device used on the XM177E2. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.15mm Layer Height 100% Infill If you need anything, feel free to…
last update 24.02..2025 Hello and welcome to the second iteration of my modular silencer with different skins. If you like you can tip me via paypal: https://paypal.me/crazYm1nd ---------- description This is a complete refactoring of the…
I haven't printed this yet but I'm hopping the friction will hold this in place so it can be removed from the arrow I'm using (edit) V2 files are intended for the bottoms to be formed around my arrows with a heat gun Print Settings Rafts:…
Hello there, As i really liked my SRS i have tried my luck with Gas Sniper, a classic, WELL G96 (ARES AW338 Compatible) which have some non-standard solutions for todays airsoft standards. First model which i have designed is simple 14ccw…
Updated the design to work with the “twirl” version of the HGX gears. Support is needed for the pocket that the motor sits in. Print quality is on par with Galileo 2 or better Twirl gear:…
Forget about the thin wires flying freely around the body of your Voron. This mod solves the problem the way Bambu Labs X1 does. The mod includes all the files needed for assembly and installation. Recommended print settings Extrusion…
This model is modified from KayosMaker canboard mount https://github.com/KayosMaker/CANboard_Mounts It is design specialised for mounting BTT EBB36 canbus board on Voron Stealburner CW2 and can still use dragchain for cable management…
