Liczymy pasujące modele…
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…
Folding Shoe Rack or Shelf - Print-in-Place When the whole family comes to visit again, just unfold your foldable shoe rack and the mess will disappear. It could also serve as a temporary shelf, e.g. for DIY projects. Printing Print the…
Large pegboard shelf made for 1"c2c ¼" pegboard. The model is designed to use no support. Shelf dimensions are 8.5x5" of usable room. I recommend making from a sturdy material i.e. not PLA. Mine is made from CF-PETG.
Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…
This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…
Simple legs to convert any Ikea Ivar shelf to the free-standing table/desk/shelf. Use one wood screw (for each leg) that fits and small enough not to puncture the shelf through. My gf used it as a displey riser and workspace organiser. We…
Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.
These shelf brackets mount on the previously existing curtain rod screws in my bedroom. Your screws will need to have a thread diameter of <0.2" and a head diameter of <0.35". There are also holes on the bottom if you want to screw the…
I found plenty of shelf brackets on Thingiverse but I wanted one with the bracket coming from above the shelf rather than supporting the shelf from below, to blend in with my Seville Classics lighted workbench that has a cantilevered…
The shelf bracket was inspired by generative design. The original generative design calculation has been simplified and strengthened in the VR environment and optimized for 3D printing (no support required). Software used: Fusion 360,…
You can see in the pictures how to set it up. I used used seven 3,0mm x 16mm wood screws. The G-Code is made for Filamentum PLA. If you want to slice it yourself, make sure to set “Loops” at the “Skirt” settings to 0. The print needs the…
Speaker stand for the Edifier R1280DB. There is enough room around all edges to easiy modify for different speakers. See the attached pictures for the dimensions. This will give the speaker a +- 13 degree angle.
Brought home a bargain shelf, only to find it's a bit wobbly? Don't fret! These 3D-printed brackets are your wobble-busting heroes! This design features both left and right brackets , each securing the shelf with 4 screws (2 vertical, 2…
This construction was made to combine a raspberry pi 4 in its cooling fan equiped case with two external 2.5" hard disk drives as a self made NAS built with OpenMediaVault. The required USB hub is not part of this built, I keep it in a…
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
Link to improved version Small display shelves inspired by the hangar of an imperial star destroyer from Star Wars. Designed for vase mode. Its 18cm wide, 16cm deep and 10.2cm tall on the outside. (It fits barely on my prusa mini.) The…
I adapted the 3D Benchy holder from MasterNBC over on thingiverse. I removed the screw holes he had to fasten this holder to the bottom of a shelf and added a flat area that could be better glued or adhered with double sided tape. Print…
I noticed that there is actually a lot of unused space inside the Original Prusa enclosure, and I can always use more storage space in my small printing room. This shelf mounts behind the printer and adds a substantial amount of storage.…
A small display shelf I created to display some custom circuit boards for a tech expo. Two-piece design.
Push and twist right in place. Sits firm in place for no wiggle or movement. Holds in from the 9mm hole in the back of the Benchy. Holds 7-3 Benchys Screw/Tape option (4mm Screw Hole) 20%infill No supports STEPS: Rotate Benchy to the…
A small 2U rack mount shelf that mounts to one side of the rack. Fits a raspberry pi, or many other small IoT devices. The slots are intentionally generic so they can be used to velcro whatever device you want. Prints without supports.…
Soporta macetas pequeñas pero se puede escalar para soportar maceteros mas grandes.
here I have put together a wall mount for the Funko Pops figures from Kinder Joy there are 2 files once the house and once the 3 zack, which you have to print individually depending on which side you put the 3 zack on, you have to support…
The Lego brick shelf for kids room decoration is honestly just a copied version of Lego's original set of 4114 shelves (that is 10x scale). I made this to be able to print it and let you decor your kid's room for less price than buying…
Print in PETG using standard PETG printing parameters or some other tough plastic like ASA. I used Inland PETG and printed with Prusa's generic PETG parameters and infill 50%. Part is thin, so infill 15% will be fine. But, higher infill…
I was too lazy to replace my office duplex outlet with a GFCI or combo one, so I modified this design. If you use the sliced file, I tried to keep the supports to a minimum. Thanks, Jordanburgy, for the great design!
