Wyniki wyszukiwania: fingertip

Sortowanie

52 modeli

P
Printablesjj000000

Kabrio fingertip mouse mod for MAD R

This mod is now available for the VXE R1 as the MAD R is discontinued: https://www.printables.com/model/1387034-kabrio-fingertip-mouse-mod-for-vxe-r1 I've tried a couple of 3D printed fingertip mice but none of them were comfortable for…

Pobrania
1232
Polubienia
88
Ocena
5
P
Printablespatshead

Li'l Magnum! Fingertip Mouse Shell for VXE R1 / R1 SE / R1 SE+ (21 grams)

The mouse needed a name, so it is now called the Lil Magnum! Because it is small! Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! NOTE: I don't have an R1 to test. The R1 has the same screw pattern and…

Pobrania
1056
Polubienia
53
Ocena
5
P
Printablesjj000000

Kabrio fingertip mouse mod for VXE R1 (all versions)

This is a fingertip mod for the VXE R1 and its versions. The weight comes in at 26 g when printed in PLA using my settings. Please let me know if you have issues with the mod, so I can fix the design. My hand size is 18x10cm and I use an…

Pobrania
982
Polubienia
45
Ocena
5
P
PrintablesDavisSgt

Fingertip Logitech G102/103/203 mod - Zeromouse inspired

Fingertip mod for Logitech G103/203, inspired by OptimumTech's Zeromouse. Changed some things to allow usage of side buttons, scroll wheel and clamp for strain relief. Total weight is around 40g with PLA. 35g for side-buttonless version…

Pobrania
583
Polubienia
34
Ocena
5
P
Printableseutanzi

Fingertip Clawed Hand for Dummy 13

Attribution : this is a REMIX of soozafone's Dummy 13 "Claw" hand pose found here: https://www.printables.com/model/999963-dummy-13-extra-hand-poses Added some pointy (maybe too pointy) claws. Intended for a D&D Leonin but good for any…

Pobrania
514
Polubienia
121
Ocena
5
P
Printables8042

MM710 Fingertip Shell (30g)

The cooler master MM710 has a good sensor, small circuit board and you're able to get it in clearance most of the time (got mine for 25 euros). This makes it the perfect candidate for making a way cheaper version of the Zaunkoenig m2k…

Pobrania
445
Polubienia
42
Ocena
4,8
P
Printablespatshead

Li'l Magnum! Fingertip Mouse Shell for VXE R1 Pro (20 grams)

The mouse needed a name, so it is now called the Lil Magnum! Because it is small! Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse…

Pobrania
385
Polubienia
21
Ocena
0
P
PrintablesLynn

LAMZU Atlantis Fingertip Mouse

I've included my models for the main and secondary side buttons PCB in case anyone finds it helpful to create their own mod. That said, only the main PCB is tested for accuracy as that is the one I used in this model. For assembly, slide…

Pobrania
345
Polubienia
15
Ocena
0
P
PrintablesNotMe

Custom Fingertip Mouse V4

THIS IS NOT FINISHED Measurements may not yet be perfect, it is a work in progress. I ordered the print in 9600 resin from jlcpcb, and the part has to flex a LOT currently to get the pcb into position. I doubt it would work with sls or…

Pobrania
282
Polubienia
19
Ocena
0
P
Printablespatshead

Li'l Magnum! Fingertip Mouse Shell for VXE Mad R (16 grams)

This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. The thumb and finger rests are in a reasonable spot for me, and the buttons are lined up well. The shell requires…

Pobrania
265
Polubienia
16
Ocena
0
P
Printablesmorfaber78

Fidget Toys - Fingertip Gyroscope

Gioco progettato per il concorso di design Fidget Toys Stampa sul posto Piedistalli con doppia funzione, per appoggiarlo sulla scrivania e per tenerlo fermo mentre si gioca Cornice esterna con piedistalli, tre cerchi e una sfera centrale.…

