825 modeli
This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
This storage case doubles as a stand for a Waveshare 7inch Capacitive Touch Screen LCD . 4x M3 x 8 mm socket caps screws for the main case 6x M3 x 8 mm socket caps screws for the hinges 6x M3 nuts also for the hinges The 12 optional…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Dopo aver analizzato le varie soluzioni trovate, ho deciso di progettare un box, per la scheda Einsy e il Raspberry Pi4, di mia iniziativa. Questo non è un remix ma un mio progetto. Ho cercato di includere ciò che serve alla stampante,…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
This 2-part case is designed for the Waveshare HDMI to CSI adapter card. This card is used to convert the video signal from an HDMI device to the CSI connector on a Raspberry Pi. It can be used to interface HDMI webcams (like a GoPro) to…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
This is the Amiga 600 version of my RGBtoHDMI adapter Amiga 500 Version. For assembly instruction look at the Amiga 500 version. https://www.printables.com/model/63688-rgbtohdmi-adapter-housing-for-amiga-500
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
The model does not require any supports.
Wydruk około 3,12 €–3,81 € nettoWstępna wycena jednego wariantu
This is a remix of "RPI Cam + Arducam CSI-HDMI" by nperto on Thingiverse that rotates the attachment 90° and attaches to the opposite side. Designed to work with the arm/pivot from…
Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu
My notebooks have no place to mount a stylus, I think the empty HDMI port would be a good option. So I made them😊
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This bracket was designed for the HDMI Splitter PT-SP-HD14DA HDMI from PureTools. Device dimensions 190x100x20mm Designed in Onshape…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
holder and vesa mount for the waveshare 7" hdmi lcd (H) vesa is 75 and 100 uses m3 inserts holes are 3.5mm
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
I got this screen that is super compact with the Pi and had fun designing a case for it. The idea was to do it with one part so it can easily just slide in and out. The screen was called the "4.3inch HDMI LCD (B) - 800x480 - IPS -…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a TV mount for the OREI 4K HDMI over ethernet extender (model UHD-EXB400R-K). Print the model and use double sided tape to attach to your TV. Printed on a PRUSA Mk4S w/ MMU3 in Original Enclosure with Overture PLA. PLA, 0.35mm…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
A wall mount for the Marmitek Connect 621 UHD HDMI switch. Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The wall-side is made pretty beefy (18mm thick), but this fits my personal setup…
Wydruk około 10,70 €–13,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…
**This design is for HDMI5 V1.2** If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron Notes Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident My display came…
It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…
HDMI Dust Cover cap with grip for easy removal. Check out all other port covers: USB-A port cover - https://www.printables.com/model/404578-usb-a-dust-cover-plug USB-C port cover -…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…
(Update 3/27/2024) Added Pi5B Bottom/Lid. (Update 11/14/2019) Added Pi4B Lid. (Update 4/12/2019) Uploaded IGES model files for easier remix. (UPDATE 3.28.2019) Pi3B Case: improved structural strength by slightly thicker walls. Desktop…
I made this screen holder for my Voron 2.4 350, I printed another screen holder on here, but it really wasn't the quality that i was looking for with my Voron. It looked cool but I couldn't bring myself to use it due to screw alignment's…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…
There are tons of cable ties to download, but none of them check all my boxes. I wanted a cable tie that can stay on the cable if desired, is easy to use, easy to print, and costs minimal filament. So I ended up designing one myself. This…
I used the dimensions from the BIQU store page for this model since they do not yet have it on the github page. I actually printed a slightly different variation of this file since I used L adapters for both the HDMI and USB C ports which…
(Update 11/25/2019) Added the latest version STL files (that matches with IGES ones). (Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Elecrow 5inch…
Thank you all, who downloaded this design. I want to also tell you that unfortunately you will need to print the cover again. The small print. I found an issue thanks to all of you who have told me Later Edit : April 30, 2024 Added the…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. EYEWINK 7inch HDMI Display-C Mount…
Case display 7" HDMI BigTreeTech If you want to support my work, buy me a coffee PRINT SETTINGS: nozzle: 0.4mm perimeters: 4 infill: 15/20% layer height: 0.2mm Top/bottom layers: 3 I share the Step file with you, so you can remix it to…
This design is for HDMI5 V1.1 If you are looking for HDMI5 V1.2 mount, use this one: https://www.printables.com/model/926845-btt-hdmi5-v12-display-mount-voron Design intents There are existing mount for the HDMI5 but I ended up…