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE SUPERMAN SHELF This 3D shelf is a unique and modern design that allows you to display your items securely and stylishly. With a minimalist and elegant design, this shelf is perfect for…
A First-In-First-Out dispenser for food cans. Snaps together for hardware-free assembly. The modular design can be expanded to be as large and as small as needed. Please read the instructions before printing, as this design is quite large…
Hello, This is a hexagonal shelf system made of all 3D printed parts. The shelf can be assembled in such a way that it is self-supporting when sitting on a surface, or you can arrange it however you like and hang it from the wall. Keep in…
A shelf inspired by the shape of waves for storing towels. Dimensions of the shelf (LxWxH) 220mm x 102mm x 10mm Height for doble-sided tape 17mm Material PETG or Any Mounting: Add pieces of 10mm double-sided tape ( 3M tape recommended )…
Print with supports sideways, PLA was tested and works nicely in Cali.
If you have those wire shelves with adjustable height on round-grooved rods, you may have a need for replacement retainer sleeves. These are tapered on the outside, not tapered on the inside, with ridges inside that fit the grooves in the…
Need more space for equipments or some part of printed project? I didn't have enough space on my desk, so i made this model that can organise your desk too (If you gonna print on high speed use 2 tree supports on each sides of hexagon to…
Hello, Today I have a Stranger Things shelf for 12 Kinder Joy figures for you. The shelf is designed to display figures from Kinder JOY eggs. It is designed for 12 of these figures. If you have more, you can put them on top :-) Happy…
Thanks to Just Joshi for this original part. The Shelf has a depth of 18cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. For the 76cm Skadis board you take 2x 18cm + 2x…
In diesem formschönen Halter finden 4 kleine und 4 große Zippo-Feuerzeuge Platz. Die Ausschnitte sind 33 x 13 mm bzw. 40 x 15 mm groß. Da das Modell nicht besonders stabil sein muss, habe ich im Prusa Slicer je 3 Perimeter vertikal und…
This is a replacement fridge door shelf for shelves, that are mounted with U-hooks: Features: split in two parts, that can be connected with M3 screws & nuts. width from fridge door wall to wall must be at least 41cm exact width of shelf…
Why a Sample Library? Many amazing models can be printed to showcase all of the fantastic features and properties of 3d printing materials. Still, they all have the same problem of taking up space when you no longer have any of the…
Its a bit bigger than it needs to, but the the rectangular hole can be cut out easily. Then, it can be hammered in with medium force and then it fits perfectly. Print upside down.
To bring some order to the children's room :) Printed with Prusament PETG 0.4mm nozzle / 0.15mm layer height / 30% infill IKEA Bookshelf: https://www.ikea.com/ch/en/p/flisat-book-display-00290783/ TipToi Pen:…
Deutsch: Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand. Das Modell ist in zwei verschiedenen Größen verfügbar: 210 × 250 mm (für größere Regalbretter oder höhere Belastung) 160 × 190 mm (für kleinere…
Print in PETG for extra strength. It clips onto the vertical rails quite securely on it's own but also contains a hole for a screw for extra stabilisation if required for heavy objects. There are two versions, the triangular one will work…
A miniature shelf allows you to place small things. PLA/PETG plastic. Consists of 3 or 4 shelves fastened with 12 racks. 4 plugs are used as legs and top covers I think the assembly will be clear from the above drawings. Parts are held…
Bought a used HEMNES bed that was missing a bunch of these 110525 pins. Printed in two parts and then squezed together. Printed on Anycubic Kobra Neo with 0.4mm nozzle in PLA.
Needs to be mounted with double-sided tape (or something like UHU Patafix) because i didnt want to drill holes into my bath tiles The rescale version is to fit on a Prusa MK4
Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position
The little piece that make move the Rear Shelf of a Mitsubishi Colt car. Not as good as the original one but do the job. Printed without supports but with a brim.
