Wyniki wyszukiwania: drye

Sortowanie

Liczymy pasujące modele…

P
PrintablesChrisfu

Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===

I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…

Pobrania
3468
Polubienia
1008
Ocena
4,91
P
PrintablesRainer

Socks dryer

I hate hanging up socks. This makes it a little better.... For the hexagon look, simply set the bottom and top layers to 0, perimeter 3. Hexagon infill 15%. For more stability it can of course also be printed normally.

Pobrania
2329
Polubienia
728
Ocena
4,93

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Pobrania
2272
Polubienia
332
Ocena
4,94
P
PrintablesTickTock

HarvestRight Freeze Dryer Tray Stacker

[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…

Pobrania
1874
Polubienia
137
Ocena
4,8
P
PrintablesHaprog

Filament dryer extension for SilverCrest dehydrator

This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…

Pobrania
1661
Polubienia
254
Ocena
5
P
PrintablesHenning

Bottle Dryer

Simple bottle dryer in three sizes. The largest one needs a printing height of 30cm! Print instructions If you want to clean it in your dishwasher, choose PETG, ASA or ABS. No supports needed.

Pobrania
901
Polubienia
142
Ocena
4,95
P
PrintablesDarkmoon

Sunlu S2 Filament Dryer PTFE Tube

Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…

Pobrania
873
Polubienia
138
Ocena
4,96
P
PrintablesStefan Pasch

Bottle Dryer

A simple bottle dryer to plug together and save space in the closet. Based on the v2 design of https://www.printables.com/model/382554-bottle-dryer-system-v2 - only slightly higher with wider feet, so that even larger bottles (including…

Pobrania
692
Polubienia
185
Ocena
5
P
PrintablesHannahL

Hair Dryer & Straightener Holder

Printed in M3D matte Lavender PLA on my MK3s+ at .2mm on a .6mm nozzle. Attribution: Hair Dryer and Straightener Holder created by drabisko.

Pobrania
657
Polubienia
57
Ocena
5
P
Printableskilldaclick

Sunlu S2 Dryer PTFE filament guide, horizontal orientation

Sunlu S2 Dryer PTFE low friction filament guide - no drilling, no glue There are many PTFE filament guide adapters for the dryer but this one: Guide filament in most natural way from the roll to the PTFE tube. In fact it is in parallel…

Pobrania
456
Polubienia
75
Ocena
5
P
Printableshhes

SUNLU S2 Dryer Net Merged Halves

Same old SUNLU S2 Dryer Net, but with no glue required.

Pobrania
402
Polubienia
48
Ocena
4,92
P
Printables3D KIMBA

PolyDryer Splitter Mod – Dry Two Spools at Once

PolyDryer Splitter Mod – Dry Two Spools at Once Thanks to this mod, you can dry two spools at the same time using a single PolyDryer unit. This design is ideal for users who own only one dryer and want to optimize their drying process,…

Pobrania
387
Polubienia
243
Ocena
5
P
Printableselectrodraco

PTFE tube connector for PolyDryer drybox

This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this…

Pobrania
339
Polubienia
61
Ocena
4,83
P
PrintablesRobagon3D

Mitten & Boot Dryer for Floor Vent - NO SUPPORTS

This is an over engineering mitten and boot dryer for use over a forced air furnace vent measuring 14 inches by 6 inches (350mm X 150mm). Each tube can be turned on or off and has a unique air flow path forcing air out into the mitten but…

Pobrania
271
Polubienia
52
Ocena
5
P
PrintablesNeva

Shoe dryer (no supports needed)

no supports needed, just use some brim

Pobrania
260
Polubienia
100
Ocena
5
P
PrintablesJRT3D

The Recreator3D.com Community Bottle Dryer

The Recreator3D.com Community Bottle Dryer Prints on a 200x200 Bed Uses a 40MM Fan for Air Circulation To Power the Fan, Use a 5 Volt Fan and Wire it into a 5 Volt Power Cord for a Phone Charger or equivalent. Just make sure to use a…