This is a fun print that combines two things that don't belong together. You really can't say it's useless because you could totally use it as a spray nozzle on your garden hose with an HD water stream... This was a combination of two…
The case is integrated in place of the central part of the skirt, without modifying the existing skirts on each side. I made an opening for access to the screen settings buttons, and I put it underneath so that it is not visible. The…
This is a cover for the raspberry pi 4 with touch screen MPI3508 (3.5 inch HDMI) Print in 2 parts: bottom (no support) top (with a hole to hang or a honeycomb) (small support for the holes) Optional parts: fan connection (with 2 or 4 snap…
Tested and useable display case to be able to use the Bigtreetech HDMI5 Display in version 1.2 (Backside connectors) with the Sovol SV08 printer. ## Print settings * 4x Walls * 5x TopLayers/Bottomlayers * 20-40 Infill * Tree support
.2 Layer height Whatever infil but I did 20% No supports needed 5 M3x10 socket head screws 4 M3 heat set inserts 4 M3x6 button head or socket head screws
A simple HDMI display / monitor cable organizer. it's a quick print (takes 50min) but yet helpful to tidy around a display. Just stick it on the backside of your display using some double sided tape. A small slot is made to clip a slim…
Removable BTT HDMI7 Screen Case Can swivel and screen can be easily removed and slided back in. Included a knob to tight the screen in the correct orientation. Printer RatRig V-Core 3.1 Infill : 15
This is left skirt which goes with https://www.printables.com/model/608317-btt-hdmi5-screen-mount-for-voron-24. Print Mirror for right side. Use skirt as per printer size.
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
This is Mount for Voron 2.4 to fix BTT HDMI5 as fixed screen This design works for 250Cube, 300Cube and 350Cube models of Voron 2.4 Goes with skirts at…
anti-dust cover hdmi ports, i tested it on Lenovo Y410p and Lenovo y700.
7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…
Plugs for Display Port or HDMI ports that are easy to unplug, secure, uniform and looks tidy on your computer case. Designed for 3d print so no overhang ! Print with the seem on a flat side so you can clean up the bump easily (see…
This is a BigTreeTech HDMI5 1.1 case. Screen screws in the “ back ” part and the case “ front ” part snaps to the “ back ”. 3 different angle brackets (25°, 45° or 90°) which slide in to the " back " part. Each of these brackets have…
Regarding the HDMI screen mount position, Sovol's original design is not mounted on the LCD screen, while with the latest feedback, many customers think it should be mounted on the LCD screen's position. So, we designed the Display…
Buttons and ports are easily available without the need for tools. All plugs, cables and ports fit perfectly into their slots. Designed to be screwed to a smallrig 1598 cheese plate. (optional) Make sure your printer is properly…
This case is designed for the RGBtoHDMI project and is compatible with all versions of the 3-Bit, 6-Bit and 12-Bit versions. UPDATE : 22 July ‘22 - Improved snap fit and made the text deeper so it’s clearer to read.…
This replacement case for the HDMI version of the OSSC will protect the sensitive circuit board while still allowing easy access to all of the ports and has built in ventilation holes to keep it cool. To assemble it, use four M2.6 x 12mm…
Remix of PITFT50 Mount for the BTT PITFT50 HDMI by CannedBass https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/CannedBass/PITFT50_45_degree_mount BOM: 4x M3 Brass Inserts 4x M3x8 FHCS 2x M3 Hammer(T)-Nuts 2x M3x8 SHCS
Perfect fit for hdmi cable cover. 0.2 layer height, printed in pla.
UPDATE: A new version for this LCD case is here. Waveshare 7inch HDMI LCD(C) Case A case for 7-inch Touch HDMI LCD (C) ) that is sold by Amazon and Aliexpress etc. 4 small wood screws #2x1/4 or so are recommended to assemble (of course…
I needed a cover for my BIQU HDMI5 touch display I found this from Armourist and used/adapted it to another 7" display that works really well with a nice and functional design. Feet are reversible and you can use them with 15 and 30 deg,…
I wanted a decently good looking wall mount for the hmd + controllers, and none of the existing ones really checked all the boxes for me. Controllers I liked how the AMVR mount held the controllers, but I prefer printing stuff like this,…
No hardware is needed apart from the 4 OEM screws. Case The case has cutouts for all the screen's ports and buttons. It mounts on the screen with the 4 OEM screws. I also created a bezel to compensate for the thin gap on the bottom of the…
they added a speaker/moved connectors which interfered with mount
So i love this model as it looked better then the other mount available for the SV08 but the original required drilling into the base and using heat inserts. I figured I would try adding the tabs from the original screen and it worked! I…
Print using standard Voron settings. I use abs mostly but being this is a skirt I think PLA would be fine. Let me know if you guys would like me to change anything 0.2 layer height 4 walls 40% infill Bed temp 110 Nozzle temp 245
The 3mf-file has two segments. If printed unaltered it will produce the wall mount in one piece, but by just moving one of the segments a dovetail joint will become visible and the wall mount will be printed as two separate pieces.
