145 modeli
Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…
3d printed case to DIY build your own dipole antenna. It will fit up to RG316 coax size pigtails.
All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…
This winder is a little more Versatile than other iterations, subjectively. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller Toroid for a Choke. Pictured is the dipole as…
Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal
Look at https://dl2man.de/linked-dipole/ for detailed instructions and look at the Video for seeing me setting it up, doing all the measurements and some QSOs. All files Printed from PETG in 0,15mm Layer hight, no supports needed. Make a…
Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to…
Very small dipole antenna. Great for backpacking, POTA, SOTA, etc. Three different base connectors for SMA, BNC and SO239 connectors. Connect 2 lengths of wire to the base and clip on the connector. Search the Internet for “Dipole…
I really liked the Dipole / Inverted V Balun Antenna Centerpiece from kaliway , but it was a bit of an overkill for a FT140-43, so here's a redesign. Features: smaller, thinner and more compact (should be less than 5-6 hours to print)…
I wanted to build a link dipole for Parks On The Air operations that would be lightweight and easy to put up. I designed these pieces around 22 gauge stranded wire and a bulkhead mount SO-239 connector. Use whatever connector you want on…
This is center piece for making dipole antenna. Uses SO259 connector for antenna attachment. Provides holes for fixing antenna wire and contact screws. I cut it from plastic on CNC milling machine. It may be 3d printed too but pay…
Links with labels for 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m and without label to build a linked dipole antenna as described in multiple places (e.g. here or here ). With the wire I used (simple 1.5mm² wire from a local hardware…
This antenna dipole center insulator is an amalgamation of several different designs I have found. It is intended for temporary QRP work. Your results may vary if used in a permanent application. I use PETG at 0.03mm for production and…
Wire Winder made by the "Ham Radio Dude" I had 4 hole SO239's on hand, and wanted to use em. Perfect for a Dipole or EFHW Fits an FT140-43 Toroid. Any and all use must credit the original author, “Ham Radio Dude”
The size and number of insulators (with labels) can be easily modified in OpenScad model which is included. All files in ZIP archive: OM2JU_Linked_dipole_Insulators.zip Quick building instructions of complete Linked dipole are in…
The idea is that by arranging a dipole into a horizontal ‘V’ shape, the radiation pattern will be directed skywards in a figure 0 (zero) pattern. This will be optimal for satellites travelling in front, above and behind the antenna. Since…
This mount uses threaded 1/4in aluminum rods as antenna elements. The holder is stuck to the window frame with 3m command strips. EDIT 12/6/21: Added an UNTESTED Dual-Band version by request. Fusion 360 files included! Print Settings…
This is a very efficent dipole antenna for Lora network. It is tuned for 868MHz frequency more information here : https://github.com/CongducPham/tutorials/blob/master/Low-cost-LoRa-IoT-outdoor-step-by-step.pdf Print Settings Notes: print…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/d459KBbGIG8 Category: 3D Printing
Universal Doublet (dipole) Centre is designed to facilitate installation of a doublet antenna with the 450 Ohm windows-line feeder onto a 10m Spiderbeam mast. It allows to quickly deploy and rewind the antenna in the field. The…
WORK IN PROGRESS - near final revisions. *Please leave feedback on this tutorial and the prints. It will only help to improve the overall model. I am a big fan of open-source and improving upon established products and standards. I am…
A simple dipole center structure with a hole for a BNC panel mount connector and space for a T80 torroid 1:1 balun. For field use. Category: Electronics
A holder for a generic antenna that you can buy cheap on ebay or anywhere else. This auxiliary bracket is for fixing the antenna as a V-Dipole for receiving broadcasts from satellites noa at a frequency of 137 MHz. The antenna should be…
Linked dipole links. Use your preferred method to connect the wires (I use alligator clips). These can also be used as end insulators by passing the rope through the hole in the center. I printed in PETG at .3 Draft settings, and they…
This is a linked dipole link which can be used with any 1.8mm OD wire. This includes the spool of DX Wire that I have here, as well as the 20 gauge silicone wire that BNTechGo sells on Amazon. I also used 2mm banana plugs to connect the…
My off center fed dipole is 264 feet long and the center piece broke. I designed this to be more robust to allow the connections as well as rope and hardware for hanging in the trees.