Pobrania
243
Polubienia
55
Ocena
4,75
P
PrintablesJOGIAREA

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silika / humidity + temperature Sunlu JAYO dryer S1 + silica

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…

Pobrania
241
Polubienia
53
Ocena
4,8
P
PrintablesMLS

Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner

Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…

Pobrania
232
Polubienia
45
Ocena
5
P
PrintablesKorA

eSUN dryer holder for Prusa MK3S or MK4S

Pattern from the website: https://www.thingiverse.com/thing:4904219 Drawn for eSUN eBOX Lite dryer. I've added cutouts for buttons. Printing time for both parts is 12 hours. EDIT: After several days of use, I noticed that I made too large…

Pobrania
222
Polubienia
31
Ocena
4,83
P
PrintablesMecky1963

Basecap dryer

Anytime to find a way to dry my base caps with rolled to a ball towels, I decided to create a basecap dryer in Fusion. So my best second half helped me to wrap some aluminium foil around my head to get the right size. The dryer is made…

Pobrania
192
Polubienia
7
Ocena
5
P
PrintablesHappyKatz

Maytag / Whirlpool Washer & Dryer Knobs

These knobs can replace both the large and small knobs on a Maytag or Whirlpool washer and dryer. Backstory: My large timer knob cracked on my Maytag dryer after only two years of use. On removing the broken part, I find that the knob was…

Pobrania
173
Polubienia
9
Ocena
5
P
PrintablesMasterChiefMike

Silencer dryer / Trockner Schalldämpfer

dryer for a silencer (rifle) to avoid damage caused by humidity. drawn by Autodesk Fusion 360. Printed in PETG with 30% infill. You also need 4 ruthex inserts and 4 screws M3 x 12mm. For the fan i used this one from amazon…

Pobrania
170
Polubienia
4
Ocena
0
P
PrintablesSpiegl Philipp

Fursuit Head Base dryer

Fursuit Head base dryer, designt um einen Kopf nach der Benutzung wieder zu trocknen. Material: PETG 8 Stk. Einschmelzbuchsen M3 4 Stk. M3 x 40mm 8 Stk. M3 x 10 mm 4 Stk. M3 x 25 mm 8 Stk. M3 Stopmuttern 80mm USB Ventilator Fursuit Head…

Pobrania
152
Polubienia
44
Ocena
5
P
Printablesrelei

Glass Drinking Straws Dryer

Glass Drinking Straws Dryer, no glue, no screws. Easy to print.

Pobrania
147
Polubienia
31
Ocena
5
P
PrintablesAme

Hair dryer concentrator Remington

I designed this hair dryer concentrator to replace the original one. The exact model is Remington AC3300 but it should be compatible with any hair dryer with 42,8mm connection diameter

Pobrania
138
Polubienia
8
Ocena
0
P
PrintablesAli_Kaa

Hair Dryer Holder Föhnhalter Wall Mount Wandbefestigung

Hair Dryer Wallmount printed in PETG. 75mm Diameter

Pobrania
121
Polubienia
14
Ocena
0
P
PrintablesZbyněk Král

Filament Dryer Adapter for Gorenje FDK500GCW

The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…

Pobrania
114
Polubienia
19
Ocena
5
P
Printables3Dietzmann

Filament dryer GCODE for your printer!

ON YOUR OWN RISK! In general you need heat to dry filament. Only silica gel etc. is not enough to move the moisture out of your filament. If you don't have a dryer like me, you can use your print bed for drying. You can use a small box…

Pobrania
105
Polubienia
4
Ocena
0
P
Printables3DGREEN

XL Parametric Dehydrator Filament Dryer

Modeled like the original to print top side down, with supports only in the window for the sensor.

