291 modeli
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
A keycap puller for doing keycap puller things >:) if you want a tighter puller you could scale it down just a bit and it might work a bit better 0.4mm nozzle 0.28 layer creality ender 3 v3 se
This model is pretty self explanatory. Give the side a few taps to force ash to fall down into the infill trap. Increasing infill density will trap the ash better but be harder to shake the ash down into. Must be printed with no top…
Why is there yet another Internal spool mod? For one simple reason: This one doesn't require a panel spacer And since the space inside is very limited it uses a latch to hold the spool from the inside, this was tested with elegoo…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 The video shows a box for a different caliber, but the principle of operation is the same File names are shared across the…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 The video shows a box for a different caliber, but the principle of operation is the same File names are shared across the…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
This is something I whipped together with Fusion. I am just beginning, and I feel like this is a good imitation of IKEA. You should be there when in makes the first layer, because if the holes fail, it will give you a very bad day...
The Totally Not Over-Engineered Wall Hook Why use a passive wall hook when you can have a mechanism? No floppy middle state here. A true magnetic bistable latch drives the hook open or closed with a deeply satisfying snap . Smooth,…
⚠ Be aware this model has not been printed and tested as complete part yet. ⚠ I reverse-engineered the Delonghi ECP front panel as best and close to the original as i could. The original intention was to then modify it for mounting a…
Trigon Core: Engineered Modular Storage System Trigon Core is a scalable workspace organization system designed with a focus on structural rigidity and industrial design aesthetics. Unlike standard pegboards, this system utilizes a 12mm…
Works if you have two coat rods - STEP file can be edited to change the distance. Lots of holes to configure where the hooks are. I used 8 which gives you 16 hangers. Printed in PETG.
a very simple lid for a regular soda can to let you store your already opened can in the fridge without tasting like mac n' cheese later.
really good fidget to play with it is noisy. also make sure you super glue the thumb into the socket
Based on a nice project by adafruit, I made a really overengineered bike light for my niece and nephew.
I wanted a heat-set insert press, but couldn't find any that matched my requirements: Used as few “special” hardware bits and bobs as possible. Be as compact as possible. I don't have lots of storage room, so something compact, but easily…
Here i made a over engineered Spool holder for 1 KG spools. I made mine from a steelplate 50mm*125mm*5mm and two 20mm square tubes with a length of 100mm and welded on the steelplate. Give it a nice black coating. With the steelplate and…
Honestly at this point it can double as a weapon, not exactly sure where the original is from or where its applied but if its what youre looking for be sure to leave a like.
Please reference the drawing for assembly, if you have any questions please ask and I will be more than happy to assist! Enjoy! Make sure you print 4 x Organic Drawers, all other components only require one piece. For the pencil/pen…
After several iterations of stress testing, I've created a super strong ramp that can be dropped, thrown against the wall, smashed with a barbell, and supports a barbell loaded to 5+ plates per side (495lbs total). In order to support all…
I designed a smaller, faster-to-print calibration cube that tests overhangs with its 45-degree overhanging edges. I've also added a version of the cube with no overhangs, if you prefer. 10mm x 10mm x 10mm Enjoy! Please leave a like if you…
Someone in the Virtual Boy Fans Unite group on facebook said his lenses were cracked. I didnt have any extras to send, so within an hour I'd removed the best original lens I had from one of my two working Virtual Boys, and I reverse…
I got tired of the constantly scuffed fingers or dropped inbus wrench, so I designed my own slightly overengeneered model of the inbus wrench handle (allankey). The primary goal was to make the handle grip well and also offer reasonable…
So... At first I just wanted to make a simple monopoly with more street groups and started to think about the best way to do it. I spent a long time thinking and planning etc. but then I had the idea of making the whole monopoly modular!…
Needed some small wrench for soft tightening parts in wise, yeah, i could make it simple, but why? This looks better and if i will brake some part of it, i can only print the one broke part. Hope someone will use it as much as me. You…
Custom adjustable holder for Saeshin Strong 210 spindle. Both pieces need support for printing. Nozzle 0.4mm layer 0.2mm Infill 100%. The older version breaks in some situations so I've added an M4x17mm flat head screw and m4 nut to…
I made a wide version of the heater extension (and some remixes) of the (Un)Original Prusa Drybox. It is largely to help folks add various hardware and have an easier time at wiring. It is also built to optimize for arbitrary extensions.…
This is an elevator for the upper part of your bambulab printer. This piece provides you with different functionalities, advantages and will solve or avoid many problems: The PTFE will enter the extruder more vertically, without curves,…
The cup model includes a false bottom where weight can be added mid-print to help with stabilization when removing scrap vinyl using the weeding tool. Print Instructions: Pause the print just before the first top layer of the inner…
This is a phone holder designed for the iPhone 14. You can use it with devices that are not thicker than 8 mm.
