P
PrintablesLukeFF
Ubiquity UniFi Cloud Gateway Max M.2 SSD Tray
The Cloud Gateway Max gets hot! Do not print in PLA!
- Pobrania
- 1579
- Polubienia
- 110
- Ocena
- 4,6
Wyniki wyszukiwania: gateway
243 modeli
P
PrintablesBIGRED
M.2 SSD Tray for UniFi Cloud Gateway Fiber.
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
- Pobrania
- 1360
- Polubienia
- 96
- Ocena
- 4,78
P
PrintablesBlunk
Unifi Cloud Gateway Ultra - SKÅDIS
Perfect fit for SKÅDIS mount for Ubiquiti Unifi Cloud Gateway Ultra. Does not block any I/O. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No support needed Printed with PLA with default setting
- Pobrania
- 1166
- Polubienia
- 80
- Ocena
- 4,88
P
Printables3D-XSpeed
Ubiquity UniFi Cloud Gateway Max M.2 SSD Tray
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
- Pobrania
- 1122
- Polubienia
- 38
- Ocena
- 5
P
Printablesemilpemil
Unifi Gateway Lite (UXG Lite) wall mount
Simple wall mount for the Unifi Gateway Lite (UXG Lite). You can face the ports either up or down, but not sideways. “-wide” has a wide hole pattern that has the same width as the old USG Gateway wall mount, making this wall mount a drop…
- Pobrania
- 996
- Polubienia
- 68
- Ocena
- 5
P
PrintablesAccessDenied
Unifi Cloud Gateway Ultra 10" rackmount
A 10" 1U rackmount for the UCG-Ultra with three keystone slots.
- Pobrania
- 815
- Polubienia
- 81
- Ocena
- 5
P
Printablesmikenelsonio
Unifi Cloud Gateway UCG Fiber Wall Mount
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
- Pobrania
- 785
- Polubienia
- 37
- Ocena
- 4
P
PrintablesSarge955
Unifi Cloud Gateway Ultra rackmount with 3x keystone slots
it is largely based on Foden's design , which it also fits together with. I have also made a model for the Unifi Switch Ultra (USW-Ultra)
- Pobrania
- 692
- Polubienia
- 44
- Ocena
- 5
P
PrintablesMiniWorld3D
Gateway Arch - St. Louis, Missouri USA
🇺🇸 Welcome to St. Louis! This model was created by Dany Sánchez . The Gateway Arch is a 630-foot (192 m) monument in St. Louis, Missouri , United States. Clad in stainless steel and built in the form of a weighted catenary arch, it is the…
- Pobrania
- 655
- Polubienia
- 79
- Ocena
- 4,33
P
PrintablesCode2
Gateway House
The Gateway House is perfect for your fantasy RPG. It can be printed with no supports.
- Pobrania
- 575
- Polubienia
- 112
- Ocena
- 0
P
Printablesjprince
Ubiquiti Cloud Gateway Fiber wall mount (UCG-Fiber)
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
- Pobrania
- 513
- Polubienia
- 40
- Ocena
- 5
P
Printablesrobinkwallace
Xfinity Gateway XB8 Wall Mount
Remix of my previous submitted Xfinity XB7 Gateway Router for the new XB8. A left and right side model is included.