Make this shelf either in single color or multicolor like shown in photos. Print upside down with no supports and scale to fit your printer if needed. Installation is easy and uses only two nails or upholstery pins; hold shelf firmly in…
EN: The bracket is suitable for mounting 20 cm wide shelves on drywalls. M5 dowels can be used as cavity dowels. The hole can be subsequently extended for larger M6 dowels. If you like my model(s) please leave me a like to support my…
This mug stand is designed to allow two rows of mugs to be displayed without worrying that the mug could fall off. It holds the mug in by using a lip that holds the bottom edge so that its less likely it could be knocked off (by a cat for…
Support for shelves. You have to make support for horizontal inner parts, You can put them for the circles too, but it is not necessary. It is not the best model, It needs sanding a little, but the result looks great on the wall, I…
I love Prusament, but got tired of the dessicant balls getting stuck in the Prusa Hexes on the spools. I have regular kitchen cereal dry boxes and used to keep the bottom filled with dessicant. Now this shelf separates the spool from the…
This is a leg extension for the HDX storage shelving unit from home depot. It extends the height by approximately 100mm. I printed mine with my Prusa Mini+ in PETG at 0.2mm layer height, no supports needed. The fit should be a lightly…
Storage shelf for up to 8 plates for the Tefal Snack Collection waffle / sandwich maker. I added the support beam after I printed the body to reinforce the structure. An improved model could have wider carriers and better support…
Keep your fridge tidy with this simple storage divider! Designed to separate items like bottles, sauces, snacks, or leftovers on fridge shelves. just print and slot it into place, no tools needed, and works with most fridges but designed…
Easy to print folding shelf for reduced spaces like campers, caravan or whatever and with no holes! RECOMENDATIONS Printed with PLA. Infill 20%. I used 0.2 layer. 2-3 wall count. The support face flat so the double face tape will stick…
Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…
printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…
I created a models of Shelf Brackets by Wolvie for everyone, who needs brackets for their shelves :-) I did 3 different sizes :-) This model I created entirely by myself, but I was inspirated by Wolverine and X-Men. I created 3 different…
A simple shelf to keep your flashdrives and sd-cards in reach
I designed this shelf to support a round woozoo fan on a square bedpost (2.25" or 57mm). I was planning to print it flat on the bed up-side-down, but it has a 220mm diameter. To fit it on the 250x210mm Prusa bed, I had to print it at a…
Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…
This is a shelf for the Argon Neo 5 (with NVME expansion) case for the Raspberry Pi 5. It has a ventilation duct in de back for case fan exhaust and a perforated bottom for the NVME heatsink. The mounting holes are designed for M3…
Hello friends from all over the world :) This is a remix of my Hexagon shelf for the first aid kit. With the keyholes in the back side, it’s easy to mount with two 4mm Wood countersunk screws (and two plastic anchors). Printed without…
Minimal design. Maximum strength. 📐 Dimensions (for your model page) Plank size used (based on your drawing): • Width: 12.6 cm • Height: 8 cm • Length: Optional / customizable Slot in the printed part is designed to match: • Slot width:…
This is a replacement for standard push fit medicine cabinet shelf holders. It is one of my favorite models because I think it really captures the ideals of 3D printing. One night I was awoken by a loud crashing sound from the bathroom.…
A simple, lightweight clip-on shelf divider for some 5mm glass shelves. Based on the design of the wire ones you can get from The Container Store, but I didn't want to try the metal on glass shelves. Created in OnShape; there's a larger…
I added a 3rd Lack table under the enclosure makig it taller and also put wheels. Whe long legs are simply original ones screwed together with original ikea double-screw. Put 2 very long screw from under the lower table for keeping in…
My wife got some pantry shelf food organizers from the company named Shelf Reliance , they are a product in the FIFO Collection . They work great except for oddball can sizes so I made a design to print my own dowels. Print without…
It occurred to me that there was wasted volume in the face of my fridge door so I designed this add-on shelf which “hangs” from the shelf above. Now I no longer need to wedge the tube of tomato puree and the little bottle of lemon juice…
IKEA Skadis Shelf panel 80x90mm light 15g version - 1mm thickness With three pegs for better statbility Printed with PLA on a Prusa Mini+ You can find my other Skadis accessories here :…
ENGLISH Bathroom organizer/shelf for shower gel, razor, soap, washcloth, hairbrush and much more. The sloping base plate allows the water to drain to the front. Water no longer accumulates under objects that are on an elevation. It stays…
Regalhalter für Holzbretter, sehr stabil und im Design ansprechend. Versteckte verschraubung für 3-3,5mm Schraubendurchmesser. Shelf holder for wooden shelves, very sturdy and attractive in design. Hidden screw connection for 3-3.5mm…
simple spool shelf (storage) using 16mm pvc pipe in an IKEA PAX (100cm), holes for 4mm screws with 8mm heads, add a support every 22cm and you have space for 3 spools in between, 5 supports for a 100cm wide IKEA PAX
This is a replacement for a metal bracket sold by Ikea: https://www.ikea.com/de/de/p/ikea-365-dosenhalter-weiss-10378346/ Compared to the original, this design takes up less space, allows for any shelf thickness and has the screws hidden.…
Hobby Paint Shelf (Divider/Extender): This is a was a simple quick design to print allowing me to stack the less stackable hobby paint bottles on my paint shelf rather than having them just side by side eating up more room than necessary.