It holds 26 stamps, which was the amount they got from the HEMA package. They are round, fit snug and the lid closes quite well. It is a long print, all in all 10h of print time in 0.25mm Layers with a 0.4mm nozzle in PLA on the Prusa…
GOEWS website https://goews.ws/ GOEWS Reddit Group https://www.reddit.com/r/GOEWS/ The Greatly Over Engineered Wall System (GOEWS) is a modular storage solution combining the flexibility of the Gridfinity system with a durable, modern…
Designed to grip different brands/models of ink sample vials.
I was making Fursuit eyes for my Fursuit, and I decided to make the some over-engineered) And here they are For magnet parts you need 44pcs of 2x3x5mm magnets 10pcs M4 hex nuts 10pcs M4x8mm screws Attention! If you need magnetic mount,…
Resized to my needs, external size 95.5x70x46 (without hinges and locker) Removed internal stiffening ribs Made holes in the bottom Added locker with place for magnets 2.5x5
A keycap puller for doing keycap puller things >:) if you want a tighter puller you could scale it down just a bit and it might work a bit better 0.4mm nozzle 0.28 layer creality ender 3 v3 se
During the design I was focusing in having the most amount of movement possible using only 3D printed parts and M3 bolts and nuts to improve durability and smooth movement , however is to complex and present several problems that will be…
Reasonably fast print. I used a 0.4mm nozzle and 1.75mm PLA filament for a length of around 3.5m. Overhangs on the sides are 40 degrees, card is 0.9mm thickness, most external radii are 2mm. Radii on the inside are designed to grip the…
The bathroom drain filter, overengineered to create a vortex and drain the water from the shower quickly
The ESC Mounts I made and the sliding battery tray I modified to work for my application. The esc mount is for a SonicWake 36 V2. You will use it as a template to use to cut a 2mm thick carbon fiber plate and then mount it to your boat…
A massively over engineered Hex piece holder (wall mounted) that can be built up on a carousel system. Knurl around the base so your fingers don't get too tired when selecting the hex piece you want. x 4 ball bearing holes (optional) so…
If you wish to be a distinguished gentleman, this is the bubble pipe for you! Created at my brother's request. My goal was to try and make a bubble pipe that could produce larger bubbles, instead of the standard heap of tiny bubbles that…
Do you get bored of most finderscope holders's screws scratching your green laser casing but you don't mind because it doesn't affect the functionality of the laser, but it still bites the back of your mind? If yes, then you should make…
With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…
I printed this in PLA with 3 layers & 15% infill. It seems very strong. As a bonus, I'm able to slot side-cutters & a bed scraper into the bracket itself (at the front of the printer).
I needed a model for designing my workspace with my new Prusa XL with Enclosure, but I couldn't find any model ready to use. I found a great model of Prusa XL by @Kapplion_80283 and added a model of Original Enclosure. If you need other…
Mousetrap car made for a physics project Has a max distance of around 400ft when going in 11ft circles in my house I lost, got beat by my brother by around 4in (we both got stuck on a doorframe) Mousetrap has a extra wind for more power…
Print in PETG! PLA parts may crack when pressing them into the bearings. Thanks to download & ❤! I needed to borrow my wife's soft tape measure, and found it wadded into a ball in her box of sewing items. This model is my solution to the…
.. see photo :) required really good cooling, used PETG for more flex. Filament ist PETG Silver from Extrudr Print Settings Printer: Kossel Delta Printer Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: i used support for the…
Find more details in the blog post: https://bananowe.it/en/blog/system-3d-hanger/
Find more details in the blog post: https://bananowe.it/en/blog/system-3d-hanger/
Find more details in the blog post: https://bananowe.it/en/blog/system-3d-hanger/
If you're moving or need hassle-free shipping, this is for you. Protect your stuff
I wanted to fit all of the expansions into the base box for Disney Sorcerer's Arena and was surprised to not find a suitable option out there. This is my first insert design and, it's possible I went overboard. My kids and I have already…
All of the files are pre-oriented for your convenience! protect the control board from the environment. protect the control board from theft (with the lock attachment) All the parts can be 3d printed on so that NO ADDITIONAL HARDWERE…
This is likely over the top thing, but if you like challenges, read on! Note: My first ever print of this model is in an office environment for a year already, and still works lika charm! So don't be affraid to try it! Printing…
Overengineered Ambidextrous Glue Spatulae. Ergonomic, accurate, and easy to steer, especially when working fine spots with A/B epoxy or silicone. A close friend, a professional mountaineer, told me that they worked great in repairing…
Introduction Colorprint is awesome until you get the bill for 10+ different filament spools. So I designed a sample spool filament system. This is also a great way to use up small quantities of left over filament, just put them onto a…