- Pobrania
- 511
- Polubienia
- 27
- Ocena
- 0
P
PrintablesMarco Sikkens
Ubiquiti Cloud Gateway Max M.2 Caddy
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
- Pobrania
- 479
- Polubienia
- 27
- Ocena
- 0
P
PrintablesEvilProphet
ESRack - Module - Ubiquiti UniFi Cloud Gateway Ultra/Max
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
- Pobrania
- 457
- Polubienia
- 58
- Ocena
- 5
P
Printablesjprince
Ubiquiti Cloud Gateway Max/Ultra wall mount
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
- Pobrania
- 446
- Polubienia
- 39
- Ocena
- 4,67
P
PrintablesNick Dollimount
Unifi Cloud Gateway Fiber Wall Mount
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
- Pobrania
- 443
- Polubienia
- 33
- Ocena
- 4,75
P
PrintablesSomeZ3D
Unifi Cloud Gateway Max Vertical Stand & POE-Lite8 Stand
My Unifi Cloud Gateway Max sits on my desk. I noticed the aluminum bottom for heat dissipation gets rather hot. To help the heat dissipate and save space on my desk, created this small little vertical stand. One side of the stand I…
- Pobrania
- 381
- Polubienia
- 31
- Ocena
- 5
P
PrintablesMihir
Unifi Cloud Gateway UCG Max and Ultra 10inch Rack
Remixed towilab's design to allow for access of the UCG max's SSD port. Made the L-portion of the ‘clip’ on the right side a bit more aggressive while removing the left side one entirely, allowing super secure retention despite only…
- Pobrania
- 375
- Polubienia
- 35
- Ocena
- 5
P
PrintablesUko
Unifi Cloud Gateway UCG Fiber Wall Mount
My version ended up a bit tight. Maybe it's because of ASA shrinking. Maybe because of the slight warp. But maybe it's just a bit tight. The screw holes are for M4 screws. I decided to mount the device with it's “top” surface towards the…
- Pobrania
- 375
- Polubienia
- 18
- Ocena
- 0
P
Printableswhitespring
UniFi Cloud Gateway Ultra 10inch rack shelf
This is a matching shelf for Unifi Cloud Gateway Ultra. Fits with the lenovo tiny shelf, my TrendNet mod and my FritzBox mod. Printed with 10% infill and supports (slicer complains without, but I don't think there really are supports)…
- Pobrania
- 353
- Polubienia
- 26
- Ocena
- 0
P
PrintablesDavidM
Ubiquiti Unifi Cloud Gateway UCG-Max and UCG-Ultra
Created from scratch to allow me to make my own rack mount. I wanted to leave gaps for the vent holes and potentially the storage bay too. I've taken all the measurements myself on a UCG-Max and while I've made every effort to get them…
- Pobrania
- 341
- Polubienia
- 25
- Ocena
- 5
P
Printablestowilab
10 Inch Rack Mount for unify cloud gateway
A 10 inch rackmount for unify clout gateway ultra particularly stable Flat base on the front of the housing Integrated space for housing feet Precise fitting of the housing Clips to prevent it from being pushed out Printing possible…
- Pobrania
- 329
- Polubienia
- 34
- Ocena
- 0
P
PrintablesInterplanetary Goat
Unifi Cloud Gateway UCG Fiber Wall Mount - Bottom Ports
Larger spacing in the bottom so the device can be mounted screen top / ports bottom. Printed in PETG, holds the device really well.
- Pobrania
- 302
- Polubienia
- 27
- Ocena
- 5
P
PrintablesThe Kit Card Guy
AVM FRITZ!Repeater (all models!) & FRITZ!Smart Gateway stand / mount / holder
Summary This is the one-size-fits-all repeater stand for all the wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a Euro plug extension cable. Compatibility list - all wall plugged AVM Fritz!Repeater (article…
- Pobrania
- 289
- Polubienia
- 30
- Ocena
- 5
P
PrintablesNautilus Forge
Unifi Cloud Gateway Max or Ultra - Wall Mount - M3
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
- Pobrania
- 284
- Polubienia
- 18
- Ocena
- 5
P
PrintablesStanley
Meshtastic or MeshCore Router/Gateway/Repeater - Heltec Wireless Stick Lite v3
Meshtastic or MeshCore Router/Gateway/Repeater based on Heltec Wireless Stick Lite v3 with additional components: LM2596 DC/DC Step-down Power Supply INA219 DC Current Power Supply Sensor BME280 Temperature, Humidity, Barometric Pressure…
- Pobrania
- 270
- Polubienia
- 116
- Ocena
- 5
P
PrintablesLeif Lumby Henriksen
Mount for Ubiquiti Cloud Gateway Ultra (Unifi UCG Ultra)
Engelsk: Mount for Ubiquiti Cloud Gateway Ultra (Unifi UCG Ultra) This mount is specifically designed to securely hold your Ubiquiti Cloud Gateway Ultra (also known as the Unifi UCG Ultra) in a practical and efficient way. With this…
- Pobrania
- 265
- Polubienia
- 16
- Ocena
- 5
P
PrintablesThe Kit Card Guy
AVM Fritz!Repeater 1750E & 2400 & Smart Gateway stand / mount / holder
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
- Pobrania
- 239
- Polubienia
- 16
- Ocena
- 5
P
PrintablesBrian Berkley
10in-Rack-Unifi-Gateway-Max
This is a mount to put a Unifi Gateway Max router into a mini 10in network rack. Print with the face of the mount down on the build sheet, rotated 45 degrees. Print with supports (I chose organic supports). No hardware required, unit…
- Pobrania
- 222
- Polubienia
- 35
- Ocena
- 5
P
Printablesjprince
Ubiquiti Cloud Gateway Ultra wall mount
Wall mount bracket for Ubiquity Cloud Gateway Ultra. Gateway snaps into base and is held very tight. Printed on MK4 Layer Height: .20 4 Perimeters 15% or 20% infill (grid). I tested successfully with 15% infill. No supports needed Suggest…
- Pobrania
- 216
- Polubienia
- 24
- Ocena
- 5
P
Printablesrobinkwallace
Xfinity Gateway XB7 Wall Mount
Redesigned XB7 wall mount with additional support.
