1566 modeli
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Simple stand for the ZimaBoard that can accommodate two 2.5" drives based on the rack mounted module I have created. It is available in two variant: Original ( zimaboard-hdd-stand.stl ): which can accommodate up to two 9.5 mm high 2.5"…
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
I could not find the right adapter. That's why I designed this for my "be quiet" case. I tried to keep it as simple as possible. It should work for other 3.5 "bays of course. Print instructions Category: Computer Print Settings Printer…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Simple stand for the ZimaBoard that can accommodate two 3.5" drives based on the ZimaBoard Dual HDD Stand created by orax . Assembly You need unscrew and remove the lower plastic plate from your ZimaBoard and reuse the screw to mount it…
Wydruk około 4,14 €–5,05 € nettoWstępna wycena jednego wariantu
3D printed 2.5" HDD Enclosure A simple 3D printed case for an old 2.5" HDD. The case is designed such that, for the most part, it is a push-fit, with four nuts at the bottom, mounting the drive to the plastic case. Equipment List 4 x…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Put all your spare disk drives in one place. Use this to organize a spare parts pile or line up your cold spares for your NAS. Fits 8x 3.5" disk drives and 3x 2.5" disk drives. Print settings: WARNING: Large print across entire build…
Wydruk około 17,35 €–21,20 € nettoWstępna wycena jednego wariantu
Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zalman Z3 Plus HDD rails Yes support PLA
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…
Wydruk około 35,01 €–42,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
I created a sleek housing for my Odroid N2+ NAS. It was printed with white PETG to give it a modern look and make it more temperature resistant, but I could imagine that with the current cooling (80mm FAN) PLA could be used as well. It…
Wydruk około 22,82 €–27,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Keeps a need stack of to coasters repurposed harddrive platers. Instead of throwing your end-of-live disks to the public garbage. And perhaps spending time making sure your data is not thrown away with them. FYI It's pretty easy to open…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support de disque dur 3.5 ou 2.5 ou SSD avec trous de fixation externes filetés pour vis 6 x 32 et supports etiquettes à l'avant. ------------------------------------------------------------------------------- 3.5 or 2.5 HDD or SSD holder…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
Upload of my model created in October 2024. It was printed on a Prusa Mk3S+ and since printed on a Prusa Mk4S. All I have done here is take the excellent Rack for External Toshiba HDD Drive by @dronestationpro and modified it to fit all…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a way to store SAS drives. I printed this in PLA, .4 nozzle. Updated added STL file.
Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu
I needed a wall mount for my Toshiba HDD and remixed this one, to print it without support. And also added holes for the led :) Category: Computer Remix of: https://www.thingiverse.com/thing:3552508
Wydruk około 3,40 €–4,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A sturdy and space-efficient holder designed for 3.5" hard drives , perfect for organizing and storing multiple drives safely. The holder supports 5 drives and is designed for the two most common 3.5" HDD thicknesses: 21 mm and 25 mm .…
Wydruk około 7,77 €–9,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A generic hdd caddy for a 3.5" hard drive. The caddy uses 4 standartized pc case screws like https://www.aquatuning.co.uk/media/image/af/5b/d6/94577\_1\_600x600.jpg You can find a generic 5bay cage here:…
Design I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. Hardware All you'll need are some small screws to…
Updated Version Please look at version 2 of my HDD Cage as it has a lot of improvements over this version Info A compact hard drive cage for 3.5" drives that will fit most cases. Can be mounted to 120mm and 140mm fan slots, not single fan…
A reference model to use
A simple and scalable hard drive mount for external applications. Print 2 per drive and stack them up. If you stack 4 HDD's high you can attach one or two 120mm fans. Then stack blocks of 4 HDD's until it feels unsafe. If only using 1 or…
An extended version of the 2 Bay 3.5" HDD Cage made by @MattHope, because 2 bays weren't enough for me and I found this design nice. Keep in mind that general print time is 2-3 days. The dimensions of the HDD cage are: LxWxH = 160x(Base:…