Pobrania
101
Polubienia
18
Ocena
5
P
PrintablesHank

Heat Gun / Hair Dryer Holster

A holster for heat gun or hairdryer that prevents the hot nozzle from touching the table or holster. Attaches ridgidly to table.

Pobrania
94
Polubienia
29
Ocena
4
P
PrintablesSHR3D.eu

Replacement belt tension pulley for AEG tumble dryer.

Replacement drum belt tension pulley for AEG tumble dryer. The original pulley is not equipped with bearings (only an embedded metal roller) and therefore jammed over time and caused the belt to tear. I therefore fitted the new pulley…

Pobrania
82
Polubienia
9
Ocena
5
P
PrintablesMartin B

SENCOR SFD 790WH - DRYER 3.0

This is my third improved version of the dryer accessory. Whole model approx only 150g. Dryer 3.0 - Four quarters - better fit on the dryer. Version 3.0, you can stack them and dry several filaments at once. Recommendation: Layer height -…

Pobrania
70
Polubienia
10
Ocena
5
P
PrintablesPnoreck

Sunlu FilaDryer S2 Spacer

I found a couple of spacers for the Sunlu FilaDryer S2, but they were all too loose and/or too big. Since the spacer opens the whole top of the box, it doesn't need to open it up too much. I tried a couple of spacers, and most of them…

Pobrania
70
Polubienia
7
Ocena
5
P
PrintablesDaniel Montero

ERYONE Snail M2 Dryer Holder for Prusa MK3S

This is the updated version of the Sunlu Dryer to use with the ERYONE Snail M2 filament dryer for the Prusa MK3s frame. Suggested settings: PETG for strength, 0.3mm layers. Infill: 15-20% Perimeters: 3 No supports

Pobrania
59
Polubienia
7
Ocena
0
P
PrintablesGregg Sanford

Dehydrator Filament Dryer (REMIX Addon for Rosewill RHFD-15001)

Preface These models are intended to be used as an “add-on” to @SJB4127 's original files for the Rosewill RHFD-15001 Dehydrator (Amazon not linked as their links break constantly), specifically two 90° walls in their section titled “…

Pobrania
53
Polubienia
10
Ocena
0
P
PrintablescoffeeFueledDiy

Samsung Washer/Dryer Knob Mount DC64-03186A

NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesRPK

Hair Dryer Fan Radiator Mount

EN: The system was intentionally printed in 2 parts to reduce the use of supports to a minimum. Due to the shape, the entire object could not be printed in one without a myriad of supports, so it was split into 2 parts. The joint consists…

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesOtty_Skipper

IKEA Tisken rod holder , Shower curtain Clothdryer

Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG

Pobrania
45
Polubienia
8
Ocena
0
P
PrintablesGatesy

Sunlu S4 Filament Dryer Stand / Build Plate shelf

As I have multiple build plates for different materials, spares and even textured build plates rather than keeping them in a draw i decided I wanted them closer to the printer to ensure that i will use the different plates as they are so…

Pobrania
39
Polubienia
6
Ocena
0
P

Sunlu S2 Filament Dryer Bracket

The original bracket by @Ibot_3D was a great fit with the Sunlu S2 filament dryer, but I couldn't rely on the magnets to hold the bracket on the cart. It was too easy to knock the dryers onto the floor by brushing against them (or perhaps…

Pobrania
31
Polubienia
5
Ocena
0
P
Printablespaw3D

Automatic Exhaust Fan - Sunlu S2 Filament Dryer (Remix)

Purpose While being a great filament dryer, the Sunlu S2 misses a fan exhausting the damp air from the inside. The exhaust fan presented here is a non-destructive accessorie that can simply be fitted into one of the lid's two filament…

Pobrania
29
Polubienia
9
Ocena
0
P
PrintablesRPK

Hair Dryer Fan Radiator Mount Remix

EN: I noticed that the hairdryer liked to position itself perpendicular to the radiator, which takes up space. I therefore added 2 studs to the ring part to hold it in the position parallel to the radiator (to the wall). The other part(s)…