- Pobrania
- 214
- Polubienia
- 19
- Ocena
- 0
P
Printablescornspirit
Cloud Gateway Max / UCG Max Vertical Wall Mount
No curveballs on print settings for this one. Any layer height should work, but I print in .2mm. This model does require supports for the flanges that hold the UCG down. I use organic supports that I painted on within Prusaslicer. .F3d…
- Pobrania
- 212
- Polubienia
- 7
- Ocena
- 5
P
PrintablesKrisas Man
Ubiquiti Cloud Gateway Max wall mount
Wall mount bracket for the Cloud Gateway Max. The Max, unlike the Ultra, has cooling vents along the base so I simply added clearance for airflow.
- Pobrania
- 206
- Polubienia
- 10
- Ocena
- 0
P
Printablesfatgeek
Ubiquiti Cloud Gateway Max PSU Wall Mount
I needed a wall mount for my Cloud Gateway Max's PSU so I made this. It's designed for the #6 screws I had on hand, but you could probably get away with another kind. The screw hole is 6mm. I printed mine in PETG for the extra flexibility.
- Pobrania
- 201
- Polubienia
- 22
- Ocena
- 5
P
PrintablesCPS_Systems
Sonoff Zigbee 3.0 USB Dongle Mount Command Strip, Hole(s) and Skadis Remix Gateway
Added recess for Command Strip (small poster) mount. Added hole for mounting. Flattened section to create a “bottom” for alternate orientation while printing. Added friction “bumps” to the side to add grip for dongle. Note: Using this…
- Pobrania
- 191
- Polubienia
- 31
- Ocena
- 5
P
PrintablesShmal
Wall Mount Shelf for Shaw Fiber+ Gateway 2.0 Modem XB7 / Arris TG4482
Partially enclosed shelf for a Shaw Fibre+ Gateway modem 2.0 (XB7). Also works for Comcast XFinity TG4482 / Arris. Printed with PETG, 20% infill, no supports needed. Suggest adding a cylinder modifier around the screw holes to strengthen…
- Pobrania
- 169
- Polubienia
- 15
- Ocena
- 0
P
PrintablesPapaPlintus
Cloud Gateway Ultra & UniFi Switch Lite 8 POE Stand
Stack to allow you to manage your Cloud Gateway Ultra and Lite 8 POE switch
- Pobrania
- 165
- Polubienia
- 13
- Ocena
- 5
P
PrintablesBelBuilds
Roman Triumphal Arch 3D Printable Model – Classical Stone Monument Gateway
Bring timeless grandeur to your tabletop or display with this Grand Roman Triumphal Arch . Inspired by classical Roman architecture, this monumental gateway features detailed Corinthian-style columns, carved relief panels, and an ornate…
- Pobrania
- 155
- Polubienia
- 16
- Ocena
- 5
P
Printablesmickarp
Stand for Cloud Gateway Fiber UCG-Fiber
UCG-Fiber stand that raises the device a bit for better airflow.