Pobrania
250
Polubienia
50
Ocena
5
P
PrintablesAlex Li

20g Keychron M4 Fingertip Mouse Shell

Fingertip Mouse Mod – Optimized for FDM Printing Since FDM printers are most common, this print takes layer orientation into consideration and uses a slot-channel system for the main clicks to prevent any layer weaknesses which inherently…

Pobrania
236
Polubienia
26
Ocena
0
P
Printablesfa2315v

Fingertip mouse

This is my attempt to re-create optimum tech original mouse design: https://www.youtube.com/watch?v=xvz8KjCpdLE The shell is designed for razer v2 pro PCB.

Pobrania
234
Polubienia
13
Ocena
0
P
PrintablesBroederbenny

Cybercore Gauntlet – Futuristic Power at Your Fingertips

🤖 Cybercore Gauntlet – Futuristic Power at Your Fingertips ⚡ Step into the future with the Cybercore Gauntlet , a sleek, sci-fi inspired mechanical hand that looks like it came straight out of a high-tech exosuit or cybernetic lab. With…

Pobrania
197
Polubienia
38
Ocena
0
P
Printablesbnenana

31 gram Logitech G502 X/Hero fingertip mod

Inspired by the Zeromouse from optimum, it weighs around 30-33 grams fully assembled and comes together in mere minutes, just 25% of the mass of the original G502 Hero. It takes 9 screws from the original body and has 4 clickable…

Pobrania
178
Polubienia
21
Ocena
5
P
PrintablesAllemool

Fingertip Nut Holder

Finger Nut Holder For Nut M3 and M4 For Nut M5 and M6 For Nut M2,5 and M2 For Nut M1,6 To hold the mother in hard-to-reach places Put the nut in holder and then stick it on the finger All in one M1,6 - M6

Pobrania
178
Polubienia
75
Ocena
4,8
P
PrintablesBRE3DLOVE

Fingertips with Fingernails (for Posable Articulated Hand Model by Michael Wycoff)

===UPDATE February 7, 2024 Color separated Print Profile available: HERE ===ORIGINAL POST I'm a big fan of the original design & decided to add fingernails in a second color. Get the rest of the hand from the original designer…

Pobrania
168
Polubienia
42
Ocena
0
P
Printablesmenelos

OOLER/Chilipad Drain Key and Fingertip Saver

This is a replacement OOLER/Chilipad drain key plus a helper tool that I've dubbed the “fingertip saver”. The fingertip saver provides additional surface area for pressing in the drain key, allowing use of 2-3 fingers on each side of the…

Pobrania
154
Polubienia
5
Ocena
5
P
Printablespatshead

Li'l Magnum! Fingertip Mouse Shell for MCHOSE L7 Ultra (18 grams)

This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. The thumb and finger rests are in a reasonable spot for me, and the buttons are lined up well. The shell requires…

Pobrania
148
Polubienia
5
Ocena
0
P
Printablescrbn

Fingertip Lightweight Razer orochi v2 pcb 23-27g wireless mouse UPDATED VERSION

This is an ultralight mouse - 23g - based around the Razer Orochi v2 PCB with inspiration from the design by Optimum tech as well as the Zaunkoenig v2: https://zaunkoenig.co/ https://www.youtube.com/watch?v=xvz8KjCpdLE I used the…

Pobrania
133
Polubienia
25
Ocena
0
P
PrintablesDmitry Sorkin

Fingertip Protector with Velcro Strap – Work Guard for Injured Finger

Protective fingertip cover for people with an injured or damaged fingertip. Slides over the wounded finger and locks in place with a Velcro strap, so it stays put while you work. Absorbs accidental knocks and impacts, letting you keep…

Pobrania
126
Polubienia
69
Ocena
0
P
PrintablesMats

Razer DeathAdder V3 – Lightweight Fingertip mod

3D model description Cable Lock that secures cable, wireless uses tape for battery placement. Scroll Wheel support. maximum fingertip grip which allow small finger adjustments which really help you aim accurately. Tuned buttons that have…

