1446 modeli
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been enjoying making nooks and places for my shrimp and fish to hang out in. Caves are a great addition and really expand the unused space of the substrate.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
A simple holder for the Ikea Skadis system to organise thread reels
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Updated to v.1.5 . Reinforced locking cone. This side is completely flush. On the opposite side, the tube is extended by 0,5mm. Spare sewing machine thread spool to rewind thread from big one (for overlock machine) to home sewing machine.…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
Holds 3 sizes of containers for sewing needles in a 1x1 gridfinity square. Fits 1 6.5mm, 3 5.5mm, and 1 3.5mm box of needles. Sizing is based off what we had in the house, if you need a different assortment or all of one size feel free to…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Sewing needles are not only very pointed, they are also pretty small. Looking for a save container for these little bastards? Here it is! Easy to print, has three pockets for needles of different sizes and locks wenn closed. So no needle…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Introducing the "Sewing Tool: Thang and loop pressing bar"! This innovative tool seamlessly combines the precision of the "That Purple Thang" with the functionality of the Loop Pressing Bar . The "That Purple Thang" excels in maneuvering…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Updated to ver. 1.3: Each pin base is more reinforced, according to suggestion in the comment. I need a box for all of my sewing thread spools organized. As my spools are of 500 m sizes, bought at Lidl, no one of the Aliexpress organizers…
Wydruk około 7,52 €–9,19 € nettoWstępna wycena jednego wariantu
My organizer box for my sewing machine bobbins. It can store 30pcs bobbins of max DIA21 mm and 13 mm wide. It is not transparent like cheap Chinese poly carbonate boxes. I think it is not drawback, because there is text on outside of the…
Wydruk około 2,64 €–3,22 € nettoWstępna wycena jednego wariantu
Use this tool to insert and remove a sewing machine needle. Features Holds a needle aligned for insertion Allows you to raise the needle to fully seated position Works with all universal domestic standardized needles Works with all sizes…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Was pretty unhappy with my current storage solution for all of my thread and decided to do something about it. I designed these spool holders to be just small enough to hold standard Gutermann spools but found it could hold large…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Une autre boîte de rangement pour boîtes à aiguilles de machine à coudre de marque Schmetz cette fois ci. Dérivée de la boîte pour aiguilles de marque Klasse. Le fichier Freecad est disponible et modifiable. Another storage box for…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Une autre boîte de rangement pour boîtes à aiguilles de machine à coudre de marque Organ cette fois ci. Dérivée de la boîte pour aiguilles de marque Klasse. Le fichier Freecad est disponible et modifiable. Another storage box for needles…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sewing machine spool and bobbin clip V2 L with thread clip - Nähmaschinenspule und Spulenhalter V2 L mit Fadenhalter
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter to use larger cone spools with a (standard?) 0.25" diameter sewing machine spool holder. It features a tapered conical shape to match the spool, and a larger base so that the adapter doesn't ride up or get stuck during…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
You'll need: one break-of segment of a 9mm, 30° utility knife blade and some strong double sided tape or better: adhesive foam pads. These work perfectly. The blade segment is captured in the print, so you'll need to add a print pause in…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a baseplate for Gridfinity system to screw it down to a wooden surface using small wood screws. I modified the screw holes with chamfers to allow usage of little countersunk wood screws 2,5x10. It is a remix based on…
Wydruk około 4,19 €–5,13 € nettoWstępna wycena jednego wariantu
Nähfuss-Halterung für BERNINA und SKADIS. Drei Versionen: - normal - grössere Füsse - normal mit extra Halter für den Fuss 3A. → Siehe Bilder *** Sewingmachine foot holder for BERNINA and SKADIS. Three versions: - normal - bigger feets -…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can choose from two versions of the wings (with or without internal supports). The body is the same for both. You need: rubber band skewers a lot of glue Recommended printer settings: Wings without internal supports: Brim 0,2mm…
Wydruk około 9,36 €–11,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit diesem Werkzeug kann die Brüheinheit des Siemens EQ 9 Kaffeevollautomaten bewegt werden, was die Reinigung und Wartung vereinfacht. Es ist keine Unterstützung nötig. Google translator With this tool, the brewing unit of the Siemens EQ…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am new to 3D printing and wanted a project for my first newly purchased Prusa MK4 after printing the provided examples. My wife started sewing recently and she wanted a small box for storing her sewing bobbins. I used SketchUp Free to…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
print settings: PLA works fine! Happy printing :)!