I couldn't find any decent reference models for a standard 2.5" Hard Disk Drive (HDD) / Solid-State Drive (SSD) that included a non-STL source file. I've created this reference model and want to share the STEP file in addition to the STL.…
Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…
an adapter to perfictly fit 2.5" ssd's or hdd's to 3.5" disk bays
I bought a used Case, but the HDD cage was missing. So I had to make a new one. It is pretty generic. It is designed for M3x10 and M3x16 bolts and hex nuts. I desinged it for Noctua Fans. But other fans should fit ass well. I highly…
A simple cover for the old laptop drive
Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…
I needed to replace the hard drive cage in my case to make more space for the GPU. However, I still had 2 hard drive that I wanted to keep. I liked the 2 bay model from @squirtle but I needed a way to mount it to my case with M4 screw.…
Attach the baseplate using simple 2-sided tape. The weight of the drives will keep it secure during normal use. Support: If you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
A generic 5 bay 3.5" hdd cage. Here is the 3.5" hdd caddy that goes with it: https://www.thingiverse.com/thing:4106276 I made a cage for the Thermaltake V21. I have not yet printed this exact model. However it works perfect for the…
For Xbox 360 Slim and Xbox 360 E. -all screw holes had 1 centimeter diameter counterbore, should support most generic PC HDD screws -holes for a pull tab, use scotch tape. -thick pry hole for when the pull tab was unusable/broken, use a…
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
Adapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.…
Design I had originally designed a 2.5" HDD Caddy for the PS2, and then recently found out that a certain company had used that to make a commercial remix to support 3.5" drives. All my models are released as non-commercial to avoid such…
This design is a modular HDD rack system that allows for flat printing and can be assembled in any number of drives you'd like. I've also designed a backplane to allow for hot swapping of drives and outputs to a SFF-8087 connector to…
The TerraPi Xtreme DUO is an open Raspberry Pi NAS case, featuring two HDD 3.5" slots . A set of USB3 to SATA external power adapters are required to connect the drives to the Pi. You can buy those from your local market, to ensure that…
Holds up to 5 HDD 3.5". I printed the box at a layer height of 0.2mm with a 0.4mm nozzle. It took about 12 hours. For size 2.5", go to : here .
Made this hard drive case to compliment my Orange Pi 3 LTS case. The cable I use with this is a Startech SATA to USB 3.0 adapter. While not a rugged case. It's more or less designed to add a little bit of protection while this Pi and HDD…
This is a Remix inspired by and combined from these two models: 10-inch Rack Mount Hard Drive Cage by pierrejc0 10 Inch Rack Vent Panels by n3rding I didnt like how most 10" Rackmounts use caddys from Dell or HP, most people wont change…
SSD Stackers (as well as the old "Dual SSD Stackers") are meant to allow you to stack and mount two or more 2.5" drives (SSD or HDD) together, and then be mounted in desktop computer cases that have mounting holes for only a single drive…
BOM Part Qty Image M4 Heatset src 1 src 2 12 M3 Heatset src 1 src 2 8 M4x5mm (BHCS preferred) 7 M4x10mm (BHCS or SHCS) 5 M3x10mm (BHCS preferred) 8 Jonsbo N3 Backplane src 1 (verified) src 2 src 3 src 4 I also designed a 7-drive version…
A very basic part for my computer. I made two versions, one with a bottom part that keeps it all together, and one with the two sides as separate pieces for faster printing with less material (and fits on smaller bed sizes) Originally…
i recently started putting together a super tiny NAS, with rust disks for storage. but the compact case i bought (a Silverstone Sugo SG13) only has real, usable space for one 3.5" HDD. i found a mounting bracket/plate (original, linked)…
This is my second case for RPI4 (previous: https://www.thingiverse.com/thing:4715068 ) Now I used 40x40x10 fan, or can be used 40x40x20 fan. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version ( Cults3D ). Added a new option with hole for HDD. External HDD max dimension (LxWxH): N/A…
Updated to version 2 in order to fix the drive rail STL. For print settings and more information see the project web site . Some notable points about this design from the web site: This is a rigid structure that does not flex much and…
This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner…
This is an HDD tray for a Fractal Define 7 XL (and other models) with an optional SAS protector. The tray is a drop-in replacement or alternative to the original “FD-A-TRAY-001” tray from Fractal Design. Or also called “HDD Tray Kit -…
Print the caddy with support attaching the print base. The screws are available at Amazon, Ebay, Aliexpress, … They look all the same for me.