Pobrania
113
Polubienia
6
Ocena
4
P
PrintablesVisio 3D Team

Math under your Fingertips 3D models

Mathametic models for VI studens for Math under your fingertips. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 100 Infill: 25 Filament: Generic PLA Notes: Suggested to print each shape with a…

Pobrania
89
Polubienia
21
Ocena
0
P
Printablesengineererrant

Fingertip X-Acto Blade Holder

This is an X-Acto blade holder modeled after the Fiskars fingertip craft knife holder. It allows you to push directly down on the rear of the blade, & gives you a great deal of control over where it goes. V2 UPDATE - Man the old one…

Pobrania
87
Polubienia
36
Ocena
0
P
PrintablesBorl

Skeletonized Fingertip Orochi V2

I saw Optimum Tech’s video on making his own lightweight wireless fingertip mouse (linked below) and decided to do the same. Before I made my own, I tried @crbn_559839 's fingertip Orochi (linked below), which showed me this was something…

Pobrania
74
Polubienia
20
Ocena
0
P
PrintablesSmolboi

Vancer Gretxa fingertip mouse frame 26g

This is a challenging print and will require supports to be tuned heavily for them to be removable while leaving clean bottom surfaces. I'd highly recommend that whatever material you use, get a gf/cf variant as supports will be much…

Pobrania
68
Polubienia
9
Ocena
0
P
PrintablesOxa

Pen at your fingertip

Printed without support

Pobrania
62
Polubienia
21
Ocena
0
P
PrintablesSatims

Zaunkoenig M3K Fingertip mod kit

WIP for my M3K modkit, weight comes in under 13g once the cable is plugged in. Will be updating this soon, as it's a mish mash of bit designed for other modkits.

Pobrania
62
Polubienia
8
Ocena
5
P
PrintablesAguara

redragon g49/k1ng pro m916 fingertip mod

Thank you ZoroSeerus for providing all the components measurements, you made my life easier how to disassembly assembly is the same, no need for new screws please let me know of any ideas for improvement

Pobrania
50
Polubienia
5
Ocena
0
P
Printablesa69291954

razer deathadder v3 fingertip mod 26.3g

i was not happy with the shape of my DAV3 and a wanted something really light. 26.3g in PETG low profile fingertip grip no sidebuttons all screw reused from the original Vitamins: 4x 6-7mm dot skates Feel free to request changes or share…

Pobrania
45
Polubienia
2
Ocena
0
P
PrintablesYukari._.

Lightweight Fingertip Mouse for GPW with Side Buttons

Print as is using PLA, requires modification on the side buttons, as shown in the images: Personal suggestion: utilize the unused side buttons if you have a first-gen GPW, since you don't need those anyway. Because first-gen and…

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesMatteo Zerba

fingertip mod for ATK GEAR X1 Ultra max 2.0

Remix of the fingertip mod for MAD R of jj000000 to work with the ATK GEAR X1 Ultra max 2.0

Pobrania
43
Polubienia
1
Ocena
0
P
PrintablesJon

Magic Fingertips

The model of Thing had a good spread of the fingers to use for this project. Added organic supports to act as the magic. Printed on an MMU using the soluble print setting.

Pobrania
36
Polubienia
14
Ocena
0
P
Printablespatshead

Li'l Magnum! Fingertip Mouse Shell for Corsair Katar Pro Wireless

Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! NOTE: Don't try to buy an ancient mouse like the Corsair Katar Pro Wireless ! I needed to support a different mouse to help me refactor the OpenSCAD source…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesBrange

G102 fingertip mod - no wheel

I made this model even more light and comfortable by removing scroll wheel and adding wider buttons. Total weight ~24g

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesMTKapp277

iMicro Fingertip microscope Focusing Stand

Need Brace x3 Side x2 Focuser x1 Prints under 10 minutes. Easy to press fit together. Fits in original package. Works very well. I am using it for the iMicro Q2. Category: Engineering