The Suncast Vertical Shed wire shelf plastic clips will degrade and fall apart over time. I modeled replacement clips of various lengths in 2mm increments because the holes don't always line up. I also recommend replacing the screws with…
Modem/Router Shelf Really simple modem shelf. The shelf is glued to the wall with "Pattex Mounting Glue".
Insert for a caravan shelf, which doesn't have a lip or anything so things fall if you open the door. The insert is cca 230 x 100 mm , with a cutout for a hinge. There are two versions, V1 and V2. V1 is what I printed and the walls are 2…
Bookshelf for hanging on 20mm thick wood. e.g. Ikea-bed Print instructions It is recommended to use a 0,6mm nozzle to bring down the printing time to ~15,5hrs. The clips need some supporting structure and the overall used material is…
This version broke on my and I have remade it in Fusion 360. Please use this model insted!!! I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of…
Summary I have cats, and they are curious when the printer starts printing. So I needed a way to keep them out. What started out as taping some plexi glass to my IKEA Bror shelf turned into this. We'll see where it goes from here.…
Simple 1 screw mount for Dyson attachments, designed to be mounted on a horizontal surface like under a shelf or on a ceiling. Works with both standard and powered attachments.
It is a simple modern Shower Shelf is attached without drilling only with glue here is the link for waterproof glue:…
I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of printing I got this. Amazon.com: HDX 128974 36 in. W x 72 in. H x 24 in. D 5-Shelf Plastic…
The model car shelf / display is designed for the 1:41 models what you can get from Shell. It has some space so you can put a slightly bigger car into it as well. The hole parameters: clearance, normal fitting, ISO M3 The track has only…
Very simple L shelf, with and without supports. Not for heavy weight items.
I design this as a door entry way shelf. You can use it to kitchen, office, even in the bath room. Can be little complicating to print I tried to make it simple as possible in the printing instructions. If you don't want to do any tweaks,…
Hook should be mounted from the back of shelf in your wardrobe. Supports are recomended.
The shelf is designed for a wireless mouse like the my Logitech G Pro Wireless to hold the USB cable and wireless dongle when the mouse is in use and to store the mouse while plugged into the USB cable to charge.
Mount this shelf on your wall to hold your currently playing vinyl record. Not only functional, but also a good decoration for your space. Gussets are engineered to extend to the bottom layer for extra strength (probably over engineered).…
My original shelf for my LG Fridge Model No. GN-515GW broke as I was using it to store my heavy 3 liter milk bottles. Instead of replacing in kind, I made this more robust shelf to be able to carry the 8kg or more weight I often store on…
I've made this broomstick clothing shelf mount (with the letter M inside) for the ikea värde (Wall shelf, white, 50x140cm) We use the Wall shelf in our baby's bedroom, the broomstick is a nice addon to hang baby coat hangers on. The mount…
It was just a fun project for my wife. "a happy wife is a happy life" Original rubber ducks also fit, but only the small ones.
You need a M3 bolt + M3 threaded insert (OD 5mm, length 3mm…8mm). After printing, melt the threaded insert into the piece. Print “upright” for best quality (I found other orientations made the nut not fit exactly). No supports needed.…
