Wyniki wyszukiwania: hd

Sortowanie

5340 modeli

P
PrintablesNautilus Forge

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP !

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
4274
Polubienia
1071
Ocena
5
P
Printablesevax design

Happy Birthday pinprick

It is a decoration designed to decorate a cake. It's very simple. It is 14 cm high, 20 cm wide and 0,4 cm thick. Please refer to the printing instructions before printing. The model can be proportionally scaled up or down, but you need to…

Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu

Pobrania
1315
Polubienia
163
Ocena
5
P
PrintablesAnubiz3D

2.5" HDD / SSD Caddy for HP ProLiant Server G5 G6 G7

This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…

Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu

Pobrania
1260
Polubienia
139
Ocena
4,8
P
PrintablesArtyL

Prusa MK3 RHD Fan Shroud Duct revC

This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…

Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu

Pobrania
1217
Polubienia
94
Ocena
5
P
PrintablesScott Gibb

2.5" HDD Case

3D printed 2.5" HDD Enclosure A simple 3D printed case for an old 2.5" HDD. The case is designed such that, for the most part, it is a push-fit, with four nuts at the bottom, mounting the drive to the plastic case. Equipment List 4 x…

Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu

Pobrania
936
Polubienia
60
Ocena
5
P
Printablescedarrapidsboy

HDD + SSD Tray

Put all your spare disk drives in one place. Use this to organize a spare parts pile or line up your cold spares for your NAS. Fits 8x 3.5" disk drives and 3x 2.5" disk drives. Print settings: WARNING: Large print across entire build…

Wydruk około 17,35 €–21,20 € nettoWstępna wycena jednego wariantu

Pobrania
740
Polubienia
105
Ocena
5
P
PrintablesDraakjeYoblama

Apple Mac Pro 3.5" to 2.5" HDD/SSD mount adapter

Adapter for the 4,1 and 5,1 Mac pro (2009-2010) to fit smaller HDD or SSD on the mount meant for bigger HDD. It will only work with SATA drives, because that's what the computer uses. The 4 small printed bolts are not strictly necessary…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
703
Polubienia
48
Ocena
5
P
PrintablesLoubie3D

Pōpoki: the Good Luck Tiki cat (for Chris's birthday)

Today (16th July)is my friend Chris's birthday and as he loves Hawaii and cats, I had a theme for for his birthday model in mind already. Chris is a good pal and deserves birthday wishes There are not many tiki cats and definitely not…

Wydruk około 9,92 €–12,12 € nettoWstępna wycena jednego wariantu

Pobrania
392
Polubienia
100
Ocena
4,75
P
PrintablesKONEz*347

Tap/Faucet Aerator Mischdüsenschlüssel, für Wasserhähne

wrench, for taps M24 aerator, tap strainer insert external thread, Tap / Faucet Aerator (Perlator) filter Tool

Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
380
Polubienia
55
Ocena
4,94
P
PrintablesLukasz

HDZero Goggle SpeedyBee Analog VRX cover.

This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…

Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
300
Polubienia
21
Ocena
5
P
Printablesvermontsfinest

Fire 10 HD Tablet Stand

Fit for a 10.1" 2019 Release, 9th gen Print Settings Printer: Ender 3 with Ender Extender kit Supports: Yes Resolution: 0.2mm Infill: 20% Filament material: PLA Charging wire used:…

Wydruk około 36,11 €–44,13 € nettoWstępna wycena jednego wariantu

Pobrania
274
Polubienia
23
Ocena
0
P
PrintablesTom

Sortiment for Qbrick Systainer One 2.0 - Drawer 3.0 Ultra HD

Sortiment for QBrick ONE 2.0 DRAWER 3 TOOLBOX EXPERT RED Ultra HD Box Size : S , M , L , .…

Wydruk około 19,01 €–23,24 € nettoWstępna wycena jednego wariantu

Pobrania
257
Polubienia
83
Ocena
0
P
PrintablesHogger

16th birthday medal

16th birthday medal you can make for your son or daugter. Best printed with the color change function, see pictures. I used 4 colors, Prusament Galaxy-Black, Gentlements-Grey, Copper and Gold.