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesKiffir

Keychron M4 Fingertip Mouse Shell MOD

Main click buttons require glue-up (I used CA glue for PLA prints), the connection may not be perfect and need some sanding with fine file. Recommend printing in orientation shown in the screenshot, with hand-drawn supports under the…

Pobrania
29
Polubienia
3
Ocena
0
P
Printablesrealok

Razer viper V4 fingertip mod

Fingertip modkit for Razer Viper V4, goal while making this was as narrow grip as it gets. There are 8 files, 4 of them being holes versions. Then 4 versions of varying "wing" widhts. Assembly video: You need to also print 4 spacers,…

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesShibletKing

Rival 3 Wireless Fingertip Grip Mod

Print triggers on their side for best curves. To assemble place board on first and align the small pegs, may require a little wiggling. Screw in the first two middle screws first. Add triggers using screws from underneath the skates from…

Pobrania
26
Polubienia
2
Ocena
0
P
Printablespatshead

Li'l Magnum! Fingertip Mouse Shell for UHURU WM-09 (26 grams)

Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. I wanted to design a Li'l…

Pobrania
21
Polubienia
6
Ocena
0
P
Printablesrealok

Dareu A950 wing fingertip mod

can get whole build under 11g with 2g battery and removed encoder, scroll and scroll click I printed the clicks upright with generated supports, very fragile so be careful when taking the support off

Pobrania
16
Polubienia
1
Ocena
5
P
PrintablesTsubakiLine

Shrew W2 (Sora v2 Fingertip mouse)

This mouse is 15 grams using a 50 mAh battery with a magnetic USB C adapter, and printed in ABS and without the side buttons. Using the stock battery, it is about 19 grams. If using the stock battery, it can be mounted at an angle leaning…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesunlistedhub

Fingertip ajazz aj159p

My first project, may consume bugs

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesArthur Both

Balancing Dragonfly - Balances on Its Nose on a Fingertip, with Stand, No Supports (OpenSCAD)

A dragonfly that balances on the tip of its nose on a fingertip, a pencil, the edge of a glass or the point of the stand, and bobs back level when you nudge it. Its long wings sweep forward so the balance point sits right under the nose,…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesFLEX
Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesDean_Machine

Fingertip Sprayer Stick Mount

Pairs great with many other bathroom wall mount accessories. Use it to conveniently store and spray cleaner / mist of your choice. Equate Fingertip Sprayer Link . Below are some link examples for items shown in the display picture:…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesFu Ming

Kabrio fingertip mouse mod for VXE R1 series (S SE SE+ R1 Pro MAX) ALL IN ONE

The one to fit them all! PLS follow jj000000's guides! And support his works:) For R1 R1se R1se+ R1S(Nearlink) users, just print jj000000's original model and remember to like his great design. This remix is mainly a temp-solution for R1…

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesTAOG

Touch Fingertip Cover

Make touchfields visible and/or cover it.

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesKostek

Fingertip protector

Simple fingertip protectors, short to allow finger flexion

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesBorl

Skeletonized Fingertip Orochi V2.0

This is a lightweight fingertip shell for the Razer Orochi V2, and an updated version of a previous upload of the same project. As far as weight savings go for the shell itself, I don’t think I there's more than a decimal of a gram left…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesDanno

Li'l Blaster Fingertip Mouse Shell for Mchose L7 Pro (24g)

I went down the rabbit hole of lightweight mice and settled on the Mchose L7 Pro as my donor mouse, partially because I found the great starting material from patshead (including the scad files in his repo . I ended up going through many…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

31 gram Logitech G502 X/Hero fingertip mod

Inspired by the Zeromouse from optimum, it weighs around 30-33 grams fully assembled and comes together in mere minutes, just 25% of the mass of the original G502 Hero. It takes 9 screws from the original body and has 4 clickable…