2 SIZE AVAILABLE, for QRP or 100W~ simple box for matching unit SOTA POTA portable operation. could be used to make a Dipole, EFHW, EFRW antenna. radio plug into the BNC, the Antenna into the Banana plug. item required: -4mm banana plug…
This is a simple spacer for 6 wire cage antennas. The 3mm holes should be fine for 18 ga insulated wire. After threading the wires through and drawing them taught, position the spacers and put a drop of super glue where each wire passes…
Feed point and end insulators for a 20m DIY Dipole Kit. It is designed for RG-58 but RG-8x should work too, coax to be ziptied to it to secure it hanging vertically. Wires just tie to the holes on each end. Printed in PETG, although PLA…
This hub can be used to build a rigid V dipole using a CB mirror mount and two 17 foot telescoping whips. The antenna can be adjusted to operate from 20 meters through 2 meters. I modified this design from the hub used with my Savvy Yagi:…
Insulators used in-between different band segments in building a multiband linked dipole. credit to KosherPorkRinds
Inspired by the original, this print allows a dipole to be fitted to a 15mm or 20mm boom. Uses M3 hardware to secure 10mm Al tube (1mm wall thickness), and M4 hardware to secure to 15mm or 20mm boom. I print with supports for the base…
Wire insulator for wire antennas, dipole etc. Category: Hobby
This is a simple mount to create a 120° V dipole antenna, using the popular M10 telescopic rods. Here is a general parts list, your mileage may vary since I brought some components at a local hardware store: Telescopic rods:…
You are doing me a big favor by clicking the Like button :-) Good antennas are expensive. This it will cost you around 15 euros and works super. I use it at 86 - 87 MHz as a transmission antenna with 50 Watt Power. It has an excellent SWR…
My custom designed slinky antenna. People have been making slinky dipoles for longer than i have been around, but i decided to design some parts to make assembly easier. I included a picture of the exact slinky i used. I bought mine from…
This is a center T for a Dipole/Doublet using window line. I printed it with 3 perimeters, 6 top and bottom layers, 30% infill Category: Electronics
Přináším další verzi VHF UHF dipól antény vyrobenou Z prvků staré TV antény. Průměr prvků je 6 mm. Délka pro 2 m (170 MHz) je 2x 39,5 cm, pro pásmo 70 cm (445MHz) je 1x 29 cm, samozřejmě lze naladit změnou délky pro požadované frekvence.…
I liked the separator by DO7HAR but i felt like it wasn't wide enough. So i created from scratch very similar separator which keeps cables 25 mm apart. It is tight enough that it won't fall or move around the cable. I used it with 2 mm…
Layer height: 0,4mm Supports: No Print with cable holes for PL connector on bottom.
Simple dipole insulator for ham radio (Small wire antenna). I used 26awg. Enjoy. Tell a friend, or don't. Category: Electronics
This plug is used to secure the toggles of the new Buddipole injection-molded guying ring.
A bracket to create a dipole antenna using 1/2" (5/8" (16mm) actual OD) copper pipe, would work with EMT also. Designed to be bolted together will work with M4 bolts, or #10-24, or #10-32 bolts. The hole in the main body was sized for a…
2mm wire 4x M3 screw Pro výpočet délky drátu použij dipol kalkulačku z internetu. Za pomocí analizeru doladit na požadované frekvence. To calculate the length of the wire, use the dipole calculator from the Internet. Tune to the desired…
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
This is a centerpiece to build an dipol with symetrical feed line @ 450 Ohms (like CQ 553 flex wire). I recommend to use the new version (NG) with the improved and strengthened relief. It is still designed for the CQ 553 flex wire but may…
Heltec V3 specific dipole mount. Not finished but works amazing !