Wydruk około 8,34 €–10,20 € nettoWstępna wycena jednego wariantu

Pobrania
243
Polubienia
34
Ocena
5
P
Printablessternli27

Makita DPJ180 Plate Joiner Flachdübelfräse Lamello Box

Printed in two halves, because of the large size. No support needed. Connected by 2.5x8mm cylindrical pins and/or glue. There is a small gap when the box is closed. To make sure no parts escape from the organizer when the box gets tilted,…

Wydruk około 16,41 €–20,05 € nettoWstępna wycena jednego wariantu

Pobrania
234
Polubienia
57
Ocena
4,5
P
Printablesbrva

Frame-reduction-holder for 2.5" HDD SSD to 3.5" slot. / Rámeček-redukce-držák pro 2.5" HDD SSD do 3.5" pozice

To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.

Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
216
Polubienia
23
Ocena
5
P
Printablescbearman

Console for Elecrow 5" HDMI Touchscreen and Raspberry PI

A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…

Wydruk około 3,09 €–3,77 € nettoWstępna wycena jednego wariantu

Pobrania
185
Polubienia
11
Ocena
0
P
Printablesjon

Antec isk110 nas mod 6hdd - ITX PC NAS CASE

Hello. DISCLAIMER: This is one of my first projects when I was trying to learn fusion 360/ CAD by my own. Contains errors, and can be better, but I think now It's sufficent to be released and other users can use it :) , I learned a lot…

Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
175
Polubienia
76
Ocena
0
P
PrintablesEdison82

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…

Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu

Pobrania
173
Polubienia
31
Ocena
4
P
PrintablesSorcier

HDD Case for BitFenix Prodigy m 2022

I designed this compartment in order to put 6 hard drives 3.5 in the bottom of the BitFenix prodigy M 2022 case in the place normally intended to contain only two. I had originally created a NAS server under the Unraid OS with 4 hard…

Wydruk około 9,74 €–11,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
142
Polubienia
23
Ocena
0
P

Birthday / Greeting Card - Hinged - No Pocket - for your own message with Power Point or felt tip pen

This card is similar to others I have published, except it is plain, without an embedded message, and without a pocket within. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be…

Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu

Pobrania
135
Polubienia
10
Ocena
0
P
PrintablesMarcus

SSD HDD Cage 8 x 2.5 to 3x5.25

Needed to 8 x 2.5" ssd to a lab server There is a small tolerance so you might need to push in the disk a litle bit. There is room for a 120mm fan enjoy

Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
134
Polubienia
22
Ocena
0
P
PrintablesMattWasHere

Walksnail Avatar HD Goggles X Module Bay

Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…

Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
132
Polubienia
16
Ocena
0
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu

Pobrania
124
Polubienia
10
Ocena
0

RGBtoHDMI adapter housing for Amiga 600

This is the Amiga 600 version of my RGBtoHDMI adapter Amiga 500 Version. For assembly instruction look at the Amiga 500 version. https://www.printables.com/model/63688-rgbtohdmi-adapter-housing-for-amiga-500

Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu

Pobrania
121
Polubienia
6
Ocena
0
P
PrintablesShmidtey

Leg extension for home depot HDX storage shelf/rack

This is a leg extension for the HDX storage shelving unit from home depot. It extends the height by approximately 100mm. I printed mine with my Prusa Mini+ in PETG at 0.2mm layer height, no supports needed. The fit should be a lightly…

Wydruk około 14,19 €–17,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
112
Polubienia
14
Ocena
3
P
PrintablesTomáš Čmiko

2.5" HDD/SSD Holder – 10 Drives (7&9.5mm Support)

A compact and practical storage holder designed for 2.5" HDD and SSD drives . The holder can store up to 10 drives and is compatible with both 7 mm and 9.5 mm thick disks , without any adapters or modifications. Each slot is shaped to…

Wydruk około 5,16 €–6,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
107
Polubienia
14
Ocena
0
P
PrintablesSantiago gomez

happy birthday topper

happy birthday topper

Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu

Pobrania
94
Polubienia
10
Ocena
0
P
PrintablesDRALUOP

BAFANG GUARD (BBSHD-BBS01-BBS02) Electric Bike Rain Snow Mud Protector

Protect your Bafang BBS01, BBS02, or BBSHD motor with this 3D-printed guard, easily installed on your bike frame with simple zip ties. Designed to shield your motor from rain, snow, and mud splashes from the front wheel, it’s especially…

Wydruk około 18,69 €–22,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
91
Polubienia
8
Ocena
5
P
PrintablesSTSUL.CZ

cake topper Happy Birthday

The object is printed with the front side facing the bed.

Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
85
Polubienia
6
Ocena
0
P
PrintablesAndre

USB-Flashdrive und SD-Card Shelf for Cooler Master QUBE 500

A simple shelf to keep your flashdrives and sd-cards in reach

Wydruk około 5,05 €–6,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
85
Polubienia
21
Ocena
0
P
Printableszxb466

HD Better Basic Board Cover With Symbols for Original Prusa Enclosure

Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…

Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
74
Polubienia
23
Ocena
5
P
PrintablesLS3print

Schuleinführung Tischdeko

Tischdeko für eine Schuleinführung. Größe (123) = 2cmx2cm Größe (ABC) = 2cmx3cm Größe (Schulkind) = 1,5cmx7cm Die einzelnen Modelle kann jeder auf eine gewünschte Größe, selber skalieren. (nur nicht kleiner da es instabil wird)…

Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
16
Ocena
0
P
Printableswizhack

Bafang bbshd brake sensor mount tektro auriga comp

FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…

Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
63
Polubienia
5
Ocena
0
P
Printableseulampia46

Happy Birthday cake decoration (La multi ani decoratiune tort, Română )

MK4 and MK3S PLA; Nozzle=0,4; Infill=20%; Layer height= 0,3 mm

Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu

Pobrania
60
Polubienia
4
Ocena
0
P
Printablescompbrain

Arducam CSI-HDMI Housing

This is a remix of "RPI Cam + Arducam CSI-HDMI" by nperto on Thingiverse that rotates the attachment 90° and attaches to the opposite side. Designed to work with the arm/pivot from…

Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu

Pobrania
54
Polubienia
7
Ocena
0
P
PrintablesLGworkshop

Flashdrive storage tray

Prints nicely in PLA, no supports needed. Since it's kind of large, I used glue stick on the print bed to make sure the corners didn't lift during print. Fusion360 file is included if you want to store more or less sticks (adjust User…

Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
2
Ocena
0
P
PrintablesUca

HDMI Port Stylus Holder

My notebooks have no place to mount a stylus, I think the empty HDMI port would be a good option. So I made them😊

Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
51
Polubienia
3
Ocena
0
P
PrintablesJurek

Guyrings DX-WIRE HD 10m

About I am sharing with you my project of another guy ring for www.DX-WIRE.de 10m heavy-duty 2013 mast. There are various *.3mf files available for diameters as measured on the mast I got from dx-wire, I hope they are consistent among the…

Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu

Pobrania
49
Polubienia
1
Ocena
0
P
PrintablesLegufix

Cookie cutter 50. birthday

A nice gift for a 50th birthday party

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
49
Polubienia
5
Ocena
0
P
PrintablesRenè Mata

Llavero del Mapa de El Salvador PLA+ HD

Este llavero, diseñado con la silueta del mapa de El Salvador , es un detalle especial que celebra la belleza y riqueza de nuestro país. Impreso en 3D con PLA de alta calidad , destaca por sus detalles precisos y un acabado suave y…

Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesOtty_Skipper

IKEA Tisken rod holder , Shower curtain Clothdryer

Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG

Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
45
Polubienia
8
Ocena
0
P
Printables3DDDS

Geschenkbox zum 16ten Geburtstag - Gift box for a 16th birthday

Geschenkbox mit Deckel in Form einer 16. Kann mit eigenen Geschenken gefüllt werden. Gift box with lid in the shape of a 16. Can be filled with your own gifts.

Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
4
Ocena
5
P
PrintablesSpace3D

Prusa mini fan noise reducer for RHD Front Fan Duct

This is my remix of: https://www.printables.com/cs/model/136666-prusa-mini-heatbreak-fan-noise-reducer made to work with: https://www.printables.com/cs/model/52553-prusa-mini-rhd-front-fan-duct

Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu

Pobrania
38
Polubienia
5
Ocena
5
P
PrintablesJT3D

support 5.1/4 pour HDD 3.5 ou SSD 2.5 - 5.1/4 support for HDD 3.5 or SSD 2.5

Support de disque dur 3.5 ou 2.5 ou SSD avec trous de fixation externes filetés pour vis 6 x 32 et supports etiquettes à l'avant. ------------------------------------------------------------------------------- 3.5 or 2.5 HDD or SSD holder…

Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesJolly

Braun Satin Hair 1 PowerPerfection HD180 Hair Dryer - Level Switch

The plastic switch of my aunt's hair dryer broke, so I did the only thing conceivable to a maker. I designed and printed the part. It took me a few tries to get the dimensions exactly right, but it worked in the end. I printed the part…

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesHolck

TRINITY2 - SmallHD Ultra5 Monitor Adaptor Plate

A small adaptor plate to mount the SmallHD Ultra5 Monitor to the existing ARRI Trinity2 brackets for the Small HD 503 (K0.0044368) or Transvideo Starlite (K0.0044367). Remove the 4 existing Torx screws from the ARRI bracket to remove the…

Wydruk około 2,40 €–2,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
33
Polubienia
13
Ocena
0
P
PrintablesValad_Amoleo

Rack for External 2.5" HDD Drives

Upload of my model created in October 2024. It was printed on a Prusa Mk3S+ and since printed on a Prusa Mk4S. All I have done here is take the excellent Rack for External Toshiba HDD Drive by @dronestationpro and modified it to fit all…

Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesJoseph Vellucci

Enterprise SAS HDD Holder

Needed a way to store SAS drives. I printed this in PLA, .4 nozzle. Updated added STL file.

Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu

Pobrania
31
Polubienia
4
Ocena
5
P
PrintablesGolenes

NorTec HDFull webcam cover

Camera hatch for Nor-tec HDFull (10 euro's at action in the Netherlands). Place the slider in at the break-point in the GCode to lock it in.

Wydruk około 1,28 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesNicval

Waveshare 7in HDMI LCD (H) holder

holder and vesa mount for the waveshare 7" hdmi lcd (H) vesa is 75 and 100 uses m3 inserts holes are 3.5mm

Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
3
Ocena
0
P
PrintablesBoris Š

CrashDerby Toy Tank

Printing instructions Base & Chassis - print without supports Hood - print with organic supports

Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
8
Ocena
5
P
PrintablesGreymanx

VELKASE Velka 3 HDPlex400 Cover

The HDPLEX SFX bracket has been out of stock for months after building a SFF PC in the VELKASE Velka 3. I opted to go with the Screw-Lock 7.4*5.0mm Female DC Jack option for use with a DELL laptop power supply. Covers the case's power…

Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesSteveW91

HHD Drawer Case

This is a cover for a PC hard drive drawer

Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesOstseefoto

Absaugadapter Einhell Flachdübelfräse

Damit das OSVAC-System auch an dieser Flachdübelfräse verwendet werden kann. Den OSVAC Anschluß habe ich von einem anderen Adapter freigestellt, den Anschluß in Tinkercad erstellt und angebaut.

Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesTomáš Čmiko

3.5" HDD Holder – 5 Drives

A sturdy and space-efficient holder designed for 3.5" hard drives , perfect for organizing and storing multiple drives safely. The holder supports 5 drives and is designed for the two most common 3.5" HDD thicknesses: 21 mm and 25 mm .…

Wydruk około 7,77 €–9,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesJan Muller

Label for Dell 3.5 HDD caddy 13G

simple clip-on tag that you can emboss text on (add negative-volume in PrusaSlicer) 0.5mm depth works well. Or you can use a sharpie. No supports, infill is not present. keywords: 3.5'' SAS SATA Hard Drive Tray Caddy for Dell PowerEdge…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
8
Ocena
0
P
PrintablesRobert Schiele

Wall Mounting Frame for LINDY HDMI Switch

To use this mounting frame remove the original case screws from the HDMI switch and replace them with some that are 2mm longer, such that you can attach the mounting frame with the cover to the base. For printing the precise settings…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesBart

usb_mini_flashdisk_grip

This model solves trouble with slippery surface of flash disk for prusa mini 3D printer. Moreover, I tried out the new Prusaslicer 2.4.0 function - indented / notched outer surface.

Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesBart

USB_flashdisk_holder

Holder of the USB flash disk for 3D printer Prusa Mini. You need also cabel “New USB 3.0 Extension Cable Up Down Left Right Angle 90 Degee” from Aliexpres.com. Why this type of holder ? My “Mini” is storaged in box and I cann't see slot…

Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
10
Polubienia
0
Ocena
0
P
Printableslvorthman

OREI HDMI Extender TV Mount

This is a TV mount for the OREI 4K HDMI over ethernet extender (model UHD-EXB400R-K). Print the model and use double sided tape to attach to your TV. Printed on a PRUSA Mk4S w/ MMU3 in Original Enclosure with Overture PLA. PLA, 0.35mm…

Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesHelle

Jack Daniels in der Blechdose

Für Sammler zum besseren stellen. Es gibt schon Varianten für nur Flaschen und Flaschen im Karton

Wydruk około 6,46 €–7,90 € nettoWstępna wycena jednego wariantu

Pobrania
6
Polubienia
3
Ocena
0
P
PrintablesmVentions

Flashdrive Shroud | Rhythm Game Instruments (Rock Band)

Description and Design Goal: Regular flashdrives are boring. Originally, this was created with the intention of storing rhythgame songs. This shroud is designed to fit the 128gb/256gb Amazon Basics flashdrive (I have not tried this with…

Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu

Pobrania
4
Polubienia
0
Ocena
0
P
Printablesgojimmypi

ULX3S Elecrow 7 inch HDMI Display Enclosure

See announcement: https://www.crowdsupply.com/radiona/ulx3s/updates/new-enclosure-and-upcoming-campaign-news Latest code: https://github.com/gojimmypi/ulx3s-elecrow-7inch-hdmi-enclosure Assembly instructions:…

Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2
Polubienia
2
Ocena
0

JBOD Enclosure 3D – Multi-HDD Case for NAS Expansion

🧰 JBOD Enclosure 3D – Multi-HDD Case for NAS Expansion This is a JBOD enclosure (Just a Bunch Of Disks), designed for DIY NAS projects like Proxmox , TrueNAS , Unraid , or even Raspberry Pi setups using SATA HBA or port multipliers.…

Wydruk około 5,23 €–6,39 € nettoWstępna wycena jednego wariantu

Polubienia
9
Ocena
0
P
PrintablesDET-Man

BTT HDMI 5 Display Voron Mount (Works with Clicky Clacky Door)

This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…

Pobrania
13 560
Polubienia
276
Ocena
4,78
P
PrintablesEDnation

BTT HDMI5 V1.2 display mount Voron

**This design is for HDMI5 V1.2** If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron Notes Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident My display came…

Pobrania
12 318
Polubienia
231
Ocena
4,97
P
PrintablesMarkGee

ChibiGrim on Skulls NEW HD version

UPDATE: Sorry, I didn't realize I uploaded the “original” remix twice, the _medres file is the new sculpt. I was wondering why everyone was printing the old version. A remix of the ChibiGrim model. Added a base of skulls for Grim to stand…

Pobrania
12 071
Polubienia
3023
Ocena
4,95
P
PrintablesMZ4250

Curse of Strahd Collection

My takes on the Characters, NPCs and Creatures of Curse of Strahd are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…

Pobrania
6440
Polubienia
483
Ocena
5
P
PrintablesSquirtle

3.5" Generic HDD Caddy

A generic hdd caddy for a 3.5" hard drive. The caddy uses 4 standartized pc case screws like https://www.aquatuning.co.uk/media/image/af/5b/d6/94577\_1\_600x600.jpg You can find a generic 5bay cage here:…

