Liczymy pasujące modele…
Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…
Armoured Shelter This is a model I cut out the parts for around 10 years ago but never assembled. Then I got thinking, hey, why not build it in TinkerCad? Yeah! So that's what I did. Attached are two models. The main difference is one has…
This is a snap-close case for the heltec ESP32 WIFI_kit (this one: https://www.amazon.com/gp/product/B094MYK5DM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Should print like a charm, but if you need to relax the tolerances more I've…
Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.
gcode 10 hours is without brim gcode 12 hours is with brim
Heltec v3 case for 8000 mhA battery + on/off button + 2 part parametric antenna mast with insert & cover Designed to test different locations & antennas for a few days
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
Commercial Use and Attribution Notice: Alley Chat HT Pocket © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…
Update 24 April 2025: Added a 3k version with internal antenna space and no SMA. Update 30 July 2024: Added desk mounts and Baofeng clips that take M2.5 nuts. Commercial Use and Attribution Notice: Alley Chat HT Slim © 2024 by Alley Cat…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
Commercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…
Commercial Use and Attribution Notice: Alley Chat HT114 Pocket Pro © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
muzi.works' [H1 - Case for Heltec V3 running Meshtastic] is a great design, but my battery couldn't fit in it, so I remixed its case. If you are like me and have trouble with the battery being too big, you can consider it. This case is…
Sestavení/Assembly Vložení dvanácti M3 závitových vložek pomocí páječky. / Inserting twelve M3 threaded inserts using a soldering iron. Vložení elektroniky - je potřeba zkontrolovat, jestli USB-C konektor sedí do rámu. / Inserting the…
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4). Includes 3000mAh battery, antenna, and PCB board. M2.5 self-tapping screws required. Personal use only. Commercial rights and custom design: [email protected] Will be…
This is the H1+ case modified to fit common 18650 batteries and with added compatibility with the newer Heltec V4 module. Similar to my previous model. Made with the request of and help from: @JLO_2137313 Also added separately printable…
Commercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Remix of H1+ case for Heltec v4 with space for 2 x 18650 batteries in two versions - with lodgement or without it. Based on version for antennas up to 15mm in diameter at the base. Needs 2 M3x12 if you planning to use clamp. Best to use…
***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…
Pferde Unterstand - Horse shelter for Schleich horses easy to print, easy to assemble Print instructions Rafts:No Resolution:0.3 Filament: any PLA or PETG
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…
Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.
Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
***Redesign 03/01/2026*** Button base was rounded to avoid warping of corners. Fillet was added to the cover's side posts to re-enforce weak spots. Middle frame was redesigned to apply even pressure despite battery size which was…
UPDATE: New version is up that includes less fiddly buttons, they print flat now and should be easier to glue into place. I made them a bit bigger too. Old version files included in /old. I wanted a portable case for my new Heltec Lora32…
Case with battery
A form-fitting snap together case for the Heltec v3 meshtastic radio with OLED display that fits a makerfocus 3000mAh battery nicely. It's a close fit, so take your time putting it together. I tried to adjust some tolerances to make it a…
UPDATE: I took out the lump because it wasn't really needed and gets in the way of most lanyards and some mods. Added a version that works with M2.5 nuts for the Baofeng clip. I based it on the style of the holsters for my Alley Chat HT…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I took the previous model and updated it for the newer USB-C connection and made room for an antenna on the case.