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesDennis Judd

Dryer ball shelf

This is a remix but I put a lot of tweaks on it. I wanted something that could hold multiple sized balls but also attached to the wall near by. The STL is a solid piece that I split using the cut tool in prusasclicer 2.6 with 2 pins to…

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesRyan Roehnelt

Spiral glove dryer

Another glove dryer, trying to make it more open and airy. The bottom is not the strongest - significant vibration from the plate movement on the Prusa Mk4 when printing the upper layers. This is more of a “can I do it” model than a…

Pobrania
27
Polubienia
6
Ocena
5
P
PrintablesDhubado

Small Glove Dryer with Desiccant Inside

CAUTION! Broken desiccant beads can fit through the slots. Be aware. Material: PLA Infill: 15% Layer settings: -Tube, set to 0.3 w/ variable layer height, adaptive only (see image) -Base, 0.3 Supports: -Tube and cap, only the locking tabs…

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesIwog

Dryer for flutes

It just need few screws and threader (I used M3)

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesExtra Fox

Filament Dryer Magnetic Brackets

I planned on having at least two filament dryers on top of my printer enclosure, but I wanted a way to make sure they couldn't accidentally be knocked over. So I built some brackets that hold the dryers through the magic of magnets.…

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesRPK

Philips bhd501/00 Hair Dryer Radiator Mount

EN : The system was intentionally printed in 2 parts to minimize the use of supports. Due to the shape, the entire object could not be printed in one without a myriad of supports, so it was split into 2 parts. The interface consists of a…

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesKiwibloke

Hairdryer Wall Mount for Toughbuilt ClipTech Hub

Overview This is a wall mount for a hairdryer that uses the Toughbuilt ClipTech hub mounting system. You will need one of these: https://www.printables.com/model/1521234-remix-toughbuilt-cliptech-hub-wall-mount Printing Print the linked…

Pobrania
18
Polubienia
7
Ocena
0

FIXDRY filament dryer box extension - remix / Rozšíření FIXDRY sušičky filamentu - remix

FIXDRY filament dryer box extension for 8 cm spools - V2. Rozšíření FIXDRY sušičky filamentu pro cívky šířky 8 cm - V2.

Pobrania
18
Polubienia
1
Ocena
0
P
Printables3Dprintfun

Filament Dryer Spacer For Letting Humidity Out

Lots of filament dryers recommend keeping a small gap to let out humidity, but also lots of them don't have any way to make a gap. This is a simple solution for that problem. I designed it in FreeCAD, so if anyone wants to customize it I…

Pobrania
17
Polubienia
8
Ocena
0
P
PrintablesGdalya

Food Dehydrator Filament Dryer Tangle Guard

I've been fairly happy with my filament feed system that I converted from a commercial food dehydrator. Sometime, a new spool will get a little slack, and filament will wrap around the center axel underneath the spool on the way out of…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesDiabetic Jedi

Bottle Dryer Extender

I made the extender by sinking the original in to the build plate and then increasing it's size. Next, I took the original and used it as a negative volume to empty out the inside so it can just friction fit on top. I did find that it was…

Pobrania
13
Polubienia
1
Ocena
0
P
Printables8kappa

RAW GLASS FILTER TIPS DRYER

I designed this things for you so please leave a like or a comment if you don't like something and i'll be very happy to se your makes so don't forget to post them. :) Want a much cooler version? take a look at this one! -->…

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesrejnok

Outdoor cloth dryer center joint (replacement part)

I think: 10% infill, 4-5 perimeters and 2mm top and bottom solid layer thickness can be enough, but you can try lower values for cheaper print, but result may brake in your situation (STL model is upsidedown)

Pobrania
11
Polubienia
1
Ocena
0
P
Printablespueckler

Passive filament dryer / Filamenttrockner passiv

(English description below) Der Filamenttrocker dient zur Lagerung von Filamentspulen. Er wird nach dem Befüllen mit Silicagel in das Kernloch der Filamentspule eingelegt. Das Hygrometer zeigt den aktuellen Feuchtigkeitsgrad in der Box…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesComrade

brush dryer

duplicated and merged in slicer, shrunk the height of one side to add a slant for drying bristle down.