- Pobrania
- 147
- Polubienia
- 8
- Ocena
- 5
P
PrintablesBlakadder
GL.iNet GL-S10 Bluetooth gateway wall mount
A wall mount for GL-S10 bluetooth gateway serving as an ethernet esphome bluetooth proxy for Home Assistant, remixed from the original AR300M wall holder with an additional BT icon inlay for fun Guide on configuring it as a bluetooth…
- Pobrania
- 144
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBjorn V
Medieval door - Stone gateway - Diorama
A Medieval looking door i designed to see if i like painting :). There are some more “door” examples available to download, i used these to inspire me. But.. i found the “to realistic” stones and planks a hastle to print with to many…
- Pobrania
- 140
- Polubienia
- 30
- Ocena
- 0
P
PrintablesJustAnotherDutchy
Wall mount for Ubiquiti Cloud Gateway Ultra
Since Ubiquiti does not offer any wall-mounting options for their new Cloud Gateway Ultra. I decided to make this myself. Just print it flat on it's back, it does need some supports but nothing too crazy. Your CGW Ultra should just slide…
- Pobrania
- 139
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJeffCurless
10" Rack Mount for Unifi Security Gateway
3D Printed 10" Network Rack Mount for Ubiquiti UniFi Security Gateway As part of my classroom network setup project, I’m building 10" 3D-printed racks for my students. They'll be configuring and testing real-world networks, gaining…
- Pobrania
- 137
- Polubienia
- 13
- Ocena
- 0
P
PrintablesReedy
Tado V3 gateway bracket (Screw or DIN rail)
Imported from https://www.thingiverse.com/thing:4080914 by superkris .
- Pobrania
- 134
- Polubienia
- 14
- Ocena
- 4,86
P
PrintablesNiH
10" rack mount Ubiquiti Cloud Gateway Ultra/Max
10" rack tray for the Ubiquiti Cloud Gateway Ultra/Max gateways. Model is split in 3 parts (tray, left- & right mount) to be printable on smaller print-beds. The left mount also contains a slot for a Keystone jack. The mountings are…
- Pobrania
- 133
- Polubienia
- 14
- Ocena
- 5
P
Printablesduck9r
Unifi Cloud Gateway Ultra 10" rackmount - 2 Keystone version
Someone in the comments of the original asked for a version with only 2 keystones, so here it is!
- Pobrania
- 129
- Polubienia
- 14
- Ocena
- 5
P
Printablessicarius80
Unifi Gateway Max and Ultra Wall mount
Remix of @BrianBerkley 10" Rack mount. It works with UXG-Max (Gateway Max) and UCG-Ulta (Cloud Gateway Ultra). Won't fits UX (UniFi Express) or UXG-Lite (Gateway Lite). Do you like my models? Consider buying me a coffee .
- Pobrania
- 129
- Polubienia
- 12
- Ocena
- 0
P
PrintablesEyepokerouter
T-Mobile Gateway Wall Mount
Wall mount for the Arcadyan T-Mobile internet gateway. Preserves airflow, and access to ports and screen. Designed with an arrayed set of mounting holes for flexibility aligning with mounting screw locations. Print with the tall side with…
- Pobrania
- 128
- Polubienia
- 11
- Ocena
- 5
P
Printableschris everhart
UniFi Gateway Lite 19" Rack Mount with Two Keystone-Jacks
Compatible with https://www.printables.com/@Freddy other parts
- Pobrania
- 126
- Polubienia
- 11
- Ocena
- 5
P
PrintablesAL ExtremeError
Wall Mount for T-Mobile Gateway (Model TMO-G4AR)
The mount secures the gateway safely to a wall, keeping it off desks or shelves to free up space. Custom fit – designed around the TMO-G4AR for a snug and stable hold. Wall-mountable – allows you to position your gateway up and out of the…
- Pobrania
- 124
- Polubienia
- 8
- Ocena
- 5
P
PrintablesMarcel Klapwijk
OpenTherm GateWay case
A simple wall mounted case for the nodo-shop ethernet version of Schelte Bron's OpenTherm GateWay. Just print the ethernet blind plate (will follow soon) if not using the ethernet option on the OTGW. Materials and methods Print settings:…
- Pobrania
- 120
- Polubienia
- 7
- Ocena
- 0
P
Printableselvenone
Unifi Express Gateway 10in Rack Mount with Keystone Jacks
This is designed to mount a Unifi Express Gateway to a 10in server rack. It doesn't need supports, though it will require bridging, and will be a fairly snug fit. After printing remove bridging on the back to make room for ethernet and…
- Pobrania
- 118
- Polubienia
- 20
- Ocena
- 4
P
PrintablesWBW602
Unifi Cloud Gateway Ultra Rack Mount
Rack Mount for Unifi Cloud Gateway Ultra, with 3x RJ45 Jacks
- Pobrania
- 115
- Polubienia
- 14
- Ocena
- 0
P
PrintablesFigurecraft
Ornate Gateway
Putting it at 4000% size should make it a lot more workable. This model will be slightly different than the picture due to rendering, but maintains the detail and basic shape.