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
The TextMesh Device, built around the Heltec LoRa V3, offers essential functionality in a portable, stand-alone design. Equipped with GPS, a buzzer, a 3000mAH battery, a keyboard, and a power switch, it's designed to be straightforward…
Easy to print, no support cave with window, for shrimps and small fish with window
These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission. Please respect the Creative Commons license restrictions I have chosen…
This is a minimal case for the Heltec Wireless Tracker with a lipo battery. The user and reset buttons are supported, and the USB-C charging port is easily accessible. Each corner has support for a wriststrap, rubber band, or elastic to…
This is an enclosure for the Heltec Tracker, takes a 3.7v 1350mAh Battery (appx 3.8mmx6mm). Two heights are included - a short one for out of the box use and a tall one incase you added pinheaders so you can hook up additional telemetry…
Original model for the Heltec V3 by Muziworks: https://www.printables.com/model/741974-h1-case-for-heltec-v3-running-meshtastic This is a modified version of the original H1 case by Muziworks. I wanted to play around with a Heltec V4…
This case is designed for the Heltec LoRa V4 boards and uses M2×10 screws for assembly. The “Standard” model works well for small batteries or USB-powered setups. The “Battery Extended” version moves the keychain loop outward to create…
Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
I wanted a case for my Heltec V3 that would be suited to carrying in a pocket or sitting on a desk while having a good battery life. This case is designed to be long in order to have the Heltec and 18650 end to end instead of stacked. I…
I was looking for a minimal case for the Heltec LoRa 32 module. The cases I found either also offered room for a LiPo and a power switch, were not designed for the new solid LoRa antenna, or the module just did not fit properly. So I…
Made the bottom case a bit bigger to accommodate an 2000mAh battery and widened the screw hole to allow for a threaded insert and changed the front and buttons to allow for the insertion of the Heltec T114 with its protective plastic…
Commercial Use and Attribution Notice: Alley Chat HT114 Pocket © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…
18/09/2025: I have some of these complete and ready to go on eBay if anyone is interested: eBay Listing Update 18/08/2025: Made some slight changes to the front case, giving the battery pack a little more room, approximately 1.5mm of…
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case. 18650 Li-Ion battery holder included (for longer protected 18650 battery). I recomend connect some high-gain antenna (some better and bigger than stock one…
Heltec LoRa 32 V3.1 mockup model. Dimensions measured by hand. Accurate to about 1mm. Heltec LoRa 32 is a popular device for Meshtastic Project . However, the manufacturer provided drawing has wrong dimensions. And the free 3d print case…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
I based it on the style of the holsters for my Alley Chat HT Pocket, and I think it goes really well with the H2T design. Baofeng Belt Clip Generic Belt Clip Heat Set Inserts This is a new work completely owned by myself, but I am…
Remixed from V1.1.1 Original design is epic - but the weird grip on the side and all the text felt really distracting for such a small case. Updated 2024/04/17 to add space for the screen - should help prevent cracking but no guarantees -…
Let me introduce you to my custom-designed enclosure for the Heltec Wireless Paper. This enclosure is versatile, accommodating larger batteries, and features a simple button design on its side for easy operation. Hardware: - Heltec…
This is a simple hook that attaches to the inside of many hub-style ice fishing shelters or tents. It was created for an Eskimo FatFish 949ig, but it should fit most hub-style shelters. I believe Eskimo poles are 11mm in diameter. I don't…
Created this model to allow my shrimps to hide from other fishes and for them to be able to hide from the direct light. They seam to like it quite a bit. Print settings: Nozzle: 0.4 mm Layer height: 0.2 mm Supports: No Wall thickness: 0.8…
This case was designed to hold a Heltec V3 lora board and a MakerFocus 3000 mAh 1S lipo to be used with the Meshtastic node network. It is slim and easy to carry in your pocket and with a large battery should last a long time between…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.
Collection of shrimp houses
A heltec case designed to be small but have a bit more of a useable battery tray. Visit us: Gendemik.co.uk Newer stl files can be obtained at the link above. Tried and tested as a daily driver and used by a few of the UK NW meshtastic…
This holder allows you to put your Heltec anywhere you want and inside any enclosure you choose. Just use either superglue, double sided tape or even velcro? Just feed the battery plug through the bottom hole at the back and plug it into…
Case for Heltec Wireless Paper, there are so few cases for it, so I decided to make one and share it here. My goal was to make it as slim as possible. Final size of the case: 46mm x 87mm x 18mm and only around 60g with the board and the…
Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…
A snap on case for Heltec LoRa 32 V3.1. This model has an updated version that has better tolerances. Add a standard cheap 18650 holder and it's good to go. Battery holder size (with battery) 78mm*21mm*22mm. Print with PLA or PETG.…
I bought a few Heltec boards and wanted to print some cases. Found a few already on Printables but i found a few problems: there are big, hard to print or not fitting the bigger antennas that were in my kit. The goal for this case was:…
The enclosure is designed for the Heltec V3 or Heltec Tracker. The bottom part of the enclosure is common to both variants. The enclosure is sufficiently dimensioned for a 26650 battery. Both parts hold together by self-clamping.…
Heltec Wireless Stick (Lite) v3 case Parts needed: Heltec Wireless Stick v3, either in the Lite or "normal" version including the antenna cable. 4 ruthex style M3 inserts, d=4.6mm, h=5.7mm 4 M3x12 screws, all kinds with flat heads should…
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
A simple enclosure for the Heltec v4 (w/ screen) with a keyhole slot on the back to hang from a nail. Includes a hole for an SMA connector as shown in the photos.