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
This clamp holds fabric while you hand sew. Then you can slide the clamp out from under the threads and pull them tight. Clamp the next section and continue. The comb helps to keep stitching evenly spaced and helps prevent the fabric from…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Every sewing project needs a different color, and for every color a new coil have to set up. I just lost the overview wherefore I made a simple carrier to keep them organized somehow. It works for standard sewing machine bottom coils (at…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are two types of flower-shaped sewing practice boards for children. They can practice safely with a blunt sewing needle. Finished products will be beautiful handcrafted gifts or cute home decorations. Dimensions: height: 150 mm…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
I made this for my wife who does quilting. She will use it to keep her thread in when we are traveling. The changes are parametric and will change the thread spool posts as the size of the box changes. There are three parameters that can…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Print in whatever you like (I prefer transparent materials for this). You'll have to provide a 1.5mm thick piece of wire and press it through the holes to give the foot holder something to hold onto.
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updated to ver. 2.0: The spool pin, added hollow hole to reinforce rigidity of it. The washer inner dia increased to 9 mm. On one of my Singer 431G sewing machines, spool pins are cut and glued by help of glue gun. The already original…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
My Wife wanted to buy those Donut weights from a content Creator, but they were out of Stock, so I made her even heavier ones. Also iterated on the design. If you use one of those fancy build plates with a pattern make sure to get a good…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
držák na 24 cívek, 12 spodních a 12 vrchních nití, já to mám na oddělení stejných barev pro snadnější používání. tisknuto bez podpěr / prints without supports
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Bosch Siemens Neff Coffee Maker Brewing Unit 11014117 part. When the brewing unit is blocked, this slider thing could fix it. Some pictures attached.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Too much of sewing is pinning and measuring and I get bored easily! I got tired of making double fold straps so I made a giant bias tape maker instead. This is for 90mm/3.5 inch wide fabric strips. This was made using the customizer by…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
Elna Supermatic bobbins have a groove on the inside of the cylinder which means normal bobbins don't fit on the top winder. The original metal bobbins are solid on the bottom and have 7 holes on the top side, which allow you to see the…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Someone I love very much was an amazing designer and sewing guru, just wanted to do something to remember them today and ran across the contest. Don't forget to hug your loved ones while you can.
Wydruk około 0,72 €–0,87 € nettoWstępna wycena jednego wariantu
Created the protection box for Airwaves, because after a few days in my pockets the package always was busted and the gums were floating around in my pocket. Problem solved now! Print instructions Printed it with my MK3S with PLA without…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Holder for chewing gum box (Orbit/Extra, Airways). Fits to IKEA Skadis pegboard. Print it with supports and don't forget to share a picture of your print.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I noticed that with continued use the wedge shape of my wife's sewing machine (model Janome 4300 QDC) foot control was being pushed against the wall under the worktop and the movement caused it to make marks on the decorated wall. What I…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Egg for darning socks, which can be opened into two screwable parts and contains small parts essential for sewing. Material used: PLA CRYSTAL. Only the thimble is in TPU.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Bobbins for sewing machines are far to expensive if you own a 3D-printer and have the opportunity to make them by yourself. And as if the price is not deterrent enough there are countless different models of those bobbins even within one…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Díl inside doporučuji tisknout s podpěrou, na ostatní části není potřeba. rozměr: 100x50x20
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Helps you hide your chewing gum from nosy friends. Case is designed for standard chewing gum (20mm x 12mm x 6 mm). However it can also be used for smaller chewing gum. Dimensions of the case: 20.5mm x 25 mm x 46.5 mm
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Use these tools to add seam allowance to your sewing pattern: either increase the existing seam allowance or add more seam allowance. Sizes Available is both a set of metric and imperial tools. Metric tools range from 5mm to 25mm in 5mm…
Wydruk około 1,30 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Design : I design the part in Fusion 360 similar to the original part of my NECCHI Q132A sewing machine. There are 2 things to be considered that are key fort a correct installation and fitting. The bottom part must fit the 6mm square…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Replacement for a broken blister boxes.
Wydruk około 6,72 €–8,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The lower holder is very difficult to remove. This ejector helps here Der untere Halter läßt sich nur sehr schwer entfernen. Hier hilft dieser Ausstoßer It would be nice if you post your make. Thank you
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The sorter allows convenient storage and sorting of small items. The individual tiers can be stacked and the upper part of the sorter can be closed with a lid. Updated. Added a lid with holes, for mounting the top handle.
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Wanted a box to store the foot-pedal of our NECCHI Q132A sewing machine. I found one here https://makerworld.com/en/models/121716-footpedal-box-for-singer-heavy-duty#profileId-130981 but wanted to have one with different size and a door…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
I used a 6 mm metal rod I had lying around and redid the round part as well to make it fit well… editable flies included in case you need to adapt in some way…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu
I needed a quick replacement for a Pfaff Variomatic 6085 til the new aluminium one arrived. Fits perfect.