This model is pretty self explanatory. Give the side a few taps to force ash to fall down into the infill trap. Increasing infill density will trap the ash better but be harder to shake the ash down into. Must be printed with no top…
Once I saw the contest, I instantly knew I wouldn’t touch grass for the next month, which is why this overcomplicated pet feeder became the ultimate beast in providing nutrients to your pet. It uses an Arduino Nano, a NEMA 17 stepper…
This is a ridiculously over-engineered gift box in the shape of a pressure cylinder for a precious item / gift - the cylindrical void inside and bolt sizes (and number of bolts) can be configured in a wide range using the OpenSCAD file.…
Really simple funnel designed to fit the brilliant slug trap by @MaxT. https://www.printables.com/model/916130-slightly-over-engineered-slug-trap Since it won't need to stay outdoors, you can print it in whatever material you have left…
Remix of japonicki's Boruit V20 flashlight bike horder adjusted for the Boruit V15
I struggled with transporting my minis when playing Warhammer 40k so i sat down and deigned my own solution. As usual, i overengineered… Result: a stackable, modular system that should fit most Warhammer 40K minis. Simply print the box…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://www.buymeacoffee.com/maxt ---------------------- Print with 3-5 walls, 30% infill, fuzzy skin for better grip (0.8 point distance, 0.3 thickness) This Fridge Handle represents a robust and ultra-durable refrigerator handle ,…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. although this is an injection molded part, but apparently it is absolutely printable
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
I slightly over engineered a silica gel drybox solution for an IKEA Smala V = 22 l storage box. The main goal was to design a flexible system that might be used as a filament feeder system in the future. For the main purpose of drying…
I bought the Alforsit. It was too small. I made it bigger. Additionally, I made it compatible with 3D printers. Instructions: Stick the small part into the curly part. Just like a puzzle. A small amount of adhesive is advised. I did not…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
BluBracket is the Super Scalable and Over-Engineered 90-Degree Mounting Bracket! It can be used for a variety of cases including shelving and construction projects. BluBracket can be printed in any size and with any material and infill…
This is my interpretation of DRU the genetically engineered Alien statue from the book The Defender. I printed this at 300% larger than the files I uploaded. The small version is good but I like the detail on the larger version. from the…
Tandem Maze Two 🧩 Travel Games This model is a new entry in my Travel Game Series. All my travel games have the same size. That makes them easily stackable. They are small enough to put them in your backpack etc. Because of the design you…
An over-engineered 10mm microphone arm with clips for 6mm cable. The arm is very strong and can hold a lot of weight. It can also be used to hold any item you like if you design a suitable holder for it I printed it with ABS 0.2mm. I…
I hate having to use two hands to unplug USB cables so I made this mount to hold my new 10 port powered USB hub: I screwed it to my monitor stand so I jab plus in and out without the unit moving. It does require a few low profile socket…
My cat, Washbear, is very affectionate. He demands constant attention (which only leads to attention). When I'm working on the computer, he will jump from my PC to my lap, invariably hitting the PC power button and killing whatever I'm…
Description: This is my go-to French cleat bin for a clean, modular workshop wall. Designed with internal geometry that reinforces load-bearing corners, honeycomb panels to shed weight, and overhang angles that require no supports. The…
🎯 Ultimate 3D-Printed Kendama – Engineered for Strength & Style! Tired of kendamas that snap on first impact? This design solves the failure point – weak layer adhesion – with an innovative split-body construction that prints flat for…
Since I had played with a gimbal mount lately I though some kind of handle would be nice, and that reminded me of control sticks on a game controller or remote control, and of fidget joysticks - so I added a spring and this is the result.…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Best to print as seen in the image. this phone case includes a stand that is print in place and can has a snap fit to attach to the back of a phone. the phone case also includes some buttons that you have to slide between the grove and…
This is an over-engineering keyboard button presser. It uses a FS90R micro servo and a servo tester to allow the speed to be adjustable. Components: FS90R micro servo Servo tester USB C female conector Stylus Ball bearings for weight…
I wanted something for the spices that I could build upon and I needed it to be able to connect to other parts of the assembly like lego There are four size options: Small - Fits most UK spices Large - For slightly bigger ones, it removes…
This is the middle cylinder portion I made to finish out the project this is remixed from.
Genetically engineered catgirls for domestic ownership badge for multicolor printing. Does not need any special settings.