- Pobrania
- 108
- Polubienia
- 23
- Ocena
- 0
P
PrintablesLudmod
Lorcana Gateway - Box Inlay
Lorcana Gateway - Box Inlay An inlay to fit all the game components of the game into the original box, especially sleeved cards. There is enough space in the trays to add cards from booster packs later on. The card trays for the player…
- Pobrania
- 100
- Polubienia
- 22
- Ocena
- 5
P
PrintablesD3Cove
Unifi Cloud Gateway (UCG) Ultra / Max Vertical Stand B
A form-fitting vertical stand for the Unifi Cloud Gateway (UCG) Ultra router. It is designed to allow cool air flow to the router's underbelly, which reduces operating temperature, and gain perk of a smaller desk profile. Stand dimensions…
- Pobrania
- 100
- Polubienia
- 5
- Ocena
- 5
P
Printablesjthomeo
Tuya Zigbee Wireless Multi Mode Hub Gateway
I bought this little Zigbee hub gateway to add smart devices to my home, and it was laying around without a proper place. I've decided to create a simple support to allow me to stick it to a wall. So, I've printed mine in white PETG, with…
- Pobrania
- 97
- Polubienia
- 13
- Ocena
- 0
P
PrintablesJulian
Ubiquiti UniFi SSD Tray M.2 | short M3 Heat Inserts | for UNAS Pro and Cloud Gateway
I have created a design for the SSD tray from Ubiquiti that works with short (max. 4 mm high) M3 heat inserts. The SSD tray is compatible with the UNAS Pro series. The design is heavily based on the one by LukeFF .
- Pobrania
- 83
- Polubienia
- 6
- Ocena
- 5
P
Printablesratchet34321
SensorPush Gateway Hub Wall Bracklet
Wall bracklet, with two mounting holes to to secure the SensorPush Gateway Hub to a wall, with access to all IO. No support required on clip overhangs, if print at 0.2mm layer height. Printed on Bambu Lab X1C - Bambu Lab Green Basic PLA
- Pobrania
- 83
- Polubienia
- 6
- Ocena
- 5
P
PrintablesFeveredMind
Remix of T Mobile Gateway Wall Mount
Fantastic original design. I just wanted to open up the bottom for maximum passive cooling and cleaned up a few other things. Category: Model Furniture
- Pobrania
- 83
- Polubienia
- 5
- Ocena
- 4
P
PrintablesPeter Farell
Dark Ages Gateway Indulgence Coin : Gothic Coin
Dark Ages Gateway Indulgence Coin. *non-historical.
- Pobrania
- 82
- Polubienia
- 28
- Ocena
- 0
P
PrintablesScotthon
Ubiquiti Unifi Security Gateway Mounting Bracket
Holes are 3.2mm for #8 screws. Power supply bracket leaves power LED visible when properly installed.