Pobrania
9
Polubienia
4
Ocena
0
P
PrintablesJaMi

Clothes dryers - outdoor - intermediate piece to the holder

Laundry dryer - outdoor - spacer for holder (filler for 40 mm diameter pipe)

Pobrania
8
Polubienia
2
Ocena
0
P
Printablesbmontini

Eibos Easydry PrusaXL Side Mount (Fits above Sunlu S4 dryer)

Eibos Easydry PrusaXL Side Mount, Fits above Sunlu S4 dryer on my brackets I also designed. Works with or without Prusa XL Enclosure. Requires 2 3030 nuts and holes are sized for M4x16mm hex socket cap screws My Eibos has the extended box…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesAbílio Costa

IKEA SAMLA filament dryer

Adapter parts to use an IKEA SAMLA box directly on a food dehidrator, like the SilverCrest one (but there are other brands for the same dehydrator). Why? You get a 4-roll filament dryer for a cheap price! You can have multiple boxes of…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesHenk

CORE One + as a filament dryer

Turn your Prusa CORE One+ into a filament drying chamber I’ve created a free set of nine experimental G-code files that let the heated bed and regulated chamber of the Prusa CORE One+ run as a filament dryer for 4, 6, or 8 hours.…

Pobrania
4
Polubienia
2
Ocena
0
P
Printableseds_3d_shop

Slim front side AMS (and Hydra) narrow side corners silica dryer pod/drybox with snap fit lids for Bambu Lab AMS

UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…

Pobrania
13 524
Polubienia
751
Ocena
4,96
P
PrintablesQuattrox

Bottle Dryer System

check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…

Pobrania
9264
Polubienia
4490
Ocena
4,85
P
PrintablesLolcio

Soap dish, Sponge dryer with drainer. INDX gcode included

The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…

Pobrania
8928
Polubienia
1476
Ocena
4,94
P
PrintablesDET-Man

PolyRoller - Smooth Rolling with KID'nR for PolyDryer

I really like 🥰 the PolyDryber boxes: The overall concept is great, the form factor is perfect, it has a cool design, …. but there are some design flaws that need to be fixed. 😉 But don't worry, you can do it! 😎 Remark: I designed the…

Pobrania
7997
Polubienia
142
Ocena
5
P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Pobrania
6403
Polubienia
360
Ocena
4,89
P
Printablesdietrich

BambuLab AMS Dryer pod with indent for AMS fix

Remix of the box to have an indent that makes it slide in place even with installed AMS reinforcement clips. For me no resizing was necessary. AMS reinforcement clips The AMS reinforcement clips were introduced by BambuLab as a quick…

Pobrania
5932
Polubienia
530
Ocena
4,89
P
PrintablesVoltex

Sunlu FilaDryer S2 Improvement Wedge

So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…

Pobrania
5744
Polubienia
827
Ocena
4,9
P
PrintablesSTprinting

Bambu Lab AMS Dryer pod w/ snap fit lids

I remixed the box to have a snap-fit lid and vertical holes for less bridging. I added a new version that takes inspiration from the Galactic Empire. (I was bored and have not had a chance to test print)

Pobrania
5173
Polubienia
615
Ocena
4,95
P
PrintablesQuattrox

Bottle Dryer System v2

check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…

Pobrania
4806
Polubienia
1429
Ocena
4,85
P
PrintablesDET-Man

POLYmount - The Ultimate PolyDryer Snap-In Wall Mount

Tired of broken wall mounts? Meet the wall mount your PolyDryer actually deserves! If you're like me and love your PolyDryers but found yourself frustrated with the original wall mount being difficult to use (and worse, breaking over…