Rack/stand for 4x 3.5" HDDs. Print one for each side. I used fairly standard hard drive screws, found in basically any computer hardware store. I added a flattened version to print laying flat, inspired by BrewKnell's make, which shortens…
For a detailed guide on how to put this together, please visit our article here: https://www.corsair.com/explorer/diy-builder/cases/3d-printable-hard-drive-cage/ TL:DR - We have made two versions: Infinirail version - fits FRAME 4000D…
I recommend to add some foam in to the slots so the HDDs won't wobble around.
This is a stackable HDD Caddy with ventilation; -Has lip to catch edge of HDD so it stays in place (middle screw option as well) -Stackable -Suitable for storage of Offline HDD or a working Cage for multiple HDD. Superglue the tabs…
I wanted an affordable DIY NAS case that fits 8 HDDs, no external GPUs or huge power supplies.I built this to fit an mATX board , as they're cheaper than microATX and give more space. I managed to fit a SAS LSI card. A low profile CPU…
Inspired by a model at thingiverse (https://www.thingiverse.com/thing:3544454) But needed something to be laser cut. Designed to enclose the drives, which is why the ends are not symmetrical. You will (obviously) need two identical parts…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SC93301 or MCP-220-00075-0B HDD Status LED's are functional with additional 2mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" I have a pair of…
SSD HDD caddy mounting for HP EliteDesk ProDesk. Just add M3x8 screws and you are all good to go.
Update 2026-03-25: Migrated files to FreeCAD 1.1.0 Stable. This adapter allows you to convert a 3.5" drive bay into a triple 2.5" SSDs/HDDs drive caddy. Unlike bolted adapter designs, you can easily replace individual drives without…
Remix of the 2,5" version to fit regular 3,5" drives Designed to get the maximum slots on one regular 200x200 printer. This is for the regular sized drives, (26mm thickness) but the smaller ones fit just fine too. Print Settings Rafts: No…
credits to https://www.thingiverse.com/dphirschler/designs I really liked the ‘minimalistic’ design in comparison to any other models had seen and was my first ever make once i put my hands on a 3d printer to almost complete a project…
I created this case for a Pi 4 (with POE HAT), a 2.5' Hard Drive and a SATA to USB adapter. There is a slot on the IO side of the case that can be used to store the excess cable for the SATA to USB adapter which makes this case slightly…
NEW VERSION HERE 3U cage to mount up to 6 3,5" SATA drives in a 10 inch rack cabinet. 2,5" SSD are supported with the provided adapter. Do not print in PLA. The heat and the weight WILL eventually deform it. Requires a 10"+ build plate…
I lost the original rails so I copied the one I still had. I made this for the Cooler Master Silencio S600 but it should fit other Cooler Master cases as well. Let me know if it works for your case. The drive is mounted with 4 standard…
This is a remix of the original 3.5” HDD caddy designed for the PlayStation 2. It was was created to address specific needs for taller HDDs and enhanced usability. Like the original, this caddy supports both IDE and SATA (converted)…
This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF ( no hardware required ). This mount should fit almost all 3.5 inch HDD and should also work in other HP EliteDesk and ProDesk computers. It is meant to…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version ( Cults3D ). Added a new option with hole for HDD. Fixed the wrong model in the files.…
After 5 years of testing and many modifications, this is likely the final version. (I was wrong, I found that a little extra rigidity helped when using on a dell/hp slot or rail mounting system, v8 helps with that) We have fixed all…
low material HDD adaptor for 5.25 x 4 bay everything is provided. you will want a fan to keep the drives cool. I use it in my NAS to hold more drives.