Simple, discreet case. Requires brass threaded inserts and M3 screws. 4,6 or 8mm in length. This is my first upload. A version that can hold a LiPo will be added shortly. Free to download, free to remix, and free to share with friends.…
Simple mobile/pocket enclosure for a Heltec T114 board with an 18650 battery. Most models place the battery behind the board, resulting in a bulky enclosure. This is about as compact as possible. Assembles with eight M3 heatset inserts…
The H3 case features the following modifications over the H1, based on my own experience printing and using the H1 case, and user feedback accumulated from the original model's makes, remixes, and comments. Multiple sizes to accommodate…
An awesome case for Heltec LoRa 32 V3 originally made by Alley Cat This is a remix version of mine for a larger battery (58.6mm x 39.8mm x 9.3mm), note that the accessories from the original creator will not fit. There is another remix…
This is a slight modification of Alley Cat ( https://www.printables.com/@AlleyCat )'s Heltec LoRa 32 V3 HT Slim Case found here: https://www.printables.com/model/936437-heltec-lora-32-v3-ht-slim-cases I didn't have a right angle SMA…
This is a case for the Heltec T114 v2 with MakerFocus 3000mAh battery. Designed for the use as a Meshtastic or Meshcore node. Before you start: This model has very small tolerances - Accurate printing required. If you are unsure, scale it…
Printed on a Bambu P1S with Standard or Optimal print profile. I have only tried PLA for this build so far. Please note that the tolerances are pretty tight to ensure a good fitment. Flash the Meshtastic Firmware to your board, install…
Parametric Heltec V3/V4 Case (Meshtastic) This is a fully parametric remix designed to house Heltec V3 and V4 boards for Meshtastic nodes. It features a customizable enclosure that has been tested to scale from 60x40x30 mm all the way up…
Description Compact printed case for Heltec V4 Meshtastic client with GPS. External dimensions are 74x44x21.7mm. This case meant to be used with this default Heltec V4 GPS set: Required BOM 803048 Li-Po battery (consider buying with…
Here are two versions of a basic case for the Wireless Stick Lite V3 with USB-C port. Both snap together. Buttons are untested, but should work. Might need to be sanded down. They work for either case style. Versions: Basic case: Holes…
I wanted a compact case to house a Heltec V3 and an 18650 battery. I was unable to find one I liked, so I designed one. This was designed in OnShape if you would like to make some alterations. Features Changeable faceplate Battery Kill…
Стационарный кѾрпус для Heltec V3-V4 c воможносью установки энкодера, клавишного переключателя, двух аккумуляторов 18650 либо один 21700. Клавишный переключатель: https://ali.click/hl1puq Рекомендации по печати: Высота слоя 0.2 Без…
(Files are updated on 8 April 2024) These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family members, friends and make the…
This is a remix of another case that has better clearance for a 1100 mah makerfocus battery and cleared up some space so that the antenna connector nut could actually be tightened! I uploaded the solidworks files as well but they are…
Small, simple building for H0 1/87 scale modelrailway. It could be a shelter for railroad worker but also a garden shed. Print all pieces and glue it together. Depending on your printer, support and brim can be useful for the walls…
A slip case for Heltec Visionmaster E290: Easy to print, comes with several variations: Slim and fat designs. The slim design has 6mm clearance between the top of the LoRa transceiver module and the case back The fat design has 23mm…
A snap on case for Heltec LoRa 32 V3.1. For LiPo batteries. Currerently has 2 versions for 103450 and 103655. Battery size: 103450: 10mm*34mm*55mm with protection board. 103655: 10mm*36mm*67mm with protection board. Print with PLA or…
How to and schematics in progress! WARNING! This is a pretty advanced build! You have to know your way around with soldering lots of tiny and fragile wires, electronics etc. There is no programming involved but you need a steady hand and…
This case allows to fit heltec v2 and v4 fitted. I used M3 * 12 screws. The battery is a 1500mah lipo.
Released on 16 Feb 2024 by Blueskies . Improved version on 22 June 2024 These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family…
This is a case for a dev board with ESP32, a LoRa chip and an OLED made by Heltec, the board might not work the most well built, but it's handy for experimenting. The board often comes with a small coil antenna with a IPEX connector so I…
This is a case that fits a Heltec T114, a GPS module, a buzzer, a button, and a battery so you can take your Meshtastic node with you everywhere. The buzzer is connected to GND and pin 08. It's used to get a beep every time you get a new…
Inspired by my friend Z3R0, this case for the Heltec v3 meshtastic board fits inside of a ZYN can. With just enough room for the included antenna and a 750mAh battery (503048). The whole assembly can come out for charging or you could cut…
![Meshtastic Standalone Device (Heltec V3 and Cardkb) [Meshdeck]](https://media.printables.com/media/prints/803986/images/6459706_a756ded2-7dd3-4856-8af2-bbd2ee8fef3c_9954f23c-ca71-4b85-b556-1f18f027c796/meshtastic-standalone-2.png)