Pobrania
4621
Polubienia
124
Ocena
5
P
PrintablesJal Shah

Bambu Lab AMS Active Filament Dryer

A simple solution to keep filaments dry even when they're stored in Bambu AMS for a long time. While AMS does store filaments quite well with airtight container, I just wanted active drying solution implemented as I have been running all…

Pobrania
4271
Polubienia
267
Ocena
0
P
PrintablesDET-Man

openGrid Snaps for POLYmount and PolyDryer

Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps ! Two snaps attach to the upper and lower mounting points, perfectly centering…

Pobrania
3763
Polubienia
28
Ocena
0
P
PrintablesExtrutim

Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box

I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…

Pobrania
3688
Polubienia
1870
Ocena
4,96
P
Printablesdteng

Desiccant Box for Creality Space Pi Filament Dryer

This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…

Pobrania
3563
Polubienia
579
Ocena
4,93
P
Printables3DPrintSOS

PolyMaker PolyDryer - Double Barrel Mod

I LOVE the modular design of the PolyMaker PolyDryer. However, one thing it couldn't do over my previous setup was dry two filaments at the same time. Well, now it's totally possible thanks to the Double Barrel Mod . Print this mod in…

Pobrania
3263
Polubienia
644
Ocena
4,91
P
PrintablesQuattrox

Bottle Dryer v4 (expandable)

check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…

Pobrania
3006
Polubienia
501
Ocena
4,93
P
PrintablesTeachingTech

Spherical port for filament dryers - Open source and parametised

Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…

Pobrania
2744
Polubienia
772
Ocena
4,75
P
Printablesdteng

Desiccant Box for Creality Space Pi Plus Filament Dryer

This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…

Pobrania
2652
Polubienia
475
Ocena
4,87
P
PrintablesEDGE_OF_3D

PolyDryer Desiccant Funnel

A quick printing funnel to aid in filling the desiccant holder of the Polymaker PolyDryer Dry Box. Balances the holder when filling, quick to print, oriented for proper printing, print in any material, no supports needed.

Pobrania
2644
Polubienia
534
Ocena
4,95
P
Printableshexvolt

PolyDryer Extra Desiccant Container

Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…

Pobrania
2545
Polubienia
446
Ocena
4,96
P
Printablesgwg

PolyDryer Air Exchanger

Most 3d printing filament dryers have a fundamental flaw: they heat the filament and pass air over it, but they are a closed system with no venting, so moisture escapes only by accident. With single piece dryers, fixing this is intrusive…

Pobrania
2539
Polubienia
615
Ocena
4,97
P
PrintablesBarney123

fruit and vegtable washer and dryer

fruit washer and drier. small and large. can also do vegetables.

Pobrania
2501
Polubienia
537
Ocena
4
P
PrintablesFerCuru

ELEPHANT DRYER

A little friend for the kitchen! happy printing ;) You should also try v2: https://www.prusaprinters.org/prints/43601

Pobrania
2454
Polubienia
630
Ocena
4,92
P
PrintablesSJB4127

Parametric Dehydrator Filament Dryer (Up to 10 x 1kg Spools! )

Update 2023.11.18: I've added a Fusion 360 paramaterized model of the side walls, so everyone can mix and match the design to match their specific food dehydrator. It has been only teste for certian combinations, so the model still may…

Pobrania
2382
Polubienia
714
Ocena
4,91
P
PrintablesShane Finn

Water Bottle Dryer

This is a remix of scmake's dryer https://www.thingiverse.com/thing:4579574 . I loved the aesthetic of the original but found it was a little unstable with a bottle fitted and scaled down prints for small bottles were too fragile to be…