Parts needed to make a dipole antenna inspired by https://www.printables.com/model/235528-dipole-antenna . I have used 10 mm diameter copper pipe and cut to length using SWR meter (NanoVNA) according to the wanted frequency. From the wall…
This is a mounting plate for a dipole antenna. this design is sized for an FT114 toroid. it uses M4 screws and a BNC chassis mount connector. zip ties are used to hold the toroid in place. the BNC cutout is sized for a BNC bulkhead…
The purpose of these files are to provide a means of mounting two aluminium rods to a length of 32mm waste pipe. Why? To form a dipole antenna for the reception of NOAA satellite data on the 137MHz band using an SDR receiver. Basic…
This is a 3D-printed center insulator for building a dipole antenna. Two versions are included: one for an SO-239 connector and one for a BNC connector. The enclosure has room for a 1:1 current balun. I used an FT140-43 toroid for mine…
These holder/labels work as accessories to the QRP dipole antenna center and end insulators. When cutting a wire to make the two elements of the dipole antenna I like to cut about 12” longer than expected to allow for tuning. After lacing…
Possible Antenna Conifgurations: 1. Tripod based vertical antenna (perfect start for a POTA Performer) 2. Tripod based dipole 6-20M 3. Raised dipole 6-20M (using a standard painters pole) The raised dipole uses a standard painters pole…
work in progress. mount to take the Buddipole mast with the ½" pipe thread (versatee mount) to a standard tripod mount (¼-20) to mount the arrow antenna. the adapter will need a ¼-20 bolt added.
3d Printed Dipole insulator Light-weight and ideal for temporary portable operation with some wire and zip ties. Recently tested and used with a 80m doublet used portable during a 24 hour contest. Print Settings Printer Brand: RepRap…
Elément diameter : 4 mm for 15 mm boom. use aluminum for the elements and brass for the dipole. Fix with nut and M4 screw. PETG. 100%. Perimeter x 6 . This design remains experimental errors are possible. Particular attention will be…
Covers for elements for antenna production https://www.printables.com/model/838846-covers-for-elements-for-antenna-production
I change the base to fit a PVC tube of 32mm in diameter. I have included the fusion file if you need to customize it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.32 Infill: 25%…
Centerpiece for a dipole antenna, 5mm coax cable (RG-58) and various rod sizes (4,5,6mm). There is plenty of space inside for the wiring. The generous size also makes it pretty sturdy and has no problems to support long/heavy poles (2-3…
This is a remix of the cap from the original model to give a little more surface to handle the cap. The original model uses a reverse thread, and this one does as well.
Wire antenna coupler for making resonant dipoles or possibly delta antennas. This coupler is made compact and not designed for use with a balun or choke unless placed in line with the SO239. Designed for use with heat-threaded inserts.…
I like HamRadioDude's wire winder design, but wanted band numbers on the winder to indicate what it's tuned for. Haven't printed this yet but you may want to add minor supports at the bottom for the numbers.
Mini dipole antenna base with BNC. I designed this for QRP operations with my IC-705 radio. Uses 4mm screws and has an optional 5mm hanger hole and wire strain relief holes for 20 gauge wire. I use 22 gauge teflon coated wire. Also…
Foldable 120° V-Dipole for NOAA weather satellite reception. Can be mounted on a tripod for a portable setup. The halves are connected by two M3x20 screws. For the dipole I used two ~54cm long 4mm brass rods. The dipole is fixed to the…
Overview Lightweight and durable dipole link insulator designed specifically for Wago 221-412 connectors. Ideal for portable amateur radio setups (SOTA, POTA, field days) to quickly connect or disconnect wire segments and change bands on…
this is a small centerpiece for a portable dipole or linked dipole. it has space for a balun core and the cables can be directly winded on the centerpiece. there are also some spareholes to hang some other stuff on it. pictures will come…
Antenna mount for V-Dipole used for 137Mhz NOAA APT reception. Antenna original design by Adam 9A4QV. Use 3/8 rod or copper tube for antenna elements. Print with PETG material. 15-20% cubic infill. Units are mm.
printed with PETG-GF using stock settings on a centurion carbon printer the are just under a inch in diameter at .978" and just over 1-1/2" long at 1.576" the holes are 1/4" .250" you can scale it larger or smaller. happy hamming 73 from…
This is a center structure for building dipole antennas using window line or ladder line as the actual antenna radiator. I made it to use a BNC panel mount connector for a coax feedline. It could be modified for an SO-239 using most…
This is an adapter for a favorite dipole antenna insulator. The insulator is designed to take a .73" pole. This adapter fits into the insulator and adapts to fit a the bell end of a piece of 21mm (3/4") NEMA electrical conduit. I'll…
Center part of the doublet antenna which i made from 2 mm wide old military cable. It has holes to secure the cables with zip ties. I used it together with my line separator…
Please share this with other printing groups, forums, etc. This winder is a little more Versatile than other iterations. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller…
This is a very simple dipole for UHF frequencies. I designed it to hold 70cm elements, although I've also built it as a 1.25m antenna. I haven't tried elements for 2m band yet, I believe they would be too long. I have another design that…
Dipole center insulator v2. Added clearance for a nut on the backside of the SO239 connector. Reinforced support.