- Pobrania
- 80
- Polubienia
- 11
- Ocena
- 5
P
PrintablesMatthew Hitchens
St. Louis Gateway Arch scale model
I created this as a sort of moonshot project idea after getting my first 3D printer. My goal was to create a scale model of the Gateway Arch by using the same engineering drawings and plans as the original, using Autodesk Fusion as the…
- Pobrania
- 79
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCrashdown
Unifi floating mount 17cm for Cloud Gateway Max
A diy version of the Ubiquity floating mount 17cm for compact gateways. Required 60x10x3mm bar magnets x5 M3 or M4 countersunk screw x4 In the slicer add a pause at the 3.6mm layer height or layer 18 if using 0.2mm layers. The layer right…
- Pobrania
- 78
- Polubienia
- 8
- Ocena
- 5
P
Printableskite2kite
Zyxel Gateway 400 Rack mount Ears
Rack Mount Ears (19" Inch) for the Zyxel 400 Voip Gateway I created this Rack mount Ears for the Voip Gateway 400 delivered by Telekom Germany. Fitted perfectly to our Rack. Print instructions For Printing just import the STL to you…
- Pobrania
- 78
- Polubienia
- 4
- Ocena
- 0
P
Printablesprince of prints
Another Remix of T Mobile Gateway Wall Mount
The mount was not big enough for my T-Mobile gateway, so I embiggened it for the "FAST 5688W" model. Printed with 40% infill and fuzzy-walls in PETG. I suggest mounting one side into a stud and the other with a wall anchor. You could…
- Pobrania
- 76
- Polubienia
- 4
- Ocena
- 0
P
PrintablesStefanN
Case for ESP32-Modbus-Gateway (FreeCAD)
The Gateway To connect a Photovoltaic inverter to a SmartHome-environment the Github user @TobiasFaust developed the great project SolaxModbusGateway - big thanks to him! His Gateway is composed of a ESP32-board and a RS485…
- Pobrania
- 73
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEdtheduck
UniFi Gateway Fiber (UXG-Fiber) Vertical Stand
Vertical Stand for Ubiquiti Unifi Gateway Fiber. Print with 0.2 resoultion Minimum 15% infill Add doubleside tape at bottom to improve stability.
- Pobrania
- 73
- Polubienia
- 6
- Ocena
- 5
P
Printablesfhessel
LoRaWAN Gateway (RPi Zero W, WM1302)
This is a small case for a LoRaWAN Gateway using a Raspberry Pi Zero W and a WM1302 LoRa gateway module from Seeed Studio. The case exposes only the MicroUSB connector for power supply and an SMA connector for the LoRa antenna to minimize…
- Pobrania
- 68
- Polubienia
- 5
- Ocena
- 0
P
PrintablesArnoldstrife
Wall Mount for Verizon 5G Business Modem/Gateway (XC46BE)
I measured the mounting feet on the modem and made some feet that securely slid in and locked in place, then put it on a random L bracket I found. The antennas should be facing a certain way, so it's not just mounted to the wall at a 90…
- Pobrania
- 65
- Polubienia
- 4
- Ocena
- 0
P
Printablesclever
RAK WisMesh Ethernet Gateway Indoor Case
Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules. I just used the integrated basic antennas and stuck them to the inner wall of the case –…
- Pobrania
- 65
- Polubienia
- 6
- Ocena
- 5
P
PrintablesBos
UniFi Cloud Gateway Fiber Wall Mount 90°
I made a wall mount that fits my new UniFi Cloud Gateway Fiber in a 90° rotated orientation (the screen automatically rotates). It fits perfectly on all sides and doesn't block the ventilation or the NVMe SSD storage compartment. Due to…
- Pobrania
- 62
- Polubienia
- 9
- Ocena
- 0
P
Printablessrslider
T mobile Gateway stand
This is a cooling stand for the T mobile KVD21 5G gateway. It uses a usb 80mm fan.