It fit for the BTT 5" HDMI Screen V1.1 and V1.2 at the Original Screen Place. Print with 4 Walls and 20% Infill Auto supports work well.
This model is designed in Google Sketchup For 7 inch HDMI display H modal which has side buttons for LCD menu U need threaded inserts 5.7 height 4.6 dia 3m thread size and u have to insert it using soldering iron even you can use any kind…
This is a mount for the BTT HDMI7 display. Was designed for a vcore-3 but should work on any 3030 or 2020 extrusions. It includes 2 different mounting pieces for 3 different mounting options. Use 2x mounting feet facing up or down to…
Adjusted this excellent model to fit this generic 7 Inch LCD touchscreen from Aliexpress - specifically the IPS version. 7 Inch Raspberry Pi 4/3/2/B/B+/A+ Monitor 1024x600 IPS 5-Points Capacitive Touchscreen Drive Free HDMI Display For…
Sovol SV08 HDMI screen holder (remix) The original part seemed a bit too wobbly to have. When the printer worked a bit the screen began to shake a lot because of the gap in the part. So i removed that gap and made it stiffer therefore. =)…
A clever designer decided to place the USB port right next to the HDMI port. Often when I try to plug in a USB device, it ends up in the HDMI port. Urgh. This plug covers the HDMI port, protects it from dirt and makes it impossible to…
For when your rtx 1660 has had a long day.
I didn't have any luck finding a case or a mount for my BTT HDMI5 1.1, so I made this one. Here are the print settings for the one in the photos: SunLu PETG 0.2mm layers 75% infill No supports (mostly) For the bracket, I printed it on…
Description: Allows to mount FX-USB and FX-HDMI1 keystone adapters inside of standard Voron Skirt. Compatible with: keystone FX-USB (EAN: 5902887017513) - voron-skirt-keystone-inside-usb.stl keystone FX-HDMI1 (EAN: 5902887005220) -…
This 10 inch server rack plate was designed for building Raspberry Pi5 NAS servers , it securely holds two SSD units , optimizing storage density in a compact 5U by 1U form factor compatible with standard home lab racks. Ideal for RAID 0…
Uses 1 ADT-Link A7-A8Q HDMI 2.1 15cm Extension and 2 ADT-Link P7A-P8T-BL DisplayPort 1.4 15cm Extensions. Onshape Link
hdmi cover tolerance fits for pla Category: Gadgets
This custom cover is made specifically for the Type-C PD and HDMI mods to perfectly fit the PS2 Fat model (tested on the 5xxx series). 🛠 Key Features : Designed for this PD trigger : AliExpress PD trigger . Made for this HDMI mod :…
It's a mount for BTT HDMI5 screen. It is designed to be mounted on Elegoo Neptune 3 Pro/Plus/Max It is designed to use M3 threaded inserts in the bracket with M3 screw to connect the screen case to the mount. UPDATE: You can now choose to…
Update June 13th 2017 Uploaded two new revisions. Version 1.1 adds a second 2mm screw mounting location for a firmer fit. The second revision was a request to extend the mounting holes ta attach screws through the board and into the…
Display enclosure for the the 7 inch Waveshare screen. Suitable for the model with 1 x HDMI in and 1 x USB Touch USB input. Uses 4 x M3x10 screws on the back. Update 25.11.2024: Added back panel with VESA Mounting holes Added a VESA Mount
The Pimax Dream Air has a small box on it's cable that combines the two cables coming out of the headset. This box routinely gets in the way, getting caught on high backed chairs, and also gets warm when sitting on your neck/shoulders.…
These are cases for the VGA or HDMI version of the ZX Murmulator ZX Spectrum emulator PCB. I made it from a generic case design imported into TinkerCad and very extensively modified by scaleing and adding components and cutouts to fit the…
Later Edit: I have pre sliced the files and uploaded them in the correct position for download. I have added some .3mf files just for reference to see where you need support. We had a lot of requests to do this mod to be perfectly fitted…
Description Case for the BTT HDMI 7 with a joint and base plate for printers with 2020 extrusions. The case is designed to be printed in one piece. Case and base are original while other parts are reused or remixed from the two models…
You can print this in any layer height your printer supports, though I'd suggest going for 0.2 or 0.25. If you enjoyed this print, please give it a like and feel free to buy me a coffee using the paypal button on the right. ;-)
I made this stand for the PS2HDMI adapter so it doesn't hang and put stress on the AV port of the PS2. This stand should work on both the Slim and Fat models. This has a really tight fit, but after putting it and taking it off one time,…
Case for BigTreeTech HDMI5 display V1.2 with outlets to the back. Different mounting options. The backplate has different mounting options for landscape or portrait in different positions. Just chose the screw holes for your needs. You…
Mellow Fly HDMI 7 LCD touch screen case & mount for 4040 *** FINAL UPDATE on 1/8/25*** DEPENDING on your printer tolerance you may need 1 or 2 washer on each mount for the screen to back panel. If downloaded on or after 1/9/2025 you…
I wanted a similar mount to the BTT TFT50 display on the SV06 however they use different connections and mounting and size, and I wanted to make sure the footprint was not going to go crazy on the horizontal position its only between 12…
This case is for a Raspberry PI 5, NVMe M.2 Base hat, and HDMI Adapter Board. Providing two power supply support methods and dual 4K Outputs. Uses the Micro HDMI-compatible To HDMI-compatible Adapter Board and Pimoroni NVMe Base hat with…
This is a remix of Nadir's HDMI5 Display Mount for the SV08 to keep the original screen and add the HDMI5 to the side.