Link to Squirtle model: https://www.printables.com/model/40826-35-generic-hdd-caddy/files I have printed out the hdd caddy airflow.stl from Squirtle to use with my HDD rack. Suggest a print profile with some support and 0.2 layerheight…
Accidentally broke the locking tabs on mine, so I laser-eyeballed the measurements based on what wasn't broken and eventually got it here, where it works. Thanks to thomhoess for the base shape, saved me some time trying to measure it out…
Modular HDD bracket for older Phanteks cases (Evolv ATX, Pro M, orP400/P400S). Recommend printing standing up so that the mounting face is on the print bed. The screw holes are sized to allow the standard HDD mounting screws. Printed with…
A simple drive bay for 4 Dell 3,5" LFF HotSwap HDD caddys. The SATA/SAS Connetion at the back is not mounted, the rear of the HDD is exposed to plug in manually. Fits a 120mm Fan on top for cooling Printing orientation: on its "back" with…
We designed this to allow for drive expansion on our data recovery server. It has fit all standard optical bays we have tested it in and allows you to fit an extra 2.5" from the bottom or 3.5" drive from the sides. If you find any…
2.5" SATA HDD case Should fit very tight and precise
Printed with 0.32 mm layer height, 5% triangle infill and no supports. Fits Fujitsu PRIMERGY TX1330 M1 case. This other adapter also fits the case.
Universal 2.5" SSD/HDD to 3.5" NAS bay adapter. Required when the SATA connector in the bay is fixed, so the disk has to sit in the exact place. This frame is rigid and simple, and is designed for fast print and maximal performance with…
Adapter for the 4,1 and 5,1 Mac pro (2009-2010) to fit smaller HDD or SSD on the mount meant for bigger HDD. It will only work with SATA drives, because that's what the computer uses. The 4 small printed bolts are not strictly necessary…
Simple HDD Holder, up to 15 drives. Fit 70x100x10mm Drives Print instructions Prusa 0.2/0.3 Speed Preset
Ho reso il modello più uniforme e veloce da stampare mantenendo la sua robustezza
The possibility of adding modules as desired 9 mm for SSD 12 mm 2.5" standard drive VER 2: https://www.thingiverse.com/thing:2768186 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No…
2.5" HDD and SSD Holder – 5 Slot Organizer 💾✨ Keep your 2.5" HDDs and SSDs neatly organized with this practical 5-slot holder ! Perfect for tech enthusiasts and professionals alike, this holder ensures your drives stay secure and easy to…
I wanted to use a low profile PCI slot to mount a 2.5" SSD in a 2U case for my Unraid server but I didn't see any manufactured nor any available to print out. So, I designed my own. I've not yet got to install it as I'll have to make time…
This is a stackable rack for external HDDs. The body can be printed multiple times, stacked on of each other with a dowel joint and covered with the cap. The ribs under the HDDs raise them and the holes on top, bottom and sides provide…
I found and printed this great model, but wanted a variant that I could put on the top which didn't have the tabs used for stacking to improve the look. Printed in eSun Pine Green PLA+. Original Description: This is a stackable HDD Caddy…
Modified version of the original model that is now stackable
Made in accordance with the blueprint specs. 7mm tall drives are usually SSD, while 9, 12 and 15mm are HDDs.
This is a custom HDD caddy for the original Xbox. Transferring files over FTP is capped at 10MB/s, which can be painfully slow. I wanted a faster way to move files by taking the drive out and connecting it directly to my PC. The problem…
Updated here: https://www.printables.com/model/1167488-small-hdd-adapter-35-inch-to-25-inch-updated
A reference model to use
I recently repurposed an old i3 PC as a home sever, one of the uses is as a NAS and I needed a bracket to hold all my drives. I have included a Zip with the DSM files so you can edit however you see fit.
2x4x5 gridfinity bin for storing 3.5" hard drives. Includes a top piece for stacking more gridfinity bins!
This part allow to hold your external hard-drive cable. You need this part and a rubber band. Simple and efficient.
This model is a modification of this project: https://www.printables.com/model/1290788-10-inch-rack-1u-2-x-35-inch-hdd-hot-swap There are 2 versions of this project: 1. If you have large printer you can print the combined version 2. If…