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
¾" panel holder for screwing or nailing panels together.
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sewing button PrusaSlicer logo for the fan ^^ Dimensions Size : 17mm Height : 3mm filament : less than 1g For best results Print with PrusaSlicer at 0.10mm HIGHDETAIL check ironing enabled…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
One of my first 3D printing challenges. My wife had a sewing gauge that the clip (red part) had worn out on. You can buy them for nearly nothing but it was an interesting challenge. With it being small I could iterate very quickly and see…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
A replica of the Skyviewing Sculpture (artist: Isamu Noguchi) created using the measurements by Branko Ćurgus (and the remarkably beautiful “Noguchi number”). (Note: You can see the real sculpture looking through the model in the photo.)
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
This tray is suited for storing AXE YAMAZAKI's sewing machine named "Perfect Sewing Machine for Parenting" accessories. This tray can store its AC adapter, foot pedal, and some sewing threads tidy, and protects the sewing machine needle.…
Wydruk około 8,79 €–10,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Customizable Trellis with a central post for support and attachments Ever wanted something to hold up your plants? Don't have any plants? Me neither! Print Instructions and tips: All parts were designed to be printed without supports .…
Wydruk około 10,82 €–13,22 € nettoWstępna wycena jednego wariantu
My wife started to use old, flat magnets that were previously attached to the back of shopping lists from the fridge as a means of keeping loose pins, sewing needles etc from getting lost down the side of the chair or on her workbench. I…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Frames for fan covers or similar things Adjust the size to suit your needs. Glue in your own bars / grill.
Wydruk około 0,80 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spare part of broken cog in sewing machine. Printed in PLA. Use a vise to seat on the metal part (tip - print two cogs, place together from the teeth side, squeeze in the vise).
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA / PETG Layer Height: 0.15 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional Background: Many sewing machines come with some felt pads (usually red) that…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A single print sheath with a hinged flip-top lid that gives ordinary chewing gum bottles a clean, minimalist look. No assembly, screws, glue or tools required. Please don't scale this model. The snap fit is tuned to the standardized…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Protects from items rubbing up against belt or falling down hole I modeled this for my Cobra Class 26. The blue painters tape is covering the holes where I removed the thread winder Supports necessary, sorry 13mm height above table with…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
I'm glad to introduce you the latest version of my cantilever tool box! Take all the necessary tools with you Easy to use and store Print-only design, no metal parts or glue required Clip and snap assembly Rigid and durable PARAMETRIC.…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
Template for equal distances on the stitch.
inspired from commercial product, I tuned it to suit gutterman bobines but can fit with a lot of brand. to use in combination with a clip https://www.printables.com/fr/model/249327-pfaff-sewing-machine-bobbin-cover/comments/1177551…
Each holder holds five spools of thread with a diameter of up to 35 mm. Slightly larger diameters are fine if mixed with other spools of a smaller diameter. Edit August 2026: I added a longer version that also has room for a bobbin. If…
This is a modified cable chain end mount for the Ender 3 V2, allowing the chains to be mounted so they run nicely parallel to each other and the printer. I've also added all the other bits you need to print a cable chain for the Ender 3…
This cave is the perfect addition to your aquarium. Just press it against the glass of the aquarium and cover it. The fish will have a hiding place and will be beautifully visible. An excellent trick for your ancistrus, who often breed in…
Different sizes and types of Basic Simple buttons for your needs. 100% Infill For strength 25mm, 20mm, 15mm, 12mm Holes are 2.5mm No supports
CAD file . The supplied models are separated based on meter width, in this case 19mm and 21mm, close to the most common widths, at least from what i could find, i had a 19mm. These values are the maximum meter width that will fit. If you…
Printed in PLA I have used 50-100 infill and found both work fine
Allows you to use large industrial spools of thread on a home/non-industrial sewing machine. Usage Place the holder on the right side of the sewing machine as shown on the third photo, Insert thread from the spool to the hole on the top…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
The latest 3D-designed Sewing Edge Ruler is a tool tailored for utmost precision and flexibility in sewing projects. Engineered with metric measurements, it features detailed markings for both centimeters and half-centimeters, catering to…
List of buttons Geometric buttons : round , square, triangle and hexagon Japanese video games buttons : acorn, leaf, mushroom and star Dimensions of the stl file width : around 17 mm Height : 3 mm Thread Holes : 2 mm Print Settings…
YouTube Video ( https://youtube.com/shorts/rRwxUmyBnUs ) Overview This model has a top portion that holds one end of the sewing tape measure and a bottom portion that can rotate relative to the top portion. The top portion has a ring that…
A special holder for large spools, such as those for sergers/overlocks or bobbin thread. If you want to store smaller spools of thread, I have two other designs available: Modelled to fit the pegboard snugly, consider scaling down in the…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I like the template from @DavidHolecko_1339235, and…
This is a fully 3D-printable foldable box for sewing accessories. Beside 3D printer and about 1650g of filament you only need some superglue to fix it all together. Outer dimensions are 160x170x70mm for the smaller boxes and 320x170x70mm…
A miniature model of a sewing machine with a drawer which can hold needles. I recommend printing the BASE part so that the right side, the side where the turning nob is, touches the build plate (I already exported lit ike this), this way…
Does not require any infill. Original model with Ø 28mm, rescale in your slicer to fit your own tape measure.