- Pobrania
- 61
- Polubienia
- 8
- Ocena
- 0
P
Printablessammichpants
Ubiquiti Unifi Security Gateway (USG) 3P 40mm drop-in fan shroud
Remixed anocweb's original model in order to allow a little more room for the factory screws. If you'd prefer using a 30mm fan, there is a STL for that on the original model's page. I printed mine on an Ender 3 Pro, somewhat modded.…
- Pobrania
- 60
- Polubienia
- 4
- Ocena
- 5
P
PrintablesThe Suited Engineer
Hornbill G2 Gateway (TTLock) Wall Mount
I have a TTLock compatible smart door lock and I wanted a way to keep my Hornbill G2 TTLock Gateway off the ground and tidy. So I made this simple mount. It can be mounted using command strips, double sided tape, velcro, etc. Since this…
- Pobrania
- 60
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPhil
Skadis Tratfri Gateway mount adapter plate
This is a simple way to get your IKEA Tratfri Gateway fit on your Sakdis wall. Ment to use with the dovetail hooks from Tiggr. https://www.printables.com/de/model/271008-skadis-hook-with-dovetail
- Pobrania
- 58
- Polubienia
- 6
- Ocena
- 5
P
PrintablesOnk_the_Monk
Smart Gateways - Water Meter Gateway holder for Elster/Honeywell v200 watermeter
I made this model to have a perfect fixed position for my water meter gateway sensor on my Elster/Honeywell v200 water meter. There comes a holder with the gateway but it is one size fits all and I found it hard to have it in the right…
- Pobrania
- 57
- Polubienia
- 3
- Ocena
- 0
P
Printableserhapp
OpenDTU / OpenMQTTGateway case - Blank top
A blank top (no logo or text) for the OPenDTU case. Fits an ESP32 (30 pin) devboard and a CC1101 radio. Using the OpenMQTTGateway-software this results in a self contained RTL 433 Mhz to WiFi bridge.
- Pobrania
- 56
- Polubienia
- 6
- Ocena
- 0
P
Printableswilhel1812
Plejd Gateway mounting bracket
Simple and invisible mounting bracket for the Plejd GWY-01 Gateway
- Pobrania
- 55
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLeon Katerbarg
19 Inch Unifi Cloud Key Gen 2 plus and Security Gateway mount
19 inch mount for: Cloud Key Gen2 plus Security Gateway Features: Nice tight fit Fully printable on any 3D printer (modular design) Spacers to make up the difference that there not hanging On the foto there is missing the fill in piece,…
- Pobrania
- 55
- Polubienia
- 6
- Ocena
- 0
P
PrintablesmyWobblys
Tuya Gateway Hub wall mount
Basic wall mount for a Tuya Gateway hub. Friction fit so the hub just pushes in. Print in whatever material you like, photos are PLA+. 15% fill is plenty strong enough.
- Pobrania
- 54
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAlanMG
Ikea Trådfri Gateway Wallmount
Printed with 2 walls, 15% rectiliniar infill and tree supports. Gives a nice discreet mounting option for the Ikea gateway that is still easily accessible.
- Pobrania
- 53
- Polubienia
- 5
- Ocena
- 0
P
PrintablesD3Cove
Unifi Cloud Gateway (UCG) Ultra / Max Desk Stand
The belly of the Unifi Cloud Gateway (UCG) Ultra router, on normal days, feels warm to the touch, and rapidly hot when network stressed. It just sits flat on the table, without airflow, and stews. This basic desk stand, designed to let…
- Pobrania
- 51
- Polubienia
- 5
- Ocena
- 5
P
PrintablesScotthon
Wall mount bracket for Ubiquiti Cloud Gateway Max and Power Supply
These brackets were designed to mount the Ubiquiti Cloud Gateway Max and power supply in a trailer at any angle so it has to be mounted securely without relying on clips. The brackets have 4.5mm mounting holes for #8 pan head screws.…
- Pobrania
- 50
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDima
UCG Fiber (Unifi Cloud Gateway Fiber) 10 inch Rackfinity mount Prusa Mini compatible
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see…
- Pobrania
- 50
- Polubienia
- 16
- Ocena
- 5
P
PrintablesSuperjanneke
DIYLess Opentherm Gateway case
Simple case for the Opentherm gateway from DIYLess. Printed using PLA. Using M3 screws with hot melt brass inserts. With holes for mounting to a wall.