The oryginal antenna of Frsky R9m was too bad to use it, so I used the coaxial wire of this antenna, replaced the active and passive element and used this T joint to make a new antenna - well adjusted for 868MHz. Category: DIY
868Mhz / 915MHz Antenna Dipole cover and mounts To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament…
This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…
Features Variable frequency, user NanoVNA for fine tuning, Horizontal or vertical polarization, 3/8" (large tripod screw) for H and V, 1/4" (small tripod screw) for V polarization, dipole-base-your-mount for your convenience - use any…
simple dipole end insulator for ham radio antenna building
ELRS Dipole antenna holder. I have a BETAFPV Nano Rx, but it should fit any dipole antenna. The distance is 18mm in between. The fit is as snug as it gets , it requires some patience to insert the antenna ends. Print Settings Printer:…
Simple base for 137MHz NOAA satelites V-dipole antenna https://www.rtl-sdr.com/simple-noaameteor-weather-satellite-antenna-137-mhz-v-dipole/ Tripod holder : https://www.printables.com/cs/model/541352-v-dipole-tripod-holder
Distance element for a fan dipole with four wires of DX Wire FS2 or similar (hole diameter is 3.5mm).
A remix adding hole for wooden rods and wire on top of it. Made as I didn't have aluminium rods and it was easier to solder the coax cable directly to the antennas. Made it easier for me to tune the antenna length to fit the 137 MHz, than…
This is a UHF/VHF dipole center mount that will deploy on a SotaBeams mast.
center support for dipole, windom wire type antennas for ham radio, drip guard is not necessary, just extra protection from water getting in the coax connector. Thanks 73 KE4ARI
A small housing to create a DIY Dipole Antenna for a Stratux (ADS-B or FLARM) out of a DVB-T antenna cable.
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
a support to hold the antenna perfectly at 120°, perfect for receiving weather satellites such as NOAA and Meteor. The holes in which the antenna fits have a diameter of 7mm
UPDATE, I hung 15 pounds with this. Seems legit M5 threaded post and a S hook. Inspired by something called "Cord Lock" at Ace hardware. As you can see, you can use it for strain relief OR for a end insulator on a dipole, efhw, etc.…
A basic first iteration dipole areal frame designed for high altitude balloons Print instructions Category: Hobby Summary A basic first iteration dipole areal frame designed for high altitude balloons
A simple dipole housing with no balun. The body has 5 holes in the bottom for mounting an SO-239 connector with an additional 6 holes surrounding that (3 to weave each element in and out of for strain relief). The cap has a hole through…
Designed to use an extendable paint pole as a center support for a dipole. Prints in two pieces to maximize strength and simplify supports. Requires two #10-24x1 machine screws and nuts plus one SO-239 connector. The idea is the two…
This is an enclosure for an end fed half wave dipole antenna transformer. It is sized for a Fair Rite 264351002 ferrite core and includes a post to hold the core securely. For 3-30MHz, the transformer is a 14 turn transformer wound with…
This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber
Printed on Bambu P1P with PLA-CF. Hole on the bottom fits a ¾ PVC pipe for a mast. There are holes too attach hooks if you'd like to hoist the antenna into a tree. The elements are made to fit this Telescopic Wire Reacher Disc Golf…
My Dipole centre broke so I made this a a replacement.
V-Dipole Antenna 120 thread ¼ 20 PETG
This is a 3D Printed Assembly for using 6mm Aluminum rods (hollow) as a Robust Dipole Antenna. Apart from the Print you will need: 1x 1/4 Inch Insert 2x M3 Screw 2x M3 Nut (for the inside of the Print) 2x M3 Washer 2x M3 Compatible Spring…
This is a center hub for a homemade wire dipole, using a SMA plug (TE 1052422-1). Drill the 4 holes to 3mm (M3), solder in the wire, use a M3 bolt to connect a ring lug (RS 0433028 ).
Tripod holder for https://www.printables.com/cs/model/526982-noaa_v-dipoleantenna-base