Pobrania
5958
Polubienia
474
Ocena
5
P
PrintablesHeiko

Egg holder - egg stand with changeable label MHD/BBD

Egg holder-egg box-egg stand with changeable sign for MHD/BBD m With changeable compartment to insert small pieces of paper to write down the expiration date. Always fresh eggs, thanks to this dispenser, fill the dispenser with up to 10…

Pobrania
4959
Polubienia
1270
Ocena
4,43
P
PrintablesjonnieZG

2.5" to 3.5" SSD HDD Bay Adapter - Screwless

Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…

Pobrania
4715
Polubienia
407
Ocena
5
P

PS2 2.5" HDD & SSD converter/adapter/mount/caddy

Design I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. Hardware All you'll need are some small screws to…

Pobrania
4307
Polubienia
212
Ocena
4,67
P
PrintablesCezaryKrzy

Happy Birthday!

Happy Birthday!

Pobrania
3984
Polubienia
268
Ocena
4,9
P
PrintablesRonanWarrior

Wall Mount for Fire Tablet HD 10, 13thGen (2023) and 11th Gen (2021)

Good News everyone! Now there is a version that is compatible with the 13thGen (2023) Fire HD 10 tablet. Not only that but now there is a new feature/option for physical buttons on the side of the mount for the power and volume…

Pobrania
3881
Polubienia
369
Ocena
5
P
PrintablesMoonyx

HDD Cage | 1 - 6 Bays

Updated Version Please look at version 2 of my HDD Cage as it has a lot of improvements over this version Info A compact hard drive cage for 3.5" drives that will fit most cases. Can be mounted to 120mm and 140mm fan slots, not single fan…

Pobrania
3810
Polubienia
1264
Ocena
5
P
PrintablesDopins
Pobrania
3590
Polubienia
114
Ocena
4,75
P
PrintablesTurnt

HDD Hard Disk Drive Stacker

A simple and scalable hard drive mount for external applications. Print 2 per drive and stack them up. If you stack 4 HDD's high you can attach one or two 120mm fans. Then stack blocks of 4 HDD's until it feels unsafe. If only using 1 or…

Pobrania
3523
Polubienia
517
Ocena
5

Stay-on Reusable Cable Tie in TPU. For USB, HDMI, DP, UTP and Power cables and more

It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…

Pobrania
3512
Polubienia
1028
Ocena
5
P
PrintablesJuicyLegend

4 Bay 3.5" HDD Cage

An extended version of the 2 Bay 3.5" HDD Cage made by @MattHope, because 2 bays weren't enough for me and I found this design nice. Keep in mind that general print time is 2-3 days. The dimensions of the HDD cage are: LxWxH = 160x(Base:…

Pobrania
3475
Polubienia
379
Ocena
4,5
P
Printablesrohde•labs

2.5" HDD / SSD Reference Model

I couldn't find any decent reference models for a standard 2.5" Hard Disk Drive (HDD) / Solid-State Drive (SSD) that included a non-STL source file. I've created this reference model and want to share the STEP file in addition to the STL.…

Pobrania
3371
Polubienia
75
Ocena
4,91
P
Printablesmfischer79

HDMI Dust Cover/Plug/Cap

HDMI Dust Cover cap with grip for easy removal. Check out all other port covers: USB-A port cover - https://www.printables.com/model/404578-usb-a-dust-cover-plug USB-C port cover -…

Pobrania
3361
Polubienia
339
Ocena
4,86
P
Printablesonus

2.5" to 3.5" HDD Adapter

Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…

Pobrania
3176
Polubienia
169
Ocena
4,9
P
PrintablesMakeAUsername

ADHD Highway to, hey look a squirrel!