its inspired by this https://www.printables.com/model/413639-removable-btt-hdmi7-screen-case/remixes but I ended up remodeling the entire thing because the BTT screen has very uneven bezzles and the old design did not take care of it… I…
Case for an XPT2046 LCD screen, usable in Raspberry Pi (or other) projects Hardware: 4x M3 16mm screws 4x M3 nuts
Screen mount for the BTT HDMI5 screen. Fits most Creality type bed slingers. The larger top part will need some supports for the inner part. To install - Place the screen into the back section first (screenbottom.stl). The back piece…
This bracket is designed for the SSUPD Meshlicious, to provide a more comfortable access to the video output ports. We have optimized the bracket for ADT Link DisplayPort and HDMI cable. You could use the bracket with the following ADT…
Mounting bracket compatible with flat mesh skirt for Ender 3 NG . Dedicated for BigTreeTech HDMI 5 v1.2 display. Requires 4x M3 heat set inserts to connect with the skirt and 4x M3x8 screws to secure the display. USB and HDMI cables…
A simple case and mounting bracket to use BTT's HDMI7 v1.2 on a Sovol SV08. It mounts on using lugs like the original screen. Will probably block enclosure doors if you have them, I don't have the enclosure kit. I think it'd need a…
I designed this clamp to reduce stress to the HDMI- and USB-connectors while using the camera connected to monitor or capture card. In addition to keeping the connectors in place, cables can be tied to the clamp body. This was designed…
Saw the Fallout-style retro terminal design of Arthur Guy ( https://www.thingiverse.com/thing:4567037 ) & Mike Tong ( https://www.thingiverse.com/thing:4808443 ) some time ago, and felt that was very cool. So to make another one for the…
Mount for BTT HDMI7 on RatRig V-Core 4 (with or without Enclosure) This mount allows you to securely attach a BTT HDMI7 v1.2 display to your RatRig V-Core 4, whether you have an enclosure or not. For earlier versions of the HDMI7, use the…
I loved the North Pi and was grateful that Fractal released stl files. My only issue with it was that all of the IO was at the top. I have recreated the design and updated it to support a Waveshare.com pi5-connector-adapter (27009) for…
Case for a KD070V02 7 inch LCD monitor I got on AliExpress. 2 versions for the front. One uses M3 threaded inserts and the other you just screw directly into the plastic using M3 screws. https://www.aliexpress.com/item/1005006428560580.html
Ich habe dem Case Heatinserts in M3 Short verpasst, sowie einige Maße angepasst. Die Druckzeit ist hierdurch kürzer. Durch die Heatinserts ist es nun möglich den hinteren Gehäusehalter jederzeit neu auszurichten und der Ausbau vom Display…
I made my own version of cable holders, designed for USB-C cables with low usage of filament. One for 2 cables with 4mm diameter One for 4 cables with 4mm diameter One for 3 cables with 8mm diameter The one for two cables with 4mm…
Use support under voron logo.
Sovol SV08 MAX Tophat – 7" BTT HDMI V1.2 Display Add-On This is a remix of the Sovol SV08 MAX Tophat that allows you to install the BTT 7" HDMI Display in the top-right corner of the enclosure. SV08 MAX Modular Top Hat If you already have…
This is a remake of my original single HDMI version. Look here for that design, and more detailed assembly. https://www.prusaprinters.org/prints/63688-rgbtohdmi-adapter-housing-for-amiga-500
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