This is loosely based on https://www.thingiverse.com/thing:2349048 , but I didn't like the overall print quality. After I saw a similar, foldable sewing aid somewhere to buy I constructed this sewing aid with 3mm, 4mm and 7mm (folded)…
Cantilever Tool/Sewing Box Remix (PLA-Optimized, Modular Joints) This remix of the popular parametric cantilever box features a key modification for easier, faster printing and improved stability, especially for PLA users. Key Features of…
This extension can be printed with PLA in one or two colors to improve readability. A basic metric ruler is needed, the extension need to be glued aligned with the 1 to 7 marking and the first 7 centimeter of the ruler. This pattern…
My wife is always misplacing her small thread cutting scissors. I made this simple easy-to-print model so that she can store her scissors in a sheath on her sewing machine right were she needs them. The sheath can be mounted to the side,…
To scale it in PrusaSlicer, add cylinder shape, make it the same size as your finger and scale the thimble until you're satisfied with the fit.
I designed a collection of sewing tools, which I find super helpful when I am sewing. Hump jumpers Use to easily sew over uneven layers and bulky seams. Designs: - Small hump jumper (or jean-a-ma-jig) - Big hump jumper More information on…
This improved sewing gauge now allows to print thimble actually fitting your finger (measure the width of your thumb) There is closed model for protection from needle, as well as open for long fingernails. Thimble is then press fitted…
Manual reel for sewing tape. Print instructions Sewing tape reel. Printed on translucent green and black PTEG. The sewing tape in the pictures is 120 inches long. No support material needed. The black line on the middle of the reel was…
Prostě knoflíky :) Just good old sewing button.
Embark on your next adventure with the ultimate companion for the unexpected: the Emergency Travel Sewing Kit. Housed within a rugged cylindrical tube, this compact sewing kit holds the tools you need to conquer wardrobe woes wherever…
This is a seam guide I made for my wife. She has a Brother QC-1000 but it should work for others. It uses four 8x3 magnets, glued in. It has a shallow notch cut out to clear the plate screw. There is a hook on the end to help keep it…
This is a simple But effective chewing Bone toy for your lovely pets print Instructions : PRUSA SLICER ! #1 : go to infill setting and change the “ Fill Pattern ” to Gyroid #2 : change the infill density to 2% or 5% #3 : go to Layers and…
Tested with 0.4mm nozzle / 0.2mm layer height but I imagine other combinations would work. I had build plate adhesion issues, so I'd recommend using a brim . You'll need to print 1x base tier, 2x mid tiers, 2x top tiers, 2x lids, 8x short…
No more fiddling with resting your phone against random objects when bored on a flight of cafe after realizing you don't have a phone stand with you. Credit-card sized and ultra-thin to fit in any wallet. This version can hold the phone…
For parts like the nacelles just mirror the parts in your slicer to get both sides. Hardware used: -Matek H743 Wlite -Matek m8n gps -Iflight Xing2 1806 2500kv motors -Corona DS939MG servos on tilt, Racestar DS5601MG servo on elevator…
For my wife and her sewing, She likes to keep both her thread and her bobbins together and close by. I found this origin design by Kevin Mathew Thomas which was 90% of what I wanted. Another user, PJCrowther had remixed the spool holder…
I remixed the design so a 150 cm (60 inches) could fit in, which was not the case with other versions. I also added a little handle to rewind it faster. Since I printed a couple of those (as gift), the ones that I put a tiny bit of grease…
![Sewing machine spool & bobbin clip {Fadenrollen Klipp} [V2] (size:= M; L) // more powerful inner clip effekt](https://media.printables.com/media/prints/900668/images/6887835_da70503f-32a6-473b-9e4c-5a68c096e3aa_526eaf59-464b-4738-b9ee-614b38f723b5/2024-06-02_23h26_07.png)
![#0132 Sewing Pitch Template [3 versions]](https://media.printables.com/media/prints/809978/images/6321700_e3bc384d-6096-465c-b6cd-77099b1b2a16_9c1a9c83-a377-4e7d-b2f1-accad0ea64a7/20240324_131011.jpg)