- Pobrania
- 50
- Polubienia
- 5
- Ocena
- 0
P
Printablesawestom
Rackmount kit for Unifi Security Gateway 3P
Rackmount kit, puts the USG to the right hand side, has a shelf for the power supply on the left. Remix of https://www.thingiverse.com/thing:3162728
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAntonín JUDYTKA
Holder for zigbee gateway Woox
Držák zigbee brány Woox R7070. Tisk: Vrstva: 0.2 Perimetry: 2 (tisk z perimetrů) Material: PLA, PetG, ABS, ASA… ----------------------------------------- Woox R7070 zigbee holder. Print: Layer: 0.2 Perimeters: 2 (print from perimeters)…
- Pobrania
- 48
- Polubienia
- 5
- Ocena
- 5
P
Printablessoosp
Olimex ESP32-GATEWAY housing
Housing for Olimex ESP32-GATEWAY with Ethernet, microSD and USB cut-outs. Several variants are available: - with or without cut-out for cables to the GPIO pins - with or without OSHW logo - with or without screw holes One box requires to…
- Pobrania
- 47
- Polubienia
- 0
- Ocena
- 5
P
PrintablesTarrant1701
Unifi Cloud Gateway Ultra / Max Skadis Mount
This is an IKEA Skadis mount for the Ubiquiti Unifi Cloud Gateway Ultra / Max. The original was created by @Blunk_1885178 but was made for a different orientation. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No…
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
PrintablesZzoyozZ
Raise3D Pro3 Bowden-Gateway
No brim, no support necessary.
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
Printablesscruss
Saarinen's Gateway Arch, lo-poly, 1:1200 scale
Eero Saarinen's Gateway Arch in St. Louis, MO at 1:1200 scale. Rendered in OpenSCAD according to the official equations as a low poly model with only 134 faces (excluding base). No attempt has been made to render the Gateway Arch National…
- Pobrania
- 45
- Polubienia
- 2
- Ocena
- 0
P
Printables3DBob
Shelf for Cox CGM4981 Panoramic Wifi Gateway
The screw pattern piece is disposable; it just makes marking where the screws go in the wall a little easier. I hope you like ❤❤ this model! Happy Printing!! 🎉🎉
- Pobrania
- 41
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRadek Smrž
Cetin Terminator + UniFi Cloud Key Gen2 a UniFi UXG lite gateway + UCK-G2
Rack panel upraven pro potřeby využití bondingu v CZ podmínkách na terminátor Cetin (šachta na zastrčení) - drží to tam pouze zasunutím a odporem vůči gumovým nožičkám. A dále šachtou pro zasunutí Unifi UXG lite. Je možné jse zastrčit LAN…
- Pobrania
- 41
- Polubienia
- 3
- Ocena
- 0
P
Printablesjornthree
Ubiquti Gateway Lite 10" Rack Mount (REMIX)
A 10" Rack mount for the Ubiquiti Gateway lite, along with keystone jack ports for rerouting of cables. A remix of the original model by Chris Everhart. This is a quick and dirty remix by a novice (My first remix, in fact!), so mind some…
- Pobrania
- 40
- Polubienia
- 5
- Ocena
- 0
P
Printablesmsp748
Altice Fiber Gateway GR140DG mounting brackets
Printed on Ender 3 Pro, used Inland PLA+. I printed 3 but only ended up using two of the mounting brackets. The holes for the screws are roughly 4.5mm because I am using thick screws I had laying around (#10x1"). Feel free to remix in…
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDerRemo
Wall mount for SONOFF Zigbee Gateway
A wall mount holder for the Sonoff Zigbee Gateway. No Supports needed. Works for me in PLA.
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 5
P
PrintablesDoes Plastic
Tuya ZigBee Multi-mode Gateway Hub Mount
Hub : https://s.click.aliexpress.com/e/_c4bWENNz Filament Type : ASA, PETG https://amzn.to/45V2hFw Layer Height: 0.1MM Walls : 2 Infill : 15% Supports : false Print in place : false If you want to thank me subscribe here and to my YouTube…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 5
P
PrintablesDocScott
Nokia T-Mobile Gateway Cooling Fan
I recently got a Nokia 5G21 internet gateway from T-Mobile. The device is passively cooled and runs a bit warmer than I'd like although it never had any indications of overheating. I found a silent 120mm fan in my junk box and printed a…
- Pobrania
- 37
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMcGr3g0r
433 to Wifi gateway chasis
433 MHz ASK receiver to ESP8266 based WIFI MQTT gateway Print instructions PLA, 40% infill
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0