UPDATED.14-2-2025: -Added a stand of this file to get a bureau stand. ------------------------------------------------------------------------------------------------------------ Always looking at facebook and i kept seeing this meme.…

Pobrania
3156
Polubienia
1462
Ocena
5
P
Printablesbuginside

Peppa Pig sitting, HD

High polygon version, no supports needed, very easy print. Print Settings Printer: Artillery Genius Pro Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 10 Filament: Sakata3D PLA850 Skin Tone 1 Category: Creatures

Pobrania
3096
Polubienia
79
Ocena
4,93
P
PrintablesWolfyMode

Stitch HAPPY BIRTHDAY

Its a simple model for my friends Birthday UPDATE: I uploaded V2 version with space for Neodymium Magnet so print can become fridge magnet :) Use ⌀10mm 3mm thickness Neodymium Magnet, drop it arround one hour in the print, or if you want…

Pobrania
2874
Polubienia
285
Ocena
5
P
Printablesisaacramirezd

3.5" to 2.5" HDD adapter

an adapter to perfictly fit 2.5" ssd's or hdd's to 3.5" disk bays

Pobrania
2837
Polubienia
101
Ocena
4,67
P
PrintablesPYC3D.ES

CAKE TOPPER HAPPY BIRTHDAY

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE CAKE TOPPER HAPPY BIRTHDAY Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and…

Pobrania
2801
Polubienia
312
Ocena
4,96
P
PrintablesMartin

Stargate in an off-world pedestal with a DHD

This is my model of the Stargate in the off-world pedestal with DHD. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths…

Pobrania
2764
Polubienia
694
Ocena
4,92
P
PrintablesD4rk Helmet

Modular 3.5" HDD Cage

I bought a used Case, but the HDD cage was missing. So I had to make a new one. It is pretty generic. It is designed for M3x10 and M3x16 bolts and hex nuts. I desinged it for Noctua Fans. But other fans should fit ass well. I highly…

Pobrania
2719
Polubienia
379
Ocena
4,92
P
PrintablesRetro Frog

Gamecube GC Video Support Brace for Carby, Prism and GCHD mkII

Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…

Pobrania
2696
Polubienia
156
Ocena
5
P
PrintablesVger1981

2,5 HDD drive cover

A simple cover for the old laptop drive

Pobrania
2658
Polubienia
942
Ocena
5
P
Printablesmeie1kyl

Double 2.5 to 3.5 SSD HDD bay adapter

Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…

Pobrania
2637
Polubienia
271
Ocena
4,85
P
Printablesredaeq

10, 18, 20, 21, 25, 30, 40, 50, 60, 70, 80, 90, 99, 100 th birthday geburtstag holder / stand

10, 18, 20, 21, 25, 30, 40, 50, 60, 70, 80, 90, 99, 100 th birthday geburtstag holder / stand for…..the XX th birthday ;) Also check out these models:…

Pobrania
2472
Polubienia
105
Ocena
4,83
P
PrintablesOlof Ogland

Prusa Mini RHD Fan Duct Rev. C

A remix of the fantastic RH_Dreambox fan shroud for MK3 to fit the prusa mini. Files fitting both original Mini and Rev 2 included. https://www.thingiverse.com/thing:3249344 Print instructions EDIT 2021-02-16 The shroud has been lowered 3…

Pobrania
2444
Polubienia
470
Ocena
4,77
P
PrintablesMZ4250

Birthday Cake Mimic

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Pobrania
2433
Polubienia
105
Ocena
5
P
Printablestakman29

KUMATY : Polar Bear "Happy Birthday" Pack

Polar Bears are celebrating, "Happy Birthday"!! Added "Feliz Cumpleaños" (4/18/22)

Pobrania
2392
Polubienia
341
Ocena
5
P
PrintablesPivan

Happy birthday

Happy birthday

Pobrania
2360
Polubienia
143
Ocena
5
P
Printablesywabiko

Waveshare 7" HDMI LCD (H) Case

(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…

Pobrania
2298
Polubienia
141
Ocena
5
P
PrintablesMattHope

2 Bay 3.5" HDD Cage

I needed to replace the hard drive cage in my case to make more space for the GPU. However, I still had 2 hard drive that I wanted to keep. I liked the 2 bay model from @squirtle but I needed a way to mount it to my case with M4 screw.…

Pobrania
2201
Polubienia
164
Ocena
5
P
Printablesnpopson

3.5" HDD Rack / Caddy / Holder (6 drives)

Attach the baseplate using simple 2-sided tape. The weight of the drives will keep it secure during normal use. Support: If you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of…

Pobrania
2032
Polubienia
464
Ocena
4,92