Pobrania
1911
Polubienia
311
Ocena
4,92
P
Printablessteve5092

Wall Mounted Holder for Dyson Hair Dryer ( Dyson Supersonic )

Wall Mounted Holder for Dyson Supersonic Hair Dryer. Need to prepare some magnets, please refer to the following URL link for specifications.…

Pobrania
1890
Polubienia
242
Ocena
5
P
PrintablesFurdTerguson

SUNLU S1 Filament Dryer M10 PTFE Guide

Mashup of Jevermeister's https://www.prusaprinters.org/prints/116779 and EveningNewbs' https://www.thingiverse.com/thing:4855279 PTFE Guides for the SUNLU FilaDrayer S1 filament dryer. I wanted a PC4-M10 fitting, and Jevermeister's…

Pobrania
1818
Polubienia
242
Ocena
4,94
P
PrintablesPolymaker

Airlock Dock & Stacker for PolyDryer

The Airlock Dock & Stacker slide onto the lid of the PolyDryer™ Box and are held with a friction fit. The airlocks can be press fit into the dock and are also held in place with a friction fit. The Stacker version allows you to stack…

Pobrania
1762
Polubienia
392
Ocena
4,93
P

Snapmaker U1 – PTFE Tube Radius Guide (Dryer to Feeder)

CZ: Tento držák PTFE trubičky jsem navrhl jako řešení pro bezpečné vedení filamentu ze sušičky do podavače Snapmaker U1. Umožňuje vést PTFE trubičku v kontrolovaném radiusu, takže se neláme, nekrčí a nezpůsobuje zvýšený odpor při podávání…

Pobrania
1729
Polubienia
258
Ocena
5
P
PrintablesGeorge42rus

Parametric Sock Dryer (Solidworks)

To change you need to use Solidworks 2022 or later

Pobrania
1570
Polubienia
715
Ocena
4,89

Air Gap Spacer For Sunlu S2 Filament Dryer

If you own a Sunlu S2 filament dryer, then you probably know that the lack of a fan prevents the humid air from being properly circulated out of the box. One of the simplest ways to get around this is to crack open the case a bit during…

Pobrania
1402
Polubienia
152
Ocena
4,97
P
Printablessquidball

Second Desiccant Container for PolyMaker PolyDryer

Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…

Pobrania
1399
Polubienia
184
Ocena
4,53

SUNLU Dryer S2 Mod

This improved version is designed to prevent the filament from falling off the roller when the filament material is exhausted and to roll well without resistance. Some parts of Multiple Mechanism Auto-Rewind Spool Holder have been…

Pobrania
1390
Polubienia
238
Ocena
3,75
P
PrintablesRon

SUNLU S2 Dryer Net

Two models for SUNLU S2 Dryer that can hold variety of things needed to be dried such as renewable silica and more. Thinner model is as wide as standard filament roll of 1.75mm 1 kg. Wider model is as wide as it can be, to fit nicely…

Pobrania
1365
Polubienia
410
Ocena
4,9
P
PrintablesIanryeng

Scrub Daddy Dryer

Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…

Pobrania
1360
Polubienia
347
Ocena
4,93
P
PrintablesEric T

Sunlu S1 Filament Dryer Lid Support

Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…

Pobrania
1335
Polubienia
192
Ocena
4,91
P
PrintablesFumanseano

PolyDryer PTFE Adapter 6mm O.D. to 4mm O.D.

Adapter plug to convert the 6mm inlet on the PolyDryer to fit 4mm OD PTFE tubes. Now it's possible to directly feed from the dryer with a fully constrained reverse bowden setup. I have included the step files, so you can modify it to suit…

Pobrania
1324
Polubienia
199
Ocena
5
P
PrintablesDrake
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1267
Polubienia
100
Ocena
4,67
P
PrintablesTsukemono

Polymaker Polydryer Desiccant Holder

Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…

Pobrania
1219
Polubienia
227
Ocena
4,83